How to use airport time capsule with multiple computers?

I'm sure there are some thread about this but i couldn't find it... so sorry for that but hear me out! =)
I bought the AirPort Time Capsule to back up my MBP
And so i did.
then i thought "let give this one a fresh start" so i erased all of it with the disk utility and re-installed the MBP from the recovery disk.
I dont want all of the stuff i backed up just a few files and some pictures so i brought that back.. so far so good.
Now i want to do a new back up of my MBP so i open time machine settings, pick the drive on the time capsule and then "Choose" i wait for the beck up to begin, and then it fails. It says (sorry for my bad english, im swedish haha) "the mount /Volume/Data-1/StiflersMBP.sparsebundle is already in use for back up.
this is what i want:
i want the "StiflersMBP.sparsebundle" to just be so i can get some stuf when i need them. it's never to be erased.
i want to make a new back up of my MBP as if it's a second computer...
so guys and girls, what is the easiest and best solution?
Best regards!

TM does not work like that.
If you want files to use later.. do not use TM.
Or do not use TM to the same location. Plug a USB drive into the computer and use that as the target for the permanent backup.
Read some details of how TM works so you understand what it will do.
http://pondini.org/TM/Works.html
Use a clone or different software for a permanent backup.
http://pondini.org/TM/Clones.html
How to use TC
http://pondini.org/TM/Time_Capsule.html
This is helpful.. particularly Q3.
Why you don't want to use TM.
Q20 here. http://pondini.org/TM/FAQ.html

Similar Messages

How to use airport time capsule on a dell portable pc with windows 7 taking in consideration that Time machine doesn't run with Windows ?

how to use airport time capsule on a dell portable pc with windows 7 taking in consideration that time machine doesn't run with Windows ?

TM does not work like that.
If you want files to use later.. do not use TM.
Or do not use TM to the same location. Plug a USB drive into the computer and use that as the target for the permanent backup.
Read some details of how TM works so you understand what it will do.
http://pondini.org/TM/Works.html
Use a clone or different software for a permanent backup.
http://pondini.org/TM/Clones.html
How to use TC
http://pondini.org/TM/Time_Capsule.html
This is helpful.. particularly Q3.
Why you don't want to use TM.
Q20 here. http://pondini.org/TM/FAQ.html

I have used Airport Time Capsule with my iMac for several years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both?

I have used Airport Time Capsule with my iMac for a couple years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both the iMac and MacBook Air? I don't mind losing earlier backups. I have excluded some items from backing up, but since the Airport Time Capsule is full, I can't even begin to back up the MacBook Air.

On your Mac.......
Open Finder > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the smaller window that appears
Click on the Disks tab at the top of the window
Click Erase Disk
On the next window that appears, select the Quick Erase option, then click Erase
The operation will only take a few minutes.
Now you are ready to start new backups of both Macs. Back up one Mac first, then back up the other. Do not try to back up both Macs as the same time.

Can I use airport time capsule with a hotspot network?

Can I use airport time capsule with a hotspot network?

Can I use airport time capsule with a hotspot network?
Very very poorly..
It can join a wireless network..
See instructions here.
https://discussions.apple.com/thread/5719954?tstart=0
End result is super slow wireless connection to the TC and all packets pass through the hotspot so expect internet to drop to nothing while you are backing up.

Using Airport Time Capsule with an external usb hard drive - how to connect

I have 2TB Airport Time capsule which is connected to my iMac by an ethernet cable and which I use for T.Machine backups - No problems here.
I have an old MacBook Pro running 10.6.8 and which is also connected to my T/C via wi-fi - again no problems.
But I understand I can use an external hard drive via usb cable connected via a powered hub, to the T/Capsule and which I wish to do certain backups from my MBP (I have no wish to update the MBP as it runs certain apps no longer available on the iMac (10.9.2)
Now the problem I have is trying to set it up, the MBP has Airport Utility 5.6.1 and I can’t continue as it says I need a newer version. As I see it, the newer version doesn’t work on the MBP only the iMac.
A catch 22 situation. If I continue and and go to “manual setup” then try update, all I get is “correct the problem before updating” (Allow setup over the internet using Bonjour).
Anyone have any ideas or images that I can view to try and get things going?
I should add that I wish to use my external hard drive not as a time machine backup but only for certain items using say, Super Duper, but am unable to get the disk to mount on the MBP
Alan

I still can't use it the way I was hoping because it then becomes a T/M back-up disk and not a normal usb/firewire disc.
You are first mounting the drive on the desktop, correct?
Not sure what you mean here.
You can drag/drop files normally or copy/paste files to the drive icon on the desktop, just as you would a normal drive that is displayed on the desktop.
Or, double click the drive icon on the desktop and drag/drop files into the open window there.
Tell us the steps that you are using to mount the drive on the desktop. What happens after each step?

How to configure Airport Time Capsule with IP Camera?

I have recently switched from a DLINK Router (DIR-655) to the latest 3TB Airport Time Capsule. The ATC works great, super fast etc...
However...
I had an IP Camera (Trendnet TV-IP572-WI) connected to my DLINK Router, using a Dynamic DNS account (dyndns) to access if from outside my home (i.e. from the Internet). The configuration on the DLINK was quite straightforward. (Virtual Server)
Question: How to do the same with Airport Time Capsule ? I had a look at the detailed settings menu in the Airport Configuration Utility. but cannot find anything like this (Virtual Server, Port Forwarding etc...)
Many thanks for your help !

What is the make and model number of your "modem"?
Most modems these days are actually modem/routers or gateway devices....which would require that the port forwarding be done on the "modem"....not on the Time Capsule.
If you did not see any settings for DHCP Reservations and Port Settings when you looked around in AirPort Utility, this indicates that the Time Capsule is likely configured to operate in Bridge Mode.......and it is your "modem" that is actually the router for the network.
Open up AirPort Utility again, click on the Time Capsule icon, then click Edit in the smaller window that appears
Click the Network tab at the top of the window
Check the setting for Router Mode.......which is likely set to "Off (Bridge Mode)"
Is it?

How to use Airport Time Capsule as a wireless hard drive?

I have purchased the Airport Time Capsule 3TB but I really don't need a backup disk, so I want to use it as a wireless hard disk to be used in my network, how can I do this? Can someone give me a clear step by step guide of how I can do this?
I appreciate your help and support.

There is no difference between using the TC as a backup or as a network disk.
Mount the disk in finder.
Copy files to it and from it.. in exactly the same way you copy files between disks in a Mac.
As a file store the TC is not good.
Store files on the TC.
https://discussions.apple.com/message/24380694#24380694
This is asked several times a day.. obviously people are struggling with their latest SSD being too small.
The TC is not suitable for network file server.. but many people having no choice press it into service as such.
It cannot be partitioned. It was and is and ever shall be a backup device for Time Machine.
Major issues.
1. No backup.. no way Time Machine can backup a network drive. No place to backup to.. So all your files will be at risk. And you will need to buy a third party like CCC to do backup.
2. The TC cannot be partitioned and mixing TM backups and data is not great.
3. The drive is slow to spin up and quick to spin down.. there is no controls.
4. iPhoto in particular can easily corrupt its entire library with wireless networking causing a disconnection to one photo. Even if you do this;;; do not move your photo library... you have been warned!!
5. iTunes will constantly lose connection to the library. The disk is too slow to respond.. itunes on the computer will constantly spit out errors. Even in the midst of streaming the TC can spin down the disk due to caching.
6. Do not use any live files on the TC no matter what else you do.. if you edit files in whatever program the file must be on the local hard disk.
7. The only suitable location for most libraries is a computer. You can plug in an external hard disk.
Read pondini for some work arounds.
Q3 here. http://pondini.org/TM/Time_Capsule.html

Using Airport Time Capsule with CenturyLink C1000Z

I just received an Apple Airport Time Capsule (3Tb) for Christmas and want to use it as our home wi-fi. Up until now, we have been using the wi-fi which is supplied by our DSL carrier (CenturyLink) through the C1000Z router/dsl modem combo they supplied when we started service with them.
Here's how I have it set up:
1) Wall to CenturyLink C1000Z
2) CenturyLink C1000Z to Apple Airport Time Capsule 3Tb
3) Apple Airport Time Capsule 3Tb to iMac (direct Ethernet connection)
I plugged everything in as described above and everything "seems" to be working. My question is:
Do I need to configure anything special in either the Airport TimeCapsule or the CenturyLink C1000Z to make this setup work better?
When I go into the Airport Utility and select "Network" the Router Mode shows "Off (Bridge Mode)", with Network Options showing "Block incoming IPv6 connections" and "Allow incoming IPSec authentication" checked by default. The internet tab shows connection using DHCP, with Internet Options configuring IPv6 automatically using IPv6 Native mode, with "Enable IPv6 Connection Sharing" checked.
I've read in some sites that I need to configure the CenturyLink C1000Z in a special way, or my internet speeds will be negatively affected by this setup. Can someone please assist? CenturyLink tech support was of absolutely no assistance in this area, even unwilling to try. Thanks for your help--I look forward to the education!

There is nothing wrong with the setup. ADSL is never that fast.. Do the speed tests and see. Plug straight into the modem and do a speedtest.. then plug into the TC and do the test..
Is the Mac not getting full speed?
What makes you think your losing something?
No ISP can help with home network.. I can understand their reluctance to get involved.. that is the case anywhere and everywhere. Home networking can go from simple to complex in the extreme very quickly.
The most important part of this setup to your original specs is not mentioned.
I just received an Apple Airport Time Capsule (3Tb) for Christmas and want to use it as our home wi-fi.
To use it as your home wifi, it is essential that you create a wireless network in the TC.. there is no need to turn off the wifi in the Century modem router although doing so is probably a good idea if the two are sitting right next to each other.
Otherwise tell us what issues you are having.

How to use my Time Capsule with my Router?

My Time Warner Cable HS connection uses a specific modem, the Motorola Surfband SBG6580.
I was currently using my Tiem Capsule as my router and just a Cable Modem from Time warner, but this particular service uses this wireless router. I need to get my Apple Time Capsule back into my netowrk.
I would either like to understand how to use the Motorola as a switch or just as a modem so I can use the Time Capsule as my router or vica versa, use my Time Capsule as just a back up drive and leave the Motorola as my rwireless router. The onyly thing about this second configuration is that I need to connect to the Time Capsule wirelessly with one of my computers for back up, the other two are both on an ethernet port hard wired.
So this is what I have to put in place:
Motorola Wireless Cable Modem
Time Capsule
5 Port EasyNet Switch
iMac Desktop (Ethernet hardwired)
Macbook (Ethernet hardwired)
MacBook (wirelessly connected to the network)
Any thoughts great appreciated.
Henry

It's likely that your ISP will require that the Cable Modem is the first device in the chain. You do need to set the Time Capsule to Bridge mode, disabling the DHCP. Now, the Cable Modem is providing DHCP to devices that connect to it, and devices that connect to the Time Capsule.
You will be able to wirelessly connect to the Time Capsule and network.
Here is a simple article explaining:
http://www.ehow.com/how5309467bridge-time-capsule-mac-pc.html

How to use AirPort Time Capsule 2TB as an external storage hard drive only?

I have a new AirPort Time Capsule 3TB, now I want to use my AirPort Time Capsule 2TB as an external storage hard drive only, how do I it?
I would like to connect the AirPort Time Capsule 2TB directly to my Mac Pro. using OS X 10.7.5.
I have erase disk and reset the 2TB to factory default, after that, I cannot make it to connect to my Mac. Please help.

The 2TB Time Capsule needs to connect to your 3TB Time Capsule using a wired Ethernet connection.
Connect from a LAN <--> port on the 3 TB Time Capsule to the WAN "O" port on the 2 TB Time Capsule and configure the 2TB Time Capsule in Bridge Mode and turn off the wireless function on the device as well.
Once that is done, you can connect your Mac directly to the 2TB Time Capsule using another Ethernet cable, or your Mac can connect to the network using the normal wireless network, if you prefer.

How to setup AirPort Time Capsule with static IP?

Untill few days ago I have been using Airport Extreme as router for my network. It was cabled to the modem from my internet-provider.
I had 2 printers, 1 iMac, 1 MB-Pro, several SONOS-devices, iPhone, Loewe-TV and iPad setup for it.
AND IT HAS BEEN WORKING GREAT FOR MORE THAN 4 years
Then I bought my new Time Capsule:
It is connected in the same way as the Extreme but now via a static IPadress.
The Airport-Utility says that I am using these set-ups:
Internet - connection "DHCP"
Network - "DCHP+NAT"
The STATUS is:
"DOBB. NAT"-message at the Airport-utility.
Internet-connection is VERY-good and with high-speed.
I am NOT able to get connection to the TV - it shows 100% connection but will NOT allow me to connect to it (password IS correct:-)
It is only possible to get connected to the one SONOS Play:5 which is connected to the Internet - all the other devices can only be connected when I change the network-setting in AirportUtility from "DCHP+NAT" to "OFF (bridge)".
I have been told that when I am using a static IP-adress for my Airport then "DCHP+NAT" is the right setting in order to make the Airport set-up dynamic-adresses for the wireless connected devices.
I am not very-clever in this - but an old man who wants to get the right advice from a clever-person in order to find a solution.
ANYONE inhere who wants to help me?
THANK YOU in advance,

Sailalong wrote:
Untill few days ago I have been using Airport Extreme as router for my network. It was cabled to the modem from my internet-provider.
I had 2 printers, 1 iMac, 1 MB-Pro, several SONOS-devices, iPhone, Loewe-TV and iPad setup for it.
AND IT HAS BEEN WORKING GREAT FOR MORE THAN 4 years
Then I bought my new Time Capsule:
It is connected in the same way as the Extreme but now via a static IPadress.
The Airport-Utility says that I am using these set-ups:
Internet - connection "DHCP"
Network - "DCHP+NAT"
I am unclear as to what has a static IP address. And why did you change the setup.. Would it not have worked in exactly the same way as the Extreme?
Is the static address in the WAN setup or the LAN side setup?
Lan side it should be fine.. WAN side is not fine. There are strict rules to apply to using static IP on WAN.
If you can fill that in, it will help me understand the rest.
Also have you updated the firmware in the TC yet? As soon as you have a WAN connection please do a firmware update as there are major issues with SONOS.. which requires Spanning Tree Protocol to work. Apple bungled that one in the first firmware of the TC.. so you must have 7.7.2 and I am not sure it is fully repaired even in that.
I hope you did not reset your AE yet.. sometimes it is better to stick with what works and use the TC in bridge to it.

How to use the time capsule with my existing router?

Here is my situation. I have Alltel PCD UM185 USB modem for their mobile broadband internet. I have a Cradlepoint MBR1000 router which I plug the usb modem into to share the internet through a wireless network which has WPA security on it. I want to use my 1TB time capsule to backup the computers in my house wirelessly and not as a router. What connection do I need to make and how to do I setup the time capsule this way? I can't figure it out. Thanks for any help in advance. If you need more information just ask.
Thanks,
John

Steven's solution will work just fine if you want to connect the Time Capsule using ethernet.
You might also consider configuring the the Time Capsule to "Join" the wireless network. In this type of configuration, backups would occur only over wireless and you could locate the Time Capsule virtually anywhere it can receive a good, strong wireless connection. Important Note...the ethernet ports on the Time Capsule are not enabled in this type of configuration, so you will not be able to connect using ethernet.
Open AirPort Utility and click Continue
Then select the option to "Join a wireless network" and follow the prompts

How to use my time capsule with windows vista

i have a 2tb time capsule iphone 3gs appple tv and a ipad 2 the wife and kids have iphone 3gs and 4 and id like to set up a home network for us all to use and share music and photos is this possible

Sorry the title never gets into detail at any point.. no vista computer is listed.
Access the vista computer to TC turn on the guest network and allow full read write access. Make sure you have the workgroup set correctly. There are issues sometimes on the windows side but try that.
As for using the TC as a file store.. well it isn't a good idea. It is a backup device.. which has no ability to back up itself. There is no mirrored disks and one day it will die and you can say bye bye to your precious photos and music. You can work your way around the issue.. sure.. in the end you will need an alternative backup on a computer.. that alternative backup will then be backed up to where??
If you must run your itunes and iphoto library on the TC just read about how to set up the libraries in network location. Google will find the posts.
http://gigaom.com/apple/using-time-capsule-as-a-media-drive/
You perhaps should read all the other posts about why not.. as well as how to.

How to use a time capsule with dsl

How do you hook up a time capsule if you have dsl Internet connection?

Connect an Ethernet cable from the DSL modem to the WAN "O" port on the Time Capsule, just as the Setup Guide illustrates.
Time Capsule 802.11n (4th Generation) - Setup Guide

Can I use a Time Capsule for multiple computers?

Hello,
after reading various posts on this forum I am now more more confused than ever : bear in mind that my understanding of computing stuff is quite ... limited, so I apologize if this question seems senseless.
I have several small capacity external hard drives which I uses for back ups and moving files between my computers (1 desktop (2.16 GHw Intel Core 2 Duo: Mac OSX 10.6.5), 2 laptops) but the result is a ton of confusion and multiple files everywhere. I was therefore thinking of getting a Time Capsule 2T which I would use as :
- a unique external back up machine for all my computers (without adding any other external drives)
- a wifi modem-router
Before investing that much money, can anyone tell me if the Time Capsule is indeed appropriate for the above uses, particularly being able to program all 3 machines to wirelessly back themselves up on the scheduled basis.
When I started seeing questions about adding USB driven external hardrives It made me wonder if i had gotten the purpose of the TC all wrong.
Thank you for your patience!:=)

nicaru wrote:
- a unique external back up machine for all my computers (without adding any other external drives)
- a wifi modem-router
Yes, that's exactly what it was designed for.
You can put other data on a Time Capsule, besides backups, but that will cause some conflicts, sooner or later. See #Q3 in [Using Time Machine with a Time Capsule|http://web.me.com/pondini/TimeMachine/TimeCapsule.html] (or use the link in *User Tips* at the top of this forum).
When I started seeing questions about adding USB driven external hardrives It made me wonder if i had gotten the purpose of the TC all wrong.
You can do that as well.
One purpose is, if the TC isn't large enough to back up all your Macs, you can back some up to the TC's internal HD, others to the USB drive. It varies widely depending on how you use your Mac, but a "rule of thumb" is, TM needs 2-3 times the space of the data it's backing-up, to be able to keep a reasonable "depth" of old backups for you.
Another is, if you want other data available over the network, you can put it on the USB drive to avoid the hassles in #Q3. And, since you can partition the USB drive (unlike the internal), you could use one partition for backups, another for other data.
|
There is an alternative, however, that you might find more attractive (and less expensive), since you do have a desktop Mac, and I assume you already have a wireless router.
That's to connect one or more external HDs directly to the desktop Mac, and back it up directly to that drive (or a dedicated partition on it).
Then back up the laptops over your network to a different partition on the same drive, or a different drive, via sharing. See #22 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).
For moving files around, you could continue to use a small external HD, or use sharing over your network.

How to use airport time capsule with multiple computers?

Similar Messages

Maybe you are looking for