How to use FTPS using FTP adapter

I am trying to create one BPEL process using SOA 11g, which will put file on remote location using ftp adapter. I have created JNDI properly and using wallet.
useFtps= True
walletLocation= correct path of wallet created in Oracle HTTP Server(OHS)
walletPassword = walletPassword
host = ipaddress
username = myUsername
password = myPassword
For all this I have followed
Now, whenever I try to test that BPEL process it gives me error:
"Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'Put' failed due to: Error in establishing SSL session. Error in establishing SSL session. Unable to establish SSL session on control channel. Reply String: 530 Please login with USER and PASS. Reply Code: 530) Please correct the setup for SSL. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution"
Any suggestion or resolutions are welcome.

When you configure the Connection Factory for FTP Adapter in Admin Console, provide the following values for the attributes like the hostname, username, password, port and the path of remote location as where
you want to write the file in remote Server i.e., ftpAbsolutePathBegin. Please fill this
attribute with the path like /soa/ftp/file (example path). If you are writing to a remote FTP server you need to create a Connection factory for that as above.
Please try this and let me know...

Similar Messages

  • How to use File Adapter with hierarchial Structure?

    How to use File Adapter with hierarchial Structure like..
    --Header Details:
    Line Item Details:
    Bcoz I am getting a Flatfile in a hierarchial way as shown below.
    Header Details :1
    Line Item a
    Line Item b
    Header Details :2
    Line Item c
    Line Item d

    Hey Kishore,
    In order to create a structure you need to use the file with convertion mode on the sending communication channel of the file adapter.
    check the link for the needed configuration paramters.
    If the structure is more complexed you can use the Contetnt master(CM) from itemfield which allows to ceate XML file from complex flat files and more.
    <a href="">File sender adapter</a>
    If you have any question i'll be more than happy to assist.
    Nimrod Gisis

  • How to use File Adapter in BPEL

    How to use File Adapter in BPEL. I am using Oracle SOA 10g. Any sample or best example in blog or elsewhere ?

    Please check the below links for samples on how to use file adapter in BPEL (in 10g/11g usage is same) and let me know any further queries.
    11g -
    10g -

  • How to use the adapter framework sample_ra.

    I have deployed the sample_ra adapter framework code through NWDS. Now how to use the adapter framework into my scenario.Please answer elaborately .How to call this adapter framework while configuring the communication channel.

    Follow these links I think it will helps you
    NWDS and  generate java proxy
    thanks and regards

  • How to configure FTP Adapter in BPEL PM 10.1.2 Beta3?

    Greetings all!
    I am working on a legacy integration using BPEL PM. I need to use FTP adapter. There is little information in the Beta Documents on FTP Adapter. Can anyone point me to the right direction on how to configure the FTP Adapter, or where to find the document?
    Thanks in advance!

    For more documentation please send a mail to [email protected]

  • How to use Database adapter as inbound adapter without having polling strategies?

    Hi All,
    I have a requirement wherein I have to use Database adapter to retrieve the data for every half an hour from one(X app) database and update that data into another application(Y app) .That database adapter will be along with BPEL process.My Flow would be like this:
    Database Adapter( In 'exposed services' section) ----->   BPEL (in 'Components') -----> Y app service( in 'External References' section)
    My questions for each step are below
         1) I have to retrieve the data from database(x app database) for every half an hour.So I have to schedule my whole process such that it should execute for every half an hour.
    Means I have to get  whatever the data is updated in the last half an hour in that database.
          The database adapter should be inbound in SOA composite editor(in 'Exposed services' section).
    But in order to have inbound adapter,we have select the 'Poll for New or Changed Records in a Table' option in turn we have to select one of polling operations below:
             Delete the Row(s) that were Read
    Update a Field in the [Table_Name] Table (Logical Delete)
    Update a Sequencing Table
    Update an External Sequencing Table on a Different Database
    Control Table Strategy
    But the problem is I don't have any control on the database(X app database) ,So (I can't update any data on that table,because that table may not have a field or table to update the processed rows)I can't choose any of the above operations.
    How can I achieve what I want that is to retrieve the data and schedule the process?
    Thanks in advance.

    Hi Heckler,
      Thank you very much for your answer that I can proceed further somehow.
    I still need to have some clarifications.
    In order to have a process which retrieves the data (Inbound operation) and updates the data into other application, the data(from X app)  should be the request(through DB adapter) of the BPEL process.
    X app does not do anything to send.We have(the BPEL process) to receive the data (or) no event is triggered.
    The flow :
    Database Adapter( In 'exposed services' section to retrieve data) ----->   BPEL (in 'Components') -----> Y app service( in 'External References' section)
    How can we ensure the data will be  request to BPEL process(means it will be in 'exposed services' section in SOA composite editor) for every half an hour if we use pick activity and database adapter as first activity?
    When we use ''Poll for New or Changed Records in a Table' ,then only adapter becomes inbound and comes into the 'exposed services' section.I can't use it as I don't have any control on the source table.
    I have this confusion before starting the process.Please help me to clear out the doubts.
    And this whole process should be executed automaticallly for every half an hour(means it creates instance for every half an hour)  Once we build the BPEL process.
    How to schedule it?
    And where do I need to create control table ?You mean I have to use some different database where in I have to create the table?

  • How to use Database Adapter in BPEL

    I want to use Database Adapter in BPEL to transfer data from one table to other table and the data is still hold in the read table?
    I can find a example from
    And the general design of my BPEL is as following:
    1. Add a "status" column to the read table. And alter the value of status column of all data in read table to "unreaded".
    2. Then create a empty BPEL (BPELAdapter) Project.
    3. Add a Database Adapter:
    (1) In step 1 of Adapter Configuration Wizard, configure the Service Name to datain.
    (2) In step 2, configure the database connection.
    (3) In step 3, choose "Poll for New or Changed Records in a Table".
    (4) Then click Import Tables button, and choose the read table.
    (5) In step 5, choose a column.
    (6) Don’t do anything in step 6 and 7.
    (7) In step 8, choose "Update a Field in the [Datain] Table (Logical Delete)".
    (8) In step 9, configure Logical Delete Field to STATUS, configure Read Value to readed and configure Unread Value to unreaded.
    (9) Don’t do anything in step 10 and 11.
    4. Add a receive activity to connect to above database adapter.
    5. Add another Database Adapter. Then configure this database adapter service WSDL:
    (1) In step 1 of Adapter Configuration Wizard, configure the Service Name to dataout.
    (2) In step 2, configure the database connection.
    (3) In step 3, choose Perform an Operation on a Table (and all items under it).
    (4) Then click Import Tables button, and choose the write table.
    (5) In step 5, choose a column.
    (6) Don’t do anything in step 6, 7 and 8.
    6. Add a invoke activity to connect to above database adapter.
    7. Add a assign activity between the receive activity and invoke activity. And configure the assign copy operation.
    But after I deploy this BPEL project to the BPEL server and invoke this project, I get following error. Meanwhile, this BPEL don't take effect.
    The following exception occured while processing this request:
    Can't find partnerLinkType 2.
    "file:/D:/soft/SOASuite/product/" WSDL to find PartnerLinkType "{"。
    How to resolve?

    Now, I can insert data into the table through Database Adapter.
    But still can't select data from the table through Database Adapter.
    Above error still happen when invoke the read database table with Database Adapter project:
    Can't find partnerLinkType 2.
    "file:/D:/soft/SOASuite/product/" WSDL to find PartnerLinkType "{"。

  • How to use File Adapter Receiver to write attachments

    i have a scenario, in which our own XInotes adapter sends an XIMessage from an IBM Lotus Notes database into XI. This XIMessage contains an XML document as application main document and several PDF files as additional attachments 
    On the receiver side, i must use a File Adapter to write both the XML documents and the PDF attachments into a directory.
    The problem is i don't know how to use the file adapter receiver to write the attachments. In the Channel Monitoring, i can see that all PDF files are transferred to the file receiver. But the file adapter writes only the XML document into the directory.
    I've also tried the AF_Modules/PayloadSwapBean, but it can only swap one PDF file into the application payload. And the file name must be hard coded in the module configuration as swap.KeyName.
    Could anyone give me any ideas?
    thanks a lot in advance

    receiver file adapters do not supprt attachments.
    Only File Sender adapter is capable of handling attachments not the receiver.
    Configuring the sender FILE adapter
    The sender file adapter is configured to pick the normal payload (file1.xml), which is specified in the File
    access parameters, and the additional image file (file1.jpg) that is to be sent as an attachment is configured
    under the Additional File(s) as shown in the screenshot below. The file type would still remain binary.
    Since, by default, XI sends payload and attachments in XML format, we need to call two beans, namely the
    MessageTransformBean and the PayloadSwapBean to help us is transforming the content to jpeg format
    and also change the file extension.
    The PayloadSwapBean module is used to replace the application payload of the XI message that holds the
    data with another payload which is appended to the message as an attachment. In our case, the payload
    would be file1.xml whereas the attachment would be file1.jpg
    The swap module is denoted in our scenario with the module key ‘swap’. It has two parameters from the
    MIME header.

  • How to Use JCA adapter

    I have a JCA compliant adapter that i like to use to integrate a legacy application but i have seen no information on how to use a JCA adapter from Oracle Integration.
    Any help is appreciated.

    Hi Gerardo
    Oracle Interconnect 10g enables third party adapter integration through a proprietary SDK, which is not JCA compliant.
    Oracle ProcessConnect relies on JCA (plus more) for communicating with standard and third party adapters. Since ProcessConnect 10g is based on JCA 1.0 (due to spec availability), Oracle had to extend the JCA 'contract' with certain Design Time and Runtime inbound API's which an adapter also must implement in order to seamlessly interoperate with ProcessConnect. Oracle can provide you with the necessary ADK (Adapter Development Kit) if you join the Early Access program.
    Please indicate here if you would like to join this program and I will provide you with pertinent contact information so you can initiate this.

  • How to configure FTP Adapter for multiple endpoints?

    Scenario: I have multiple ftp endpoints (5-15) and depending on some business logic, I have to send data to the right destination. With default ftp adapter configuration, I have to add a n adapter connection factory reachable via JNDI for each destination. But I want to read the different endpoints dynamically from e.g. a database and configure my ftp adapter at runtime. That's because the endpoints do change quite often.
    Interconnect had such a feature: FTP Sender: The FTP adapter supports sending to multiple FTP endpoints. This feature provides flexibility for sending messages to different remote FTP servers.
    Any ideas on that for SOA Suite?

    For more documentation please send a mail to [email protected]

  • How to use File Adapter to transport files

    Can i use File Adapter Additional Files settings to Transfer files from one system to other without conversion?
    File Adapter's Additional Files documentation says "additional attachments require a receiver that can process them". In my case receiver is also
    File Adapter.
    Please let me know if there is any other way to achive this.
    Thanks in Advance

    Hi Jayant -
    Here is the link to the documentation related to this:
    Notice in "Rules for Additional Files":
    "Messages with additional attachments require a receiver that can process them."
    Currently, the receiver file adapter does not support the processing of attachments.

  • Re:  Hi friends How to use sseeburger adapter in SAP PI

    I am newly in sap pi.
    can any one explain Seeburger adapter briefly

    Hi Ranga,
        Welcome to SCN.
    As you are new around here, i suggest you to please search the forum before posting your question.
    To answer to your question, Seeburger is the name of the company which provides its set of adapters for SAP PI.
    I assume that you are talking about the Seerburger AS2 adapter, as it is the mostly used seeburger adapter.
    The Seeburger AS2 adapter is capable of translating an EDIFACT/ ANSIX12 message/file into a format that is understood by PI and vice versa.
    It is also capable of handling the AS2 transport protocol (EDI Over internet).
    Best Regards,

  • How to use AQ Adapter for Enqueue and Dequeue in BPEL process

    Can anyone help me how to use Enqueue and Dequeue in BPEL process ? Any good sample or material /tutorial??

    You shoul create a while loop, that loops through XML payload for each row. Than you can process each individual row. See also example:

  • How to use BC adapter

    Dear Friends,
       This is Shalini,
                     My Requirement is Third party system is sending the Purchase Order in XML file they are using Business connectors.
    They are sending the PO to XI System , from XI  that PO's sending TO R/3 System
    After  Sales Order creatin in R/3 we have to send the Confiramtion to that Business connector system.
    How to do I don't know.
    Please help me, this is very helpful .
    Shalini Shah

    but what you don't know?
    do you have BC details necessary for BC adapter?
    if so then you just send the XML file to this adapter
    is anything not working with that ?
    Michal Krawczyk

  • How to use wireless adapter in Satellite C660D?

    Hi everyone!
    Got crazy searching for the wireless adapter in Satellite C660D-164..does it have one inbuilt? or do I have to buy an external one? Can't figure out how to set up wi-fi and bluetooth. The manual is non descriptive.
    Installed all the drivers form site.
    Pleas help asap.

    In the device manager you can find the list of all available devices.
    Under Network Adapters you should find the available Wlan card.
    In order to use the Wlan, you have to enable this firstly.
    Use Fn + F8 in order to switch ON the Wlan.
    Then you should see a small icon in the task bar (right bottom corner). Right click on this and check if you Wlan Home Network is visible.
    Then insert the encryption password and usually the notebook should connect to the home Wlan.

  • Configuration for ftp adapter in soa11g

    I am new in soa11g,can anyone help me for how to configure ftp adapter in console, to use ftp adapter.
    thanx and regards
    Edited by: 857480 on 10-May-2011 02:55

    but now i am getting exception like
    BINDING.JCA-12563 Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'Put' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. ftpDemo:put [ Put_ptt::Put(body) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/Ftp/PrashantFtp'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/Ftp/PrashantFtp. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server Please make sure that the JCA connection factory and any dependent connection factories have been configured with a sufficient limit for max connections. Please also make sure that the physical connection to the backend EIS is available and the backend itself is accepting connections. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
    plz help.

Maybe you are looking for