How to use forms trace file for performance tuning

I am trying to use forms trace file in order to find cause of forms application performance problem.
I have read the document B14032-03 where is described how to turn on tracing and how to convert binary trace file to xml or html format. However these xml/html files are useless because they only contain series of forms events, without possibility for grouping or sorting. Actually, they are like to database raw trace file. I need some tool, like tkprof for database trace, that will process xml/html file and generate some more useful format.
Further, I have tried to load forms trace file into relational database tables in order to use SQL for performance problem investigation. I have followed procedure described in document A92175-01, but without success.
Is there any way to process xml/html file with grouping, orderering or summing event duration or way to load either binary, xml or html trace file into structured data in database.

Al-Salamu Alikum user630033
It's not : elegant at all to thank people 4 No help,it's not their problem that u don't search enough, or u don't have access to db.
We should always say thank ,or 'Jazak Allah Khiern' on both cases even they could or couldn't help u.
Finally,i expect ' an appologize or even a thankful word ' and the kindness i am sure u had to publish the solution u found in order to share it with people who had same problem or at least to give them the info to get the appreciation or the thanksful word u deserve.
Rem.Never give a bad feedback to people who tried to help u.
Regards,
Abdetu..

Similar Messages

How to generate the trace files for remote db link session's?

User are complaining, the db link queries are performing slowness..
how to enable the sql trace session for db link's in remote database...
Is there any way to enable sqltrace for the dblink session ?
if not how to enable the sql trace for entire database level, rather than session based...

An explain plan of the SQL being ran on the local database will review the SQL being passed to the remote db. You can then explain that SQL on the remote db.
I have had to tune a few distribued queries so more than likely the explain plan alone will be enough to allow you to tune the query to improve performance. If not then you can go to the trouble of trying to set up dual traces.
HTH -- Mark D Powell --

HOw to create a Batch file for java application and whats the use of this ?

HI,
How to create a Batch file for java application ?
And whats the use of creating batch file ?
Thanks in advance

First of all, you're OT.
Second, you can find this everywhere in the net.
If you got a manifest declaring main class (an classpath if needed), just create a file named whatever.bat, within same directory of jar file, containing:
javaw -jar ./WhateverTheNameOfYourJarIs.jar %*By the way, assuming a Windows OS, you can just double click the jar file (no batch is needed).
Otherwise use:
javaw -cp listOfJarsAndDirectoriesSeparedBySemiColon country/company/application/package/className %*Where 'country/company/application/package/' just stands for a package path using '/' as separator instead of '.'
Don't specify the .class extension.
Javaw only works on Windows (you asked for batch, I assumed .BAT, no .sh), in Linux please use java.exe (path may be needed, Windows doesn't need it 'cause java's executables are copied to system32 folder in order to be always available, see PATH environment variable if you don't know what I'm talking about) and use ':' as classpath (cp) separator.
The '%***' tail is there in order to pass all parameters, it only works on Windows, refer to your shell docs for other OSs (something like $* may work).
This way you have a command you can call to launch your code (instead of opening NetBeans just to see your app working). You could schedule tasks on it or just call it in any command prompt (hope you know what it is 'cause there have been people in this very same forum with no clue about it, if not just hold the 'Windows button' and press 'R', then type 'cmd' and run it).
Finally add dukes and give 'hem away.
Bye.

Using Digital Personnel File for HCM Forms & Processes

Hi,
We would like to use Digital Personnel File for HCM Forms & Processes to save forms and attachments using record case management. For this to be done record case management needs to be customized. Can you provide the steps for record case management customization and integrating digital personnel files with HCM forms.
Regards,
Amit

http://help.sap.com/erp2005_ehp_03/helpdata/en/43/1d63953fce3566e10000000a11466f/frameset.htm
Refer here

How to modify & use Printer Defination files for Character Mode Report

How can use & modify printer defination files for changing formats & orientation in character mode report. I donot know how to use printer defination files I tried to set the system parameter (Desformat) but it doesn't work.

I m also faced same problem that u face,
If u want to make character mode report so plz follow these instructions:
1. Set the properties of Report Name Node in Character Cell is Yes.
2. Change the mode of the System Parameter Mode is Character.
3. Goto the Layout---> Main Section Properties and set the Character Report Width and Height like 132 and 66
4. Create Formula Column and write this code "RETURN(CHR(14));"
5. Goto Layout Model and map this formula column into Header of the Body Like If ur Company Name is "ABC COMPANY" attached with field and map Formula Column.
5. Goto Printer Definition File DFLT.prt open in NotePad and set width and hieght that u set in Main Section of Report.
6. At Last u Run the Report with Some System Parameter or User Parameter and View as Character Mode Report.
In My Case I used EPSON LQ2180 Printer
So, U Ask More Qustion and u have more knowledge About character mode report Plz Mail me at this address.
Shahid Shafi
[email protected]

When we use XML,XSD,WSDL files to create SOA webservices in jdeveloper ,what will happen means internally,how will useful xml ,xsd,wsdl for composite ?

When we use XML,XSD,WSDL files to create SOA webservices in jdeveloper ,what will happen means internally,how will useful xml ,xsd,wsdl for composite ?
How xml will send message to XSD then how wsdl interaction then to composite ?

XSD (XML Schema Definition), is an abstract representation of a XML characteristics.
The WSDL (Web Services Description Language), describes the functionality offered by your web service.
You can say what operations your services offers, and describe the messages used for this operations in your XSD.

How to use transaction SOST & SCOT for checking Email performance ?

How to use transaction SOST & SCOT for checking Email performance ?
what exactly as CRM Functional we have to do in above transaction .
Please guide me . what is significance of these transaction ?
Regards,
Anup Reche

Hi Anup,
Transaction SOST is used to view the status of the sent mails from SAP.
You cna filter the mails sent by a particular user, on a specified date range and time.
You can list the mails in the status Waiting, Error, Sent or Transmitted.
You can also go to the log of the mail and see its details and can also open the mail sent by the user.
You can add the filters as per your requirement.
Transaction SCOT is SAP Connect used to make connections from SAP to external applications.
You cna configure sending of external mails in SCOT by specifying the SMTP host and port to be used.
Hope this gives you a basic idea of the 2 transactions.
Regards,
Saumya

How to monitor user logs,security logs,trace file,and performance monitori

Hi guys,
pls tel me how to monitor user logs,security logs,trace file,and performance monitoring.
thanks
regards
kamal

Hi,
you can have a look in the Netweaver administration :
http://<portal>:<port>/nwa
Go to monitoring, Java system reports, etc..., you will find what you want.
Fabien.

How to read a trace file?

Can someone point me to a good resource where I can learn how to read a trace file? I have read somewhere that TKPROF can leave some things unattended. Worse, it reports things incorrectly.

I usually recommend use Trace Analyzer (TRCA), Note:224270.1
It includes all the details found on TKPROF, plus additional information normally requested and used for a transaction performance analysis. Generated report is more readable and extensive than text format used on prior version of this tool and on current TKPROF.

How to use multiple video files??

hi all,
i am using flex 4 ...
now i have designed video player..
i used single flv file for execution..
how to use more flv files in tis program???
i have included program also..
can any one reply for this...
thanks in advance...
regards,
saran r
video.mxml:
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
               xmlns:s="library://ns.adobe.com/flex/spark"
               xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600" creationComplete="init()" height="700" >
    <fx:Declarations>
        
    </fx:Declarations>
    <fx:Script>
        <![CDATA[
            import mx.core.UIComponent;
            import flash.events.NetStatusEvent;
            import flash.media.Video;
            import flash.net.NetConnection;
            import flash.net.NetStream;
            private var nc:NetConnection;
            private var stream:NetStream;
            public var videoDuration:Number;
            public var nsClient:Object = new Object();
            private var videoComp:Video = new Video();
            private var meta:Object = new Object();
            private var timer:Timer = new Timer(100);
            private var uiComp:UIComponent = new UIComponent();
            private function init():void
                nc = new NetConnection();
                nc.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
                nc.connect("rtmp://localhost/saran");
                this.addElement(uiComp);
                uiComp.addChild(videoComp);
                timer.addEventListener(TimerEvent.TIMER,timerHandler);
                timer.start();
            private function netStatusHandler(event:NetStatusEvent):void
                trace("Code ===>>>    "+event.info.code);
                if(event.info.code == "NetConnection.Connect.Success")
                    connectStream(nc);
            private function connectStream(nc:NetConnection):void {
                stream = new NetStream(nc);
                videoComp.attachNetStream(stream);
                stream.play("Terminator")
                // stream.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
                stream.client = nsClient//new CustomClient();
                nsClient.onMetaData = metadataHandler;
                trace("stream ===>>>    "+stream.currentFPS);
                //responder = new Responder(onResult);
                // nc.call("getStreamLength", responder, "bikes" );
            private function metadataHandler(metadataObj:Object):void
                meta = metadataObj;
                videoComp.width = metadataObj.width;
                videoComp.height = metadataObj.height;
                //positionBar.move(videoComp.x, ((videoComp.y + videoComp.height)+20));
                //positionBar.width = videoComp.width;
                trace("Duration ====>>>>   "+meta.duration);
            private function timerHandler(event:TimerEvent):void
                //trace("Timer called.........."+stream.time);
                //positionBar.setProgress(stream.time, meta.duration);
        ]]>
    </fx:Script>
</s:Application>

I have the same question but I am using two pc's

Generating Trace file for ODI Sessions

ODI Gurus
am new to ODI, for one of our integration project am using ODI for transforming data from Source to Target Instance.
Oracle Database is installed on both Source and Target instances. Is there a way to generate Database Trace files for ODI sessions triggered.
If yes can you provide the steps to enable/disable database trace for ODI sessions.
Regards
Uma Shankar

Hi Uma Shankar,
My assumptions:
1.) You want to selectively enable Oracle tracing when only the ODI scenarios are executed and not otherwise.
If that is the case then you will have to add some external steps comprising of OS commands and variables that will control if those steps are to be executed or not. These steps will invoke the OS commands to start Oracle tracing.
2.) You know the steps to create a package and know how to use Interfaces and other ODI utilities in the flow of the package.
3.) You know how to create and execute scenarios
Steps to Selectively enable tracing.
1.) Add a variable named V_START_TRACE to the package. This variable will be passed a value from scenario which will determine if you want to enable to trace or not. This variable type is EVALUATE and can have 2 values - TRUE or FALSE. You will have to check for the condition and depending on the condition you will take a path forward.
2.) Add 2 OS commands to the package - OS_START_TRACE and OS_END_TRACE
3.) Create 2 shell scripts (or bat files) - odi_start_trace.sh and odi_end_trace.sh with the following commands:
odi_start_trace.sh :-
sqlplus session - ALTER SYSTEM SET trace_enabled = TRUE;
odi_end_trace.sh :-
sqlplus session - ALTER SYSTEM SET trace_enabled = FALSE;
You need to invoke SQLPLUS sessions from the above shell scripts to enable/disable the oracle level tracing.
4.) Add the above shell scripts to the OS commands created in Step 2.
5.) Join the steps in the following order in the package :
V_START_TRACE (OK) ->OS_START_TRACE (OK) -> <<+Your Actual Integration Code+>>(OK) -> OS_END_TRACE
V_START_TRACE (KO) -> <<+Your Actual Integration Code+>>(OK)
The above KO variable statement doesnt start the trace if the evaluated value doesnt = TRUE. So this will let you do a selective trace.
6.) Create the scenario from the package and execute the scenario by passing it a value "TRUE" for variable V_START_TRACE.
Check the startscen.sh syntax, something like:
*>startscen.sh ... "GLOBAL.V_START_TRACE=TRUE"*
The above is a general solution for enabling trace for any RDBMS
If you need any more information, feel free to ping back.

Generate trace file for a certain transaction

Experts,
I am trying to generate a trace file for a certain transaction for a period of time.
I used tx st03 > transaction profile > double click on transaction and am able to get a list for the day. How do I set the date to generate for the month for example?
Thanks,
Iqbal

Since you post the question in security forum, not peformance or platform forum, I guess are looking for system auditing function.
then SM19/SM20 might be the choice, you can read through
http://help.sap.com/saphelp_nw70/helpdata/EN/c7/69bcb7f36611d3a6510000e835363f/frameset.htm

Generate trace file for a certain transaction by dates

Experts,
I am trying to generate a trace file for a certain transaction for a period of time.
I used tx st03 > transaction profile > double click on transaction and am able to get a list for the day. How do I set the date to generate for the month for example?
Thanks,
Iqbal

Hi Iqbal,
In Tr. ST03 itself, you have three ranges. Day, Week and Month.
Just select the month. Expand it. Select which month you want.
Then check Transaction Profile. It should give you the details for the whole month.
Cheers....,
Raghu

How to use the different class for each screen as well as function.

Hi Experts,
How to use the different class for each screen as well as function.
With BestRegards,
M.Thippa Reddy.

Hi ThippaReddy,
see this sample code
Public Class ClsMenInBlack
#Region "Declarations"
    'Class objects
    'UI and Di objects
    Dim objForm As SAPbouiCOM.Form
    'Variables
    Dim strQuery As String
#End Region
#Region "Methods"
    Private Function GeRate() As Double
            Return Double
    End Function
#End Region
Public Sub SBO_Appln_MenuEvent(ByRef pVal As SAPbouiCOM.MenuEvent, ByRef BubbleEvent As Boolean)
        If pVal.BeforeAction = True Then
            If pVal.MenuUID = "ENV_Menu_MIB" Then
            End If
        Else ' Before Action False
            End If
    End Sub
#End Region
End Class
End Class
Rgds
Micheal
Vasu Anna Regional Feeling a???? Just Kidding
Edited by: micheal willis on Jul 27, 2009 5:49 PM
Edited by: micheal willis on Jul 27, 2009 5:50 PM

How to create different log files for each of web applications deployed in OC4J

Hi All,
I am using OC4J(from Oracle) v1.0.2.2 and Windows2000. Now I want to know
1. how to create different log files for each of my deployed web applications ?
2. what are the advantages in running multiple instances of oc4j and in what case we should run
multiple instances of OC4J ?
3. how to run OC4J as Windows2000 Service rather than Windows2000 Application ?
Thanks and Regards,
Kumar.

Hi Avi,
First of all I have given a first reading to log4j and I think there will some more easy way of logging debugging messages than log4j (If you could provide me a detailed explanation of a servlet,jsp,java bean that uses log4j and how to use log4j then it will be very helpful for me). The other easy ways (if I am not using log4j) to my problem i.e creating different log files for each of web applications deployed in oc4j are
I have created multiple instances of OC4J that are configured to run on different ports and so on each instance I have deployed a single web application . And I started the 2 oc4j instances by transferring thier error/log messages to a file. And the other way is ..
I have download from jakarta site a package called servhelper . This servhelper is a thread that is started in a startup servlet and stopped in the destroy method of that startup servlet. So this thread will automatically capture all the system.out.println's and will print those to a file. I believe that this thread program is synchronized. So in this method I need not run multiple instances of OC4J instead each deployed web application on single instance of oc4j uses the same thread program (ofcourse a copy of thread program is put in each of the deployed web applications directories) to log messages on to different log files.
Can you comment on my above 2 approached to logging debugging messages and a compartive explanation to LOG4J and how to use LOG4J using a simple servlet, simple jsp is appreciated ...
Thanks and Regards,
Ravi.

How to use forms trace file for performance tuning

Similar Messages

Maybe you are looking for