How to use BAPI to add a new version for a claim number in WTY transaction.

How to use BAPI to add a new version for a claim number in WTY transaction.
I am using  function module " BAPI_WARRANTYCLAIM_ADD_VERSION ".
It needs to copy all contents of previous version to a new version.
While doing so i am unable to copy fields like valic valoc etc. Any ways by which  i can copy this values.
WTY will update PNWTYH , PNWTYV and PVWTY tables.
Thanking you,
Lokesh.

Hi Vishnu,
You can do that through EEWB. Please go through SAP Note 484597. You would get the details of using Easy Enhancement Work bench.
Rewards point if you think this info is useful
Regards,
Dipender Singh

Similar Messages

  • How to use old rms to the new version.

    Hai i am using a application with rms.
    Now i have updated the gui of the application. I want to install it in the phone. It is erasing my old data.
    How can i use the same rms for this version .
    Did anyone knows about it.
    Thanks in advance for the help provided
    raj

    See the second and third entries from the bottom of the table of recovery tools in Recover your iTunes library from your iPod or iOS device.
    tt2

  • Do I have to add a new contact for each new phone number?

    I just got my phone and I'm adding in my contact manually. I don't see multiple spots for multiple phone numbers for one person? Do I have add a new contact for each phone number a person has? (I.e. One for their home number, one for their work number, one for their cell number).
    Thanks!

    No.
    There is no reason to have a default number of phone number entries that may not all be used and the same for email addresses.
    When manually entering contact info, after entering the first number for a contact, a new phone number entry is made available directly below.

  • How can I add a new entry for determining a requirement type

    Dear Friends,
    How can I add a new entry for determining a requirement type
    via Item Category + MRP type,  I see no new entries selection.
    This is in  Avb Check & TOR-> TOR-> Determination of req type using transaction.
    Please help.
    Regards
    Ravi.

    Availability Check and Transfer of Requirements > Transfer of Requirements > Define Requirements Types ?
    Just one node above?
    Never mind, you need to add entry on item category:S

  • How to Use Home+End Key on new short usb apple keyboard on XP

    How to Use Home+End Key on new short usb apple keyboard on XP
    now i use macbook and new short apple keyboard.
    it hasn't Home and End key. i try to use Fn + -> , Fn + <-
    it cann't do that. How can i set the Fn + <- be Home key
    and Fn + -> be End key like on my macbook keyboard
    thank you for answer

    Easy, no need to be harsh. I might not be a Level 9  Discussions user, but I’ve been an Apple Technician for more than a decade now. So believe me, I know what I’m talking about. Be it OS X Server or emptying the Trash. But even I come here from time to time to learn from others. Well, back to topic and being a little more specific:
    The 'My Info' setting always belongs to the first iCloud account you add to an iOS device. In this account you create at least 1 contact, the one you will be using for 'My Info'. You then do the same on your other iOS device using NOT the same iCloud account, of course. You only need to enable contacts syncing in iCloud preferences for these primary accounts. From here on you can use differing 'My Info' on your 2 iOS devices without a problem.
    But you may know that you can use more than one iCloud account at a time. Only the primary one will offer all iCloud options like Photostream. But what they all offer is contacts, calendars, etc. So if you intend (and I did) to share these 2 between your devices you can add them using a second iCloud account to both of your iOS devices. This makes it 3 accounts all in all. You could even go further and add another one just for 'Find my iPhone' if you like.
    I would’ve used the built-in sharing of Calendar.app instead, but Contacts.app does not (yet) offer sharing contacts with others. That’s why I went with the third iCloud account as a secondary account to both iOS devices.
    Apple of course recommends using just one Apple ID for everything to make it easier. But in some scenarios this just won’t cut it, which is even described in one of their support documents.
    I hope that now you have an idea what I’ve done…
    Good night
    Björn
    PS: It would be nice if people did not insist on being right. They too can sometimes learn something!

  • Hi All ,How to add a new  field for MEDRUCK if we havea ZMEDRUCK

    Hi All ,
            How to add a new  field for MEDRUCK if we have a ZMEDRUCK
    Req: If I want to add a new field for the following text editor line :
    IN MAIN WINDOW > TEXT EDITOR> SERCH FOR TOTAL_AMOUNT-->
    In that we will have
    &ekko-waers&    &komkfkwrt&
    (currency)       (numerics)
    Pls send the Code to make these changes .Pls its urgent
    Thanks&Regards.
    Bharat.

    Hi
    If that field which you wants to add is available in one of the structures like EKKO,EKPO then you can add that field just beside the other fields
    If that field is not there in the any of the structures then you can define a variable using define command
    /: DEFINE  &VAR&
    / &VAR&  = <some value>
    or you can write subroutines to fetch the data from outside tables and can use those fields data in the script
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • How to use the "identify" feature in new 6.3.1 airport utility?

    how to use the "identify" feature in new 6.3.1 airport utility?
    so you can find the basestations in larger networks?

    There is a workaround, which is to use Airport Utility 5.6.
    I can confirm that 5.6 will run on 10.8.4 Mountain Lion, it will recognize the new 2013 Airport Extreme Base Station (A1521) running firmware 7.7.1, and it will give you access to view the device's Log & Statistics, DHCP Clients, and Profiles.
    Four caveats:
    1) The easiest way to install it is to download the app itself, not an installer or through the App Store. There is a page here where you can download the app: http://coreyjmahler.com/2013/03/08/airport-utility-5-6-on-os-x-v10-8-mountain-li on/ This way, you still have both versions, Airport Utility 6.x.x and 5.6.
    2) When you launch 5.6, you'll get a message saying a newer version is available and asking if you want to update. Click Cancel to proceed into the utility.
    3) When you click the Manual Setup button in 5.6, you'll get a warning dialog that "This version of AirPort Utility doesn't support this AirPort wireless device and might improperly configure the device if you continue to use it. Check www.apple.com/support/airport for the latest version of AirPort Utility." You can click Continue to get into the utility without issue.
    4) You should probably only use 5.6 to view the additional status details. I have not tried to modify and save any AEBS settings using 5.6. There are other discussions here in the forums indicating that attempting to save settings via 5.6 that are no longer available in 6.3.1 will not actually save the settings to the AEBS even if both utilities indicate that the settings are changed. See https://discussions.apple.com/message/22677993#22677993
    So, even though you can't use it to modify settings no longer available in Airport Utility 6.3.1, using Airport Utility 5.6 to view DHCP clients, Logs and Statistics is very useful for troubleshooting network issues.
    PS - There are two ways to get to the DHCP Clients list, neither of which is obvious The first is to go to the Airport pane -> Summary tab and click on the "Wireless Clients:" label in the Summary display. All of the labels from "Wireless Mode:" down on the Summary display operate as links to view/edit the corresponding info/settings, which is also not obvious at first glance. Also not obvious, clicking on "Wireless Clients:" actually brings up a new pane with three tabs: Logs, Wireless Clients, and DHCP Clients. You can also get to the same pane by going to the Advanced pane and clicking on the Logs and Statistics button.
    I hope this is helpful information. Took me a while to find out how to do this.

  • How to use my itunes with a new pc

    how to use my itunes with a new pc?

    These are two possible approaches that will normally work to move an existing library to a new computer.
    Method 1
    Backup the library with this User Tip.
    Deauthorize the old computer if you no longer want to access protected content on it.
    Restore the backup to your new computer using the same tool used to back it up.
    Keep your backup up-to-date in future.
    Method 2
    Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
    Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
    I'd recommend method 1 since it establishes an ongoing backup for your library.
    If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
    If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
    Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data. If you don't have any Apple devices then see HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store.
    tt2

  • How to add a new tab for the project?

    Dear All Experts,
        Could you tell me how to add a new tab for the project?
        Pls refer to the screenshot as below:
    Thanks!
    Xinling Zhang

    Hi,
        The new tab in cj20n , and the new tab can only be displayed in the highed level.Pls refer to below
        And in cj02, there is no this tab also in the wbs detailed screen,
    Thanks!
    Xinling

  • How to use *MonitorManager* to add custom messages in channel monitoring?

    Hi experts,
    How to use MonitorManager to add custom messages in channel monitoring for custom adapter development(Not in audit log).
    like
    Type   Time Stamp   Message ID   Explanation 
      6/25/11 6:39:47 AM 00199942-6e43-02df-96ca-8b538c63dd98 Message processing completed successfully
      6/25/11 6:39:47 AM 00199942-6e43-02df-96ca-8b538c63dd98 Message with ID 00199942-6e43-02df-96ca-8b538c63dd98 processed
      6/25/11 6:39:46 AM 00199942-6e43-02df-96ca-8b538c63dd98 Message processing started
      6/24/11 6:43:26 AM 00199942-6e43-02ef-96b1-7650f3495e03 Message processing completed successfully
      6/24/11 6:43:26 AM 00199942-6e43-02ef-96b1-7650f3495e03 Message with ID 00199942-6e43-02ef-96b1-7650f3495e03 processed
      6/24/11 6:43:24 AM 00199942-6e43-02ef-96b1-7650f3495e03 Message processing started
      6/23/11 6:45:52 AM 00199942-6e43-02df-9698-5be345a9ddf5 Message processing completed successfully
      6/23/11 6:45:52 AM 00199942-6e43-02df-9698-5be345a9ddf5 Message with ID 00199942-6e43-02df-9698-5be345a9ddf5 processed
      6/23/11 6:45:50 AM 00199942-6e43-02df-9698-5be345a9ddf5 Message processing started
      6/22/11 6:43:30 AM 00199942-6e43-02ef-95ff-2c03493dc078 Message processing completed successfully
    Edited by: SAP_PI_D on Jun 28, 2011 12:10 PM

    Solve by myself

  • I was told I need to remove the enterprise server account I have and need to add a new one for work but the IT person did not tell me how to do this.  Can anyone help?

    I was told I need to remove the enterprise server account I have and need to add a new one for work but the IT person did not tell me how to do this.  Can anyone help?

        Jennymbell, never fear help is here!
    Have you tried contacting your IT department for assistance? You can visit http://bit.ly/QECbGh for steps on how to enterprise activation.
    Keep me posted if you need further assistance.
    John B
    Follow us on Twitter @VZWSupport

  • How to use bapi response in XI

    HI ALL,
             Can any one suggest me, how to use bapi response in XI as a sender.
    I m using bapi BAPI_BCA_BANKSTATEMENT_EXECUTE , I am executing  this bapi manually ,but want to use this BAPI RESPONSE in XI as a sender and map it with receiver.
    can i have any idea about how to do it, or can i have the idoc which is used by this bapi BAPI_BCA_BANKSTATEMENT_EXECUTE.
    THANX
    HONEY

    Hi Honey,
    Have a look at these
    -Configuring the Sender RFC Adapter - step by step
    /people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
    -Troubleshooting - RFC and SOAP scenarios
    /people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009
    -sender RFC (forum thread)
    Is it possible to use the RFC sender adapter for asynchronous calls?
    Regards,
    Sreenivas

  • How to use BAPI with Decision Dialogue

    Hi Gurus
    would you please let me know how to use BAPI with decision dialogue in guided procedure .
    I have a BAPI checking logon credentials for the user . how to use this BAPI for making decisions that is if the logon is correct then perform one process else go to logon screen again .
    Thanks in advance
    Regards Namita

    Hi Namita,
    1. Follow the steps mentioned in section <a href="http://help.sap.com/saphelp_crm50/helpdata/en/33/198141f906040de10000000a1550b0/frameset.htm">Exposing an RFC-Enabled Function Module as a Callable Object</a> to use the BAPI as a Callable Object.
    2. Follow the steps mentioned in tutorial # 93 and 93a in the CAF Tutorial Center for the decision part.
    Hope these helps.
    Nilay

  • How to use BAPI function module for maintaing product type to material

    Hi,
    Can you pls suggest me how to use BAPI Fuction module CCAP_REV_LEVEL_MAINTAIN
    for maintaining the product type for the material using change number.
    Pts will be rewarded.
    Best Regards,
    Padhy

    Hi,
    Can you pls suggest me how to use BAPI Fuction module CCAP_REV_LEVEL_MAINTAIN
    for maintaining the product type for the material using change number.
    Pts will be rewarded.
    Best Regards,
    Padhy

  • How to use Bapi

    Hi
    How to use bapis
    BAPI_COMPANYCODE_GET_PERIOD
    BAPI_CCODE_GET_FIRSTDAY_PERIOD'
    BAPI_GL_ACC_GETPERIODBALANCES'

    BAPI_COMPANYCODE_GET_PERIOD:
    To retrieve the fiscal year variant for a given date u can use the following function module
    Retrieve fiscal year and period
    The below code shows how to use function modules BAPI_COMPANYCODE_GET_PERIOD and
    DETERMINE_PERIOD to retrieve fiscal year and fiscal period for a specific date.
    *: Report: ZFISCALYR :
    *: Author: www.SAPdev.co.uk :
    *: Date : 2004 :
    *: Description: Demonstrates how to return the corresponding fiscal :
    *: year and posting period for a company code and posting :
    *: date or posting date and fiscal year variant. :
    REPORT zfiscalyr NO STANDARD PAGE HEADING.
    TABLES: ekko.
    PARAMETERS: p_bukrs TYPE ekko-bukrs,
    p_bedat TYPE ekko-bedat.
    DATA: gd_fiscalyr TYPE bapi0002_4-fiscal_year,
    gd_fiscalp TYPE bapi0002_4-fiscal_period.
    DATA: gd_fiscalyr2 TYPE T009B-BDATJ,
    gd_fiscalp2 TYPE bapi0002_4-fiscal_period.
    DATA: gd_periv TYPE t009-periv.
    *START-OF-SELECTION.
    START-OF-SELECTION.
    get fiscal year and period - (requires date and company code)
    CALL FUNCTION 'BAPI_COMPANYCODE_GET_PERIOD'
    EXPORTING
    companycodeid = p_bukrs
    posting_date = p_bedat
    IMPORTING
    fiscal_year = gd_fiscalyr
    fiscal_period = gd_fiscalp.
    Alternative fiscal year function module
    - (requires date and fiscal year variant code from T009 table)
    gets first entry in fiscal year variant table (will need to choose
    correct one from table rather than just using first entry)
    SELECT SINGLE periv
    FROM t009
    INTO gd_periv.
    get fiscal year and period
    CALL FUNCTION 'DETERMINE_PERIOD'
    EXPORTING
    date = p_bedat
    PERIOD_IN = '000'
    version = gd_periv
    IMPORTING
    period = gd_fiscalp2
    year = gd_fiscalyr2
    EXCEPTIONS
    period_in_not_valid = 1
    period_not_assigned = 2
    version_undefined = 3
    OTHERS = 4.************************************************************************
    *END-OF-SELECTION.
    END-OF-SELECTION.
    WRITE:/ 'From function module: BAPI_COMPANYCODE_GET_PERIOD',
    / 'Fiscal year is:', gd_fiscalyr,
    / 'Fiscal period is:', gd_fiscalp.
    SKIP.
    WRITE:/ 'From function module: DETERMINE_PERIOD',
    / 'Fiscal year is:', gd_fiscalyr2,
    / 'Fiscal period is:', gd_fiscalp2.
    how to get the fiscal year
    BAPI_CCODE_GET_FIRSTDAY_PERIOD:
    CALL FUNCTION 'BAPI_CCODE_GET_FIRSTDAY_PERIOD'
    EXPORTING
    companycodeid = v_bukrs
    fiscal_period = marv-lfmon
    fiscal_year = marv-lfgja
    IMPORTING
    first_day_of_period = v_postdate
    return = i_return1.
    BAPI
    function module which could calculate the previous month's start date.....
    BAPI_GL_ACC_GETPERIODBALANCES:
    Transactions or BAPI for GL account
    Please give me reward point...

Maybe you are looking for