How to use custom Finish for dependency?
Hi,
in my project hi have tasks with sub-tasks duration depends on the number of pieces.
I have a custom number field for number of pieces and a custom duration field for the duration of the subtask for the single piece.
I then created a custom duration field to calculate the duration of the total time required for the single subtask for the all samples.
Then I created a custom Finish field that uses this formula to calculate when each subtask should finish is ProjDateAdd([Start],[Duration1],[Project Calendar])
The problem I have is that the calendar uses default Duration and Finish to schedule the tasks so Finish is always different from Finish1.
Is there a way to update the default Duration and Finish as function of custom duration and finish?
Michele
michele_1,
Well, no and yes. On the "no" side, there is no way to have custom fields update the built-in fields directly. However, it could be done with some VBA. Actually you could also use paste links but that is highly NOT recommended because you would
set yourself up for high probability of file corruption.
So, if you are willing to use VBA then this simple macro will do it. Note, it assumes the Number1 field is the quantity and the Duration1 field is the time for a quantity of one.
Sub SamplesXDur()
Dim t As Task
For Each t In ActiveProject.Tasks
t.Duration = t.Number1 * t.Duration1
Next t
End Sub
This is a sample file prior to running the macro.
And this is what it looks like after the macro is run.
But just on the side, why do you need a custom finish field, or even a second custom duration field? Given that you know the start date, all you need to set the Duration field, and hence the Finish field, is the result from the custom number field, which
you state is the quantity of pieces, times the time (duration) for a single piece.
Hope this helps.
John
Similar Messages
-
How to use custom calendar for scheduling other than owb's default calendar
Hi All,
Can anyone please tell me, is there any possibility of using a custom calendar in place of owb default calendar calendar during scheduling. Because, in my case, the month start date and end date are not 1st and 31st that changes according to the financial calendar that is defined.
I want to schedule mappings on month end date of financial calendar. How can this be done?
Thanks in advance
JoshnaHi,
The only possibility is to configure more than one schedule using the complex by month, by_ configuration. I don't know if this will work for you. Or you must use another job control system.
Can u just brief how to use it. Any other possible way of achieving my task?
Thanks
Joshna -
How to use custom tags for integrating FCK Editor?
Hi All,
I am looking for the integrating the FCK Editor in my jsp page. any one can please provide the procedure of How to create fckeditor in jsp?
I have the jar file of fck editor but i am confusing while creating the custom tag for that editor.
I want like this:
<FCKeditor:fck ?> like this
Regards,
Sateeshgoogle answers it all..
[http://www.jroller.com/coreteam/entry/using_fckeditor_in_jsp_web]
[http://java.fckeditor.net/properties.html]
[http://java.fckeditor.net/java-core/tagreference.html] -
How to use custom thumbnail for video
Hi guys,
Wonder if there is a way to embed a custom picture file to become the thumbnail of your video but not be part of the video when it's playing.
Just a picture with whatever text you want on it?
thanks.Adobe's dvd maker program Encore allows you to choose a poster frame for their video buttons that display in your Encore menus
maybe that is what you are thinking of?
and yes, I would like to choose the custom thumbnail for video as you too -
How to use Custom Tags for Theme and Base Map Definitions
In Mapviewer documentation I've found the following new feature:
The XML definition of a theme or base map now supports application-specific
attribute tags. You can use the Custom Tags option in the theme definition in Map
Builder to specify tags and their values, which can be interpreted by your application
but are ignored by MapViewer itself.
I'm able to define a custom tag in Mapbuilder, but how can I use it in my Application?
Thanks.As he said, you have to use as Platform service to create adapter in OIM.
tcUserOperationsIntf service = Platform.getService(Thor.API.Operations.tcUserOperationsIntf.class);
HashMap<String,String> searchmap=new HashMap<String,String>();
searchmap.put("Users.User ID", userID);
tcResultSet searchset=service.findAllUsers(searchmap); -
How to use custom function for formatting the Line Chart Axes?
Hi...
I'm using a Line chart who's y axis value range from 0 to 50000. This is a number which it gets from it's dataProvider. I want to format this and show it as
$50,000
$40,000
$30,000
$20,000
$10,000
$0
instead of
50000
40000
30000
20000
10000
0
Here's my linechart code:
<mx:LineChart id="revTimeLineChart"
width="100%" height="100%"
showDataTips="true" >
<mx:horizontalAxis>
<mx:CategoryAxis id="lcCatAxis" categoryField="name"/>
</mx:horizontalAxis>
<mx:series>
<mx:LineSeries id="ls" yField="revenue" displayName="Revenue" showDataEffect="{slideIn}"/> (yField is what I want to format....)
</mx:series>
</mx:LineChart>
Can you please let me know how can this be achieved?
Cheers!
DeepakHi,
You could do something like this,
http://www.codersrevolution.com/index.cfm/2008/10/14/Flex-Charting-Format-your-X-and-Y-Axi s
hope it helps!
Regards ,
Bhavika -
How to export book pdf using custom presets for all book files in indesign using javascript
How to export book pdf using custom presets for all book files in indesign using javascript.
Hi jackkistens,
Try the below js code.
Note: you can change your preset name in below (e.g, Your preset name).
var myBook = app.activeBook;
myBook.exportFile(ExportFormat.PDF_TYPE, File (myBook.filePath+"/"+myBook.name.replace(/\.indb/g, ".pdf")), false, "Your preset name", myBook.bookContents, "Book_PDF", false);
example:
var myBook = app.activeBook;
myBook.exportFile(ExportFormat.PDF_TYPE, File (myBook.filePath+"/"+myBook.name.replace(/\.indb/g, ".pdf")), false, "[High Quality Print]", myBook.bookContents, "Book_PDF", false);
thx,
csm_phil -
When I got into my 'History Setting' and click on 'Use custom settings for history' it doesn't apply. I click on the 'OK' tab and it appears to apply and then closes. When I go back into it, in order to see if it applied, it has reset back to the 'Never Remember History'. How do I fix it?
If "Never Remember History" is displayed then that means that you are in Private Browsing mode and that all other history settings have the default value.
*https://support.mozilla.com/kb/Private+Browsing
If you intend to run Firefox in Private Browsing mode the that is OK.<br />
Otherwise you need to leave mode.
To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Deselect: [ ] "Permanent Private Browsing mode" -
I have to enable cookies in order to have an online purchase credited to my mileage account. So, I opened Firefox Tool and selected Options then Privacy. There, I changed "Remember history" to "Use custom settings for history," as, this will achieve what I am trying to do. However, when I press "OK" the box jumps back to the Privacy box and I see that "Remember history" is still the setting. What steps do I take to prevent the Privacy box from defaulting to "Remember history" when I want to change that setting to something else?
The "Use custom settings for history" selection allows to see the current history and cookie settings, but selecting this doesn't make any changes to history and cookie settings.
Firefox shows "Use custom settings for history" as an indication that at least one of the history and cookie settings is not the default to make you aware that changes were made.
If all History settings are default then the custom settings are hidden and you see "Firefox will: (Never) Remember History".
"Never Remember History" means that Private Browsing is active and "Always use private browsing mode" gets a checkmark.
Do you have a problem with the cookies?
You can inspect and manage permissions for the domain in the currently selected tab via these steps:
*Click the "[[Site Identity Button|Site Identity Button]]" (globe/padlock) on the location/address bar
*Click "More Information" to open "Tools > Page Info" with the Security tab selected
*Go to the Permissions tab (Tools > Page Info > Permissions) to check the permissions for the domain in the currently selected tab
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies" -
How to Created custom report for Ship not Billed (SD/FI)?
Hi all,
I am anticipating to write some abap reports..Here is one of them..
Anyone can help me with writing a Report , how to do 'Custom Report for shipped not Billed(SD/FI)' ..But since I am new to Abap , if you wish to reply, please use a little more detail and simple explanation, step by step so I can understand what is the idea, how it can be acheived...what kind of report should be used , techniques, tables etc...:)
Appreciate your help!
Regards,
BobyHi Boby,
You need to create custom transaction to achive these results.
you will have selection-screen ,it would be :
Date : Here date would be mandatory - Ranges Option
Customer - Optional field - Ranges
Order # Sales Order (Optional) Ranges
Invoice # - Invoice # (Optional) Ranges
You will get the data based on ur selection-screen criteria ...
First you will have customer order details from diffrent table
VBAK,
VBAP,
LIKP
LIPS
VBRK,
VBRP
KNA1,
VBFA Tables ( See the my sample program )
Output would be :
Customer # Custome Name Order # Delivery # Invoice # Netpr, Netquantity ,
Check the condition whether invoice table has VBRK-RFBSK = ''.
See the my sample program : This is sales report by monthly..
REPORT ZFDSALES_REPORT no standard page heading
message-id zwave.
Data Declaration Part
TYPE-POOLS
type-pools : slis.
Tables
tables : VBAK,
VBAP.
Internal table for VBAK Table
data : begin of i_vbak occurs 0,
vbeln like vbak-vbeln,
bstnk like vbak-bstnk,
vdatu like vbak-vdatu,
end of i_vbak.
Internal table for VBAP and MATNR
data : begin of i_vbap occurs 0,
vbeln like vbap-vbeln,
matnr like vbap-matnr,
kdmat like vbap-kdmat,
kwmeng like vbap-kwmeng,
netpr like vbap-netpr,
maktx like makt-maktx,
end of i_vbap.
Internal tables
data : begin of i_sales occurs 0,
vdatu like vbak-vdatu,
bstnk like vbak-bstnk,
matnr like vbap-matnr,
maktx like makt-maktx,
kdmat like vbap-kdmat,
kwmeng like vbap-kwmeng,
netpr like vbap-netpr,
end of i_sales.
Variable for ALV
data : v_repid like sy-repid,
gt_fieldcat type slis_t_fieldcat_alv.
Selection-screen
selection-screen : begin of block blk with frame title text-001.
select-options : s_vbeln for vbak-vbeln,
s_erdat for vbak-erdat,
s_ernam for vbak-ernam,
s_vdatu for vbak-vdatu obligatory,
s_BSTNK for vbak-BSTNK,
s_KUNNR for vbak-kunnr,
s_matnr for vbap-matnr,
s_KDMAT for vbap-KDMAT.
selection-screen : end of block blk.
Initilization
initialization.
v_repid = sy-repid.
S T A R T - O F - S E L E C T I O N ****************
start-of-selection.
Get the data from VBAK and VBAP Tables
perform get_vbak_vbap.
E N D - O F - S E L E C T I O N *****************
end-of-selection.
Display the data
perform dispolay_data.
*& Form get_vbak_vbap
Get the data from VBAK and VBAP Table
FORM get_vbak_vbap.
Get the data from VBAK Table
select vbeln bstnk vdatu from vbak into table i_vbak
where vbeln in s_vbeln
and bstnk in s_bstnk
and vdatu in s_vdatu
and kunnr in s_kunnr
and erdat in s_erdat
and ernam in s_ernam.
if sy-subrc ne 0.
message e000(zwave) with 'No data found for given selection'.
endif.
Get the data from VBAP Table
select avbeln amatnr akdmat akwmeng a~netpr
b~maktx into table i_vbap
from vbap as a inner join makt as b on bmatnr = amatnr
for all entries in i_vbak
where a~vbeln in s_vbeln
and a~kdmat in s_kdmat
and a~abgru = space
and a~matnr in s_matnr
and a~matnr ne '000000000000009999'
and a~matnr ne '000000000000004444'
and a~matnr ne '000000000000008888'
and a~matnr ne '000000000000001111'
and a~werks = '1000'
and b~spras = 'E'
and a~vbeln = i_vbak-vbeln.
if sy-subrc ne 0.
message e000(zwave) with 'No data found for given selection'.
endif.
sort i_vbak by vbeln.
sort i_vbap by vbeln matnr.
loop at i_vbap.
read table i_vbak with key vbeln = i_vbap-vbeln
binary search.
if sy-subrc eq 0.
i_sales-bstnk = i_vbak-bstnk.
i_sales-vdatu = i_vbak-vdatu.
i_sales-matnr = i_vbap-matnr.
i_sales-kdmat = i_vbap-kdmat.
i_sales-maktx = i_vbap-maktx.
i_sales-netpr = i_vbap-netpr.
i_sales-kwmeng = i_vbap-kwmeng.
append i_sales.
else.
continue.
endif.
clear : i_sales,
i_vbap,
i_vbak.
endloop.
sort i_sales by vdatu bstnk matnr.
refresh : i_vbap,
i_vbak.
ENDFORM. " get_vbak_vbap
*& Form dispolay_data
Display the data
FORM dispolay_data.
Fill the Fiedlcat
PERFORM fieldcat_init using gt_fieldcat[].
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = v_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT = gt_fieldcat[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_ADD_FIELDCAT =
IT_HYPERLINK =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IT_EXCEPT_QINFO =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = i_sales
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
ENDFORM. " dispolay_data
*& Form fieldcat_init
text
-->P_GT_FIELDCAT[] text
FORM fieldcat_init USING e01_lt_fieldcat type slis_t_fieldcat_alv.
DATA: LS_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
Delivery Date
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'VDATU'.
LS_FIELDCAT-OUTPUTLEN = 12.
LS_FIELDCAT-TABNAME = 'I_SALES'.
ls_fieldcat-seltext_L = 'Delivery Date'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Purchase Order #Material Description
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'BSTNK'.
LS_FIELDCAT-OUTPUTLEN = 25.
LS_FIELDCAT-TABNAME = 'I_SALES'.
ls_fieldcat-seltext_L = 'Purchase Order #'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Material
CLEAR LS_FIELDCAT.
LS_FIELDCAT-REF_FIELDNAME = 'MATNR'.
LS_FIELDCAT-REF_TABNAME = 'MARA'.
LS_FIELDCAT-FIELDNAME = 'MATNR'.
LS_FIELDCAT-TABNAME = 'I_SALES'.
ls_fieldcat-seltext_L = 'Material #'.
ls_fieldcat-seltext_M = 'Material #'.
ls_fieldcat-seltext_S = 'Material #'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Material Description
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'MAKTX'.
LS_FIELDCAT-OUTPUTLEN = 40.
LS_FIELDCAT-TABNAME = 'I_SALES'.
ls_fieldcat-seltext_L = 'Material Description'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Customer Material #
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'KDMAT'.
LS_FIELDCAT-OUTPUTLEN = 35.
LS_FIELDCAT-TABNAME = 'I_SALES'.
ls_fieldcat-seltext_L = 'Customer material no.'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Quantity
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'KWMENG'.
LS_FIELDCAT-OUTPUTLEN = 15.
LS_FIELDCAT-TABNAME = 'I_SALES'.
ls_fieldcat-seltext_L = 'Quantity'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Net Price
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'NETPR'.
LS_FIELDCAT-OUTPUTLEN = 15.
LS_FIELDCAT-TABNAME = 'I_SALES'.
ls_fieldcat-seltext_L = 'Net Price'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
ENDFORM. " fieldcat_init
Reward Points if it is helpful
Thanks
Seshu -
How to create custom infotype for training and event management
hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzalHi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini -
I know how to manage privacy using the tools tab at the top of the address bar, or so I thought. I want to choose "Never Remember History". When I do that, and click "OK", the next time I check the privacy settings, the history is right back to "Use custom settings for history". I don't want this. Also, I don't want to use autocomplete for forms, but I can't get those settings to stay, either. I basically don't want info. stored on this computer. My system was hacked several months ago, by some joker who named all my system folders a racist slur (I reported it to Norton, and a technician had a look at it). Anyway, I want to keep things as safe as possible. Please allow me to delete all my history when I close Firefox. I don't really like Google, either, because they have a reputation for not respecting people's privacy. I don't like that I didn't have an option to uncheck google's toolbar when I installed Firefox.
Thank you.That is probably OK.<br />
You may have changed one of the other history or cookie settings.
If Firefox shows the "Use custom settings for history" setting then that is an indication that at least one of the history and cookie settings are not the default to make you aware that changes were made. -
How to display custom names for attributes in JSP pages
I would like to use custom names for my attributes in Struts JSP table headers.
For example, if the database table named "Country" has a column CNT_ID and BC4J wizard mapped it into an Entity Object's attribute "CntId" I would like to display it as "Country ID" in my JSP table header.
Now, I suppose the place to try this is probably in DataEditComponent.jsp, DataQueryComponent.jsp etc., and probably has smthg to do with jbo:AttributeIterate, but I still can't figure how to achieve this...
I use JDev 9.0.3Kresimir,
It's not clear from your posting whether you've worked out how to do what you want with control hints, so just in case, here's how:
- In the navigator, select your entity object or your view object
- In the structure pane, double-click the attribute you want to edit (CntId)
- In the attribute editor, select the control hints page
- In the Label Text field, type the text you want to use for your label (Country). Click OK.
Hope this helps
Blaise -
How to find CUSTOMER EXIT for a Standard SAP program
How to find CUSTOMER EXIT for a Standard SAP program
Hi
To introduce the techniques of enhancement in standard SAP system. SAP creates customer exits for specific programs, screens, and menus within standard R/3 applications. These exits do not contain any functionality. Instead, the customer exits act as hooks. You can hang your own add-on functionality onto these hooks.
They do not affect standard SAP source code.
When you add new functionality to your SAP System using SAPs exits, you do not alter the source code of standard SAP programs in any way. The code and screens you create are encapsulated as separate objects. These customer objects are linked to standard applications, but exist separately from SAPs standard software package.
They do not affect software updates.
When you add new functionality to your SAP System using SAPs exits, your objects (called customer objects) must adhere to strict naming conventions. When it comes time to upgrade a to a new software release, customer objects names ensure that they will not be affected by any changes or new additions to the standard software package.
Customer exits are not available for all programs and screens found in the SAP System.
Any change made to an SAP object in a customer system is called a modification. Customers usually modify their systems for one of two reasons. Either they make changes to the SAP standard in order to adjust the R/3 System to their specific business needs (actual modifications), or they alter individual SAP objects in order to correct an error (as recommended in an SAP error note).
You should only modify the SAP standard if the modifications you want to make are absolutely necessary for optimizing work flow in your company. Be aware that good background knowledge of application structure and flow are important prerequisites for deciding what kind of modifications to make and how these modifications should be designed.
SAP application programmers create SAP enhancements in transaction SMOD using function module exits, menu exits, and screen exits.
Customers are given a catalog containing an overview of existing SAP enhancements. They can then combine the SAP enhancements they want into an enhancement project using transaction CMOD.
SAP enhancements are made up of component parts. These components include function module exits, menu exits, and screen exits. A specific component may be used only once in a single SAP enhancement (this guarantees the uniqueness of SAP enhancements).
Customer enhancement projects consist of SAP enhancements. Each individual SAP enhancement may be used only once in a single customer enhancement program (this guarantees the uniqueness of a customer project).
SAP application programmers preplan function module exits, menu exits, and screen exits for their applications and combine them to create useful enhancements for the R/3 System.
Customers create their own enhancement projects for their systems using SAP enhancements. You can customize the individual components of an enhancement project by creating your own include programs (for function module exits), texts (for menu exits), and subscreens (for screen exits). -
HOW TO: using custom fonts in native storyboard views from an ANE on iOS
Hey,
In our apps, we have embedded storyboards into an ANE, and successfully used those screens in an AIR app, and figured out how to use custom fonts in those views.
I wrote a quick blog post about it and just thought I'd share it real quick in case it helps someone.
ANE for iOS with Custom Framework – Using Custom Fonts | khef.coHi WayHsieh,
>>can I just "install" fonts through Word App? Does Word Apps have enough privilege to install fonts on Windows? Can I just click a button in Word App, and then it will install fonts automatically?<<
Based on my understanding, it is hard to achieve the goal. Because the app webpage is hosted inside an Internet Explorer control which, in turn, is hosted inside an app runtime process that provides security and performance isolation and it is under
low-Integrity level.
Here is the figure for apps for Office runtime environment in Windows-based desktop and tablet clients:
You can get more detail about Privacy and security from links below:
Privacy and security for apps for Office
Hope it is helpful.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
The side scroll bar is locked so I can't read anything on the web. Also, I cannot get any video on YouTube, etc. It is a black screen.
-
Would apple replace a logic board for iPhone 5 if still under warranty?
There has been a logic board failure within the iPhone 5, no water damage to it just switched off and never came back on. Once happened to my iPod Touch and i just got a new one (happened within a month of me buying it and i bought it in HMV) The war
-
Lastfmhelper? What is it and why is it always "not responding"?
When ever I pull up Activity Monitor lastfmhelper is always red and not responding. Anyone have any idea what it is and why it's misbehaving? I noticed this because my 10.5.2 iMac Core 2 Due will all of the sudden become unresponsive. When I brought
-
Generating javascript from method ...getting unterminated string literal er
Hello all, I am attempting to generate several links on a jsp that are generated by a method in my class file. Each link has an onmouseover event that will display a popup box that I got from dynamicdrive.com. sb.append("<a href='#' o
-
Error during IDES SAP AFS 6.0 Installation
Folks, I'm installing IDES for the first time and I ran into this issue. The installation starts okay and goes on for a while at the point where it installs the software units it throws an error message: An error occurred while processing service SAP