How to use my recovery to re instill my sys?

hi
Dear ,
appreciate your efforts to help me as I faced some problem with my PC and as I dont have enough time to go to the Tochicha TS in our region and I asked our Company IT that I worked for to instill another Operation till I can go to the TS to fix this problem but still now I dont have the time to do that and I cant use the recovery to reset my PC to the first factory set with the original operation sys. that I used .
So My Question is :how to use my recovery to re instill my sys, however I used another version in my PC ,informing :
My lap top is:Satellite L655-18T
Operating system
Genuine Windows 7 Home Basic 32-bit (pre-installed, Toshiba-HDD recovery)
and I am using Windows 7 unlimited but not activated yet as I used my Windows 7 Home Basic serial to use it as a temporary solution .
thank You in advanced .
Ahmad

hi Paolo30 ,
You mean that I burn the HDD recovery on DVD and try to recover my Lap top operator Sys. from CD?
that is what I got .. confirm me this info if You don't mind and I want You to have a look about this Pic from my recovery folder to determine If I have the source or not .
thank You in advanced
>>>http://farm6.static.flickr.com/5094/5510804010_e908cd03c3_b.jpg
> > >

Similar Messages

How to use the recovery DVD's

Hello,
I have the Hp Pavilion Dv3-4305se, which has the Windows 7 home premium 64-bit Edition.
I have the revocery DVD's but i didn't know how to use them.
1-the F11 doesn't work. it doesn't give me HP recovry, it direct me straight to the users page.
2-when i used F9, it says that no Disc was found.
And those DVD's worked before, i tested them before i got them from HP supprt center in my country.
Please help.
Regards,

Hello,
Yes, i tried those steps before, but it doesn't work.
You need to know that my recovery partition stopped working, and i had to order the recovery DVD's.
And in the main while i installed a hacked Windows 7 proffessional instead of Windows 7 premium.
and the ive got 3 recovery DVD's each one is a CD of 8.5 GB.
I hope those informations would help you to understand the situation that i have been suffering from for 2 months eactly.
Regards,

NB500: How to use the Recovery DVD without a DVD drive in the netbook?

Background:
I have a Netbook NB 500 which came with a Win7 Starter. I upgraded to Win8 but didn't like it as the screen resolution wsn't high enough to open Apps. As the system became slower and slower over time, I decided to reset the unit back to original settings using the Win8 function.
The progress on this process was extremely slow and after seven hours (about 60% done) I got a fright that the content of my HDD might be copied somewhere onto the web (NSA cloud? :) ) .
I switched the unit off and from there nothing would work anymore. I bought recovery software with WIN7 Starter from Toshiba Support as I couldn't find an ISO file for WIN7 starter, but it arrived on a DVD...
I do have:
+ NB 500
+ Toshiba Recovery DVD
+ Bootable USB stick (I created this)
+ Product Key for Win7 Starter
Question:
What files are necessary in order to install Win7 from scratch (move files from DVD to bootable USB stick)?
Will this procedure delete the old data from HDD or will it still take up space?
Regards
LS1-d

It is not simply as you think it is. As far as I know you cannot manipulate recovery data and work on your own bootable media.
Best and simplest way for you is to obtain somewhere external USB ODD and use it for recovery image installation. I have NB520 and I have bought external BD ODD and can use it for different actions like software installation for instance.
Im really wondering you didnt create recovery USB stick. It was my first step after I bought this machine. Product key that you have on Microsoft sticker is useless. You cannot use it for OS installation if you use own OS version and you dont need it if you use original recovery image.
After recovery image installation preinstalled Windows version will be properly activated.
> Will this procedure delete the old data from HDD or will it still take up space?
Yes. The whole HDD will be deleted so before you start with recovery image installation back-up all your important data.

How to use Flash recovery area only for flashback database feature

I would like to use flash recovery area only for flashback database feature, which means, flash recovery area will store only flashback logs.
I dont want to use that file system for any other files, like archive log files, database backups, control file copies, multiplex redo log, etc
is it possible? I want to use this feature only for flashback database option and hence i dont want to disturb any existing configuration in my database
including backup jobs. Is it required to store archive redo log files also in flash recovery area to use the flashback database feature?
I certainly can't afford to have a copy of entire database in this file system as size of my DB is more than the flash recovery area file system I have.
Thanks
Sarayu

user13312943 wrote:
Aman,
I think i was not clear in my question. Let me try again
My only requirement is to use flashback database feature (or be prepared to use if required). I dont want to create a large file system to use this FRA to store all these files. Out of all the files being stored here copy of data files seems to be consuming more space. I see these files are classified as transient and permanent files. I am okay with permanent files. I fear that this file system may consume more space if i store backup files on disk. I want database backups to go to tapes, not to the FRA disk. Is it possible?
Thanks for your reply
Okay, well in that case you can use RMAN and push the backups to the tape drives. FLB logs would be stored on the FRA.
Aman....

How to use auto recovery from word 2011?

Hi
Yesterday I spent the whole day writing up a report for work to the point where I fell asleep last night with the document still opened. This morning I had a little more to do on it and when I tried to press save (like a did all day yesterday) it wouldn't save. I ended up just closing it down without saving because there was no point going on if it wasn't going to save any of my new stuff. So when I tried to open the file again it has reverted back to the document I started and saved over a week ago - MINUS ALL OF MY WORK FROM YESTERDAY!! I've tried finding it in my auto-recovery file but it is empty. What do I do?
These are possible issues that I think may stop me from finding the problem:
1. The document is saved on my USB
2. Microsoft Office wanted to update and I clicked not now as I was in the middle of this report.
Could these things affect my outcome?
PLEASE HELP!!!!

Could you please elaborate?
Is there a file in the Folder "PSAutoRecover" on your scratch disk?

How to use product recovery with external devices?

I have a Toshiba Satellite laptop and it just happens that I wanted to re-format my windows XP. But I realized that my CD drive isn't working anymore so I decided to hook my external CD burner to my pc.
When the laptop is on, the CD is well recognized from that source. But my problem now is that I can't find a way to boot the CD from the external CD drive (USB-Boot).
How do I do it? Or does anyone have a better solution for me to format my laptop given that the internal CD drive isn't working? (I've already tried in BIOS to get external devices as the first device to boot, doesn't work :-( )

Unfortunately dude... I have bad news for you.
The booting from the external USB CD/DVD drive is not possible. The BIOS don't support this functionality.
If you need to boot from the CD you will have to buy a new, compatible and supported internal CD/DVD drive.
Please note that not all slim line CD/DVD drives are supported due to the different master/slave/c-sel settings.
Usually the user manual should provide a information about supported CD/DVD drive.
If not, then ask the Toshiba authorized service provider for an compatible drive.
Best regards

I am unclear how I have to use the Recovery CD

I have added up all the space my hard disk is using it comes to about 12GB, I have 27.9 GB disk space but my disk only has 1.80 disk space left. I have done everything obvious to resolve this problem. Recycle bin is empty, I have run disk clean up.
A computer expert suggested that Windows could have become confused and cannot recognize what space I have spare, this could be because I have run a program called Cyberscrub often. His solution was to reload Windows XP home. My laptop came with recovery disks, everything else already loaded. I have so much I do not want to lose on my laptop. If I use the recovery disks, will I lose everything on my computer, am I best to buy Windows XP home and re-load, in which case will I not lose my work?
Also I am unclear how I use the recovery discs, I cannot find any instructions on what you do.
The one person who could help me has gone off traveling and not contactable.
Any help greatly appreciated
Lorraine Hart

Hello,
what kind of programs do you have on your harddisk? Maybe a little description of your System will help us further. You mentioned, that you have a Program called Cyberscrub. Is this Program showing you your diskspace? Check this out! This program is, as i know, usually intended to wipe harddisks or files.
Maybe you can try some Registry cleaner that cleanes out some information which is showing you wrong information that is corrupted by Cyberscrub. Maybe this helps.
Another suggestion: run the program "chkdsk". This program will check out your filesystem on errors. Maybe it can fix that problem. You can run this program with right-clicking on the symbol of your systemdisk, clicking on "extras" and choosing the "Checking on errors" or something like.
At all events, when this fails, then you dont have to buy a new XP Home. You dont need it because you have already one on a recovery cd, and you can solve that easily.
You have to write down which programs you have in your system and backup your important data with a backup program or just burn it to a dvd or cd. You have the option to put the whole system on a mobile Harddisk connected over USB. This means backing up your system to this harddisk.
After that, you have to boot with the recovery-cd, by pushing the "c" button at boot time.
Then you follow the instructions and reload the "factory-like-installed" Windows XP on your Harddisk. Dont forget: all your data on the system disk will be erased, and the corrupted information of the free diskspace too. After that you just put the backup of your data back to your systemdisk and reinstall the programs you noted before the re-install of your system. Then the system will be clear again.
Let me know about the activity of your problem.
Greets

How do i use the recovery disks and backup and restore my laptop in a new HDD without losing OS lic?

I am running a HP-DV6 6090ee laptop with windows 7 Home Premium 64bit OS. This problem started from last evening.
I am getting a "Smart Hard disc error" error message before boot and ater booting windows saying that my HDD is having problems and i need to backup and check the hdd.
After checking i found that i have a corrupted hdd and i am going to replace with a new one.
I need to know the following :
> How do i restore my windows license and my antivirus license in the new hdd?
> i dont currently have a OEM HP OS cd. can i use any windows 7 cd??
> at what stage should i use the recovery disk i created from the recovery partition be used? Whats its specific use?
I really appreciate any quick response as my current HDD is running out of life.
Regards
A

See these 2 Links...
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991

How can i reformat my harddrive using the recovery disk stored in partition drive?

hi guys! i need help. i need to reformat my harddrive and i will do this for the first time. however, i was not ablt to make the recovery disk since i purchased the tx2 1275dx laptop last july 2009. what i have is a recovery disk stored in a partition harddrive. how can i reformat my cpmputer using the recovery disk in partition harddrive? my OS is windows vista. thank you...

Hi,
Shutdown the notebook. Tap away at f11 as you start to access Recovery Manager which you can then use to reinstall the Operating System.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How to use recovery dvd on new hard drive, install window 7

hello, i have trouble with my laptop. my hard drive got bad sectors and now i need to replace my hdd to new one. im not sure how to reinstall window 7 on my new hdd.
is it possible to install operating system on new hard drive using recovery disk? and how?

Hi,
Yes, recovery discs will work on a new hard drive, but it's generally best to ensure that the replacement drive is of the same capacity ( slightly larger is Ok ) as the original - recovery discs can have issue when used on a drive that has a smaller capacity than the original.
When you have replaced the HDD, all you need to do is as follows.
Tap away at the esc key as you start the notebook to enter the Start-up Menu.
Insert the 1st Recovery Disc.
Select Boot options ( f9 ), use the arrow keys to select the CD/DVD drive and hit enter. You may also get a prompt to 'Press any key to continue' - do this if asked.
You will be prompted to insert subsequent discs as required.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How to use the rescue and recovery, and the product recovery discs ?

Hi everyone,
I've just recently became a new owner of a T61, and really enjoying it. I haven't had a chance yet to test-drive the lenovo phone support, as I have not yet screwed anything up that bad that required their help. I did try a clean factory reinstall from the service partition and it worked great. I would like to find out, how does one use the rescue and recovery startup disc, and the product recovery discs that I created myself? From my previous experience with Dell and HP, I only had to insert the first one and restart the computer, and the rest followed. But with ThinkPads, if I ever wanted to bring it to a clean factory state using those discs, do I use rescue and recovery first, followed by the product recovery? I'm curious, what is the difference between the two?
T61 (7658CTO), T9300, 3GB, 250GB, XP Pro
Solved!
Go to Solution.

blake_ibm wrote:
Hi! I'm blake
There is no diff between the two... One is on the Hard Drive and the other on CD/DVD.
Having the HDD version (pre-installed) is a good for trouble shooting. It uses a whole diff O/S on a whole diff partition (not C.
So if you are having problems and boot to RnR (via F11), and those problems go away. you know your issue is software related. If you still have the same problems probly Hardware related... IT IS AN EFFECTIVE WAY TO TAKE WINDOWS OUT OF THE PROBLEM.
Other then that. You can re-image another HDD from disks, you can't do that with the F11 version.
dose all that make sense?
Hi blake_ibm,
Thanks. All this makes perfect sense to me, but that's not what I'm asking for. My question is this: if I wanted to bring my notebook to its factory shipped condition using my recovery cd's, how do I do that? Do I insert cd1 first and then restart the notebook, or do I just insert it without restarting it, or perhaps I should use first the rescue and recovery?
You said that there is no difference between the two, but what two are you talking about man? I am not comparing cd recovery to partition recovery. I am talking about rescue and recovery cd, with system recovery cd's. These are the two things that I'm talking about.
I'm really grateful for all replies, but please people, read the question first !!!
I would really appreciate if someone could explain the steps involved in performing a clean factory recovery, using the cd's, and not the recovery partition. I just want to know for the future, in case one day I have to do it. That is all I'm asking.
T61 (7658CTO), T9300, 3GB, 250GB, XP Pro

Satellite A45-S250 : How to use Recovery CD if DVD Drive is not working

Hi all ,
First , appologize for my english , i'm a french guy :)
So my problem is that i would like to re-install everything on a A45-S250 by using the recovery CD.
But the main problem is that the internal DVD drive is not running anymore.
I've try by plugging an external DVD drive, but the laptop don't want to boot on it.
I've seen that it can boot through a floppy drive, lan, or SD card. But with theses possibilities , how to be able to reinstall everything include in the recovery CD ?
I may have a usb floppy drive, so i'll be able to boot on a disk boot. but then how to start the recovery CD procedure ?
I'll prefer to use the recovery CD as a WinXP home standart, cause i know that the OEM serial won't work to a Original version of WinXP ...
Thanks for your help !
Kubs

Hi
If you want to use the Recovery CD then you would need a bootable CD/DVD drive.
Fact is that you would be not able to boot from a USB CD/DVD drive or its not possible to copy the whole stuff on the SD card and then to boot
You need an internal CD/DVD drive or external CD/DVD drive which could be connected to the PCMCIA port
For me only these two possibilities could work!

I'm trying to use Internet recovery feature to reinstall osx lion how do I go about that?

How do I use Internet recovery feature to reinstall osx lion?

Restart with the COMMAND+OPTION+R keys pressed and held until you see a spinning globe. This boots into Internet Recovery and the Apple servers. You can then download/install the most current version of OS X that was pre-installed on your Mini.
To restart into the Recovery HD, press and hold the COMMAND+R keys until you see the Apple logo. This boots into Recovery Mode from your internal drive's Recovery HD. You can then download/install the most current version of OS X that is installed on your Mini.

How incremental backup is used in recovery

Hi,
how incremental backup is used in recovery let's say i took full backup on sunday then monday tuesday, wednesday took incremental backup. now on wednesday DB crash. so how incremental backup will use in recovery as i understand DB will restore from full backup then archive and increment backup will apply for recovery?
please correct me if i am wrong.

1) Backup FULL RMAN Level 0 - Sunday
2) Backup FULL RMAN LEVEL 1 (incremental) - other days
3) Backup Archives
Restore Level0 + Restore Level1 + Apliying Archives and recover database;

How to recover using lion recovery disk assistant IN MAC MINI

how to recover using lion recovery disk assistant IF MY KEYBOARD AND MOUSE DOEST NOT WORK DURING BOOTING ?

Hello:
If my memory serves me correctly, the licence agreement that comes with a new system indicates that is good for one system....
Also, I do not think that something that would boot one type of processor would work on a different type.
Barry

How to use my recovery to re instill my sys?

Similar Messages

Maybe you are looking for