How to Update the C# dll in LabView

Hi.,
 i created C# dll with "ADD"  Function. in that dll contains only that function. for that function i am passing two variables.
 "public int Add(int A, int B) "
in the Labview, i use the .NET constructor(Drag and drop the node and in the dialog box i browse the .net dll) and Invoke node to access the
method it's working fine..
Now the Problem, After build the dll i added some more function in the c# dll.
"public int Sub(int A, int B) "
In the labview i can't see the new method in the "Invoke Node". so in the ".NET Constructor" dialog box i browsed the same dll but i got the Message "The version of assembly you requested was automatically  promoted to a newer version by the .net runtime engine"
the newer version of the dll not updating. How to get the newly added function.
Please help to fix this problem

Try to delete the constructor, save the VI, add a new constructor and select your dll again.
It's a workaround proposed here : http://forums.ni.com/ni/board/message?board.id=170&thread.id=229618
Regards,
Gilles K.
Electronic System Engineer, Renault F1

Similar Messages

  • How to use matlab compiled DLL in Labview ?

    I have LV 8.5, and am unable to use a matlab compiled DLL in my LV code. I have tried the 'import'  command, but it does not list any functions. However, it does not show any errors during its execution. The existing solutions/responses to this question do not work either. I would also like to know of a way to deal with mxArray datatype. What is its equivalent in C (or any other high-level language) ? How do I retrieve an array that is returned from the matlab dll ?

    I'm assuming you have either Matlab installed or at the very least the Matlab Runtime, otherwise the DLL won't work. The "import" command relies on having a header file. Do you have one? You also need to make sure the DLL has been compiled so that it's compatible with LabVIEW. The most likely problem is name mangling, which also occurs when you try to compile a DLL written in C++. See this post, which contains links to useful posts.
    The mxArray datatype is a special datatype which is actually a structure. It's complicated. Your best bet is to create a C DLL that acts as an intermediary between the Matlab DLL and LabVIEW. If you are able to, you can, instead, simply call the Matlab code directly using the Matlab script node.

  • How to update the table value in the valuechange event?

    I have an input field in the datatable with the valueChangeListener
    <rich:dataTable id="cart" value="#{cart.cartList}" var="item">
    <h:inputText value="#{item.cost}" id="qty" valueChangeListener="#{items.updateCost}" onchange="submit()">
    <h:outputText value="#{item.errorMsg}"> </h:outputText>
    in the backing bean
         Item item = (Item) model.getRowData();
    // do some update, if the cost too larger, change to max_cost
         item.setCost(max_cost);
         item.setErrorMsg("Error Msg");
    After calling the valuechange method, the screen output doesn't update the cost.
    How to update the table value in the valuechange event?

    As you're misusing the valueChangeListener to set another input field, you need to skip the update model values phase. Otherwise the value set in the valueChangeListener will be overridden by the submitted value. You can do this by calling the FacesContext#renderResponse() inside the valueChangeListener method. This will shift the current phase immediately to the render response phase, hereby skipping the update model values and invoke application phases.

  • How to update the condition price in the sales order for all the items

    Hi,
    How to update the condition price for all the itmes in the sales order to carry out the new price automatically through a stand alone program, for all the orders in the billing due list table?
    Thanks,
    Balaram

    Hi,
    There is a change in the requirement.
    Scenario:
    I have created a sales order with some 4 condition types, in that 2 condition types are of class A & B and the other two is of class C. Here I need to update the condition price of class A & B only and the remaining condition types should not get update even though there is an updated price is available.
    For the above scenario, I need to write a standalone program. Do we have any function modules to update the price of the single condition in the sales order? Please tell me how we can update the sales order at item condition level.
    Thanks.
    Balaram

  • How to update the condition price in sales order while creating the invoice

    Hi,
    How to update the condition price in the sales order to carry out the new price while creating the invoice?
    While creating the invoice it should update the condition price in sales order.
    Thanks,
    Balaram

    No, pricing is not there in delivery.
    I found an exit for VF01transaction where we can update the price in order.
    Can you please tell me how to update the price if I have the order, material numbers and conditions number?
    Thanks,
    Balaram

  • How to update the inventory after committing order..?

    How to update the Inventory stock level of a commerce item after committing the order.. in ATG 10.0.1..?
    Thanks in Advance,
    Vishnu & Nithin Kayithi

    you can add the pipeline chain after the processOrder in the commerce pipeline , in the runProcess method call InventoryManager.decreaseStockLevel(String pId, long pNumber);

  • How to update the data in sqlserver table using procedure in biztalkserver

    Hi,
    Please can any one answer this below question
    how to update the data in sqlserver table using procedure in biztalkserver
    while am using executescalar,typedprocedure getting some warning
    Warning:The adapter failed to transmit message going to send port "SendtoSql1" with URL "mssql://nal126//MU_Stage2?". It will be retransmitted after the retry interval specified for this Send Port. Details
    Please send me asap....
    Thanks...

    Hi Messip,
    A detailed error would have helped us to answer you more appropriately but
    You can follow the post which has step by step instructions, to understand how to use Stored Procedure:
    http://tech-findings.blogspot.in/2013/07/insert-records-in-sql-server-using-wcf.html
    Maheshkumar
    S Tiwari|User
    Page|Blog|BizTalk
    2013: Inserting RawXML (Whole Incoming XML Message) in SQL database

  • How to update the BOX version of the Logic Pro 9 in Mountain Lion??

    Hi!
    How to update the BOX version of the Logic Pro 9 in Mountain Lion?
    For example,  if tomorrow will be new updates for Logic Pro for exapmle 9.1.8. (now I have 9.1.7) Will I not able to get it?? Now should I buy the second Logic pro??
    Recently I have got answer from App Store support:
    "Max, since you have not purchased the app in the App Store, you can't get updates directly in App Store. In this case, you will need to purchase the updated version in the App Store so you can get further updates."
    It's... I bought Logic Pro 9 + MainStage +  + +++ .... in the Apple Retail Store and what now?? Updates works perfect in Snow Leopard.
    I can't understand...
    Can you help me please? =)

    Max,
    Rest assurred, you will get updates via the App store. What will happen is when you install the box version, the Mac App Store will ping when there is an update to download(for free), much like any other Apple app(Garageband, iWork, etc) regardless of where you bought it from. If it's installed, it will check for updates.
    If the Mac App store doesn't show an update that you know is out, simply down it directly from support.apple.com and apply it.
    Hope this helps. If so, LIKE the post.
    Glenn

  • How to update the FB01L transaction using the FM  bapi_acc_document_post

    Hi All,
            How to update the FB01L transaction using the bapi_acc_document_post but there is no ledger group field in the bapi function module.
    Please help me how to do it.

    hi,
    use batch input method for the same.
    check this.
    [https://forums.sdn.sap.com/click.jspa?searchID=19107237&messageID=884744]

  • How to update the iTunes in the iPad using the I pad

    How to update the iTunes in the iPad using the I pad?

    Then you cannot update without Conecting to iTunes on a computer.
    The Over the Air Feature is only available on iOS 5 or later.
    You have iOS 4... See Here...
    http://support.apple.com/kb/HT4972
    OR...
    Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch

  • HT4972 hello friends i have a problem in my ipod touch it has 4.2.1 version of software but it doesnot supports any aps so how to update the ios please anybody help me..

    hello friends i have a problem in my ipod touch 3g it has 4.2.1 version of software but it doesnot supports any apps so how to update the ios 5 or more than this please anybody help me..i am in trouble.

    I suspect you really have a 2G iPod. Those can only go to iOS 4.2.1.
    Identifying iPod models
    iPod touch (3rd generation)
    iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
    The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.
    Otherwise connect to yor computer and update via iTunes. Yo need iTunes 10 or later on the computer.
    To more easily find compatilbe apps for 4.2.1
    iOSSearch - search the iTunes store for compatible apps.
    Vintapps 3.1.3 - paid app.
    Apple Club - filter apps by iOS version.
    Discussion post by msgarmar - technique to sort apps by date.

  • How to update the bucketset of business rules in MDS through Rules SDK

    How to update the bucketset of business rules in MDS through Rules SDK.
    Any sample code which will help me........ :)
    Is it possible to expose a Business Rule as webservice which was created with the help of Java fact?
    Edited by: 984804 on Jan 29, 2013 6:12 PM

    FYI, the output of this call returns something like:
    <?xml version="1.0" encoding="UTF-8"?> 
    <queryplan>
        <union>
            <fullOuterJoin>
                <statement index="1">SELECT 'FY' || to_char(SALES.invoice_date,'yy'), count( distinct SALES.inv_id) FROM SALES GROUP BY 'FY' || to_char(SALES.invoice_date,'yy')</statement>
                <statement index="2">SELECT 'FY' || to_char(SALES.invoice_date,'yy'), sum(INVOICE_LINE.nb_guests) FROM SALES, INVOICE_LINE, SERVICE_LINE, SERVICE WHERE ( SALES.INV_ID=INVOICE_LINE.INV_ID ) AND ( INVOICE_LINE.SERVICE_ID=SERVICE.SERVICE_ID ) AND ( SERVICE.SL_ID=SERVICE_LINE.SL_ID ) AND ( SERVICE_LINE.service_line = 'Accommodation' ) GROUP BY 'FY' || to_char(SALES.invoice_date,'yy')</statement>
            </fullOuterJoin>
            <fullOuterJoin>
                <statement index="3">SELECT 'FY' || to_char(SALES.invoice_date,'yy'), count( distinct SALES.inv_id) FROM SALES GROUP BY 'FY' || to_char(SALES.invoice_date,'yy')</statement>
                <statement index="4">SELECT 'FY' || to_char(SALES.invoice_date,'yy'), sum(INVOICE_LINE.days * INVOICE_LINE.nb_guests * SERVICE.price) FROM SALES, INVOICE_LINE, SERVICE WHERE ( SALES.INV_ID=INVOICE_LINE.INV_ID ) AND ( INVOICE_LINE.SERVICE_ID=SERVICE.SERVICE_ID ) GROUP BY 'FY' || to_char(SALES.invoice_date,'yy')</statement>
            </fullOuterJoin>
        </union>
    </queryplan>

  • How to update the second JComboBox according selection in first JComboBox??

    I am having a hard time to update the second JcomboBox according to the selection of the first JcomboBox. For example, the content of the first JcomboBox is {city, rent}. When "city" is selected, the content of the second JcomboBox should be set to a number of cities. When "rent" is selected, the content of the second JcomboBox should be set to a range of rent.
    Since I have to detect the selection in actionperformed(), where the JcomboBoxes have been added to a Panel, and my JFrame setContentPane() to this Panel, I don't know how to update the JFrame or the Panel. I can make the old JFrame disappear and a new JFrame appear instead, but this is not what I want. I tried method update(Graphics) and removeAll(), and never made it work.
    I would greatly appreciate if anyone could give me any help.

    Thanks for your response. I fixed the problem in the following clumsy way:
    frame.getContentPane().remove(mainPanel);
    mainPanel.remove(box2);
    if(box1.compareTo("city")==0)
    box2 = new JComboBox(cities);
    else if(box1.compareTo("rent")==0)
         box2 = new JComboBox(rents);     
    else if(box1.compareTo("type")==0)
         box2 = new JComboBox(types);
    box2.setBounds(305, 30, 90, 20);
    mainPanel.add(box2);
    frame.getContentPane().add(mainPanel);
    Maybe there is a better way, but I don't know, and I don't understand your suggestion, could you further explain it? Thanks a lot.
    lz22

  • How to update the posted documents with Business Area wise

    Dear experts
    Please suggest me how to update the posted documents with Business Area wise
    Ajeesh.s
    Moderator message: please do more research before asking, show what you have done yourself when asking.
    Edited by: Thomas Zloch on Nov 2, 2011 2:26 PM

    Hi,
    Select all your folders in Disco Administrator,ALT+ENTER to go to properties, then change the database from the default database to the remote database.
    Hope that helps,
    Rod West

  • HELP!!! i need help on how to update the core applications and system software.

    can anyone help me update my software for a blackberry curve 9300. i need to updat the core applications and the system software but i dont know how to do so. do i do it by my desktop or device

    Hi and Welcome to the Community!
    The simplest way is this:
    KB16068 How to update the BlackBerry Device Software through the web
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for