How to use cyrillic?

Hi!
I live in Portugal and I do graphic work in big group of companies. One of those companies is now working in Bulgaria. In Bulgaria they use the cyrillic characters! My problem is: I have some works to do for them; they are sending me by mail the text they want and I can see them in cyrillic on mail but when I copy/paste them on Freehand MX I can only see some sort of code like •U1077 •U1072. I think this is some sort of unicode "code", but how can I transform this in cyrillic text?

Even if I copy to Textedit, save as rtf and than
import into freehand...
It is probably best to not use rtf at any stage of
the process. That is precisely what converts valid
cyrillic into junk "u" codes. Try setting TextEdit
to Plain Text and UTF-8 encoding, or also Cyrillic
ISO or KOI. What mail program are you using to get
the stuff? In the mail body or via attachment?
I've tried all of that and nothing works! I guess the problem is on the freehand side!
About the program I use to receive mail is the Apple Mail 2 and I'm copying the text from the mail body...
I'm doing a poster in photoshop 7 and I'm able to copy the text from mail to photoshop... but to freehand no!

Similar Messages

  • How Do you use Cyrillic Fonts (Russian) in InDesign CS4 or CS3

    I have a headline in Russian a client sent me in an e-mail that I need to use on a poster I'm laying out in InDesign.
    I downloaded ERUniverse cyrillic font, and when I paste the Russian headline in a text box and go to select ERUniverse cyrillic, there's no Russian!
    Also, I go down to the bottom of my fonts there's Hebrew, Japanesse, Chinese fonts, etc...but no Russian.
    Please help with instructions on how to use a cyrillic font!!!

    I downloaded ERUniverse cyrillic font, and when I paste the Russian headline in a text box and go to select ERUniverse cyrillic, there's no Russian!
    That font must not be Unicode enabled. An old hack to insert Cyrillic characters into a regular font was to replace "unused" characters with Cyrillic ones. So, to type a 'de' д, you would insert the character code for an 'ê'.
    Modern fonts are Unicode enabled, which simply means that in every font Cyrillic characters are found in the same place. Thus, changing the font does not change the text.
    If you are working on Windows, check the Character Map for fonts that support Cyrillic. Select 'Advanced view', Character set: Unicode, Group by: Unicode Subrange. A small window pops up, enumerating all possible Unicode groups. Scroll down and select 'Cyrillic'. Now the character map will only show these characters for each font, so simply scroll through your font list to see which one have them.
    (And OSX no doubt has a similar feature.)
    The older Windows system fonts Times New Roman, Arial, Georgia, Verdana, and the newer ones Calibri, Cambria, and Candara, and lots of the fonts that came with your InDesign installation support Cyrillic (at least Minion Pro and Myriad Pro do).
    It's also possible the original text has not been typed using a Unicode font. If you need a quick check, select some of the text and select the font Arial Unicode (on a Mac, I think "LastResort" will do). If you see useful text, you're okay to go. If not, you have a huge problem. You will have to find the exact font that was used in the original document and use that, or use Find and Replace to change each character to the actual Cyrillic one (and you will need a hardcopy before you can do that).

  • How to use the pps function from JCOP?

    Hi
    I'm trying to use the pps function from JCTerminal (JCOP API: [url http://www.cs.ru.nl/~woj/jcopapi/com/ibm/jc/JCTerminal.html#pps(int, int)]pps function ) to connect my client to a virtual card with a specific protocol (T=0).
    But I always got the error: "Protocol and parameter selection not supported by this terminal!"
    I've tried to make an ATR that support both protocol : [url http://smartcard-atr.appspot.com/parse?ATR=3b909580811fc7dc]3B 90 95 80 81 1F C7 DC.
    I really don't know what value to put in the second parameter (baud rate), I've tried with 150000, which is in the range of the ATR but I'm not sure this is correct. And I could't find any example of it.
    I'm also not sure where to put the pps command, the specification say directly after a reset, so I tried this implementation:
    System.out.print("Start");
              readers = TerminalFactory.getDefault().terminals().list(State.CARD_PRESENT);
              //If no readers has a card it ends the process
              if(readers.isEmpty()){
                   System.out.println("\nNo card in the reader...");
                   return;
              System.out.println("\nReader Type: "+readers.get(0).toString());
              term = (PCSCJCTerminal)JCTerminal.getInstance("PCSC", readers.get(0).toString().substring(15));
              term.open();
              System.out.println("\nTerminal opened");
              //Getting the ATR
              atr = new ATR(term.waitForCard(2000));
              try {
                   term.pps(JCTerminal.PROTOCOL_T0, (int)150000);
              } catch (Exception e) {
                   e.printStackTrace();
              System.out.println("ATR: "+toHex(atr.getBytes()));
              //sending a data 11223344
              System.out.println("\nsending data: 11223344");
              byte[] responsesend = term.send(0,cmdsend,0,cmdsend.length);
              System.out.println("Response data is:" + toHex(responsesend));
              //close terminal
              term.close();
              System.out.println("\nTerminal closed");I've got this output on the console:
    <font size="2">StartReader Type: PC/SC terminal Virtual CAD Reader 0
    Terminal opened
    ATR: 3b 90 95 90 00 81 1f c7 cc
    sending data: 11223344
    <font color="red">Protocol and parameter selection not supported by this terminal!</font>
         at com.ibm.jc.JCTerminal.pps(Unknown Source)
         at com.test.essai.main(essai.java:46)
    </font>>
    And If I take a look at the data exchanged with the card:
    <font size="2">Running in Virtual Card mode...
    ATR: 3B909580811FC7DC
    Waiting for event (power: off, protocol: unknown/undefined)...
    Waiting for event (power: off, protocol: unknown/undefined)...
    Raw event data: 01
    Event: VCAD_EC_POWER_ON (0x01)
    Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_POWER_ON) ATR: 3b909580811fc7dc
    Raw reply data: 003b909580811fc7dc
    Sending reply...
    Waiting for event (power: on, protocol: unknown/undefined)...
    Waiting for event (power: on, protocol: unknown/undefined)...
    Raw event data: 06ff11957b
    Event: VCAD_EC_EXCHANGE_TPDU (0x06) C-TPDU: ff11957b
    Accepting any PPS request parameters: Protocol: t=1; FI=9, DI=5
    Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_EXCHANGE_TPDU) R-TPDU: ff11957b
    Raw reply data: 00ff11957b
    Sending reply...
    </font>>
    This (above) is the PPS command but not from the PPS function, it is always sent with protocol T=1
    <font size="2">Waiting for event (power: on, protocol: t=1)...
    Raw event data: 0501
    Event: VCAD_EC_SET_PROTOCOL (0x05) Protocol: t=1
    Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_SET_PROTOCOL)
    Raw reply data: 00
    Sending reply...
    Waiting for event (power: on, protocol: t=1)...
    Raw event data: 0600c10120e0
    Event: VCAD_EC_EXCHANGE_TPDU (0x06) C-TPDU: 00c10120e0
    Handling protocol-specific command...
    Protocol block:
    NAD: 0x00
    PCB: 0xc1 (T1_S_BLOCK); S-Block type: T1_SBT_IFS_REQ
    LEN: 1
    INF:
    IFS: 20
    EDC: 0xe0
    Changing IFS(other) from 32 to 32
    Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_EXCHANGE_TPDU) R-TPDU: 00e10120c0
    Raw reply data: 0000e10120c0
    Sending reply...
    Waiting for event (power: on, protocol: t=1)...
    Raw event data: 0600001300a404000d54657374436c69656e7441707000f0
    Event: VCAD_EC_EXCHANGE_TPDU (0x06) C-TPDU: 00001300a404000d54657374436c69656e74
    41707000f0
    Processing app. command...
    App. block:
    NAD: 0x00
    PCB: 0x00 (T1_I_BLOCK); Seq. #: 0; More data: 0
    LEN: 13
    INF:
    00a404000d54657374436c69656e7441707000
    EDC: 0xf0
    cmd name: N/A (class #4)
    cmd: 00a40400 0d 54657374436c69656e74417070 70
    Responding with the reversed command data, SW is hardcoded to 90<INS>
    rsp: 707041746e65696c4374736554 90a4
    Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_EXCHANGE_TPDU) R-TPDU: 00000f70704
    1746e65696c437473655490a475
    Raw reply data: 0000000f707041746e65696c437473655490a475
    Sending reply...
    Waiting for event (power: on, protocol: t=1)...
    Raw event data: 060040041122334400
    Event: VCAD_EC_EXCHANGE_TPDU (0x06) C-TPDU: 0040041122334400
    Processing app. command...
    App. block:
    NAD: 0x00
    PCB: 0x40 (T1_I_BLOCK); Seq. #: 1; More data: 0
    LEN: 4
    INF:
    11223344
    EDC: 0x00
    cmd name: N/A (class #1)
    cmd: 11223344
    Responding with the reversed command data, SW is hardcoded to 90<INS>
    rsp: 9022
    Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_EXCHANGE_TPDU) R-TPDU: 0040029022f
    0
    Raw reply data: 000040029022f0
    Sending reply...
    Waiting for event (power: on, protocol: t=1)...
    Raw event data: 03
    Event: VCAD_EC_POWER_OFF (0x03)
    Reply: VCAD_SC_OK (0x00) (in reply to VCAD_EC_POWER_OFF)
    Raw reply data: 00
    Sending reply...
    Waiting for event (power: off, protocol: unknown/undefined)...
    </font>>
    If someone know how to use this function or have any advice to help me to select a specific protocol with Jcop API, please let me know.
    If you you need any more information don't hesitate to ask.
    Best regards
    Edited by: Cyril on Sep 22, 2011 9:54 AM

    -1
    I'm using a virtual terminal (windows driver), and I don't see how I could turn off the Auto-pps. I've also tried with a real reader and a card and I have the same error.
    -2
    I've tried value in the range of the atr (based on this analysis: [url http://smartcard-atr.appspot.com/parse?ATR=3b909580811fc7dc]http://smartcard-atr.appspot.com/parse?ATR=3b909580811fc7dc ). But I don't know if only I value of baud-rate is possible in the range. Anyway I just would like to change the protocol, not the baud-rate.
    -3
    I've already tried to call pps function before, after the first reset, or with another reset later and I always got the same thing.
              term = (PCSCJCTerminal)JCTerminal.getInstance("PCSC", readers.get(0).toString().substring(15));
              term.open();
              System.out.println("\nTerminal opened");
              //Getting the ATR
              atr = new ATR(term.waitForCard(2000));
              System.out.println("ATR: "+toHex(atr.getBytes()));
              jcard = new JCard(term,atr,0);
              jcard.reset();          
              try {
                   term.pps(JCTerminal.PROTOCOL_T0, (int)312500);
              } catch (Exception e) {
                   e.printStackTrace();
              }The same pps is always send after each reset...

  • We would like to use cyrilic language characters in ECC system with custome

    We would like to use cyrilic language characters in ECC system with "customer reserve" language (Z1).
    We have positive experience on  one system for certain business partner in Macedonia (there is no Macedonian language to install as SAP standard) by using "customer reserve" language (Z1).
    Now we are about to introduce other system with same approach. The trouble is that after entering Macedonian language on an cost center with language Z1 on first language  and transfering it via idoc we get hashes("#") instead of characters on second language
    What could be the reason? I suplemented with english (as on the first system where everything is ok)  the "Customer reserve"(Z1)  language normaly(with default settings).
    On first system this was not done by me.
    Should supplementation be done specificly?.(how to find settings for supplemention on first system?)
    Please give me a hint

    Hi,
    To check supplement language go to T-code, SMLT ->Language ->Special actions->Supplementaion
    you can get more information from below SDN thread.
    Cyrilic char not coming properly
    Below SAP help document gives you how to find supplement language & installation of languaes.
    http://help.sap.com/saphelp_nw70/helpdata/en/a3/30ad5296b511d384bb0060975b04f3/content.htm
    Regards
    Nagaraju

  • How to access Cyrillic glyphs from Trajan Pro 3 Regular?

    I can download Trajan Pro3 regular in greek and latin glyphs but not in Cyrillic. Using Mac OS 10.7.5, Font Agent Pro 6.010.
    No EULA Licence Agreement in russian, but Adobe told me I bought the right font (with cyrillic glyphs).

    Thank you a lot.
    The first downloading was not correct. I loaded again, and now it is ok.
    Best regards
    Catherine Anderegg
    Anderegg Graphic
    Le 23 févr. 2015 à 21:10, MiguelSousa a écrit :
    How to access Cyrillic glyphs from Trajan Pro 3 Regular?
    created by MiguelSousa in Adobe Type - View the full discussion
    Yes, the Trajan Pro 3 fonts have Cyrillic glyphs in them. You need to use Unicode-encoded text to get to them.
    Википедия
    Cyrillic script in Unicode
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7222734#7222734 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7222734#7222734
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Adobe Type by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • How to use Outline Load Utility with local encoding names of dimensions?

    Hi,
    I'd like to load metadata (dimensions members) to Planning classic application via Outline Load Utility.
    Target dimension name has been set in local encoding (cyrillic).
    After execution my batch file I get error that unable to find specified load dimension "????" in target application.
    Batch file has been created to start OutlineLoad in ANSI encoding:
    cd C:\Hyperion\products\Planning\bin
    OutlineLoad /A:testapp /U:admin /M /N /I:C:\Hyperion\TempOtlLoad\otl_tmc_alterna.csv /D:{dimNameInCiryllicEncoding} /L:C:/Hyperion/TempOtlLoad/outlineLoad.log /X:C:/Hyperion/TempOtlLoad/outlineLoad.exc
    TIMEOUT 10
    How to use Outline Load Utility with local encoding names of dimensions?

    Has somebody any idea about my question below ?
    Regards,
    Ed

  • How to use one email adress for multiple recipients

    Hello,
    I'd like to know how to use one email adress for multiple recipients. 
    this would be very useful or projects. for example;
    if i send one mail to [email protected], all people in this project get an email.
    I will add the people in this project myself. 
    I know it is possible, but I don't know how to do it ;-)
    please help me! 

    Hope this help.
    _http://technet.microsoft.com/en-us/library/cc164331(v=exchg.65) .aspx

  • Can't figure out how to use home sharing

    Since the latest couple iTunes updates, my family and I can not figure out how to use home sharing. Everyone in our household has their own iTunes, and for a long time we would just share our music through home sharing. But with the updates, so much has changed that we can no longer figure out how to use it.
    I have a lot of purchased albums on another laptop in the house, that im trying to move it all over to my own iTunes, and I have spent a long time searching the internet, and everything. And I just can't figure out how to do it. So.... how does it work now? I would really like to get these albums from my moms iTunes, onto mine. I would hate to have to buy them all over again.
    If anyone is able to help me out here, that would be great! Thanks!

    The problem im having is that after I am in another library through home sharing, I can't figure out how to select an album and import it to my library. They used to have it set up so that you just highlight all of the songs you want, and then all you had to do was click import. Now I don't even see an import button, or anything else like it. So im lost... I don't know if it's something im doing wrong, or if our home sharing system just isn't working properly.
    Thanks for the help.

  • How to use the same POWL query for multiple users

    Hello,
    I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
    "Query 'ABC' is already open in another session."
    where 'ABC' is the query name.
    Can you please tell me how to use the same POWL query for multiple users ?
    A fast reply would be highly appreciated.
    Thanks and Regards,
    Sandhya

    Batch processing usually involves using actions you have recorded.  In Action you can insert Path that can be used during processing documents.  Path have some size so you may want to only process document that have the same size.  Look in the Actions Palette fly-out menu for insert path.  It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

  • How to use airport time capsule with multiple computers?

    I'm sure there are some thread about this but i couldn't find it... so sorry for that but hear me out! =)
    I bought the AirPort Time Capsule to back up my MBP
    And so i did.
    then i thought "let give this one a fresh start" so i erased all of it with the disk utility and re-installed the MBP from the recovery disk.
    I dont want all of the stuff i backed up just a few files and some pictures so i brought that back.. so far so good.
    Now i want to do a new back up of my MBP so i open time machine settings, pick the drive on the time capsule and then "Choose" i wait for the beck up to begin, and then it fails.  It says (sorry for my bad english, im swedish haha) "the mount /Volume/Data-1/StiflersMBP.sparsebundle is already in use for back up.
    this is what i want:
    i want the "StiflersMBP.sparsebundle" to just be so i can get some stuf when i need them. it's never to be erased.
    i want to make a new back up of my MBP as if it's a second computer...
    so guys and girls, what is the easiest and best solution?
    Best regards!

    TM does not work like that.
    If you want files to use later.. do not use TM.
    Or do not use TM to the same location. Plug a USB drive into the computer and use that as the target for the permanent backup.
    Read some details of how TM works so you understand what it will do.
    http://pondini.org/TM/Works.html
    Use a clone or different software for a permanent backup.
    http://pondini.org/TM/Clones.html
    How to use TC
    http://pondini.org/TM/Time_Capsule.html
    This is helpful.. particularly Q3.
    Why you don't want to use TM.
    Q20 here. http://pondini.org/TM/FAQ.html

  • How to use multiple ipods on one account

    I have an Ipod classic and just bought my sons two nano's how do I use these on the same account without changing my account info?

    Take a look here:
    How to use multiple iPods with one computer
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
    Regards.

  • How to use a Table View in AppleScriptObjC

    How can I use a table view and add data to it? And how can I display a button cell and image cell in the table? Thanks.

    Hi all,
    Actually i need some more clarification. How to use the same select statement, if i've to use the tabname in the where clause too?
    for ex : select * from (tab_name) where....?
    Can we do inner join on such select statements? If so how?
    Thanks & Regards,
    Mallik.

  • How to use '|' delimited as seprator in GUI_DOWNLOAD ? Plz suggest me ,,

    how to use '|' delimited as seprator in GUI_DOWNLOAD ? Plz suggest me ,,
    i want the output should be seprated by '|' delimited when i download the file.

    Hi,
    We will pass the seperator to the WRITE_FIELD_SEPARATOR parameter as
    CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
    filename = v_file
    write_field_separator = '|'
    TABLES
    data_tab = itab[] . "Our internal talbe filled with data
    Re: Why Function GUI_DOWNLOAD can create XML file but not a flat file?
    Award points if useful
    Thanks,
    Ravee...

  • ** How to use TO_DATE function in Stored Proc. for JDBC in ABAP-XSL mapping

    Hi friends,
    I use ABAP-XSL mapping to insert records in Oracle table. My Sender is File and receiver is JDBC. We use Oracle 10g database. All fields in table are VARCHAR2 except one field; this is having type 'DATE'.
    I use Stored procedure to update the records in table. I have converted my string into date using the Oracle TO_DATE function. But, when I use this format, it throws an error in the Receiver CC. (But, the message is processed successfully in SXMB_MONI).
    The input format I formed like below:
    <X_EMP_START_DT hasQuot="No" isInput="1" type="DATE">
    Value in Payload is like below.
    <X_EMP_START_DT hasQuot="No" isInput="1" type="DATE">TO_DATE('18-11-1991','DD-MM-YYYY')</X_EMP_START_DT>
    Error in CC comes as below:
    Error processing request in sax parser: Error when executing statement for table/stored proc. 'SP_EMP_DETAILS' (structure 'STATEMENT'): java.lang.NumberFormatException: For input string: "TO_DATE('18"
    Friends, I have tried, but unable to find the correct solution to insert.
    Kindly help me to solve this issue.
    Kind Regards,
    Jegathees P.
    (But, the same is working fine if we use direct method in ABAP-XSL ie. not thru Stored Procedure)

    Hi Sinha,
    Thanks for your reply.
    I used the syntax
    <xsl:call-template name="date:format-date">
       <xsl:with-param name="date-time" select="string" />
       <xsl:with-param name="pattern" select="string" />
    </xsl:call-template>
    in my Abap XSL.  But, its not working correctly. The problem is 'href' function to import "date.xsl" in my XSLT is not able to do that. The system throws an error. Moreover, it is not able to write the command 'extension-element-prefixes' in my <xsl:stylesheet namespace>
    May be I am not able to understand how to use this.
    Anyway, I solved this problem by handling date conversion inside Oracle Stored Procedure. Now, its working fine.
    Thank you.

  • Sender Mail Adapter - S/MIME - How to use it?

    Hi guys,
    I am trying to figure out how to use the S/MIME security parameter of the Sender Mail Adapter in PI 7.1.
    Could anyone point me to some useful documentation/examples/blogs ?
    Or perhaps explain what steps are involved when configuring this parameter?
    We are pulling emails from an Microsoft Exchange server.
    Many thanks,
    Aldo

    First of all one sender mail adapter has to be tight with a specific sender email address.
    The email has to be decrypted as whole, you cannot decrypt parts of it.
    Then you store certificates to secure store in J2EE server and point to it in send agreement, this should be equal to HTTPS setup
    Check security guide:
    http://help.sap.com/saphelp_nwpi71/helpdata/EN/f7/c2953fc405330ee10000000a114084/frameset.htm

Maybe you are looking for

  • How to change scrollbar's color in combobox?

    Hi, I changed the combobox's background color to black. But since the little arrow in the scrollbar on the right side of the combobox is black, this makes the arrow vanish. I couldn't find any method in API that can change the color of the arrow/scro

  • Export all the reports currently stored in CMC

    Our company's internal security policy prohibits us from connecting anyone's copy of Crystal XI to our production report repository (in CMC). We have to work on reports locally and republish them fresh in the CMC every time a report is changed. We're

  • CRM webUI not login intp EPR system

    Dear expert when use WebUI and through this try to login in ECC system I can not login into ecc server ,after searching documents found that  required SSO ( single Sing On ) between both server, How can I create SSO please guide also note that our bo

  • .mov files displaying choppy/glitchy

    Hi, I am having some trouble reviewing some clips in Premiere. The footage I was given has some 29 fps .mts files and some 60 fps .mov files (they were shot on different cameras). The .mts files look fine when I review them but when I play the .mov f

  • Weblogic6.1 SP2 with SUN OS 5.7

              We are having problem in displaying chinese / korean /thai characters display in           Weblogic6.1 SP2 with SUNOS 5.7 combination. It shows junk characters only.           However, we dont have any problem of showing chinese / korean /