How to use LabVIEW read Motorola S-records ?

Hello, every1,
 I am trying to use LabVIEW solve the question of S-record file and record formatfile。
My idea：load S-record file and convert array to display it, then, separate 'type', 'count', 'address', 'data' and 'checksum'.
Help me.
3x.
Note: about s-record file:
Motorola S-records
The following fairly complete description of Motorola S-records was found a number of years ago on the man pages of a UNIX system.

Hi
Last week someone asked the same for Intel HEX files. I wonder why these questions pop-up at the same time.
http://forums.ni.com/ni/board/message?board.id=170&message.id=169393&query.id=42519#M169393
The program I wrote was for checking the data in the file. I can rewire the S-record reader (it will take some time ) but you have to make the presentation yourself.
Is this an option ?

Similar Messages

  • How to use labview with gpib to connect with Agilent PNA E8362B ?

    how to use labview with gpib to connect with Agilent PNA E8362B ?i am newbie ..just started to work on labview about a fortnite bck and +i am a novice in interfacing(networking... jst know tidbits) skill ..so plzzzzz explain me in a litle detail

    Duplicate Post.

  • How to use LABVIEW to collect wireless network camera (with video server) video.

    How to use LABVIEW to collect wireless network camera (with video server) video.I would like to use LABVIEW for a wireless network camera (IP Camera comes with the video server module)the client program.Will the ability to achieve?If feasible, how to do, there are examples, thank you.

    I believe NI Vision is what you are looking for. 

  • Adobe Reader does not work-how to use adobe reader on Lion

    I was trying to print an international label on eBay via Adobe Reader, and was very dissapointed and shocked that it does not work on Lion.
    I was so happy that I figured out how to use adobe reader on Lion, and hope I can help anyone else who is frusterated too.
    Step 1. Download Google Chrome
    Step 2. Printe your international label, or whatever you need to do that uses Adobe Reader

    Thanks Shelly! I too was having trouble and thought it was something wrong with my Mac. I still have a big though. When I try to print the saved pdf file, I get a pop-up that says "The document could not be printed. There are no selected pages to print" even though I am looking at the complete doc. It's there and in my print prompt "all pages" are selected to print. The way I got around this, is by emailing the pdf file to a gmail address and viewing the attachment via Google Docs. It loads perfectly and prints without a problem.
    Carla

  • I need to program a Hittite Fractional​-N Synthesize​r Evaluation Kit with a HMC702LP6C​E an external YIG oscillator​. Not sure how to use Labview to control the PLL.

    I need to program a Hittite Fractional-N Synthesizer Evaluation Kit with a HMC702LP6CE an external YIG oscillator.  Not sure how to use Labview to control the PLL.

    Here is how to use the PLL. But I don't know of how to interact with that device
    http://zone.ni.com/devzone/cda/tut/p/id/3781
    And for thouse who don't know what a PLL is a free bonus link is here:
    http://digital.ni.com/public.nsf/allkb/07BC8D77D4E​9AE258625708B007CE74F?OpenDocument
    and a second one on what that device is: http://www.hittite.com/products/view.html/view/HMC​702LP6CE
    Now we are all caught up to speed.
    Sam S
    Applications Engineer
    National Instruments

  • How to use labview with the handyboard

    Hi,
    how to use labview with the handyboard
    Thx...

    I'm assuming you're talking about this, since you didn't provide a link for those of us who don't know what you're talking about.
    As the other poster said, you didn't say how you want to use LabVIEW with it.  If you want to write LabVIEW programs than run on the microprocessor, then you're out of luck.  If you want LabVIEW to interact with it, then you've got a couple of options, SPI probably being the best, but it also has DI and AI that you could use to communicate with it - the DI's could be used as a parallel interface.
    Message Edited by Matthew Kelton on 12-17-2007 02:21 PM

  • How to use labview with gpib to connect with Agilent PNA E8362B ?i am newbie ..just started to work on labview about a fortnite bck and a novice in interfacing skill ..so plzzzzz explain me in a litle detail

    how to use labview with gpib to connect with Agilent PNA E8362B ?i am newbie ..just started to work on labview about a fortnite bck and +i am a novice in interfacing(networking... jst know tidbits) skill ..so plzzzzz explain me in a litle detail

    Sir
    We were able to solve that problem...but now could you advice as to which DC power supply we should use (preferably avalable in India) so that it can be controlled by Labview (through a gpib/rs232/any other port) to give a square wave of desired frequency/other parameters.
    Regards
    Shivam

  • How to Use LABVIEW charts with Mathscript

    Hi,
       I recently tried to work on Mathscript and it is really amazing. what I tried to figure out is:
        Instead of plotting using traditional "plot" statement, how to use LabVIEW chart ( I know how to Add output but the graph were not as expected
    Is there any mean to get rid of this "Lengthy" delay that "ALL MATLAB User know" for first time compilation?
    Thanks in advance
    Waleed El-Badry MSc.,MCPD, ISTQB Certified Tester
    Assistant Lecturer
    Mechatronics Department
    Faculty of Engineering
    Misr University for Science & Technology

    Well Chris,
             I was about to post the solution, but as I said, I'm in a middle of experts
    It took me 3 hours to figure it out. I should've checked your answer . I resolved to the same suggesstion of yours. I only added some functionality to get the newbies like me being acquainting with how easy to work with LABVIEW mathscript based on MATLAB knowledge.
    Waleed El-Badry MSc.,MCPD, ISTQB Certified Tester
    Assistant Lecturer
    Mechatronics Department
    Faculty of Engineering
    Misr University for Science & Technology
    Attachments:
    Play with Mathscript.vi ‏35 KB

  • How to use LabView to control Primera Bravo II CD burner?

    I am trying to use LabView to control the Primera Bravo II CD burner and label printer. The software that controls the Bravo II is PTPublisher. How to use LabView to communicate/control the PTPublisher? Please help, Thanks

    Hi Qian,
    I installed PTPublisher on a virtual machine, and I was wondering what kind of tasks you wanted to control within LabVIEW.  From the program GUI, it appears like the only way to access functions is via mouse clicks.  Do you know of any other way to control the Bravo II CD burner besides the PTPublisher software?  If not, does the PTPublisher allow you to control it in some way other than clicking?
    Peter K.
    National Instruments

  • How to use labview to control a robotic arm by EMG signal

    Hello,
    I am working on simulation of an active Exoskeleton (wearable robot) for the upper limb using LabVIEW for my senior project. I need to use the EMG signal as an input to move the elbow joint (flexing and extending). I downloaded labview biomedical toolkit to take a ready simulated EMG signal but have a weak experience in LabVIEW.
    The design criterial I am planning to use is to establish a threshold for the EMG signal using a comparator (above 0 for example) and set a counter for everytime the signal passes the threshold as(+1) in every count. Then, specify a degree value for the counter (for example when the counter reaches 10000) and feed this value of the counter to a simple simulated structure for the joint (simple angle of 2 lines) or a meter to represent the movement.. e.g. every 10000 count = 1 degree of movement. Zero crossing can also be used instead of the comparator and the signal will be filtered and that is easy to do. However, my problem is in converting this logic into LabVIEW. I don’t know how to set a counter for the signal and make every number of counts refer to a specific degree of movement and I also don’t know how to form the simulated joint structure in LabVIEW or even how to transfer this into a simple meter device in LabVIEW.
    I have only one month to do this project so any help or ideas you provide are highly appreciated
    Thank you ,

    CarlFHellwig 
    Thank you for providing this example I just implement  it in the software to check the counter results.
    In fact, the design criteria I desided to use latly is to use is to establish a threshold for the EMG signal using a comparator and correlate the EMG signal with the angles of movement of a simple simulated structure "motor" for a single joint (simple angle of 2 lines) eg. 30,60,90,120,150 degrees for flexing and extending. Zero crossing can also be used instead of the comparator and the signal will be filtered and that is easy to do. 
    In other words, the idea is to drive a motor for different angles based on the input EMG signals. I am now stuck with developing the algorithm of how the angles are related to the RMS value of the signal while flexing and extending and how to convert this RMS into angular velocity and angular position to form the simulation. 
    I will be grateful if someone guided me to a person did a similar project to discuss some issues. 
     

  • Is there any one knows how to use labview 6.0 to make a "continue" function like the one in C language?

    I am using labview 6.0 and i like to know is there any one knows how to stop the current iteration in while loop or for loop and continue to do the next iteration,just like the "continue" statement in C or C++ language?

    Simple test here in LV6 confims that you can't do this. Not in a useful
    sense anyway. "Stop" doesn't stop execution simply of the current VI, it
    also kills all VIs above it. It would hence be difficult to argue that this
    approach is in any way similar to "continue".
    What version of Labview have you tested this on and can you post a
    demonstration?
    Craig Graham
    Physicist/Labview Programmer
    Lancaster University, UK
    "Oleg" wrote in message
    news:506500000005000000E45B0000-1011517314000@exch​ange.ni.com...
    > Hi,
    > you can orginize all the inner actions of your while loop into the
    > SubVI. Then use the Functios/Application Control/Stop.vi in this SubVI
    > to stop the current interation in any point you want. This will stop
    > your SubVI and yo
    u will automatically goto the next iteration in your
    > while loop.

  • How to use Labview 7.0 to make program interface?

    Hellow!
    Will Labview 7.0 be able to make the program interface? just like some application software made by VC++,VB?
    The program interface should have the menu,button,...
    Thanks!

    You can use LV to create a fully working program with an interface of your design, just like you would in any other compiler. LV actually serves as a compiler for a graphical language called G, which is based on dataflow instead of text based execution (the data "flows" through wires from one function to the next, controlling execution order and filling the role of variables).
    Since LV is multiplatform (and not MS), its default controls are not identical to those in VC and VB, but those can be accessed to. Actually, in many ways, it's much easier to build an interface in LV, because building the interface actually defines your "variables" and your interaction with the code.
    An interface would be no good without a program, so you will have to know how to use LV. It's much faster to learn than other languages, but you will still need some experience to write good programs.
    To learn more, I suggest you start by reading the LabVIEW user manual. Also, try searching this site and google for LabVIEW tutorials. Here and here are a couple you can start with. You can also contact your local NI office and join one of their courses.
    In addition, I suggest you read the LabVIEW style guide.
    If your question was only about MS buttons, like in VB and VC, you can find them in the Dialog Controls palette, or you can use ActiveX to embed them into your program.
    Try to take over the world!

  • How to use Labview to input some DOS command

    Dear everyone,
    This is the first time I program external device using Labview. You may come up the solution for me in 2 seconds, but it took me more than 20 hrs and still not success.
    My question is I need to control a 68HC11 device. It seems like I need to use DOS to upload a *.S19 file before I am able to talk with the device. Is there any way, I can upload the S19 file and some setting using Labview instead to go to DOS? I try to use DOS to upload S19 file and do setting FIRST and then use Labview to input command, but it doesn't success.
    Please help!!
    Thanks
    Attachments:
    PROGRAM.txt ‏2 KB
    BM_11.DOC ‏20 KB

    It seems you are using zterm from the commandline to communicate to a serial device (this is not DOS per se, you are just using a DOS window to start the zterm program).
    You should be able to duplicate all that in LabVIEW by communicating directly with the serial port. Are you sure you have to program your module every time?
    Apparently, F9 initiates some file transfer. Do you know what standard it uses (e.g. xmodem, zmodem, etc.)? LabVIEW does not incoroprate serial transfer utilities, but there might be utilities available elsewhere (see this note).
    There should also be no problem uploading the code using zterm, then later
    communicate with the device using LabVIEW by sending commands to the serial port. What do you mean exactly by "but it doesn't success". How are you communicating? What kind of errors are you getting?
    LabVIEW Champion . Do more with less code and in less time .

  • How to use Labview to show video live to another remote laptop

    Hi, I am using labview with a DAQ device with data reading and a web camera. Firstly I would like to show the reading of DAQ device data and live video on the PC with labview. Secondly, I would like to access both device data and video on a remote laptop preferly on a web browser.  
    Could anyone guide me in how to this could be done. Thanks in advance.

    Hi,
    I had the same issue.
    A very easy method of resolution is the DataSocket.
    Communicating Two VIs in Two Computers Using DataSocket:
    https://decibel.ni.com/content/docs/DOC-4905
    Sending an Image over Data Socket:
    http://zone.ni.com/devzone/cda/epd/p/id/2307
    Hope this examples will help you.
    ---Please mark a post as a Solution if it solved your problem ---

  • "HOW to use Labview call Dll compiled by VC++"

    "hello,I use VC++ compile a DLL,and i want to call DLL Function in LABVIEW program.But there is a dll function
    when i call it in labview.There is error.The prototype of Dll Function that make error is "USHORT DLLFUN __stdcall IBWRT(unsigned short dev_address,const char *pstrWrite)",The second paramenter is a char pointer,
    and the paramenter pass a command which content is
    "MEASURE:CURRENTC? 1A,0.001MA".
    When i use VC++ to call this function,i program followed:
    CString m_wrt;
    int ReturnW;
    m_wrt="MEASURE:CURRENTC? 1A,0.001MA";
    char buffer[40];
    strcpy(buffer,m_wrt);
    ReturnW=IBWRT(4,buffer);
    and this call is correct.
    But when i use labview to call this function.ther
    e is
    error.So, who can help me,to tell me how to call this
    function.Thanks."

    Are you asking about porting code or calling C++ code in LabVIEW?  As far as porting code, there's no easy way to move code back and forth between LabVIEW and C++.  However, if you are trying to call C++ code in LabVIEW, you can compile it as a DLL and call it in LabVIEW using the Call Library Function node.
    Chad B. » National Instruments » ni.com

Maybe you are looking for