How to Upload Qualifications of persons & Positions

Hi Friends,
I tried to upload the qualifications using BDC, but that is not working then I tried using PP01 & PP02 also for Infotype 1001 but what ever that is maintained there it is not displaying in IT24 or in profile
Pls suggest me any better way so that i can upload all the master data.
Regards
HR user

hi
instead of using pppd use pppm and upload the qualifications this is how u can assign qualifications to objects.just chesk out and revert back
regards
sb

Similar Messages

How to Upload the Contact Person to Cremas05 Idoc

Hi Guru's,
I have one question, I am a novice in SAP.
I want to upload the contact person to Cremas05 Idoc . This data is present on Debmas Idoc but not in Cremas.
Do you have an idea how we can do?
Regards,
Moh.

Hello Moh,
I'm sorry for the information but there is no ALE support for the vendor contact persons.
This feature has not been developped and there is no plan to develop it for the next releases.
The only solution I can see is a consulting project.
SAP can help for you this.
If you are interested in such activity, I would encourage you to open a customer message in SAP marketplace under component LO-MD-BP-VM and ask that the message gets forwarded to development support. You may also add my name too in order to speed up processing.
Sorry for that information
Best regards
Alain

How to assign qualifications to positions?

How to assign qualifications to the positions for the purpose of profile match up?

In PO13 there exists the possibility to assign relationships from
positions to qualifications, but therefore you have to maintain the
relationships 031 and 032 for positions with qualifications/requirements
in table T777E. So please check if you have following entries there:
S A031/A032 Q and
Q B031/B032 S
Then in PO13 when adding a new relationship, you can choose the object
type Qualifications and assign the right one to the position.

How to upload Proficiency relation with person qualification?

Hi Gurus,
I upload relations between personal object and qualification into hrp1001 with ' RH_INSERT_INFTY_1001_EXT ' and its working. But I have to upload the Proficiency from excel too. Unfortunetly I don't know where should I upload (witch table..) Can you help me?
Thanks,
Regrads,
Mark

Hi Mark,
Try using the FM 'RHPP_Q_PROFILE_WRITE'
how to update infotype 0024 in HR | SCN
Regards,
Samson.

How to upload the new position details in OM

Hi Experts,
How to upload the new position details / Org Unit details in OM .
Thanks in Advance.
Regards,
IFF

HI,
If it is huge data you can upload through LSMW or BDC. If you want to
upload a position Goto po13, click on OBJECT and click on create.
There you can create the new position and give necessary relationships.
Regards
Vijay

How to upload a logo in smartforms

can anybody tell me how to upload logo in Smartorms

Hi,
Inserting Logo in SmartForm
Follow the given steps in order to add a logo,
1) In Smart Forms Editor, In left pane, right Click any Page (say Page1) and select Create -> Window, Give it a name and Description (Say Window1)
2) Right Click on Window (Window 1) and select Create -> Graphics, Give it a name and description
3) In general Attributes, Select Name, get search help (F4) , you will find a list of pictures
4) Select any picture and set its Resolution in DPI
5) Press F9 to open Smart Forms Builder, Select window (Window1) and In Output options window set, size and position of the Logo
6) Set any other parameters if required, save and activate.
7) If there is only 1 Window in the forms, set it as Main Window in general attributes.
8) User TCode SE78 to upload new pictures and logos.
or----
u can
Try executing program RSTXLDMC program. There also you can upload a graphic.
Run RSTXLDMC
Enter file name C:\MAIL\COMPLOGO.TIF
Resolution for Tiff file
Absolute X-position
Absolute Y-position
Absolute positioning
Reserved height
Shift to right
UOM = CM
Text title
Line width for text = 132
Text name ZHEX-MACRO-COMPLOGO
Text ID ST
Text language = E
Postscript scaling
Width & Height according to PS scaling
Number of Tiff gray levels (2,4,9) 2
Then Create a new window 'COMP' with attributes;
Window COMP description Company Logo
Window type CONST
Left margin 7.00 CH window width 10.00 CH
Upper margin LN window height 8.00 LN
Finally u can make use of the text name and text id to print the logo.
Please note that if object name is not indicated as 'ZHEX...', the logo may not be printed !
Go thru this,
http://www.zebra.com/id/zebra/na/en/documentlibrary/misc/sap_smartforms_technical.File.tmp/SAPSmartFormsVersion3.pdf
Refer these threads,
How to upload logo in Smartforms.
logo insertion in smartform..
Regards,
Padmam.

How to Upload Mutilple Images in content repository?

Hi
How to Upload Mutilple Images in content repository?
I have a html which shd be displayed and it has 3 images which shd be displayed
in the same page
Here i am able to display the HTML uploaded in content repository
but the images are not displayed,since the path is not valid for the images.
Can any one hint me in this,
wating for the reply
Thanks in Adv
Regards
Suresh

Suresh, your html specifies an image at resources/images/privacy.gif - is that
image in your repository at the correct relative position to where yout html is?
Your html and repository structure must match. So if the html you posted is at
/BEA Repository/foo.html
then privacy.gif must be at /BEA Repository/resources/images/privacy.gif
James
"Suresh" <[email protected]> wrote:
>
>
>
Hi James
Here i have attached my sample html and image
My Repository Structure is as follows :
Virtual Content Repository
BEA Repository
MainImage type image
Privacy type i created
----StartDate
----EndDate
----File Upload
My HTML
<HTML>
<HEAD>
<TITLE> New Document </title>
<META NAME="Generator" CONTENT="EditPlus">
<META NAME="Author" CONTENT="">
<META NAME="Keywords" CONTENT="">
<META NAME="Description" CONTENT="">
</head>
<BODY>
<table width="100%" border="0" cellspacing="0" cellpadding="0">
<tr>
<td class="norBold"><img src="resources/images/privacy.gif"
width="123"
height="73">Privacy
Policy</td>
</tr>
<tr>
<td class="formHeadBack" height="19"><b> Privacy Policy</b></td>
</tr>
</body>
</html>
and
one image
Thanks in Adv
Suresh
"James Owen" <reply.to@newsgroup> wrote:
Suresh, how is your content structured and what does your html looklike?
If you
could post examples, that would be helpful.
thanks,
James
"suresh" <[email protected]> wrote:
Hi
How to Upload Mutilple Images in content repository?
I have a html which shd be displayed and it has 3 images which shd
be
displayed
in the same page
Here i am able to display the HTML uploaded in content repository
but the images are not displayed,since the path is not valid for the
images.
Can any one hint me in this,
wating for the reply
Thanks in Adv
Regards
Suresh

How to upload images to a Facebook page using the export module

I'm trying to set up the export module for Facebook so I can upload my images.
It works, but I want to upload them to a Page that I've created for my professional stuff not my personal account.
Anyone have any ideas?
Thanks
Program: Bridge CS6
Platform: Mac OS X 10.7.4

Did you ever get a reply to how to upload your images to FB? I am wondering how to set the "services" to export to FB.
Thank you.
KaCe

How to upload a file to database in Apex 4.2.2?

How to upload a file to database in Apex 4.2.2 in Existing Application? Also How to view the uploaded file within this application?
Any help to his question is very appreciated?
Thanks,
Prak.

980835 wrote:
Please update your forum profile with a real handle instead of "980835".
Actually we want to upload the file to our own table and retrive from it as well. Is it possible to see the file of person whom we are pulling?
This is covered in the documentation: About BLOB Support in Forms and Reports. There's also a tutorial in the Oracle Learning Library.

How can I remove a person's face from a photo and then replace the spot with a person's face from another photo?

How can I remove a person's face from a photo and then replace the spot with a person's face from another photo?

In Editor, go to the expert tab.
Open picture B, the one you wish to select the "replacement" face from to add to another picture.
Use one of the selection tools, e.g. selection brush, lasso tool, to select the face. You will see an outline ("marching ants") once the selection is complete
Go to Edit menu>copy to copy the selection to the clipboard
Open picture A, then go to Edit>paste
Use the move tool to position the face from picture B to cover the face on A
In the layers palette you should see picture A as the background layer, and face B on a separate layer

How to upload Master Catalog Schema in Catalog Content Management SRM

Hi All,
Please provide the solution as we are in real trouble.
We have to delete master catalog and upload it again. Deletion is done because the mapping and all are being corrupted. SAP has suggested to delete the catalog and again upload it and do all the mapping again related to supplier and procurement catalog.
Can all of you guide us what to do:
1. How to delete a existing Master catalog (can de-publish will do it?)?
2. We have the master catalog schema with us. Please tell how to upload this schema. Which link we have to follow?
3. After uploading the master schema how we can check that master catalog is working fine.
The answers will be rewarded with valuable points
Regards
Praveen K Ghosh

Sridhar,
I am contacting you regarding the same problem with the CCM MASTER CATALOG, as Praveen said, SAP has suggested to delete the catalog and again upload it and do all the mapping again related to supplier and procurement catalog.
I have read the documents that you refer to at http://help.sap.com/saphelp_srm50/helpdata/en/7f/9b62405c910272e10000000a155106/frameset.htm.
In this link I found information really useful, however according to the document the CCM MASTER CATALOG should be created automatically by the SAP Catalog Authoring Tool, this happends the first time that you are using the system.
Catalog Creation
You use this function to create catalogs in SAP Catalog Authoring Tool.
You can create the following types of catalogs:
Supplier catalogs
Procurement catalogs
Model service catalogs
Note
SAP Catalog Authoring Tool creates the master catalog, the SRM product catalog, SRM contract catalogs, and the contract catalog for service specifications automatically.
When SAP Catalog Authoring Tool is used for the first time, you must open the Edit Catalogs application once, before you create any catalogs. Choosing Edit Catalogs triggers the creation of the master catalog. If you do not do this, SAP Catalog Authoring Tool outputs an error message when you try to create a catalog.
We have already the Master Schema and we know how to map the CCM MASTER CATALOG to the supplier and procurement catalogs. The main problem is that we need to delete the CCM/MASTERCATALOG and created again.
1. How delete the CCM/MASTERCATALOG?
In a Test enviroment I have delete the CCM/MASTERCATALOG using the "Edit Catalogs" mode then choosing the catalog and confirm the deletion.
Once this has been done, all the catalogs has been erased including the CCM/MASTERCATALOG, so now we have the system in blank. I am not sure if this is the correct way to delete the catalog or there is an easiest way where the Procurement and supplier catalogs dont dissapear once the CCM/MASTERCATALOG is deleted.
2. Once the CCM/MASTERCATAOG is deleted how to created again?
According to the instructions the SAP Catalog Authoring Tool should created this automatically when is used for the first time, however how we can created the CCM/MASTERCATALOG again if the SAP Catalog Authoring Tool is not used for the fist time.
Is there a way where the system can create the CCM/MASTERCATALOG for a second time?
I follow the steps to create the CCM/MASTERCATALOG for the first time however i didnt get a positive result.
Any help provided will be really appreciated.
Thanks in advance
Carlos

How to upload contacts from other phone to iPhone

how to upload contacts from other smart phone which are saved on my mac to new iPhone

SFalconi wrote:
kaebfly wrote:
Not sure. Haven't checked but maybe VZW will post another "Getting Ready" guide for the 4s like they did for the 4. You can also check the App store via iTunes to see if the current app works for the iPhone 4s. I personally didn't use backup assistant...I never liked how it worked with my other devices (always mixed things up so contacts might have multiple listings instead of one and would place the mobile number as a home number and vice versa). iTunes syncing was quick and easy. I was coming from a BlackBerry when I got my iPhone though so I'm not sure if that's an option for the Voyager.
If you do some searching on the VZW site, or even Google, you can still find those getting ready guides. All the same info would apply, I'd think.
I know the info for the iPhone 4 is still available...but not sure if everything will be the same. Since iOS 5 will make it where you don't have to connect the iPhone to a computer at all there may be a way to do it without that step (which is necessary with iOS 4 if you want to use iTunes to sync contacts). You might be able to get your contacts on your computer from the Voyager and then sync them to the iPhone through the Cloud. Or...it might just be exactly the same as the current iPhone. That's why I was saying maybe they'll post another guide for the 4s. There might even be an owners manual PDF for the 4s already on the apple site. Not sure but if there is then some info would also be available there.

How can I record another person's greeting as it plays?

How can I record another person's greeting as it plays?

naomifromfl wrote:
My son posted an album on Facebook; he took the pictures with a regular camera. I shared the album and it immediately showed up on my All-in-One computer and on my Droid phone on my Facebook timeline. It has never appeared on the iPad, so all my friends with iPads are not seeing this photo album. Do yoiu have any idea why?
Thanks, Naomi
I have discovered the same problem. The timeline or group that the album is loaded directly to one can see the album and photos. However my habit has been to us my group as archive and then share the album with other groups saving me uploading several times. If I look at on my desktop I and others like you see the shared album and friends with droid FB apo also see but ones with iOS FB app do not see the shared album be it on a friend/family member timeline another group. I do not think this used to be, if almost seems that recent updates of the applicaion for iOS led to this problem but I am not certain. This is a big issue as I do not have time to upload and describe the same photos on the two to three other groups I share with. I share your frustration, and there seem to be other things I do not see maybe it is all the shared photos/albums vs ones put on a timeline or group. Not acceptable...

How do I create a persona?

I would like to create some personas but cannot seem to find where to go to get started from within firefox. I did find a separate website where you can create personas - is that where I need to go? I have graphics packages, I am not looking to edit graphics I just want to find how to upload and use the pictures I create for the persona? Thanks in advance.

I found it. Go to http://www.getpersonas.com/en-US

How to find out the person who did a transport.

How to find out the person who did a transport.
There are 3 basis admins in our Org.
so is there a way of tracing out , who did what transport.
Regards,

- Goto import Overview (STMS)
- Import Queue
- Select DEV req (goto Import History)
- Edit - Display More
It will show the user who did the transport
Rgds

How to Upload Qualifications of persons & Positions

Similar Messages

Maybe you are looking for