How to use BC adapter

Dear Friends,
   This is Shalini,
                 My Requirement is Third party system is sending the Purchase Order in XML file they are using Business connectors.
They are sending the PO to XI System , from XI  that PO's sending TO R/3 System
After  Sales Order creatin in R/3 we have to send the Confiramtion to that Business connector system.
How to do I don't know.
Please help me, this is very helpful .
Regards,
Shalini Shah

hi,
but what you don't know?
do you have BC details necessary for BC adapter?
if so then you just send the XML file to this adapter
is anything not working with that ?
Regards,
Michal Krawczyk

Similar Messages

  • How to use File Adapter with hierarchial Structure?

    Hi,
    How to use File Adapter with hierarchial Structure like..
    Data:
    --Header Details:
    Line Item Details:
    Data
    Bcoz I am getting a Flatfile in a hierarchial way as shown below.
    Header Details :1
    Line Item a
    Line Item b
    Header Details :2
    Line Item c
    Line Item d
    Kishore

    Hey Kishore,
    In order to create a structure you need to use the file with convertion mode on the sending communication channel of the file adapter.
    check the link for the needed configuration paramters.
    If the structure is more complexed you can use the Contetnt master(CM) from itemfield which allows to ceate XML file from complex flat files and more.
    <a href="http://help.sap.com/saphelp_erp2005/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm">File sender adapter</a>
    If you have any question i'll be more than happy to assist.
    Nimrod Gisis

  • How to use File Adapter in BPEL

    Hi,
    How to use File Adapter in BPEL. I am using Oracle SOA 10g. Any sample or best example in blog or elsewhere ?

    Hi,
    Please check the below links for samples on how to use file adapter in BPEL (in 10g/11g usage is same) and let me know any further queries.
    11g - http://blogs.oracle.com/theshortenspot/entry/soa_suite_integration_part_3_l
    10g - http://erpschools.com/articles/bpel-file-adapter-tutorial

  • How to use the adapter framework sample_ra.

    hi..
    I have deployed the sample_ra adapter framework code through NWDS. Now how to use the adapter framework into my scenario.Please answer elaborately .How to call this adapter framework while configuring the communication channel.

    hi
    Follow these links I think it will helps you
    http://www.sap-hefte.de/download/dateien/1241/140_leseprobe.pdf
    NWDS and  generate java proxy
    http://help.sap.com/saphelp_nw2004s/helpdata/en/32/43d84072378031e10000000a1550b0/content.htm
    http://msdn2.microsoft.com/en-us/library/ms944509.aspx
    thanks and regards
    santosh

  • How to use Database adapter as inbound adapter without having polling strategies?

    Hi All,
    I have a requirement wherein I have to use Database adapter to retrieve the data for every half an hour from one(X app) database and update that data into another application(Y app) .That database adapter will be along with BPEL process.My Flow would be like this:
    Database Adapter( In 'exposed services' section) ----->   BPEL (in 'Components') -----> Y app service( in 'External References' section)
    My questions for each step are below
         1) I have to retrieve the data from database(x app database) for every half an hour.So I have to schedule my whole process such that it should execute for every half an hour.
    Means I have to get  whatever the data is updated in the last half an hour in that database.
          The database adapter should be inbound in SOA composite editor(in 'Exposed services' section).
    But in order to have inbound adapter,we have select the 'Poll for New or Changed Records in a Table' option in turn we have to select one of polling operations below:
             Delete the Row(s) that were Read
    Update a Field in the [Table_Name] Table (Logical Delete)
    Update a Sequencing Table
    Update an External Sequencing Table on a Different Database
    Control Table Strategy
    But the problem is I don't have any control on the database(X app database) ,So (I can't update any data on that table,because that table may not have a field or table to update the processed rows)I can't choose any of the above operations.
    How can I achieve what I want that is to retrieve the data and schedule the process?
    Thanks in advance.

    Hi Heckler,
      Thank you very much for your answer that I can proceed further somehow.
    I still need to have some clarifications.
    In order to have a process which retrieves the data (Inbound operation) and updates the data into other application, the data(from X app)  should be the request(through DB adapter) of the BPEL process.
    X app does not do anything to send.We have(the BPEL process) to receive the data (or) no event is triggered.
    The flow :
    Database Adapter( In 'exposed services' section to retrieve data) ----->   BPEL (in 'Components') -----> Y app service( in 'External References' section)
    How can we ensure the data will be  request to BPEL process(means it will be in 'exposed services' section in SOA composite editor) for every half an hour if we use pick activity and database adapter as first activity?
    When we use ''Poll for New or Changed Records in a Table' ,then only adapter becomes inbound and comes into the 'exposed services' section.I can't use it as I don't have any control on the source table.
    I have this confusion before starting the process.Please help me to clear out the doubts.
    And this whole process should be executed automaticallly for every half an hour(means it creates instance for every half an hour)  Once we build the BPEL process.
    How to schedule it?
    And where do I need to create control table ?You mean I have to use some different database where in I have to create the table?

  • How to use Database Adapter in BPEL

    I want to use Database Adapter in BPEL to transfer data from one table to other table and the data is still hold in the read table?
    I can find a example from http://download.oracle.com/docs/cd/B31017_01/integrate.1013/b28994/adptr_db.htm#BDCIGDCB.
    And the general design of my BPEL is as following:
    1. Add a "status" column to the read table. And alter the value of status column of all data in read table to "unreaded".
    2. Then create a empty BPEL (BPELAdapter) Project.
    3. Add a Database Adapter:
    (1) In step 1 of Adapter Configuration Wizard, configure the Service Name to datain.
    (2) In step 2, configure the database connection.
    (3) In step 3, choose "Poll for New or Changed Records in a Table".
    (4) Then click Import Tables button, and choose the read table.
    (5) In step 5, choose a column.
    (6) Don’t do anything in step 6 and 7.
    (7) In step 8, choose "Update a Field in the [Datain] Table (Logical Delete)".
    (8) In step 9, configure Logical Delete Field to STATUS, configure Read Value to readed and configure Unread Value to unreaded.
    (9) Don’t do anything in step 10 and 11.
    4. Add a receive activity to connect to above database adapter.
    5. Add another Database Adapter. Then configure this database adapter service WSDL:
    (1) In step 1 of Adapter Configuration Wizard, configure the Service Name to dataout.
    (2) In step 2, configure the database connection.
    (3) In step 3, choose Perform an Operation on a Table (and all items under it).
    (4) Then click Import Tables button, and choose the write table.
    (5) In step 5, choose a column.
    (6) Don’t do anything in step 6, 7 and 8.
    6. Add a invoke activity to connect to above database adapter.
    7. Add a assign activity between the receive activity and invoke activity. And configure the assign copy operation.
    But after I deploy this BPEL project to the BPEL server and invoke this project, I get following error. Meanwhile, this BPEL don't take effect.
    The following exception occured while processing this request:
    Can't find partnerLinkType 2.
    in
    "file:/D:/soft/SOASuite/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_BPELAdapter_1.0_e82210b05e4d3e997eed581d0d220293.tmp/_BPELAdapter.wsdl" WSDL to find PartnerLinkType "{http://xmlns.oracle.com/pcbpel/adapter/db/datain/datain_plt"。
    How to resolve?
    Thanks,
    Melody

    Now, I can insert data into the table through Database Adapter.
    But still can't select data from the table through Database Adapter.
    Above error still happen when invoke the read database table with Database Adapter project:
    Can't find partnerLinkType 2.
    in
    "file:/D:/soft/SOASuite/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_BPELAdapter_1.0_e82210b05e4d3e997eed581d0d220293.tmp/_BPELAdapter.wsdl" WSDL to find PartnerLinkType "{http://xmlns.oracle.com/pcbpel/adapter/db/datain/datain_plt"。

  • How to use File Adapter Receiver to write attachments

    Hi,
    i have a scenario, in which our own XInotes adapter sends an XIMessage from an IBM Lotus Notes database into XI. This XIMessage contains an XML document as application main document and several PDF files as additional attachments 
    On the receiver side, i must use a File Adapter to write both the XML documents and the PDF attachments into a directory.
    The problem is i don't know how to use the file adapter receiver to write the attachments. In the Channel Monitoring, i can see that all PDF files are transferred to the file receiver. But the file adapter writes only the XML document into the directory.
    I've also tried the AF_Modules/PayloadSwapBean, but it can only swap one PDF file into the application payload. And the file name must be hard coded in the module configuration as swap.KeyName.
    Could anyone give me any ideas?
    thanks a lot in advance
    Xiang

    hi,
    receiver file adapters do not supprt attachments.
    Only File Sender adapter is capable of handling attachments not the receiver.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/4b/a20c4cfea96b498b1e1af3f32f0670/frameset.htm
    Configuring the sender FILE adapter
    The sender file adapter is configured to pick the normal payload (file1.xml), which is specified in the File
    access parameters, and the additional image file (file1.jpg) that is to be sent as an attachment is configured
    under the Additional File(s) as shown in the screenshot below. The file type would still remain binary.
    Since, by default, XI sends payload and attachments in XML format, we need to call two beans, namely the
    MessageTransformBean and the PayloadSwapBean to help us is transforming the content to jpeg format
    and also change the file extension.
    The PayloadSwapBean module is used to replace the application payload of the XI message that holds the
    data with another payload which is appended to the message as an attachment. In our case, the payload
    would be file1.xml whereas the attachment would be file1.jpg
    The swap module is denoted in our scenario with the module key ‘swap’. It has two parameters from the
    MIME header.
    regards,
    pradeep.

  • How to Use JCA adapter

    Hello.
    I have a JCA compliant adapter that i like to use to integrate a legacy application but i have seen no information on how to use a JCA adapter from Oracle Integration.
    Any help is appreciated.

    Hi Gerardo
    Oracle Interconnect 10g enables third party adapter integration through a proprietary SDK, which is not JCA compliant.
    Oracle ProcessConnect relies on JCA (plus more) for communicating with standard and third party adapters. Since ProcessConnect 10g is based on JCA 1.0 (due to spec availability), Oracle had to extend the JCA 'contract' with certain Design Time and Runtime inbound API's which an adapter also must implement in order to seamlessly interoperate with ProcessConnect. Oracle can provide you with the necessary ADK (Adapter Development Kit) if you join the Early Access program.
    Please indicate here if you would like to join this program and I will provide you with pertinent contact information so you can initiate this.

  • How to use File Adapter to transport files

    Hi,
    Can i use File Adapter Additional Files settings to Transfer files from one system to other without conversion?
    File Adapter's Additional Files documentation says "additional attachments require a receiver that can process them". In my case receiver is also
    File Adapter.
    Please let me know if there is any other way to achive this.
    Thanks in Advance
    Jayant

    Hi Jayant -
    Here is the link to the documentation related to this:
    http://help.sap.com/saphelp_nw04/helpdata/en/3c/b4a6490a08cd41a8c91759c3d2f401/content.htm
    Notice in "Rules for Additional Files":
    "Messages with additional attachments require a receiver that can process them."
    Currently, the receiver file adapter does not support the processing of attachments.
    Regards,
    Jin

  • Re:  Hi friends How to use sseeburger adapter in SAP PI

    I am newly in sap pi.
    can any one explain Seeburger adapter briefly

    Hi Ranga,
        Welcome to SCN.
    As you are new around here, i suggest you to please search the forum before posting your question.
    To answer to your question, Seeburger is the name of the company which provides its set of adapters for SAP PI.
    I assume that you are talking about the Seerburger AS2 adapter, as it is the mostly used seeburger adapter.
    The Seeburger AS2 adapter is capable of translating an EDIFACT/ ANSIX12 message/file into a format that is understood by PI and vice versa.
    It is also capable of handling the AS2 transport protocol (EDI Over internet).
    Best Regards,
    Ravi

  • How to use AQ Adapter for Enqueue and Dequeue in BPEL process

    Can anyone help me how to use Enqueue and Dequeue in BPEL process ? Any good sample or material /tutorial??
    Thanks

    You shoul create a while loop, that loops through XML payload for each row. Than you can process each individual row. See also example:
    C:\orabpel\samples\tutorials\112.Arrays\ArraySample.bpel

  • How to use wireless adapter in Satellite C660D?

    Hi everyone!
    Got crazy searching for the wireless adapter in Satellite C660D-164..does it have one inbuilt? or do I have to buy an external one? Can't figure out how to set up wi-fi and bluetooth. The manual is non descriptive.
    Installed all the drivers form site.
    Pleas help asap.

    Hi
    In the device manager you can find the list of all available devices.
    Under Network Adapters you should find the available Wlan card.
    In order to use the Wlan, you have to enable this firstly.
    Use Fn + F8 in order to switch ON the Wlan.
    Then you should see a small icon in the task bar (right bottom corner). Right click on this and check if you Wlan Home Network is visible.
    Then insert the encryption password and usually the notebook should connect to the home Wlan.

  • Wrting zip Data using File adapter

    Did any one tried or implemented writing zip/gz file using File adapter.
    I know how to write opaque data using Base64Binary. But i am not getting on how to use file adapter for writing zip file.
    Any help / suggestions are greatly appreciated.
    Thanks !!

    Thanks for the reply, have been using opaque for a while now and know the read & write for that.
    My problem is i am not able to get how i can write compressed data , writing binary data is fine i can use string->encode->base64binary->opaque and can write that.
    But that will not be the compressed form.
    Thanks !!

  • How to use QPORTAL in MDM1.6

    Hi,
    Can anybody help me ,how to use QPORTAL adapter in MDM1.6 and what is the use of QPORTAL ?I am aware of FPORTAL and DPORTAL.I have some idea that this QPORTAL is basically used with JMS for queuing purpose.Can u explain in detail ?
    Thanks in advance.
    Edited by: 834709 on Feb 16, 2011 9:50 PM

    Hi,
    the QPORTAL is used to poll messages from a JMS queue.
    In order to make QPORTAL work, you need first to install a JMS server on your system. For instance you can use this one: http://mq.java.net/.
    You need to configure a QueueConnectionFactory on the JMS server and store the configuration on a +.bindings+ file in folder C:\LODESTAR\LTMH\Runtime\jndi. This configuration is required to allow the Adapter to know where the JMS Server is.
    You need then to add the JMS server name on menu tools & utils -> LTMH/Adapter Components -> JMS Server.
    Then, for each Queue you plan to use you need to create a record on tools & utils -> LTMH/Adapter Components -> JMS Queue
    Enjoy :)

  • How to connect sound or audio to my tv using hdmi adapter. I tried to connect thru sound settings but my tv is not found.

    how to connect sound to my tv set using hdmi adapter. Im using 2009 macbook pro 13". I went to sound settings then output and it shows internal speaker built- in, it wont locate my tv set. pls. help, thanks

    You probably can't because it looks like your MacBook Pro is too old to carry audio over HDMI. You will need to run a separate audio cable from the audio out port on the MacBook Pro to the audio in port on the TV.
    Check your MacBook Pro model year against the list in this Apple tech note:
    About Mini DisplayPort to HDMI adapters
    Learn about the Mini DisplayPort in the latest Mac models that enables audio and video output for DisplayPort and HDMI.

Maybe you are looking for