How to use buttons in hcm process and forms?

Hi Experts,
I want to know how to use buttons in HCM process and form.
And when i click on the button it was validating all the fields and it was throwing an error ( complete SACHP fields) i am not using this filed in any where of my form.
So, please help in getting out of this error. And help me with some document, which method will trigger once we click on the button.
Thanks & Regards,
Rocky

You do not need to add this field to your list. In the view V_T588MFPROPS (SAP delivered), this field is set as mandatory. In configuration, you must maintain the view V_T588MFPROPC (Customer area) and make sure the field is not set to mandatory. This will override the SAP delivered setting and the error message will be not be displayed.
Derrick Banks
Banks & Company, LLC

Similar Messages

Dynamic Parallel Approval for HCM Process and Forms

Hi everyone,
I have a scenario where I need to use the "Dynamic Parallel Approval" (or to keep it simple, initially I tried using the "Parallel Approval" wizard)for a workflow used in the HCM Process and Forms.
The standard task for approval in process and forms is TS17900101. I have mentioned a multiline container in the Miscellaneous tab of this task. However,I was unable to use this task in the wizard. There are no results attahced to this task unlike any other standard approval task (like TS30200147). I need to use the task TS17900101 in the workflow assigned to process and forms, but not sure how to handle this scenario (parallel approval).
If this is not the right way of doing it, Is there any workaround for "Parallel Approval" in HCM Process and Forms.
Could anybody throw some light around this area.
Thanks for your help.
- MM

Thanks Anuj. But I believe, the container element that I add in the miscellaneous tab does not necessarily have to be used in the agent assignment. The multiline container is just to instantiate the workitem 'n' number of times. Correct me if I am wrong.
My concern is that I was unable to use this approval task (TS17900101) in the workflow wizard for dynamic paralle/parallel approval.
Arghadip - Thanks for your suggestion. I have seen some your nice contributions in the WF forum.
I actually tried using the 'Blocks'. But this is what I ran into. When I send multiple approval requests (say 3), if one person has approved it and the second has rejected it,I need to take out the workitem from the third person's list (because it has been rejected by someone in the group). I am not sure if this is possible using Blocks. And in my case the third person is still having the workitem, but gets a dump/error when he tries to open it.
Also, if any one has rejected the request, I do not have to wait for the rest to take any action on the workitem and proceed further. But I guess in 'Blocks' it will not let you go out unless every workitem has been processed.
To summarize,here's what I need - I need to come out of the block for two conditions. One, if everyone has approved, comeout of the block with an apprval flag. Two, if anyone has rejected (even if some have not processed their workitem), delete the workitems from others inbox and come out of the block with a rejection flag.
So, any kind of input or suggestions on how this could be handled would be highly appreciated.
Thanks
MM

Worklow in HCM process and Forms

Hi Gurus,
We have recently upgraded from HR SP level 14 to level 24. After the HRSP upgrade, we find that the workflows used in the HCM process and forms which were working fine earlier are not working now.
To trigger the workflow, I am using the class CL_HRASR00_WF_PROCESS_OBJECT and event TRIGGERED. First, we faced the problem in the standard task TS17900110,which imports the values from form to workflow container.After Implementing the SAP notes suggested by SAP,the workflow got triggered and the values got imported and it is working fine now.
Now we are facing the problem in the 2nd level,where the manager trying to 'Approve or Reject'.The information message is thrown in backend HRASR_DT as, "Work Item not found; check workflow Log".
Standard Task used in the 2nd level TS17900101 to approve/reject.
Can anyone suggest how to proceed on this issue ?
Regards,
Paramasivan Krishnan

Hi Paramasivan Krishnan,
First, welcome you to SCN forum. However, I am afraid you posted on a wrong forum. Here is dedicate to SAP Business One. Not related to HCM.
Thanks,
Gordon

Use HCM processes and Forms without using the Enterprise Portal

is it possible to leverage existing HR Admin Services (HCM processes and Forms) functionality without using the Enterprise Portal?
1) Create an Adobe form and Interface using SFP
2) Set up ISR and Form Scenario
3) Set up Forms configuration to use existing Backend and generic Services
4) Set up workflow to updated Backend using Services
is it possible to do the above steps and not use the Portal? If Yes, how do we present the forms to the Manager, and provide different buttons that appears on the Portal by default?
Any ideas will be greatly appreciated.
Thanks,
Saurabh

Hi Saurabh,
your assumptions and findings (items can not be started from the backend workflow inbox etc.) are correct: These processes can not be started without the Portal and it is not intended to do this.
The above mentioned backend report are only forseen for implementation and testing purposes and not for productive use.
In addition to the fact, that you already can't execute the work items a lot of other features of the framework (Process Browser etc.) are only available through the Portal.
Best Regards
Michael Bonrat - Solution Manager HCM Processes and Forms
Info about HCM Processes and Forms:
www.service.sap.com/erp:
- SAP ERP Human Capital Management -> Workforce Process Management -> HCM Processes and Forms

Use of Table in HCM Processes and Forms

Hi Guys,
I am developing an Adobe form for the HCM process and forms .My requirement is to populate table values in the adobe form based on a value got in the backend service.
I tried declaring an internal table in the backend service but in vain.So decided to code inside the context of the form.But was not able to use the parameters available in the
Now the trouble is how to get the value from the form scenario field and populate that table.
Please provide your thoughts.
Regards,
Aravind.P

Hello Aravind,
Could you please tell us how you solved this ?
Edited by: Gopi chelvam on Mar 24, 2010 6:13 AM

Use of BADI in HCM Processes and Forms

Hello Friend's,
I am feeling trouble in learning HCM Processes and Forms.. Actually i dont know what is the role of BADI in HCM Processes and Forms. one more thing i need to know is OPERATION for backend service. What is the use of operation and how i can trigger the badi methods when running in portal.

Hi Ramesh,
Hope this is not too late to help.
Do_operation will be called whenever there is roundtrip, by triggering event USER_EVENT_CHECK using form scripting.
example,
To trigger roundtrip for a drop down list, under exit* event add this
xfa.record.CONTROL_PARAM.ISR_EVENT.value = "USER_EVENT_CHECK";
ContainerFoundation_JS.SendMessageToContainer(event.target, "submit", "", "", "", "");
regards,
Xiang Li

How to create Generic Service in HCM Processes and Forms

Hi Friend's,
Can you tell me what are the steps to create Generic Service in HCM Processes and Forms and also tell me how to link Generic service with BADI.
   In SPRO, I defined one customized generic service, but i cant able to implement the generic service to BADI. Moreover it's asking for Composite Badi Implementation name.
   So tell me the steps which guide me to create that.. Waiting for your replies....

hi ramesh,
                  use HRASR00GEN_SERVICE_BASIC create ur own.
Madhukar

Creating a new position and updating IT 1028 using HCM processes and forms

I have to create a new position and update the related infotypes using the design time framework of HCM processes and forms. The problem I am facing is the info type 1028 is not a part of the de coupled infotype framework and does not appear in the service fields list. How can I update the infotype 1028? I was thinking of updating it using the FLUSH method of the class implementing the ADV services interface IF_HRASR00GEN_SERVICE_ADVANCED by calling the function module RH_INSERT_INFTY. But, how do I get the position ID created? Is there any other way of achieving this? Please help as soon as possible.

HI
Create one Function Module to return all the vacant positions and load that in a drop down.
For IT1028 you have to update via the RH_INSERT_INFTY.
Kind Regards,
Mukesh

How to create Digital Personnel Foile for HCM Processes and Forms

Hi I am creating HCM Processes and Forms using FPM Forms. Now to print these forms Alternate Adobe forms also developed. But once the entire process is completed by HR Admin and in future if they want to see the already processed form and if they want to take print out they should be able to do it. So, based on some knowledge I am assuming we can achieve this by Digital Personnel file creation. Can any one please confirm. Whether they can open already processed form and how to get print these forms as this is FPM form and no print option is available.
In order to configure DPF, can any one share step by step procedure to configure DPF. I dont have any idea on SAP Records Management as I felt this basic is required. Friends help me here.
Regards,
Nayani.

This seems possible.
Refer here ... Print Form (FPM Form Type Only) - HCM Processes and Forms - SAP Library
For DPF - ensure you have used the anchor correctly refer Save PDF file added to processes and forms WDA
Regarding the possibility of being able to print it from process browser - I am not sure.
Process browser for latest release is documented here...
http://help.sap.com/erp_hcm_ias_2013_02/helpdata/en/14/9a3516789f4aceb6bb910df1220869/content.htm?frameset=/en/43/1d639b3fce3566e10000000a11466f/frameset.htm
Regards.

HCM Process and Forms - Create and End record using the same form scenario

Hi All,
I have the following requirement while using HCM Processes and Forms: Using one form/scenario I need to both create a record or be able to end a record for infotype 841. When looking at the back-end service SAP_PA I have operations Create, Change, Change without delimiting and Delete. My requirement would be to do both a create and a delete I guess, but these two can't be selected at the same time while configuring the form scenario.
I was thinking about doing somethign with the startdate and enddate instead of using the effective date. But I have no clue how to do that.
How would this be possible?
Thanks,
J

You are correct in assuming that you cannot have a create and delete on the same infotype. The config will not allow it. Instead, configure the create and then do the delete via a call to you own method in the workflow or via the advanced generic service
Cheers
Ian

Infotype 0000 Creation using HCM Processes and forms in MSS

Hi,
I need to create an Action for Transfer an employee using HCM Processes and Forms. So, my form should update infotype 0000, 0001, 0008 etc.
But when I provide create operation for infotype 0000, system is throwing short dump. When I change the operation to change nothing was creating in infotype 0000 for that respective employee. Is there any way to update infotype 0000 using HCM Processes and forms. Please help me here.
Thanks & Regards,
Nayani.

Hi Chris,
Thanks for your reply mate.
I understand that for IT0000 update we don't have to configure it explicitly.We just assign values to MASSG and MASSN and IT0000 should update. I am doing exactly that.
For the "condition" we do have multiple rules for that and I am familiar about the trickthat the rule fields must be part of the SAP_PA service which is actually making the update. That's all in place and that's working fine.
Now coming to the problem -
The "action" is "Return from Career Break" where the only PA infotype that has to be updated is IT0000. Besides that we are updating Absences,IT2001.
I have tested the process thoroughly and it seems that the system does not allow an IT0000 update without any other PA data change. To test this, I added a PA infotype update in my config and at that time IT0000 got updated beautifully. But when I am trying to update only IT0000, it fails.
To solve the issue, I had a discussion with my team and we have decided to copy IT0001 along with IT0000. So as of now, we have sorted out a workaround but the technical issue is something I would like to look into.
If you figure out anything then please let me know.
Appreciate your help.
Thanks,
Saikat

How to start sap hcm process and forms in ess

Hi,
Here is the requirement for us i.e., employee (Role SAP_ASR_EMPLOYEE) has to initiate the HCM Process and Forms in the ESS. But as per the standard the possibilities are initiated by the Mangers and HR Administrators... How to solve it...
Regards,
Santhosh Kumar R

Hi,
Process can be initiated by the employees in the ESS. However you need to link your HCM P & F in the ESS l.The standard initiator role for the employee is 'HRASRD'.
Try attaching this role in the role assignment section of the process.
Regards,
Aravind.P

Default value in dropdown field for FPM form in HCM Processes and forms

Hi Experts,
I am developing HCM Processes and forms using FPM forms and I had a dropdown list contains ten values. So, every time while opening the form first time, my dropdown field should be defaulted with fifth value from the list. How can we achieve this in dropdown field related to FPM Form.
Please guide me.
Regards,
Nayani.

You would have to assign the default value to one your custom generic services.
Regards.
PS: There are posts which talk about generic services , make yourself comfortable with the concept of generic services.

Query on HCM Processes and Forms

Hi
I am facing some issues in configuring Hiring Forms in HCM Processes and Forms. I can place them in 2 baskets and describe each of them below. I would appreciate any advise on ways and means to overcome these errors.
Basket #1
I want to use the standard forms SHU1, SHU2 in development environment to understand the HCM P&F functionalities. I copied these form scenarios from client 000 and did all the configurations as outline in IMG activity HRAdministrative Services >> Configuration of Forms and Processes >> Sample Processes for HCM Process and Forms.
When I run a check using HR Administrative Services >> Configuration of Forms and Processes >> Configuration of Forms >> Check Consistency of Form Scenarios and select Form name, I get errors along following lines:
u2022     Error Message Sample#1 Form scen SHU1 vers. 00000 serv. SAP_PA: Only one deflt value allowed for field I0009_ZLSCH
u2022     Error Message Sample#2 Form scen. SHU1 vers. 00000 service SAP_PA: Field I0007_ARBST default value is not created
u2022     Error Message Sample#3 ISR scenario SHU1 version 00000: Field I0001_BUKRS is missing
u2022     Error Message Sample#4 Form scen. SHU1 vers. 00000: Field I0007_ARBST service for default values not required
However, at the bottom of the log I see this message in Green: Form scenario SHU1 version 00000: Form scenario is consistent
I tried to make the changes as suggested in the Long Text for each of these messages. Probably due to the fact that I am using standard delivered forms, I get this message u201CDo not make any changes (SAP entry)u201D and I am unable to save the changes.
Basket #2
In this basket I have Org_Change form and have managed to go the whole nine yards and complete the configuration in ECC. The consistency checks for process and forms are in green. However, I am unable to start the process through Portal. I get this message u201Cno data availableu201D when I try to select a process.
Among the 5 roles delivered in SAP as initiators for processors u2013I am interested in 3 of them HRASARA (for HR Administrator). I have configured HRASRA and HRASRB as initiators for Org_Change. However, I am not able to figure out how to link these roles to portal roles such as SAP_ASR_ADMINISTRATOR, SAP_ASR_MANAGER etc.
I would appreciate any advise on ways and means to overcome these errors.
Thanks
Subhash

Have you been able to fix your issue in Basket # 2 ?

Adobe HCM Processes and Forms Start processes iView error

Hi,
We are implementing Adobe HCM processes. The forms based on the PCR technology are working fine. However, we want the new HCM Processes and Forms technology. We have implemented Business packages for MSS, HR Administrator and XSS (PC_GUI). ADS is configured correctly as the PCR Adobe forms are working fine.
We want to use the WebDynpro version of HCMPF and NOT the ABAP version. When starting the Start Processes IView (sap.com/paasrprocst) we get the error:
com.sapportals.portal.prt.runtime.PortalRuntimeException: Failed in WD JNDI lookup. javax.naming.NameNotFoundException: No child found in WebDynproContext with name paasrprocst
at com.sap.portal.pcm.iview.admin.AdminBaseiView.createAttrSetLayersList(AdminBaseiView.java:361)
    at com.sap.portal.pcm.iview.admin.AdminBaseiView.getAttrSetLayersList(AdminBaseiView.java:205)
    at com.sap.portal.pcm.iview.admin.AdminBaseiView.getCustomImplementation(AdminBaseiView.java:148)
    at com.sap.portal.pcm.admin.PcmAdminBase.getImplementation(PcmAdminBase.java:530)
    at com.sapportals.portal.ivs.iviews.IviewServiceObjectFactory.getObjectInstance(IviewServiceObjectFactory.java:448)
    ... 40 more
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type HTML Client
User agent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; InfoPath.1; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 1.1.4322; .NET CLR 3.0.04506.648)
Version null
DOM version null
Client Type msie6
Client Type Profile ie6
ActiveX enabled
Cookies enabled
Frames enabled
Java Applets enabled
JavaScript enabled
Tables enabled
VB Script enabled
Server
Web Dynpro Runtime Vendor: SAP, build ID: 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:13:14[UTC], changelist=455669, host=pwdfm101), build date: Sat Jan 19 11:19:58 AST 2008
J2EE Engine 7.00 patchlevel 109044.44
Java VM Java HotSpot(TM) 64-Bit Server VM, version:1.4.2_12-b03, vendor: Sun Microsystems Inc.
Operating system SunOS, version: 5.10, architecture: sparcv9
Session & Other
Session Locale en
Time of Failure Thu Mar 13 13:07:45 AST 2008 (Java Time: 1205402865554)
Web Dynpro Code Generation Infos
sap.com/pb
SapDictionaryGenerationCore 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:42[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapDictionaryGenerationTemplates 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:50[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapGenerationFrameworkCore 7.0013.20060719095755.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:44:42[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
SapIdeWebDynproCheckLayer 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:26[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapMetamodelCommon 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:30[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelCore 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:23[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelDictionary 7.0013.20060719095619.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:54:53[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
SapMetamodelWebDynpro 7.0013.20070703112649.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:00:50[UTC], changelist=454024, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationCTemplates 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
SapWebDynproGenerationCore 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:37[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationTemplates 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
sap.com/tcwddispwda
No information available null
sap.com/pb_api
SapDictionaryGenerationCore 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:42[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapDictionaryGenerationTemplates 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:50[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapGenerationFrameworkCore 7.0013.20060719095755.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:44:42[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
SapIdeWebDynproCheckLayer 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:26[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapMetamodelCommon 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:30[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelCore 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:23[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapMetamodelDictionary 7.0013.20060719095619.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:54:53[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
SapMetamodelWebDynpro 7.0013.20070703112649.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:00:50[UTC], changelist=454024, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationCTemplates 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
SapWebDynproGenerationCore 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:37[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationTemplates 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
sap.com/tcwdcorecomp
No information available null
Detailed Error Information
Detailed Exception Chain
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to load page
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:527)
     at com.sap.portal.pb.PageBuilder.wdDoInit(PageBuilder.java:191)
     at com.sap.portal.pb.wdp.InternalPageBuilder.wdDoInit(InternalPageBuilder.java:150)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:748)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:283)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: javax.naming.NamingException: Failed in WD JNDI lookup. javax.naming.NameNotFoundException: No child found in WebDynproContext with name paasrprocst [Root exception is com.sapportals.portal.prt.runtime.PortalRuntimeException: Failed in WD JNDI lookup. javax.naming.NameNotFoundException: No child found in WebDynproContext with name paasrprocst]
     at com.sapportals.portal.pcd.gl.JndiProxy.getObjectInstance(JndiProxy.java:51)
     at com.sapportals.portal.pcd.gl.PcdGlContext.getSemanticObject(PcdGlContext.java:919)
     at com.sapportals.portal.pcd.gl.PcdGlContext.getSemanticObject(PcdGlContext.java:692)
     at com.sapportals.portal.pcd.gl.PcdGlContext.lookup(PcdGlContext.java:69)
     at com.sapportals.portal.pcd.gl.PcdURLContext.lookup(PcdURLContext.java:238)
     at javax.naming.InitialContext.lookup(InitialContext.java:347)
     at com.sap.portal.pb.data.PcdManager.doInit(PcdManager.java:72)
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:525)
     ... 31 more
Caused by: com.sapportals.portal.prt.runtime.PortalRuntimeException: Failed in WD JNDI lookup. javax.naming.NameNotFoundException: No child found in WebDynproContext with name paasrprocst
     at com.sap.portal.pcm.iview.admin.AdminBaseiView.createAttrSetLayersList(AdminBaseiView.java:361)
     at com.sap.portal.pcm.iview.admin.AdminBaseiView.getAttrSetLayersList(AdminBaseiView.java:205)
     at com.sap.portal.pcm.iview.admin.AdminBaseiView.getCustomImplementation(AdminBaseiView.java:148)
     at com.sap.portal.pcm.admin.PcmAdminBase.getImplementation(PcmAdminBase.java:530)
     at com.sapportals.portal.ivs.iviews.IviewServiceObjectFactory.getObjectInstance(IviewServiceObjectFactory.java:448)
     at com.sapportals.portal.prt.jndisupport.DirectoryManager.getObjectInstance(DirectoryManager.java:56)
     at com.sapportals.portal.pcd.gl.JndiProxy.getObjectInstance(JndiProxy.java:47)
     ... 38 more
Can anyone tell me more about the cause this might have? Also, are there any further prerequisites for this iView to work?
Any help will be appreciated and rewarded accordingly.
Regards,
Thomas

hello,
how did you solve it ?
Regards,
Dimitry Haritonov

How to use buttons in hcm process and forms?

Similar Messages

Maybe you are looking for