How to use multiple proxies at the same time?

im planning to use multiple proxies at the same time on mac but i have no idea how to do it?!. i need help!thanks!

Similar Messages

How to use multiple languages at the same time for spell checking?

I use two different languages all the time and words are mostly so different (English and Finnish) that I could have spell checking on for both languages at the same time.
Now it seem to allow to select only one language at the time and I have to switch back and fort zillion of times per day.

Thanks for the quick answer.
The Dictionary Switcher doesn't seem to work with Finnish language, it doesn't detect it at all to be one of the choices although in the Firefox context menu Languages -> Finnish/Finland is shown.
Also, if it would work, I would need to get rid of multiple EN_* langauges. I just need EN_UK or EN_US, not all 22 different EN_*.
One option would be to create a custom dictionary, which would have words from both languages. The next task is then to find out how to make this kind of custom ENFI-dictionary, which would have words from both English and Finnish languages.
Finnish may be a some kind of special case for spell checking anyway, because the support is in its separate plugin:
http://voikko.sourceforge.net/

How to use multiple language at the same time

Hi,
I have one dimension, and its desc is in English,I had a need to have another language, so created one attributes "Language1"
and inserted Russian translation, But after uploading the data those russian characters are not getting identified by the system and it is showing "?" instead.
Any idea?
Thanks
Anupam

Do you have into .Net server Rusian fonts installed?
For example into your .NET server are the Rusian chars recognize?
Regards
Sorin Radulescu

How to use multiple Interfaces for the same BS?

Hi @ ,
Is it possible to have a scenarion where i am using multiple interfaces in the same BS based upon some conditional field in the message.
I amnot able to get the solution I know with condition editor I can have multiple receivers but in my scenarion based upon message fiels i have to decide which BAPI to be used and wht mapping and then post it to the same System
Any help will be highly rewarded
Regards

Hi-
Yes it is possible you can use multimapping for mapping the interfaces.
To know more about multimapping see
http://help.sap.com/saphelp_nw04/helpdata/en/21/6faf35c2d74295a3cb97f6f3ccf43c/content.htm
Some more helpful links
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible

How to support multiple users at the same time?

Hi all,
I have a Labview software which controls a analyzer via GPIB connector. When user A is using the software, user B has to wait until A is done. But actually, the analyzer is not very busy, when user A is using the software.
I want user A, B, C and D can use the software at the same time. just like we can open Multiple websites at the same time.
How can I program the software, so that the software can be open multiple times? Do you have any example?
Thanks a lot.
Steven
Solved!
Go to Solution.

Are all the users going to be measuring the exact same thing from the same instrument?
It would be possible to write a separate instrument server application that would handle all the direct interactions with the instrument. When one of the users needed to access the instrument, they would gain access to it through this server.
The big, Big, BIG caveat is that each interaction with the instrument would need to be atomic. In other words each access would need to configure the instrument, initiate the reading, report the results, and then reset the instrument back to some known default value.
As Dennis said, not a trivial process, but probably do-able...
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

How to display multiple reports at the same time

Hi,
I'm trying to display multiple reports at the same time, each one in separates tabs or windows using Forms 11g 11.1.1.6
I have a button which has a call to a procedure which makes use of rp2rro library to show the specific reports, for example:
call_report('report1');
call_report('report2');
call_report('report3');
call_report('report4');
The main problem is that, just the last report is been displayed.
Is there some way to display report1, report2 etc in separate tabs or windows ??
Regards
Carlos

You shouldn't have a problem calling different reports at once. As long as you're using Forms 11g they show up in different windows.
The question is how you are calling the report.
Here is how I manipulate it.
After I pass parameters with the ADD_PARAMETER built-in I set some key values (destype, desformat, desname) with the RP2RRO's procedures.
Finally calling RP2RRO.RP2RRO_RUN_PRODUCT and then WEB.SHOW_DOCUMENT passing the correct procedure parameters the report comes up in a window. If you repeat the above changing the appropriate variables (the report_name in the RP2RRO_RUN_PRODUCT and so on) you can get multiple reports in different windows.

In OEM 12c, how to manage multiple incidents at the same time?

Hi,
Is there a way to manage multiple incidents at the same time? For example, if I want to assign owner for multiple incidents in the incident manager, is there a way to do this? Thanks for the help.

This is currently not supported. This support will be available as part of the next patch set release.
Please note that you can use Incident rules to assign owners to incidents as they come in or get updated.

HT3529 How to delete multiple messages at the same time?

I'm new with and IPhone I try to delete multiple messages at the same time. and I can't find how to do this.

Email messages? Tap the edit button...tap each message you want to delete...hit delete...once in trash, tap edit, then tap delete all.

How to import multiple images at the same time in illustrator?

How to import multiple images in a document at the same time in illustrator?
It's possible?

Script: Place Multiple Files in Illustrator (Kelso)
http://kelsocartography.com/blog/?p=2047

How top open multiple forms at the same time in HRMS menu

Hi,
When enabling "Close Other forms" in HRMS menu by excluding the function ‘Navigator: Disable Multiform’ Function in the Responsibility Definition (System Administrator -> Security -> Responsibility -> Define), mutliple forms works fine but I'am facing another error.
My problem is: when this option is enabled, I tried to run Payroll run request but it turned out that payroll list of values is returning empty values and I'am unable to select any payroll from list of values. the only way to do so is to remove back ‘Navigator: Disable Multiform’ Function from exclusion section in responsibility.
My requirment is: to have multiple form and payroll run list of values working at the same time
Thanks

Reason for this , if ur request is attached to more than 1 responsibility , i think this issue will come , we got same issue
we remove it from responsibility list , then it is working fine

How to open multiple applications at the same time

I need to open several applications at the same time: Dreamweaver, BBEdit, and Acrobat. Is there a way to smooth this process, so pressing an icon in the dock will open them all for me?

You could create an applescript to do it.
tell application "Dreamweaver's Full Name"
activate
end tell
tell application "BBEdit's Full Name"
activate
end tell
tell application "Acrobat's Full Name"
activate
end tell
Replace the quoted text (leaving the quotes) with the full name of the application, and save the applescript as an application bundle, and put it in your dock.
NOTE: You may have to put the full path to the application for it to work (I.E. /Applications/Dreamweaver.app). If you do, encase the full path in quotes.
Good luck!
Message was edited by: joshz

How to use multiple profiles within the same instance of Thunderbird

About a month ago, I had Thunderbird configured with three profiles,
and all three could be used within a single startup/instance of
Thunderbird. That PC is now gone. I have re-configured the three
profiles on a new PC, but am having trouble making all three
useable within the same instance of Thunderbird. Can you help?
Both PCs are/were Windows-7 64 bit.

Thunderbird only opens on the default if one profile
or
if Profile Manager is instructed to ask at startup it will allow you to choose which Profile to open else it opens on the last Profile used..
So it shows one Profile at a time in one instance of Thunderbird.
However, one Profile can have many mail accounts.
eg: I run 4 mail accounts in one Profile.

How to use multiple instances of the same dll ?

Hi,
I'd like to use multiple instances of a jni dll . I have created
different threads, in each thread, I have called System.loadLibrary(..),
and I would like each thread to access a different instance of this
library.
Unfortunately, the loadLibrary function is effective only once so I
can not find the way to do this.
Can anyone help me on this ?
Thanks.
Francois.

Hi, :)
and I would like each thread to access a different
instance of this library.In Win32, this is outright impossible. A DLL will only exist once in a process space.
In Unix, or at least in Solaris, I think this is also not possible, as libraries are loaded by the dynamic linker, and it keeps tabs of which modules have already been loaded into the process space.
I'm assuming your problem is that your native library has non-reentrant code.
If so, there are two approaches you can take to this:
1) If you have access to the source code for the native library, change it so that it is reentrant.
2) If you do not, change your Java code so that access to the native code is made from whithin synchronize blocks.
If your problem is of a different nature, I'll second the words of the previous poster and ask you what it is...
Cheers,
J.

How to Modify multiple users at the same time.

Hi All,
I oversee a lab with 8 24" imacs running 10.4. Each machine has the same set of guest user accounts. The machines are not connected by a actual server, although I can dump files to a common folder. My problem is every time I want to make system pref changes I have to go into each user account to apply them, (i.e.,adding a new monitor profile). Any ideas or work-arounds out there?
Thanks
Phil

Hi Phil, and a warm welcome to the forums!
It's not clear if these are connected in anyway, but if they are, something like Timbuktu® Pro for Mac OS X, or ARD...
http://www.netopia.com/software/products/tb2/mac/
http://www.apple.com/remotedesktop/

CC can't use multiple languages at the same time

To change the language, reinstalling the program should be.
I want to change the language without reinstalling when i want
don't you have plans to support multiple languages?? i think it is necessary to non english-speaking world. plz

Hi CSI,
You can install in different languages
http://helpx.adobe.com/creative-cloud/kb/change-installed-language.html
Can you explain a little more about why being able to quickly change the installed language is important for you?
-Dave

How to use multiple proxies at the same time?

Similar Messages

Maybe you are looking for