How to use mac's full screen functionality with Adobe acrobat XI?

I recently switched to mac, so font have  much experience with this.
My adobe reader is missing mac's full screen functionality (the two arrows on right that make mac fullscreen).
so, if i have three pdfs open, i cannot switch between them using the 4 finger swipe..
Please note that this is different from the adobe functionality (command + L) which allows it to become fullscreen, but it still occupies the desktop and so, i cannot swipe between different pdfs.
Thank you!

Nope that is just the way it is with Mac OS X and the way Apple has setup the dual screen system.

Similar Messages

  • How to use the set full screen mode ?

    hai...i' a newbie ..i hav one question ...how to use the set full screen mode for my application..
    i found.
    public void setfullscreenmode (boolean mode)
    but when try in my application it error and other
    canvas.setfullscreenmode(true);
    actually i don't know where i should put this code

    i also found the coding it use like
    setFullScreenMode (true);
    but when i apply it ..it error because cannot resolve the symbol.
    my question is which one i should use; declare the
    public void setFullScreenMode (boolean mode);
    first or use
    setFullScreenMode (true) ;
    or other way ..what i need to do to use setFullScreenMode

  • How to use Mac Mini Server as NAT with only one port??

    How to use Mac Mini Server as NAT with only one ethernet port??

    But why did apple sell me this server that does NAT with one port? I don't get it.

  • How to use a mysql built-in function with dataprovider

    hi.
    I want to use a mysql built-in function, for example, MD5() on a column when updating a table with dataprovider.
    Something like this doesn't work:
    MyDataProviderOne.setValue("tablename.field_name", "MD5('some text')");
    How should it be done?
    thanks.
    Mike.

    hi.
    thanks. this helped, but I'd like to use also different functions, that's why, I'd rather do it by MySQL built-in functions with dataprovider... Is there any way to do that?
    best regards.
    Mike.

  • How do I get to full-screen mode in Adobe Reader 10.4.4 for ipad mini? It's vanished.

    I updated Adobe Reader and now double tapping activates zoom. There does not seem to be any way to go to full-screen mode, and reading with the header (time and battery life icons) is unpleasant.

    Thanks for taking the time to post -- especially to a thread that was started almost a year ago.  I'll give your suggestion a try.
    Larry

  • How to use the discrete unit delay function with the simulate signal as the input?

    Hi there,
    I want to use the simulate signal as the input. First, i downsample the input with the downsampler.vi. Then I want to feed the output of the downsampled signal to the discrete unit delay block and display the delayed signal on the graph.
    Somehow I can't use the delay block properly, do anyone know how to fix that?T_T
    thanks!!!!
    Ivy
    please see the attachment
    Attachments:
    test.vi ‏164 KB

    Hi nozombie,
    In your VI the Delay VI only delays the measurment for one interation of your simulation loop.  What are the results that you hope to see?
    Regards,
    Mike Altmann
    LabVIEW Platform PSE
    National Instruments

  • Tips on using Mac OSX 10.7 Lion with Adobe Connect

    Some folks have run into some audio issues when using Captivate and Presenter files playing in a Connect room after upgrading to Lion.
    Apple decided to stop installing popular browser add-ins such as Java and Adobe Flash with Lion.
    1. http://java.com/en/download/index.jsp to install Java for Mac
    2. http://get.adobe.com/flashplayer/ to install Flash for Mac
    Reboot and all should be well. Google's Chrome browser automatically includes Adobe Flash but Safari and Firefox do not so this is a necessary step.
    Those that are hosting Adobe Connect on Lion Mac's will be needing a new host add-in under development. Apple has fixed the bug that was affecting the current Adobe Connect Add-in. The fix is in Apple's 10.7.2 Update coming shortly. I'm using it now and all is well again.

    Thanks for replying.
    When I open Pages from 'Applications', this is the screen that comes up -
    Hmm, I'm slightly confused, I just right clicked Get Info on the Pages app and this appeared...
    It says it was modified 2011, but its version 4.2 which didn't exist in 2011... right?
    Sorry to bother you with this.

  • When i open entourage mail my view used to be full screen now its half screen and i have to maximize now how do i fix this

    when i open entourage mail it use to be full screen and now its half screen so now i have to hit the maximize button how do i fix this

    Click on the green button.  Or you adjust from the bottom right to fill the window.   With Mac OS X 10.7 or later, you can adjust from any of the window edges.  Only upgrade to 10.7 or later if you have read this tip:
    https://discussions.apple.com/docs/DOC-6271

  • When I open "mail" all that opens is the gray ribbon on the top.I have to go to "Mailboxes/inbox" to get it to aspen. What happened? How do I get the full screen to open when I click my "mail" icon like it used to?

    When I open "mail" all that opens is the gray ribbon on the top.I have to go to "Mailboxes/inbox" to get it to aspen. What happened? How do I get the full screen to open when I click my "mail" icon like it used to?

    Move your cursor way over to the right side of the window. There should be a thin bar. when you hover over the left side of the thin bar, the cursor will change to a vertical bar with an arrow sticking out the left. Click and drag to the left.

  • I selected full screen how do i undo it the tab that i used to make full screen isnt there now

    i selected full screen how do i undo it the tab that i used to make full screen isnt there now

    The F11 key will toggle Full Screen Mode on or off
    *See --> http://kb.mozillazine.org/Netbooks#Full_screen
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You may need to update some plug-ins. Check your plug-ins and update as necessary:
    *Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • Full Screen Mode with Window Tabs? (Mac)

    I have never been able to use Full Screen Mode / Full Screen Mode with Menu Bar because my Window Tabs disappear.
    Until now I have ignored this but I really want to start making the most of my screen space. I don't understand how people can go into full screen mode without tabs of their open documents. It makes the experience completely useless to me and I can't believe I can't find any solutions online. I feel like I am overlooking a simple button somewhere on the screen thinking "surely Adobe would include this!?"
    Please help.
    I am currently on 13 inch MacBook Pro using CS6 beta.

    RichardOverton wrote:
    Thanks for the reply, but I already know of this 'workaround', and it isn't a solution for me. There is no functionality in cycling through windows with no idea when you will arrive at the correct PSD. I usually have quite a few open at the same time and I am constantly skipping between them nice and simply with the tabs...Please Adobe just add an option for tabs, all the other components of the layout are optional in full screen, why not tabs?
    Putting in a feature request for tabs in full screen mode is a good idea. One thing Photoshop could do in full screen mode is reveal the menu bar and tabs when the mouse is near the top of the screen. This is sort of an ad-hoc standard in tabbed apps like Chrome and Firefox. Even Adobe Photoshop Lightroom reveals the menu bar in this way, but Photoshop continues to use the same full screen behavior that it had back in the 1990s, when it was one of the few full-screen apps available.
    One workaround is to turn off Window > Application Frame, and when you're in full screen mode use Lion's Mission Control to pick a specific window. This works even better if you use or assign a shortcut to view the windows of a single application.
    c.pfaffenbichler wrote:
    how does everyone else cope?
    As a career-long Mac-user I am not accustomed to tabs and therefore don’t need or use them.
    Tabs have been in Mac apps, such as Apple Safari and Final Cut Pro, for many years.

  • How can I create a full-screen view of Keynote slide in Snow Leopard?

    How can I create a full-screen view of my Keynote slides in Snow Leopard?
    I'm going to be importing into ScreenFlow to create a video.
    Thank you!!

    Welcome to Apple Support Communities.
    Do you want static screen captures or motion video of slides as titles, bullet points, and the like are presented?
    Run the Keynote slide presentation in full-screen mode, then...
    Static full-screen captures - use Command+Shift+3.
    Static partial-screen captures - use Command+Shift+4 and use cursor to select the area of the screen to capture.
    If you want motion video as builds occur, why not use Keynote's built-in Share, Export function?
    (I'm on iLife '09.)
    Also understand that the default slide format for Keynote is 1024x768, not full-screen MacBook 1280x800 screen size, so you'll have wide black borders unless you change the default size or crop the finished screen captures.
    Message was edited by: kostby

  • Adding Full Screen Function Within Browswer

    We are nearing completion of a video project that on our web site we have several quicktime movies that I need to play full screen when they click on the movie link. I can do this within quicktime and also if I type in a URL from within Quicktime, but how do we program that function so that it will open in full screen function by clicking on our links? Any help would be so much appreciated.
    Rob

    Kirk,
    I copied the wrong part. Here it is again.
    Need a little help with QuickTime embed tag for both IE and Firefox.
    We have completed the development of a new mechanism for transmitting very large files over HTTP and I would really like to showcase this new mechanism with QuickTime, my favorite media player. Problem, I do not know how to build the embed tag that will play the Full Screen like what is seen here on the Batman trailer: http://www.apple.com/trailers/wb/batman_begins/trailer4/
    Key Point: I do not want to use iTunes as they did with the Batman trailer.
    When the solution is completed, I would like to have a web page that allows my users to select from a link to play the video in full screen. Once the request is executed, the browser will start playing the video in full screen within the browser.
    1. Is it possible to do this without iTunes?
    2. Is it possible to do Full Screen without leaving the browser? I understand that you could create an XML file to do this but it calls the users local QuickTime player, which I do not want to do.
    <?xml version="1.0"?>
    <?quicktime type="application/x-quicktime-media-link"?>
    <embed
    autoplay="true"
    fullscreen="full"
    loop="false"
    quitwhendone="false"
    volume="90"
    src="" class="moz-txt-link-rfc2396E" href="http://...../video/xlvideo.mov">"http://...../video/xlvideo.mov"
    />
    <object classid="" class="moz-txt-link-rfc2396E" href="clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B">"clsid:02BF25D5-8C17-4B23-BC8 0-D3488ABDDC6B" width="320" height="240" codebase="" class="moz-txt-link-rfc2396E" href="http://www.apple.com/qtactivex/qtplugin.cab">"http://www.apple.com/qtactivex/qtplugin.cab">
    <param name="src" value="/mysites/xl.mov"/>
    <param name="autoplay" value="true" />
    <param name="controller" value="false" />
    <param name="cache" value="true" />
    <param name="href" value="&lt;/mysites/play-fs_v1.qtl&gt; T&lt;quicktimeplayer&gt; E&lt;CONTROLLER=True AUTOPLAY=True&gt;" />
    <embed src="" width="320" height="240" href="" autoplay="true" controller="false" cache="true" pluginspage="http://www.apple.com/quicktime/download/">
    </embed>
    </object>
    Please advise how I can create a solution with QuickTime to deliver Full Screen video from the embed tag without leaving the browser. Thank you in advance for any advise. As soon as we have completed the beta test of the new HTTP mechanism, I look forward to turning it over to this list first. You will be able to load video, VR’s very very very fast.
    Best,
    Donald
    Rob

  • How to show dock in full screen mode

    Hello,
    I'm wondering how to get the dock to show up temporarily in full screen mode. When I place my cursor near the bottom of the screen in a full screen app, the dock doesn't pop up. Is this normal and if so, how do I switch between full screen apps without using gestures on the mouse? I'm really hoping that this is a bug.
    Thanks

    Alternatively you can use the same principle anywhere on the screen, you do not have to scroll to the bottom.  Simply move the cursor to the screen edge where your dock is then move the cursor the same direction again. You do have to briefly pause between the two movements but you can do this anywhere the dock is located, it does not have to be at one position on the screen.  That should speed things up a bit and prevents the dock from appearing by inadvertently scrolling to the side or the bottom.
    If you can, get a Magic Trackpad, Lion navigation works very well with one of these, I think that the days of the mouse are numbered.  The numbers of gestures available with the Magic Trackpad is extensive in Lion.

  • How to use 'Find' menu in Screens

    Hi all,
    I wanted to know how to use 'Find' menu in screens.
    Actually I have created a screen through SE51 and used the pushbutton to assign the function 'Find' ( one with binoculars ). The screen uses a table control to bring all the data from the DB table in the PBO module. When the user uses FIND button the system should prompt a search pop up screen onto which he will enter the search parameter and when he enter that the corresponding line item should be displayed on the tablecontrol. I wanted to know what logic should be incorporated in the program if that pushbutton is used. Please reply immediately. Its urgent.
    Regards,
    Bhavani.
    Edited by: BHAVANI MADIREDDY on Apr 1, 2008 12:31 PM

    Hello,
    In the PAI under a module (user_command for example) when the user click the button you should use the command READ TABLE (if you look at the help, there's some options to do the READ dynamically - [http://help.sap.com/saphelp_nw04/helpdata/en/d3/2e974d35c511d1829f0000e829fbfe/frameset.htm]) to get the line index and with it you set the TOP_LINE of the table control ( tc_table-top_line = sy-index for example).
    Doing this the selected line will be the first in the table control on the next step (PAI/PBO).
    Regards,

Maybe you are looking for

  • Midlet gets null values from servlet

    hey, based on one of the source code examples on the java.sun.com website i made a midlet/servlet application. the midlet is sending a product id to the servlet, the servlet queries the database and shows the productinformation, the midlet reads the

  • Background Job Scheduling for MC.9

    Dear All, Transaction : MC.9 Program Name: RMCB0300 This transaction is running fine on foreground run but i am not able to schedule a background run for it. It's giving an Error message "No List available" when i try to check the output in SM37 Job

  • Vendor Sub-Ranges

    Hi all, I'm trying to create a vendor sub-ranges for my existing vendor in vendor master data. I've tested it out in one server and everything work just fine. Now I'm trying to do it for a different server. Here is what I tried before: 1. In IMG, I'v

  • GR posting via VL06IG

    Hi , I have got a situation, that when I create PO with account assignment catery as K or A with material short text and material group, create an inbound delivery (VL31N) and then go for posting the GR using VL06IG, I DO NOT get hte material documen

  • Updating CMS Node properties not working

    I have a pageflow controller that is fetching a node from the content management server, and updating a property on it. However, this value change is not being persisted... the next time I load the node the old value is still there and the modified t