How to upload data for custom infotype
Hi Friends
Can we use HR_INFOTYPE_OPERATIONS FM for custom infotype too or is there other way or other Standard FM to upload data for custom infotype starting with 9000..etc.
Points will be there for sure.
Thanks
Meeta & Roopa
Thanks for quick response.
my qns is can we use Standard FM like HR_INFOTYPE_OPERATIONS for custom infotype too ?
in my requirment input will come from portal form and in background Java Wd is going to use these FM but i have this big doubt can we use these standard FM for uploading data in custom infotype as well or else is there any other way.. but for sure we can't use BDC and LSMW in this requirement .
Thanks Meeta & Roopa
Similar Messages
-
Logical database PNP not retrieving data for custom infotypes.
Hi all,
I am using logical database PNP in a program. I have declared infotypes as follows:
INFOTYPES: 0001, 0002, 0041, 9801, 9840.
The problem is that the logical database is retrieving data for the standard infotypes but not for the custom infotypes. Any explanation as to why data for custom infotypes is not being retireved and how this can be solved will be greatly appreciated.
regards,
Hamzasolved
-
IDOC :: how to send data from Custom Infotype in SAP HR to third party
Hi,
I have created one custom Infotype by number 9020. How to send data from this infotype to third party system and also change pointers need to trigger for this infotype.
Please help me in doing it.
I am using one Custom Message type ZTALENT and Custom Idoc Type ZTALENT.
ZTALENT Talent Management
5 E1PLOGI Header for an HR Object (Master Data or Organizational Data)
5 E1PITYP HR: Transported Infotypes and Subtypes for an Object
ZPUSER User base Data File
ZPERSON Personal Information File Segment
ZPOST Position File
ZOPE Overall Performance
ZPWORK Outside Work Experience
ZPEDUC Education Details of Employee
E1P0000 HR: HR Master Record Infotype 0000 (Actions)
E1P0001 HR: HR Master Record Infotype 0001 (Org. Assignment)
E1P0002 HR: HR Master Record Infotype 0002 (Personal Data)
E1P0016 HR Master Record: Infotype 0016 (Contract Elements)
E1P0022 HR Master Record: Infotype 0022 (Education)
E1P0023 HR Master Record: Infotype 0023 (Other/Previous Employers)
E1P0041 HR Master Record: Infotype 0041 (Date Specifications)
E1P0105 HR: HR Master Record Infotype 0105 (Communications)
ZE1P9020
ZPLANG Language Details
ZACTION Actions Changes
Regards,
KrishnaHello Shankar,
Technically TEMSE files are read by calling the following 3 function modules in sequence,
1) RSTS_OPEN_RLC or RP_TS_OPEN: open the temse object
2) RSTS_READ : read the object
3) RSTS_CLOSE: close the object
Regards,
Rajesh -
How to upload data for me01 using lsmw recording method
*dear expert please tell me the complete procedure for how to upload data in me01 transaction using lsmw recording method.
Moderator Message: Duplicate post locked.
Edited by: Vinod Kumar on May 8, 2011 7:56 PMHi,
To be honest I don't understand your question. When You execute LSMW and create project, then all steps are shown in a very clear way with good description. With which one you have problems?
Best regards
Marcin Cholewczuk -
Set default dates for custom infotypes
Hi .
can anyone suggest me to how to set default dates endda and begda to an custom infotypes.
early rsponses heghly appreciate.
Moderator message: please do more research before asking, show what you have done yourself when asking.
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Aug 23, 2011 1:33 PMIf you want the default dates to show when creating or Copying a record, use Customer Exit ZXPADU01
-
How to get data for custom feilds for standard datasource
i have extracted CRM standard datasource 0CRM_OPPT_I.
In RSA6 i slected feilds which i want to trnasfer to B Iand i also added some custom feilds.
and then i went to RSA5 and i activated datasource.then i went to RSA3and i extracted.
In rSA3 selection screen all the custom feilds are selcted.
after extraction if i go to LIST,only some of the custom feilds data is displaying remaining feilds displayed as blank data
please tel me how to get data
Thanks in advance
HPHi Hari,
Sorry for late reply.
Once you have done the proper mapping by using the transaction BWA1
you need to write the BADI code which can be accesible from the following path:
Go to transaction SPRO
SAP Implementation guide ->Integration with other mySAP components ->Data transfer to the Business Information Warehouse->
Settings for the application specific datasources (CRM) ->
Settings for BW adapter->Execute Badi :BW adapter :Enhancement of datasources in messaging flow.
Select you the datasource enhancement implementation it will open the BADI Implementation..
go To interface tab and double click on the method..it takes you to the ABAP screen where you need to write the logic to populate the custom fields..
Please feel free to mail back if you have any quries.
All the Best..
Thanks
SK -
How to upload data for me01 using LSMW BDC METHOD
*hi export please tell me the complete procedure for uploading data in me01 using LSMW BDC METHOD*
Moderator message: please search for available information/documentation.
Edited by: Thomas Zloch on May 8, 2011 10:06 PMHi,
To be honest I don't understand your question. When You execute LSMW and create project, then all steps are shown in a very clear way with good description. With which one you have problems?
Best regards
Marcin Cholewczuk -
Can any body tell me how to upload data for infotype 2011
hi gurus,
please tell me hw to create the bdc for infotype 2011.Go to SHDB and record the Tcode PA30 with Infotype 2011.
~BiSu -
How to upload data into an infotype?
hi all,
I have upload the data from an text file into infotye IT0169. for this i have to i have used HR_Maintain_Masterdata. Here im able to insert the data but not able to modify the existing records. how can i achieve this. does HR_Maintain_Masterdata not modify or update the existing records if no then is there any other FM?
another issure is
In case of insert i have fields like Pernr. begda, endda, subtype , BEN_PCT.
after the function call all data gets inserted into the fileds of infotype except theBEN_PCT field.
Can u please provide pointers on this too
TIAhi
You can modify data using HR_MAINTAIN_MASTERDATA
Just check the below code. It might help.
CALL FUNCTION 'HR_MAINTAIN_MASTERDATA'
EXPORTING
PERNR = NUMBER
ACTIO = OPERATION
TCLAS = TCLAS
BEGDA = VALIDITYBEGIN
ENDDA = VALIDITYEND
OBJPS = OBJECTID
SEQNR = RECORDNUMBER
SPRPS = LOCKINDICATOR
SUBTY = SUBTYPE
WERKS = WERKS
PERSG = PERSG
PERSK = PERSK
LUW_MODE = LUW_MODE
DIALOG_MODE = DIALOG_MODE
NO_EXISTENCE_CHECK = 'X'
NO_ENQUEUE = 'X'
IMPORTING
RETURN1 = RETURN
TABLES
PROPOSED_VALUES = PROPOSED_VALUES
MODIFIED_KEYS = MODIFIED_KEYS
EXCEPTIONS
OTHERS = 0.
It has additional import parameters:
WERKS = WERKS
PERSG = PERSG
PERSK = PERSK
regards
Nishant Malhotra -
Uploading data in standard infotype for many pernrs.
how to upload data for many pernrs through a single fm in a standard infotype ????
please help me...CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
INFTY = '2010'
NUMBER = P2010-pernr "wa_ot_calc-pernr
VALIDITYEND = P2010-endda "wa_ot_calc-zotdate
VALIDITYBEGIN = P2010-begda "wa_ot_calc-zotdate
RECORD = P2010
OPERATION = 'INS'
DIALOG_MODE = '0'
NOCOMMIT = 'X'
IMPORTING
RETURN = BAPISUBRC.
IF SY-SUBRC <> 0 OR
NOT BAPISUBRC IS INITIAL.
MESSAGE ID BAPISUBRC-ID
TYPE BAPISUBRC-TYPE
NUMBER BAPISUBRC-NUMBER
WITH BAPISUBRC-MESSAGE_V1
BAPISUBRC-MESSAGE_V2
BAPISUBRC-MESSAGE_V3
BAPISUBRC-MESSAGE_V4.
ENDIF.
i resolved the error im gettin for table declaration but now d fm is not executing properly
after execution it gives error message : Enter a Quantity.
i dont knw frm whr it is coming.........im passin d values to table as:
MOVE wa_ot_calc-pernr TO P2010-pernr.
MOVE '1006' TO P2010-subty.
MOVE wa_ot_calc-zotdate TO P2010-endda.
MOVE wa_ot_calc-zotdate TO P2010-begda.
MOVE sy-datum TO P2010-aedtm.
MOVE sy-uname TO P2010-uname.
MOVE wa_ot_calc-not_hrs TO P2010-stdaz.
MOVE '1006' TO P2010-lgart.
is anythin wrong in this..? -
BDC Program for Uploading Data for Property Tree in cg02
Hi,
How to upload data for property tree ( standard Properties ) of CG02. I checked for BAPI or Function Module but most them supports for specification header and sub item.
Please Let me know if any function module or BAPI available for this process. I tried with BDC Program, but it fails.
Regards,
Rajesh Kumar MurugesanHallo Rajesh
take a look here:
http://help.sap.com/erp2005_ehp_06/helpdata/en/c1/eda0f591ec12408b25e7a1b369ca45/frameset.htm
Chapter "Import and Export".
1.) Reads cross these further chapters:
"Tools (EHS-BD-TLS)" => "IMport and Export" => "Import: Process" => "Specifying the Sequence of the External Data Structure " => "External File Structure: Specification"
Here you will learn how to prepare the data. In chapter:" Example: Transfer File for Specifications" you will find an example of an file whcih could be used to upload data in the property tree
2.) Chapter:" Importing Specifications" is explaining the steps whcih are need to populate the property with data using the file as prepared; read cross chapter "Specification Import Control"
I hope this helps.
C.B.
Edited by: Christoph Bergemann on Feb 4, 2012 6:59 PM
Edited by: Christoph Bergemann on Feb 4, 2012 6:59 PM -
Customized LSMW (Batch Input Recording) to upload data for Vendor
Hello Fiends,
can u help me on this object and how to upload in xk01.
Customized LSMW (Batch Input Recording) to upload data for Vendor Master using Transaction code XK01
With best wishes,
Chandu.
Point will be rewarded....Hi,
Go through the following link, you will find your answer
http://www.sapbrain.com
Regards,
Bhaskar -
How to upload data in a custom table in quality server
Hi All,
I want to upload data in custom table in quality server.
I forgot to tranfer TMG into QA. I also don't send any upload program to QA.
Is there any way to upload data directly to table in quality server i.e. by use of debugging.
Regards,
NarendraHi Narendra,
As suggested by Jorge you can create data through T-code SM30 (for this you need to have table maintainence generator in development) and get it tranported to Quality and production and maintain the data through it or else to can create a request for data creation through SM30 in development and get it transported to quality and production.
Thanks,
Chinmay -
How to populate date & time when user enter data for custom table in sm30
Can anyone tell me How to populate system date & time when user enter data for custom table in sm30..
Req is
i have custom table and using sm30 user can enter data.
after saving date i want to update date & time in table
Pls let me know where to write the code?
Thanks in AdvanceYou have to write the code in EVENT 01 in SE54 transaction. Go to SE54, enter your Ztable name and in the menu 'Environment-->Events'. Press 'ENTER' to go past the popup message. In the next screen, click on 'New Entries'. In the first column, enter 01 and in the next column give some name for your routine(say UPDATE_USER_DATE_TIME). Then click on the souce code icon that appears in blue at the end of the row. In the code, you need logic like below.
FORM update_user_date_time.
DATA: f_index LIKE sy-tabix.
DATA: BEGIN OF l_total.
INCLUDE STRUCTURE zztable.
INCLUDE STRUCTURE vimtbflags.
DATA END OF l_total.
DATA: s_record TYPE zztable.
LOOP AT total INTO l_total.
IF l_total-vim_action = aendern OR
l_total-vim_action = neuer_eintrag.
MOVE-CORRESPONDING l_total TO s_record.
s_record-zz_user = sy-uname.
s_record-zz_date = sy-datum.
s_record-zz_time = sy-uzeit.
READ TABLE extract WITH KEY l_total.
IF sy-subrc EQ 0.
f_index = sy-tabix.
ELSE.
CLEAR f_index.
ENDIF.
MOVE-CORRESPONDING s_record TO l_total.
MODIFY total FROM l_total.
CHECK f_index GT 0.
MODIFY extract INDEX f_index FROM l_total.
ENDIF.
ENDLOOP.
ENDFORM. " UPDATE_USER_DATE_TIME
Here ZZTABLE is the Z table and ZZ_USER, ZZ_DATE, and ZZ_TIME are the fields that are updated. -
How to use macro to pull data from custom infotype?
Hi all,
Is rp_provide_from_last p9004 space pn-begda pn-endda. works?
i am getting all zeros .
is using macros possible pull data from custom infotype? or only select?
Regards
sas
For LDB PNPCE
get peras:Hi,
Try the following Macro it will solve out your problem,
DEFINE rp_provide_from_last.
rp_found = '0'.
clear: rp_tabix.
loop at &1.
if &2 ne space.
check &1-subty eq &2.
endif.
if &1-begda le &4 and &1-endda ge &4.
rp_found = '1'.
exit.
endif.
if &1-begda le &4 and &1-endda ge &3.
rp_tabix = sy-tabix.
endif.
endloop.
if rp_found eq '0'.
if rp_tabix ne 0 .
rp_found = '1'.
read table &1 index rp_tabix.
else.
clear: &1.
endif.
endif.
END-OF-DEFINITION.
rp_provide_from_last <p????> space <begda> <endda>.
Best Regards,
Faisal
Maybe you are looking for
-
Drop down list in ADOBE Forms - WDP for ABAP...urgent
Hi Gurus, Can you please explain me how to display values in the dropdown list of Adobe interactive form in WDP for ABAP. Also expalin me how to accept them in the program once the user selects the value from the list. The requirement is I have to ca
-
b Dynamic Document Generator (DDG) i Problem: When you deploy DDGSample.war, and try to run the samples,the following exception occurs - [javax.servlet.ServletException: com/adobe/idp/um/businesslogic/authentication/AuthenticationToken org.apache.jas
-
SSRS How to pass a value for Hidden parameter ?
Hello, I have a SSRS report deployed on the Report server. This report is having an "Hidden" parameter. Could someone please guide me, how to pass the value to this internal parameter in each of the following case - 1. Report is accessed through a D
-
Direct connect to Oracle using Delphi
How I can direct connect and transfer data from Oracle Database using Delphi. Not via ODBC driver!!!
-
Is iWork 09 going to be updated?
I've got Pages, Numbers, and Keynote 09. According to the version numbers these are the latest offerings. Are there new versions in the works?