How to use a parameter in a report program in a dialog program
how to use a parameter in a report program in a dialog program
Hi Shaikh,
Post it in http://scn.sap.com/community/abap
"ABAP Development".
sree
Similar Messages
-
How to use a parameter of a report program in a dialog program
how to use a parameter of a report program in a dialog program.
I have to fetch the value entered in the parameter of report program and display it in a dialog programHi Aasim,
Just mention like below in your ABAP report.
PARAMETERS: p_aufnr TYPE aufnr MEMORY ID ord.
and mention the same memory ID name in the module pool screen property it automatically populates the value to and fro -
How to use dynamic parameter when a report is created using Stored Procedures
Hi all,
any one have the idea of how to use dynamic parameter in crystal report XI R2
when report is created using Stored Procedure.
Regards
shashi kant chauhanHi
You can create an SQL command in Database Expert > Expand your datasource > Add command
Then enter the SQL query that will create the list of values to supply to the user
eg select field1,field2 from table
Then edit the parameter of the report. These will be the SP parameters adn can be seen in field explorer.
Change the parameter type to Dynamic
Under the word Value click on Click here to add item
Scroll down to your Command and select one of the values that you want to appear in the list
e.g field1
Then click on the Parameters field - this is essential to create the param
You can edit other options as required
That should do it for you.
I must say that i use CR 2008 connected to Oracle 10g SP, but i reckon this will work for SQL DB and CR XI as well
Best of luck -
How to use a parameter of a report program from selection screen in a dialog program
how to use a parameter value(entered ) of a report program from a selection screen in a dialog program.
I have to fetch the value entered in the parameter of report program and display it in a dialog programHi Aasim,
Just mention like below in your ABAP report.
PARAMETERS: p_aufnr TYPE aufnr MEMORY ID ord.
and mention the same memory ID name in the module pool screen property it automatically populates the value to and fro -
How to run the parameter form example report :pform_report.jsp
how to run the parameter form example report : pform_report.jsp ?
I got these error message:
Reports Error Page
Sat Oct 18 11:58:24 CST 2003
javax.servlet.jsp.JspException: rwlib-1: REP-6106: (, 4 L, XML 1h��/�� ' PI with the name 'xml' can occur only in the beginning of the document.'.
javax.servlet.jsp.JspException: rwlib-1: REP-6106: (, 4 L, XML 1h��/��
PI with the name 'xml' can occur only in the beginning of the document.'.
at oracle.reports.jsp.ObjectsTag.doEndTag(ObjectsTag.java:180)
at examples.tools._pform__report._jspService(_pform__report.java:79)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:302)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:407)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:330)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:66)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:539)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:285)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:771)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:152)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:72)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:796)
at java.lang.Thread.run(Thread.java:484)repost !
please help! -
How to use intractive list in Alv REPORT
how to use intractive list in Alv REPORT with example.
thangs
venki.......Hi
using the USER_COMMAND we can move to the Secondary(interactive) list in the ALV
see the sample code
report yh645_secndry_alv.
type-pools: slis.
data: fieldcat type slis_t_fieldcat_alv,
fieldcat_ln like line of fieldcat,
fs_layout type slis_layout_alv,
t_layoout like standard table
of fs_layout.
data: begin of fs_spfli,
carrid type spfli-carrid,
connid type spfli-connid,
countryfr type spfli-countryfr,
cityfrom type spfli-cityfrom,
airpfrom type spfli-airpfrom,
countryto type spfli-countryto,
cityto type spfli-cityto,
airpto type spfli-airpto,
fltime type spfli-fltime,
deptime type spfli-deptime,
arrtime type spfli-arrtime,
distance type spfli-distance,
distid type spfli-distid,
fltype type spfli-fltype,
period type spfli-period,
checkbox,
color(3),
end of fs_spfli.
data:
begin of fs_table,
carrid type spfli-carrid,
connid type spfli-connid,
end of fs_table.
data: begin of fs_sflight,
check,
color(3).
include type sflight.
data:end of fs_sflight.
data:
begin of fs_table1,
carrid type sflight-carrid,
connid type sflight-connid,
fldate type sflight-fldate,
end of fs_table1.
data:
t_spfli like standard table
of fs_spfli.
data:
t_table like standard table
of fs_table.
data:
t_table1 like standard table
of fs_table1.
data:
t_sflight like standard table
of fs_sflight.
data:
t_sbook like standard table
of sbook.
data t_layout type slis_layout_alv.
select *
into corresponding fields of table t_spfli
from spfli.
perform start_list_viewer.
perform get_spfli_details.
*& Form SUB1
text
-->RT_EXTAB text
form sub1 using rt_extab type slis_t_extab.
data: flight type slis_extab.
flight-fcode = 'SFLIGHT'.
append flight to rt_extab.
set pf-status 'SFLIGHT'. " EXCLUDING RT_EXTAB.
endform. "SUB1
*& Form START_LIST_VIEWER
text
--> p1 text
<-- p2 text
form start_list_viewer .
data: pgm like sy-repid.
pgm = sy-repid.
fs_layout-box_fieldname = 'CHECKBOX'.
fs_layout-info_fieldname = 'COLOR'.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = pgm
i_callback_pf_status_set = 'SUB1'
i_callback_user_command = 'USER_COMMAND'
i_structure_name = 'SPFLI'
is_layout = fs_layout
tables
t_outtab = t_spfli
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " START_LIST_VIEWER
*******Process Call Back Events (Begin)**************************
form user_command using ucomm like sy-ucomm
selfield type slis_selfield.
case ucomm.
when 'SFLIGHT'.
selfield-refresh = 'X'.
perform get_spfli_details.
select *
from sflight
into corresponding fields of table t_sflight
for all entries in t_table
where carrid eq t_table-carrid
and connid eq t_table-connid.
perform display_sflight.
when 'SBOOK'.
selfield-refresh = 'X'.
perform get_sflight_details.
select *
from sbook
into corresponding fields of table t_sbook
for all entries in t_table1
where carrid eq t_table1-carrid
and connid eq t_table1-connid
and fldate eq t_table1-fldate.
perform display_sbook.
endcase.
endform. "USER_COMMAND
*& Form SUB2
text
-->RT_EXTAB text
form sub2 using rt_extab type slis_t_extab.
data: flight type slis_extab.
flight-fcode = 'SBOOK'.
append flight to rt_extab.
set pf-status 'SBOOK'. " EXCLUDING RT_EXTAB.
endform. "SUB2
*& Form DISPLAY_SFLIGHT
text
--> p1 text
<-- p2 text
form display_sflight .
data: pgm like sy-repid.
pgm = sy-repid.
clear t_layout.
fs_layout-box_fieldname = 'CHECK'.
fs_layout-info_fieldname = 'COLOR'.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = pgm
i_callback_pf_status_set = 'SUB2'
i_callback_user_command = 'USER_COMMAND'
i_structure_name = 'SFLIGHT'
is_layout = fs_layout
tables
t_outtab = t_sflight
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_SFLIGHT
*& Form GET_SPFLI_DETAILS
text
--> p1 text
<-- p2 text
form get_spfli_details .
loop at t_spfli into fs_spfli.
if fs_spfli-checkbox = 'X'.
fs_spfli-color = 'C51'.
fs_spfli-checkbox = '1'.
fs_table-carrid = fs_spfli-carrid.
fs_table-connid = fs_spfli-connid.
append fs_table to t_table.
modify t_spfli from fs_spfli.
endif.
endloop.
endform. " GET_SFLIGHT_DETAILS
*& Form GET_SFLIGHT_DETAILS
text
--> p1 text
<-- p2 text
form get_sflight_details .
loop at t_sflight into fs_sflight.
if fs_sflight-check = 'X'.
fs_sflight-color = 'C71'.
fs_sflight-check = '1'.
fs_table1-carrid = fs_sflight-carrid.
fs_table1-connid = fs_sflight-connid.
fs_table1-fldate = fs_sflight-fldate.
append fs_table1 to t_table1.
modify t_sflight from fs_sflight.
endif.
endloop.
endform. " GET_SFLIGHT_DETAILS
*& Form DISPLAY_SBOOK
text
--> p1 text
<-- p2 text
form display_sbook .
data: pgm like sy-repid.
pgm = sy-repid.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = pgm
i_structure_name = 'SBOOK'
tables
t_outtab = t_sbook
exceptions
program_error = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_SBOOK
Reward points for useful Answers
Regards
Anji -
How to use advanced tab in user reports?
Hi,
How to use "advanced" tab in user reports?
I have two reports. I fill "Report ID" in both and then I can push "Add Report" and fill fields property.
Then I'm can "drill" from one report to another on right click, but how to pass parameters?
Is it even possible?
Regard
LiborThank you for reply.
I can't get it working.
I have two reports:
1. report:
Name: test
SQL: select 1 NUM, 'text' TEXT from dual;
On advanced tab:
ReportID: -null-
Name: test2
Report: Test2
2. report
Name: test2
SQL: select :NUM from dual;
Now, when I run the first report and click do right click on a row and select TEST2
from popup menu, it navigates to the second report test2, but WITHOUT actual value
from NUM column from first report.
I'm using latest version of SQL Developer (1.1.1.25) and I like reports.
With this feature it would be even better.
Regards
Libor -
How to use shared parameter on request set
Hi
I have a request set with two stages
First stage contains From Date and To date where i have named the shared parameter as StartSP and EndSP
i have to use these shared parameter in one of the query in next stage where my Type is SQL Statment and i have these two date fields From date and To date in next stage as well where i am able to retirve the values from previous stage
based on these values i need to get the name in next parameter where my Type is SQL Statment
select name from tablename where '02-MAR-09' > =start_Date and '29-MAR-09' <=end_Date
I have written SQL as
select name from tablename where StartSP > =start_Date and EndSP <=end_Date but it throws an error.
I need the values of 02-Mar-09 and 29-Mar-09 from StartSP and EndSP
Appreciate if any one has idea about this.hi user;
please check:
http://download-west.oracle.com/docs/cd/A60725_05/html/comnls/us/fnd/repset04.htm
http://download-east.oracle.com/docs/cd/A60725_05/html/comnls/us/fnd/10gch609.htm
Also you can check this search:http://www.google.com.tr/search?hl=tr&source=hp&q=How+to+use+shared+parameter+on+request+set+&meta=&aq=f&oq=
Hope it helps
Regard
Helios -
Can anyone tell me how to use GUI status in ALV report.
Can anyone tell me how to use GUI status in ALV report. I want to use buttons in ALV report.
Juheb,
see the link
http://help.sap.com/saphelp_nw2004s/helpdata/en/5e/88d440e14f8431e10000000a1550b0/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVALV/BCSRVALV.pdf
Adding a button on the ALV grid using OOPs
check these sites.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/webDynproABAP-ALVControllingStandard+Buttons&
chk this.
alv-pfstatus:
http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_pfstatus.htm
then how to capture that button click.
http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_ucomm.htm
REPORT ZTESTALV.
TYPE-POOLS: SLIS.
*- Fieldcatalog
DATA: IT_FIELDCAT TYPE LVC_T_FCAT,
IT_FIELDCAT1 TYPE SLIS_T_FIELDCAT_ALV..
*- For Events
DATA:IT_EVENTS TYPE SLIS_T_EVENT.
DATA: X_FIELDCAT TYPE LVC_S_FCAT,
X_FIELDCAT1 TYPE SLIS_FIELDCAT_ALV.
DATA:X_LAYOUT TYPE LVC_S_LAYO.
"{ FOR DISABLE
DATA: LS_EDIT TYPE LVC_S_STYL,
LT_EDIT TYPE LVC_T_STYL.
"} FOR DISABLE
DATA: BEGIN OF IT_VBAP OCCURS 0,
VBELN LIKE VBAP-VBELN,
POSNR LIKE VBAP-POSNR,
HANDLE_STYLE TYPE LVC_T_STYL, "FOR DISABLE
<b> BUTTON(10),</b>
END OF IT_VBAP.
DATA: LS_OUTTAB LIKE LINE OF IT_VBAP.
SELECT VBELN
POSNR
UP TO 10 ROWS
INTO CORRESPONDING FIELDS OF TABLE IT_VBAP
FROM VBAP.
DATA:L_POS TYPE I VALUE 1.
CLEAR: L_POS.
L_POS = L_POS + 1.
<b>X_FIELDCAT-SELTEXT = 'Button'.
x_fieldcat-fieldname = 'BUTTON'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = L_POS.
X_FIELDCAT-OUTPUTLEN = '10'.
X_FIELDCAT-style = X_FIELDCAT-style bit-xor
cl_gui_alv_grid=>MC_STYLE_BUTTON bit-xor
cl_gui_alv_grid=>MC_STYLE_ENABLEd.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.</b>
L_POS = L_POS + 1.
X_FIELDCAT-SELTEXT = 'VBELN'.
X_FIELDCAT-FIELDNAME = 'VBELN'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = L_POS.
X_FIELDCAT-EDIT = 'X'.
X_FIELDCAT-OUTPUTLEN = '10'.
x_fieldcat-ref_field = 'VBELN'.
x_fieldcat-ref_table = 'VBAK'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
L_POS = L_POS + 1.
X_FIELDCAT-SELTEXT = 'POSNR'.
X_FIELDCAT-FIELDNAME = 'POSNR'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = L_POS.
X_FIELDCAT-EDIT = 'X'.
X_FIELDCAT-OUTPUTLEN = '5'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
L_POS = L_POS + 1.
"{FOR DISABLE HERE 6ROW IS DISABLED
SY-TABIX = 6.
LS_EDIT-FIELDNAME = 'VBELN'.
LS_EDIT-STYLE = CL_GUI_ALV_GRID=>MC_STYLE_DISABLED.
LS_EDIT-STYLE2 = SPACE.
LS_EDIT-STYLE3 = SPACE.
LS_EDIT-STYLE4 = SPACE.
LS_EDIT-MAXLEN = 10.
INSERT LS_EDIT INTO TABLE LT_EDIT.
*LS_EDIT-FIELDNAME = 'POSNR'.
*LS_EDIT-STYLE = CL_GUI_ALV_GRID=>MC_STYLE_DISABLED.
*LS_EDIT-STYLE2 = SPACE.
*LS_EDIT-STYLE3 = SPACE.
*LS_EDIT-STYLE4 = SPACE.
*LS_EDIT-MAXLEN = 6.
*INSERT LS_EDIT INTO TABLE LT_EDIT.
INSERT LINES OF LT_EDIT INTO TABLE LS_OUTTAB-HANDLE_STYLE.
MODIFY IT_VBAP INDEX SY-TABIX FROM LS_OUTTAB TRANSPORTING
HANDLE_STYLE .
X_LAYOUT-STYLEFNAME = 'HANDLE_STYLE'.
"} UP TO HERE
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IS_LAYOUT_LVC = X_LAYOUT
IT_FIELDCAT_LVC = IT_FIELDCAT
TABLES
T_OUTTAB = IT_VBAP[]
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Don't forget to reward if useful.... -
How to use views in sql script report?
All all
Can any one tell how to use views in sql script report?Most of the views are based on tables (or other views which are based on tables).
The view typically shows one org at a time based on the context that is set.
If you need records for all orgs, you need to use the underlying tables. Oracle typically names the tables with a _all suffix.
e.g. PO_HEADERS will show records for one org at a time. PO_HEADERS_ALL will show records for all orgs.
Hope this answers your question,
Sandeep Gandhi -
How to use lexical parameter in report
i want to use lexical parameter in report and pass parameter from form how it is possible in detail
A.RHi,
typically you fill your lexical paramter in the after-paramform-trigger out of the values of your bind-parameters (giving end users directly control over lexical parameters might not be a good idea). Inside PL/SQL a lexical parameter is referenced like bind parameters with ":". In the query it's referenced via "&" and represents a part of the query.
A simple example.
- p_deptno as bind parameter
- p_where as lexical paramter
- end user choose value for p_deptno (10,20,... or nothing)
- Trigger: if :p_deptno is not null then
:p_where := 'WHERE deptno = :p_deptno'
else
:p_where := null;
end if;
- Query select ... from emp &p_where
Regards
Rainer -
How to use format-date with the report parameter
Hi all,
How to use the format-date function with this tag,
<?param@begin:P_FROM_DATE?><?$P_FROM_DATE?>
this form date is coming from report parameter and is coming like this 2012/11/01 00:00:00.
So now i need this in DD-MON-YYYY fromat.I tried like this <?param@begin:P_FROM_DATE?><?$format-date:P_FROM_DATE;'DD-MON-YYYY'?>
but its giving error. Can any one pls tell how to convert it to customized date format.
thanks & Regards
Srikkanth.MIssue solved.
Ref this link
XML date Format -
How to use a parameter field value as a substring in a "like" statement?
Hi all,
I'm trying to use a parameter field in a Record selection formula where the parameter field value would be a substring of the data stored in the field.
My parameter field (SlctResearcher) is constructed as follows:
Type: string
List of Values: static
Value Field: (Reports) RptAuthors
(in Value Options) Allow custom values?: True
{Reports.PubDate} in DateTime (2009, 04, 01, 00, 00, 00) to DateTime (2010, 03, 31, 23, 59, 59) and
{Reports.RptAuthors} like "*{?SlctResearcher}*"
When I hit F5 to generate the data, I get no results (and the parameter prompt field does not even come up...)
If I modify the formula to put a hard-coded string, like
"*Jones*"
after the 'like', I get results (all the reports where "Jones" is a substring in the RptAuthors string.) If I modify the formula to just use the parameter field without the quotes/stars like:
{Reports.PubDate} in DateTime (2009, 04, 01, 00, 00, 00) to DateTime (2010, 03, 31, 23, 59, 59) and
{Reports.RptAuthors} like {?SlctResearcher}
I do get the parameter prompt field, but still no results even if I put in a valid substring value (since it is not searching for a substring anymore...)
How can I do this?
Thanks,
Will1st thing... Make a copy of your report before doing anything!!!
To use a SQL Command, you'll want to open the Database Expert and look at the Current Connections. Expand the data source and the 1st option you see is the Add Command option.
To find the SQL That CR is currently using, choose Database from the menu bar and select Show SQL Query...
You can copy this and paste it directly into the command window. (If you you can write your own SQL you don't need copy CR's, it's just an option.)
You'll also want to take not of any parameters that you have, you'll need to add them the the Parameter List of the command as well... be sure to spell them EXACTLY as they are in the design pane.
Anyway, once the SQL statement is in the Command window you'll be able to alter the WHERE clause to use the wild cards.
For future reference... What type of database are you reporting against???
Jason -
How to show unhidden parameter in linked report in report manager in ssrs ?
Hi,
in my ssrs report1 i have added a image,if i click on that image it will redirect to report2 and it will take parameters from report1 automatically and all parameters are in report2 are hidden because it will consider report1 parameters,but here my requirement
is
in report2 i have total six parameters and all are hidden,i want to show the one of the hidden parameter(LOB) in report,so, i was set visibility property to visible, now i am able to see that one parameter(LOB).
but after deploying the report in report manager,when i click on the image it is not showing the parameter(LOB)
Do i need to change anything in image properties?please let me know
Please help me with this issue how to show the that one particular parameter(LOB) in report manager which is unhidden?, it is an urgent requirement.
here we are building reports on cube.
Please let me know if you need more information.
Thanks in advance,
NaveenHi Naveen,
As per my understanding, since the purpose of a drill-through report is to pass the parameters from main report to the details report, we wouldn't want users to see or modify the parameters in the details report. Therefore, by default, the parameter pane
is automatically hidden in the details report.
In this scenario, we can try to use “Go to URL” instead “Go to report” option to work around this issue. If the parameters are multi-value parameters, we can use the expression to like below:
="javascript:void(window.open('http://server_name/reportserver?/Report_folder/Report_name&A=" &Join(Parameters!B.Value,"&A=") & "','_blank'))"
If the three parameters are single-value parameters, we can use the expression to like below: ="javascript:void(window.open('http://server_name/reportserver?/Report_folder/Report_name&A=" & Parameters!B.Value & "','_blank'))"
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
When/How to use - "search" parameter type in parameter like other types.
We recently upgraded BI Publisher to 10.1.3.4. I saw new parameter type "search" in parameter section, when creating report. whats the use of it? How to use it ? like other parameter type Text, Menu,Hidden, Date.
I couldn't find any help or release notes on this !
Thanks
AyapsI started looking into this parameter type when our drop-down for customer numbers went from 13,000 (manageable) to 45,000 (completely unmanageable).
I imagine this is supposed to mimic the effects of a "Long List" type LOV in Oracle Applications (as I had inquired about in [this thread|http://forums.oracle.com/forums/thread.jspa?threadID=895521&stqc=true|Large List of Values (LoV) hangs. Is there an equivalent for a long list?]), but performance-wise, "Search" does not seem to be any more efficient that using the "Menu" type LOV. Even with the help of having a partial string with a wildcard to match, the "Search" still takes too long to pull up to be of any use to us.
Maybe you are looking for
-
Good morning a few weeks ago I send the request for the replacement program of my ipod nano 1st generation and they sent me the shipping box but I did not get the label to go back, and I can not return it , i need to you sent me again the box for
-
How can I inclue a PDF page in a PDF arquive with many pages?
I have a PDF arquive with 107 pages and I want to inclue a new page to replace the page number 3. How can I do this?
-
Moving a Solaris Zone from one server to another
Hello, I have a Solaris 8 zone running on a server. It is running on a ZFS file system. The hardware that it is running on is no longer under support contract, so we want to move it to our newer solaris hardware that still has support. I have done a
-
Photoshop CS5 Bugs on MacBook Air Fixed in Mountain Lion
Hey all, I was pretty frustrated last November when I bought a new Macbook Air and experienced weird behavior in Photoshop CS5. Brushes would stop working. Tool icons would freak out. This was discussed at length on the boards, and Chris from Adobe s
-
Can't import D600 files to Organizer
Elements 11 and Camera RAW 7.3 update loaded. Still can't import Nikon D600 files. What now? Operating system is Windows 7 and I have just upgraded from Elements 9.