How to use Linux OS parallel with Windows

I've been using my laptop(P500) for a year and half now, It has been Windows 8 since then. I need to use Linux OS (CentOS) for my studies. How can I use Linux and Windows 8 on the same device?
There are 2 drives; C: 650GB and D: 24GB

It sounds like a problem of advanced network parameter settings.
You can start "Interface Configuration Utility", choose the port and select "Edit", then choose "Advanced..." button to have "Advanced Stack Configuration" dialog.
Change values to:
T1 0x40000,
T2 0x40000,
T3 0x30000,
Slot Time 5
Click OK to close "Interface Configuration Utility", and run NI-FBUS CM or Configurator to check whether it helps.
If you have 3.0 or 3.1 version, you just choose the "Old Default" button to set the values automatically.

Similar Messages

How to use the FP 3000 with windows XP?

Hi to all,
Actually I have a problem using My FP-3000 nifbus with a windows xp proffetional station.
previously I was using it with nifbus configurator and communication manager, both of version 2.3 and then I upgraded to 2.3.6 (using windows 2000) and now I am trying to use it with windows xp, but the configurator does not communicate with fp-3000 and it doesn't show any function blocks.
I started by installing the 2.3 configurator and manager, but the PCMCIA fbus/2 card that I'm using was not recognised by windows.
so I upgraded to 2.3.6, the pcmcia card was now recognised by windows but the communication manager kept giving a communication error.
so I installed the communication manager version 3.0, which started successfu
lly and the configurator started but the fp-3000 was not present.
I tried updating the firmware, but the upgrade.exe did not disfunctioned and gave strange module names in the window, and it did not download the firmware.
I also tried resetting the fp-3000 but still no luck.
so any one can tell me what software and what versions should I use to overcome this problem?

It sounds like a problem of advanced network parameter settings.
You can start "Interface Configuration Utility", choose the port and select "Edit", then choose "Advanced..." button to have "Advanced Stack Configuration" dialog.
Change values to:
T1 0x40000,
T2 0x40000,
T3 0x30000,
Slot Time 5
Click OK to close "Interface Configuration Utility", and run NI-FBUS CM or Configurator to check whether it helps.
If you have 3.0 or 3.1 version, you just choose the "Old Default" button to set the values automatically.

How to use iMac to work with windows computers like pcAnywhere?

I just bought my first iMac, and love it. I run pcAnywhere (version 12.1) on a few windows computers for work, but need to connect to them via my new iMac and using a phone line modem. How do I do this; and I am fairly new to Mac. I have tried to install the pcAnywhere on my Mac, using pcAnywhere Cross Platform, but it will not connect at all and the error code I get is below:
You can't open the application "pcAnywhere CrossPlatform" because PowerPC applications are no longer supported.
It took me over an hour to get it installed, via java downloads. I connect on my old PC's with a phone number to connect via the modem because where I am connecting to has no Internet other than a phone line.
Please help!!

The PCAnywhere application you are trying to run is too old to be supported on a Mac running Lion, Mountain Lion, or any newer MacOS. I would check to see if PCAnywhere has released an updated version of the application that you can use. If not, you will probably need to go the route of virtualization (or keep an old PC around for supporting work).
If you have to use virtualization, then you might want to consider using Virtual Box (a free app) to install Windows 7 on a virtual PC, then just run the PC version of your PCAnywhere software just like you would on any other PC. You could use Virtual Box to install a MacOS 10.6.8 (Snow Leopard) instance and run your existing Mac version of the PCAnywhere software, but you would probably be better off to just use the Windows version.

How to use my time capsule with windows vista

i have a 2tb time capsule iphone 3gs appple tv and a ipad 2 the wife and kids have iphone 3gs and 4 and id like to set up a home network for us all to use and share music and photos is this possible

Sorry the title never gets into detail at any point.. no vista computer is listed.
Access the vista computer to TC turn on the guest network and allow full read write access. Make sure you have the workgroup set correctly. There are issues sometimes on the windows side but try that.
As for using the TC as a file store.. well it isn't a good idea. It is a backup device.. which has no ability to back up itself. There is no mirrored disks and one day it will die and you can say bye bye to your precious photos and music. You can work your way around the issue.. sure.. in the end you will need an alternative backup on a computer.. that alternative backup will then be backed up to where??
If you must run your itunes and iphoto library on the TC just read about how to set up the libraries in network location. Google will find the posts.
http://gigaom.com/apple/using-time-capsule-as-a-media-drive/
You perhaps should read all the other posts about why not.. as well as how to.

How to use an external display with Windows 7 and a Macbook Pro (Unibody)

I just set up my new Macbook Pro 15 inch with the Windows 7 beta, and noticed that I couldn't get the external monitor to be seen using Windows 7 only. I am using my Dell 30 inch monitor and it was only seeing the laptop's main display. The fix was to download the Nvidia video drivers for the 9 series (e.g. the GeForce 9600/9400), after which it was maically able to see the display.
The driver can be found here. Enjoy.
http://www.nvidia.com/object/windows7overview.html

Does Aero work?
Maybe it will fix some of my problems:
http://discussions.apple.com/thread.jspa?threadID=2088220&tstart=0

I have take pictures from my ipad 4. How to download to my computer with windows operating system conneted through USB cable with out using internet

I have take pictures from my ipad 4. How to download to my computer with windows operating system conneted through USB cable with out using internet

Plug your iPad into your computer. THere may be a delay while it installs drivers but if you can see your iPad in windows explorer, use that to get to your photos.
Click on your iPad and you should see a DCIM folder. Click thorugh that to find your photos.
Windows explorer will see your iPad as nothing more than a digital camera, and that's the part you're trying to access.

How to use Linux legally for business in the US

Hello.
I am doing some research on software patents and how they inhibit businesses in the US from using FOSS.
My question is, basically, what would a business have to do in the US to use Linux in place of Windows/Mac and make sure they are not violating software patents? Violating these patents (for example, including an illegal H.264 codec in a company's system image so that video can be played by employees) present a serious liability to US businesses and could potentially discourage them from abandoning a proprietary OS for a free one.
One portion (of many) of this discussion I do not understand is how does one guarantee their system is clean of illegal codecs? For example, assume if one used his/her package manager to delete any codec-related packages he/she could find. If this person used a web browser to navigate to a website that included in-page H.264 videos or sound effects encoded using MP3, would this content merely not function (meaning, the person would be legally safe but unable to play the content)? Or do web browsers have these illegal codecs built in? I don't understand how website programming works enough to know the answer to this particular question.
I would appreciate any insight on this issue (and/or any thoughts you might have on this subject).
Thank you for your time.

See distro's to avoid here if you are in the US:
http://www.gnu.org/distros/common-distros.html
And, linked from that page, see ones that should be safer:
http://www.gnu.org/distros/free-distros.html
With Parbola:
https://parabolagnulinux.org/
Being Free and based on Arch.
Now, the problem, completely free is very picky about the hardware it will run on so you will want to procure hardware specifically built to run under a Free system without issues. Licensed distributables you can get away with using, for example: Adobe Flash Player. Just accept the license agreement and you should be good to go. The minefield is that somewhere in even the Free code there could be a patent lying in wait. Something that someone in the US patented and the Free systems programmers were not aware of it. This is an issue in the US because commercial Operating Systems such as Windows will indemnify their users against patent infringement. On Free systems however you, the business using them, could end up being on the hook for significant damages.
The reason a completely Free system is very picky about what hardware it will run on is because all those binary blobs in common Linux distributions contain code that just makes stuff work. Without that you have to make absolutely sure that what you have will work with just Free software.
See:
http://www.gnu.org/philosophy/fighting- … tents.html
Last edited by headkase (2013-02-21 01:25:52)

How to use JavaMail 1.4 with Oracle Application Server 10g (9.0.4.0.0)

Hi all,
I'd like to know if it's possible and how to use JavaMail 1.4 with Oracle Application Server 10g (9.0.4.0.0), Windows version.
With the following code, I can see that the mail.jar used by the server is the one included in the jdk installation :
// I'm testing InternetAddress.class because I want to use commons-email-1.2.jar that requires mail.jar 1.4 (or higher) and activation.jar 1.1 (or higher)
// and I know that inside the commons-email-1.2.jar file, I need to call the InternetAddress.validate() method that throws a java.lang.NoSuchMethodError: javax.mail.internet.InternetAddress.validate()V if it is used with mail.jar 1.2.
Class cls = javax.mail.internet.InternetAddress.class;
java.security.ProtectionDomain pDomain = cls.getProtectionDomain();
java.security.CodeSource cSource = pDomain.getCodeSource();
java.net.URL location = cSource.getLocation();
System.out.println(location.toString());
This code returns : file:/C:/oracle/app/jdk/jre/lib/ext/mail.jar and this mail.jar file has an implementation version number: 1.2
- I've tried to include my own mail.jar (1.4.2) and activation.jar (1.1.1) files in the war file that I deploy, but it doesn't work (the server still uses the same mail.jar 1.2)
- I've tried to put the mail.jar (1.4.2) and activation.jar (1.1.1) files in the applib directory of my OC4J instance, but it doesn't work (the server still uses the same mail.jar 1.2)
- I know that a patch exists : I've read the following document: How to Make Libraries such as mail.jar and activation.jar Swappable ? [ID 552432.1]
This article talks about the Patch 6514136, but this patch only applies to : Oracle Containers for J2EE - Version: 10.1.3.3.0
Can you please help me ?
Thanks in advance for your answers,
Laurent

I strongly suggest to upgrade to AS 10.1.3 to get this.
Think of future support of AS 9.0.4. You will get not critical patch updates anymore.
--olaf

HT4623 I have an apple ID account with $25.00, I purchased an kids game app {plants vs zombies}, the app shows up as purchased and downloaded but I can't get it to start. I'm using an Hp laptop with Windows 8.

I hav an apple ID account with balance of $25,00. I used .99 to buy gameapp for grandson. We also downloaded a freebie or two. The games show up under the apps purchased. However I can not get the games to start using my HP laptop with windows 8. Any suggestions on how to play games purchase thru the Apple App Store but played on android deices.? Tkx

You can only use apps from iTunes on iPhone devices.
If you want apps for Android devices then you'll need to download the app on the Google Play Store on your Android devices.
If you don't have the Google Play Store you could dowload if from Google.
Windows 8 also has there own App Store.

How can use linux in my macbook?

how can use linux in my macbook?

You can use various distributions of Linux either by running them under Boot Camp, or in a virtualized environment such as Parallels or VMWare's Fusion. Note that you may have to try several different distros until you find one that works. I settled on Ubuntu running under Parallels.
Best of luck.

USING PHOTOSHOP ELEMENTS 9 WITH WINDOWS 7 CURSUR ISSUE

USING PHOTOSHOP ELEMENTS 9 WITH WINDOWS 7 I HAVE THREE SMALL BOXES FOR A CURSOR IN PLACE OF A SMALL ARROW. HOW CAN I CORRECT THIS ISSUE. I HAVE LOADED THE TWO PATCH FILES THAT ARE NOT RAW FILE RELATED BUT I STILL HAVE THE ISSUE.

First all, please don't write in all caps. Dificult to read and very rude, it's like shouting.
Secondly, you're in the wrong forum. You want the Elements forum:
http://forums.adobe.com/community/photoshop_elements?view=discussions

Who has figured out how to use a print server with LR 2.1?

Who has figured out how to use a print server with LR 2.1?
Mac OS 10.4.11, G5 2.3 dual, 8 GB RAM. PS CS 3 Dual monitors
Print server is Mac G4 dual 533 (audio)
Epson Pro 9600 and Epson R2400 Both are connect by USB. Could be connected with FW 400.
I can use a print server with PS However color management does not come through when using a print server and LR. Image prints, but color horrendous.
All custom .icc profiles are on both the G5 and the print server, G4 dual 533 (audio)

Hi,
Based on my research, if we want to filter events based on user name, we need to edit the XML query.
Please refer to this blog below:
Advanced XML filtering in the Windows Event Viewer
http://blogs.technet.com/b/askds/archive/2011/09/26/advanced-xml-filtering-in-the-windows-event-viewer.aspx
Best Regards,
Amy

How to use adobe 5.0 on windows 7 to install 2 upgrades.

how to use adobe 5.0 on windows 7 to install 2 upgrades.

Keith you maybe facing an issue with trying to install Photoshop CS2 on Windows 7 in general. If you have both serial numbers registered, and one of them is a full version, then you can request that your software be unlocked to allow for installation. Our support team will better be able to determine your eligibility for this. You can contact them via chat at http://adobe.ly/yxj0t6.

Running parallels with windows xp. want to upgrade my Quickbooks to 2013, but it will not recognize the disc. Help!

running parallels with windows xp and OS X Lion. Trying to upgrade my Quickbooks on the windows side to the new 2013 version. The windows side does not even recognize the disc. What am I doing wrong?

S that QB edition is only for windows 8. It won't run on any earlier version of windows.
Looking at the QB 2013 system requirement it runs on XP.
http://support.quickbooks.intuit.com/support/articles/INF21187
So the version of windows is not your problem. Your problem is the virtual machine is not se to use the mac dvd drive. Have you looking into the machine settings. Not windows settings, the virtual machine settings. Make sure it is set to connect the mac dvd drive to the virtual machine.
A good place to start would be the parallels help system. Not the windows help system.

I cant download new music to my ipod. I am now using a new computer with Windows 8.

I cant download new music to my ipod. I am now using a new computer with Windows 8. Itunes is now on the new computer. New songs apear there and will play on the computer.

I plugged my ipod into the computer, it "interacted" briefly, but when finished, the new songs were not on the ipod. (It is an older ipod I have had for years). I just read on a different post how to access the latest itunes program update. I did that, then plugged the ipod into the computer again. The ipod is now real busy interacting with the computer a lot longer. Maybe that fixed it. I will let you know after it is finished. Thanks for the help!

How to use Linux OS parallel with Windows

Similar Messages

Maybe you are looking for