How to use Final Cut Pro
How do you use Final Cut Pro which I might start using on my Mac Mini
Step 1: Read through the manual/help files. Pay particular attention to system requirements and set up.
Step 2: Install the application.
Step 3: Do some tutorials.
Step 4: Refer to the manual/help files when you run into questions while working on the tutorials.
Step 5: Capture or import footage into your first real project.
Step 6: Use what you learned from the manual/help files and tutorials to edit your video.
-DH
Similar Messages
-
How to use Final Cut Pro with multiple user accounts?
Hi,
I want to use Final Cut Pro on a clean user account. How do I set it up? How can I access my old FCP library and still work on it from multiple users?
Also, I want my DropBox account to back-up my media. Any tips?I use external drives as backup. But I don't trust them. And in case of fire or what ever...It is of no use...
But I agree on your comment about DropBox. It would have been the perfect solution though.
What else is there?
I have a 2TB HD but these projects are huge and still growing - so I have to move my projects to several external drives. So maybe I should just work directly from external drives and skip the partition of the computers main drive? I am thinking of the disadvantage of reducing the total storage of the disk. -
How to use Final Cut pro with external hard drive?
I have too little space on my computer so I have to use final cut pro x with an external hard drive, but whenever I have the hard drive plugged in and Final cut going, my computer goes very slow. I just upgraded to 16gb ram... but can't seem to run FCP x while an external hard drive is plugged in. FCP just freezes up and I have to force quit.
craigbuckley wrote:
all the files and events in final cut are still on my internal, so my internal drive is still full.... Do I have to go and delete everything off my internal?
In addition to the excellent advice to keep your media on an external HDD, you need to make sure that your system (boot) drive has a decent amount of free space if you want to have a satisfactory editing experience. Many people recommend not going below 20% free space. That's especially so for the boot drive, but as you fill up the external, its performance will also slow. Ideally, we would have separate media and backup drives,
You don't need to "delete everything". Rather, you first figure out what needs to be moved. You copy those files to the other drive and then verify that all the files you copied are in two locations. At that point you can delete those files from your boot drive.
Good luck.
Russ -
How do you mark a section from the timeline to send to Compressor 4 using Final Cut Pro X?
I am trying to send just a certain piece from the Timeline to Compressor 4 using Final Cut Pro X and I can't figure it out. Please help!
jakelovesanna wrote:
The video itself is intirely 5 minutes, but the timeline goes to 24 hrs.
24 hours?
If you select the timeline and press Shift+Z do you see a lot of black space in the timeline? If so, you may have a huge gap clip (although I fail to understand how you achieved it). Click on it and if it can be selected, delete it with the Backspace Key (next to the = key).
Then press Shift+Z again.
If I've got this wrong, can you post a screen grab of your timeline?
Andy -
i am using final cut pro x. i have imported some images and video in my timeline. when i play back my video it looks fuzzy. but, when i pause it, it looks clear again. how do i get my video to play clear and not fuzzy?
Same reply.
-
I am making a graduation video for my cousin using Final Cut Pro. I have photos layered over videos, and I was wanted to find out how you can add a border around the photos so they stand off of the video. Anyone know what I could do?
You would need an image editor to edit the images and add a border to the image first before importing them into Final Cut.
Cheapest and very good image editor?
PIxelmator.
Located in the Mac App Store. $14.99 USD.
Here is the Pixelmator website to give you an overview of the app.
http://www.pixelmator.com/
Good Luck! -
I had downloaded and used Final Cut Pro 7 (studio 3) on my mac, but it died. Can I download it to my new computer without buying a new copy? I'm not sure of the number of installations for academic copies. How would I do this?
AH...good.
There is no limit on the times you can install it from the DVDs. There's just a limit as to being able to run it on multiple machines AT THE SAME TIME. If your old computer dies, or you sell it (please reformat the drive so they don't get FCP for free), then you can install on a new computer fine. And you are allowed to install on (1) desktop and (1) laptop at the same time as well...but only use it on one machine at any given time. Meaning you can use it on the desktop at work, and then when away from the office, on your laptop.
Long story short...you can install it fine without any issues. -
I need to burn a Final Cut Pro project onto a DVD. I watched a tutorial but they were using Final cut Pro 10. How do I burn a project just using Final Cut Pro? and can I go through IDVD? ( oh and how can I finalize the project?) Thanks!
I did that already it it only burned one section of the project. How do I export a master file? Can i just save it on the computer then take it to IDVD? Thank you so much for helping me!
-
How do i burn a dvd using final cut pro x
how do i burn a dvd using final cut pro x?
Use the Share button at the far right end of the Toolbar or File>Share>DVD.
-
I'm going to save my old Hi8 tapes on a hard disk using final cut pro x, to save it for the future. But how shall I export it, and in what will be the best quality to save it in?
Hi Carsten...good luck with your project.. I had just about as many Video8 & Hi8 tapes as
you that I digitized and eventually brought into FCPX..took me many months not weeks
to do so,BTW, as each tape was 60-90 minutes in lenght...and many hundreds of
gigab ytes of storage ( uncompressed AVI files)..it's tedious work unless you plan to farm
it out to a processing house...also regarding eventual storage format...remember
Hi8 is 400 lines or about 540X480 in todays resoultion metrics..you can't make hi-def out
of source that starts out as 400 lines...in my case I rewrapped the avi files into .mov
containers and imported the mov files into FCPX where I got rid of the hundreds of
minutes of Colorado mountain landscapes to get to that one minute shot of the kids
on horseback ( late 80's for most of my archives)..so its a job..scouring thru 30X90 min
of source to not miss those precious memories takes diligence and hard work but its worth
it; eventually I encode the uncompressed video I want to save in H.264 format Staandard
Def not HiDef -
When starting Final Cut Pro 7.0.3 I am all of a sudden getting a message that says "One or more of the scratch disks don't have read/ write access" and now the app won't operate - how do I fix this so I can use Final Cut Pro?
Glad you found the answer. But something seems wrong. FCP should be able to assign the scratch disk to your startup drive. It's not advisable, but it should be possible. You might want to try and figure out what's going on before what ever's going on cause other problems.
-
I use Final Cut Pro X to make YouTube videos. The sound is great when I watch the videos on certain computers, but muffled on others. How do I fix this?
You don't. You can't control how other computers or browsers play back the footage. The best you can do is export a master file that plays great on your computer. What youTube does with it, or how other computers play it back is out of your hands.
Just like me with broadcast TV shows. I deliver the most pristine version I can to the network. But then they convert it to a digital file that they then beam out to cable and satellite providers, who then compress it again to play on their systems. And then it arrives at grandma's house and plays on her TV. I have no control how my grandma receives the signal, nor how her TV is set up. Unless I am nice and tweak things when I go visit. But I can't do this at every house that might want to watch my show. -
how do i engage my 8 core mac pro to use all it's cores when using final cut pro and other applications that need processing power? at the moment they seem to be idle...
First, did you use Setup or Migration Assistant? That can happen when coming from a PowerMac or sometimes even from another (Intel) Mac.
Second, wait for the next version of Final Cut due very soon to ship (may have to wait for the ".1" of course to clean up any early issues.
Final Cut Pro - Wikipedia
There are a few apps that are better. I think you can run multiple instances of Handbrake for one.
I've read about and wanted to try PowerDirector 9 (Windows)
PowerDirector 9 video software
video editing software Wiki -
Comparing video quality of AVCHD BluRay discs using Final Cut Pro Share vs Compressor
Up front, I will admit to being a newbie when it comes to using Final Cut Studio 3 and would appreciate some feedback from the Apple forum experts.
I have spent a lot of time trying to determine how to achieve an optimum group of Compressor 3.5.2 settings so that the playback video quality of an AVCHD BluRay disc is equal to or better than one created by using the simpler auto settings of FCPro Share, version 7.0.2.
When using Compressor’s auto/default maximum settings, I experienced the same error message reported in:
Error MessageDuring Creation of Blu-ray Disc in FCP and Compressor 3.5
https://discussions.apple.com/message/12073794#12073794
I have since made some Compressor AVCHD Discs with smaller bit rate settings and compared video quality with a single FCP Share AVCHD disc. Both seem to be equal in providing a very good video when viewed on my new Panasonic DMP BDT 310 BluRay player. However, the Compressor AVCHD discs show some motion artifacts not present with the FCPro Share version, especially when scrolling text or when objects are moving through the field of view, and visible artifacts are seen from a stationary chain link fence and other lattice work in the background of the video sample.
My sample video used for the comparisons between Compressor and FCP Share discs is a 21 minute duration home movie, originally captured from a mini DV, Canon HV30 1080i camcorder using ProRes HQ encoding(1440x1080), and dragged into FC Pro 7.0.2 timeline where 10 chapter markers have been inserted.
To create an AVCHD disc using FCPro Share, Markers are used to set the IN and OUT points, Select IN to OUT from the timeline, pull down File Menu Share, Select Create BluRay from options in pop out Share pane, and designate output device along with picture files for Background, Logo, and Title options. When these are completed, click on Export. My 21-minute video required almost two hours for encoding including about 10 minutes for burning. This accomplished on an iMac 3.06 GHz Intel Core 2 Duo.
To prepare this same 21-minute video for use with Compressor, I again Select IN to Out from the FCPro timeline, but this time use File Export as a QuickTime Self Contained movie including Chapter markers. Then Open Compressor, choose Create BluRay from Template pane, right click on the down arrow in the Batch window and load the QT self contained movie file. From there I went to the Inspector window and tried various combinations of bit rate settings along with Frame Encoder options such as Better or Best motion parameter controls.
I have tried the following combinations of Bit rate settings along with varying Frame Encoder controls and burned an AVCHD disc for each example:
Example A
Compressor set to 6 Mbps Average and 8Mbps Maximum, Frame Encoder settings OFF. Approximately 4 hours to encode although the time remaining estimator indicated a larger value of ~7 hours; not an accurate estimator at all.
Example B
Compressor set to 6 Mbps Average and 8Mbps Maximum, Frame Encoder settings ON, using “Better (Linear Filter) and Better (Motionadaptive)” settings. Approximately 4 hours to encode, not the 13 hours that were estimated.
Conclusion: Comparing A & B Compressor versions, Disc B showed some improvements in reducing motion artifacts over Disc A.
Example C
Compressor set to 13 Mbps Average and 15 Mbps Maximum, Frame Encoder settings ON, using “Better (Linear Filter) and Better (Motion adaptive)” settings. Multipass checked. DeInterlace was checked. Unknown hours to encode; about 8 hours done overnight..
Conclusion: Disc C showed some minor improvements reducing motion artifacts over Disc B
Example D
Compressor Auto settings,i.e., 15 Mbps Average and 17 Mbps Maximum, Frame Encoder settings ON, using “Better (Linear Filter) and Better (Motion adaptive)” settings. Multipass checked. Approximately 12 hours to encode, done overnight. Inserted disc next morning after the overnight encoding was completed, and a few minutes later an error message pane appeared that the maximum bit rate had been exceeded. This message was consistent with the Apple posted thread referenced above. Unfortunately the long overnight encoding was wasted.
It seemed to me that the best Compressor settings for suppressing the motion artifacts were displayed by the disc burned in Example C, i.e., 13/15 Ave/Max Mbps with“Better” Motion settings in the Frame Encoder.
However, when this disc was compared to the AVCHD Disc burned using the FCPro Share, the latter still seemed much better. I do not know what the auto bit rate values are as set in FC Pro, but for me, the quality is quite good AND the motion artifacts are significantly reduced, especially evident with the scrolling text.
Sorry about this long post, but I thought the detail would be necessary for the experts, and maybe helpful to others trying to get started in this BluRay arena. Did I misuse Compressor? I think the sample video exported as a self contained QT movie was the right thing to do? Not sure where I went wrong.
Thanks in advance for Feedback and Recommendations. For now, I’m going to stay with the simpler process using Final Cut Pro Share function.
BoBoThank You, Brad, for responding; glad to hear I'm not the only one having similar Compressor issues.
You may have hit on something. Perhaps Compressor's use of H.264 encoding was the reason for my motion artifacts? And perhaps Final Cut Pro Share retains the 1440x1080 quality as it burns the AVCHD BluRay disc?
I had Toast 10 for less than 30 days a couple of years ago, and was lucky to get a refund.
What version of Toast do you have? Wondering if new Toast 11 has improved previous bugs, especially upgrading its Chapter text, pictures, music. I would go back to Toast if it came close to mirroring DVD Studio Pro, or even iDVD capabilities.
Thanks,
BoBo -
How to save Final Cut Pro project to an ftp server to then open on a different computer
Hello, I work for a graphic design firm that also does video production for businesses. We are using Final Cut Pro X in our office which has an FTP server connected to all office computers.
What we want is to be able to have on employee start a project in Final Cut Pro X, save it to the server; then have another employee open up the same project and continue working from a different computer.
Right now, we have a lot of our Final Cut files saved to the server, and the files will show up in the server on the other employee's machine. BUT, we scroll in the server to the file for the Final Cut Pro project on the other computer, and the file is grayed out, unable to be opened on the new computer.
I've tried right clicking and choosing "open with Final Cut" and Final Cut does then open, but right before it opens the project within Final Cut, a message comes up saying "The document could not be opened. Open documents from within Final Cut Pro," which of course, I see no way to do that from within Final Cut Pro.
I've also called Apple Care, they reminded me that we can't have one project open on two computers at the same time, and that's fine. We are willing to close the project on computer one to then open on computer two.
If you have an answer let me know. We don't want to have to load onto an external hard drive to then load onto the other machine, especially since we have a server ready to go.
Thanks for your help.You can share projects via the ftp server, but you need to:
1) Have all the media in identical events on each editor's machine;
2) Set up the project and share the entire folder for that project first;
3) Afterwards, you can share just the project file itself
You CANNOT work directly on projects and events stored in the ftp server.
See Steve Martin explain how to do all this: http://www.youtube.com/watch?v=Hu-ga7fxKh8
Maybe you are looking for
-
Issues using msi files packaged by Creative Cloud Packager.
But when I try installing the products by doublecklicking the msi file, it doesn't install. It will only install if I doubleclick on the Setup file. And since I can't find a sillent install command line for that, and need to package this for use from
-
Fixed rate for currency not fixed in the PO
Hi, In me21N, when we create an order for a different currency than the company currency, the defaut rate appears in the header. This is normal. There is a possibility to fix the rate (the box to tick just next to the rate) : in this case, the same r
-
T.code KKRS - target data missing in reports - t.code KKSB
Hi Gurus, when i am extracting the product hierarchy reports using the t.code KKRS. I am unable to see target data in year 2012 report only. But for year 2011, i am able to see both the target data and actual data. In 2012 i am able to see only actua
-
Good morning, my Shockwave movie downloads a "jpg" into dswmedia folder and then imports this downloaded image into a castmember for Sprite(5). It displays perfectly in Windows (both XP and Vista) but the image does not display in sprite(5) on the ma
-
How do you make a gradient like this
Is it a linear, radial, angle, etc? Tried a few things but nothing is working to match it yet. Thanks.