How to use ni-6008 and build a four channel data acquisition at a rate of 250 samples per channel and display all the data in a waveform chart

how to use ni-6008 and build a four channel data acquisition at a rate of 250 samples per channel and display all the data in a waveform chart 

Hi kdm,
please stick in one thread for the same topic!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Similar Messages

  • All the data on my Ipad3 is wiped out. is it possible to delete all the data from my ipad if somebody knows icloud-ID and password

    All the data on my Ipad3 is wiped out. is it possible to delete all the data from my ipad if somebody knows icloud-ID and password

    It sounds like a remote erase was sent via 'Find My Mac', to check please go to www.icloud.com and login. Is there any data there?
    If it was a remote erase only someone who had the ID and password could have done it. And in that case the data is gone, it is not recoverable I'm afraid.

  • I installed Firefox 4 on my new computer and am getting a banner on some web pages stating "Additional plug ins are required to display all the media on this page - I haven't had this problem until today; I have been using Firefox on my Macs for years.

    I just bought a new MacBookPro to replace my 3 year old MBP. I was not receiving the banner when I was on my old Mac running Firefox 3.6.16.
    The yellow banner seems to appear randomly. I got it when I went to https://artistsnetwork.tv/e-myvideos.aspx and https://bit.ly.com but not when I went to Hootsuite, Twitter or textbroker.com.
    There is an "Install missing plugins" button on the right side, but I'm afraid to click on it since I don't understand what might happen to my new computer.

    I just bought a new MacBookPro to replace my 3 year old MBP. I was not receiving the banner when I was on my old Mac running Firefox 3.6.16.
    The yellow banner seems to appear randomly. I got it when I went to https://artistsnetwork.tv/e-myvideos.aspx and https://bit.ly.com but not when I went to Hootsuite, Twitter or textbroker.com.
    There is an "Install missing plugins" button on the right side, but I'm afraid to click on it since I don't understand what might happen to my new computer.

  • How to use JavaBean in Form Builder 6i

    Hi,
    How to use JavaBean in Form Builder 6i (Oracle Developer 6i)?.
    i'am using Oracle Sever 8.0.4 and Oracle Developer 6i.
    Please give your valuable suggestion
    Regards
    Seema

    I would suggest you start with the sample Java bean code we have
    on otn.
    http://otn.oracle.com/products/forms
    go to the sample code section.

  • I upgraded to IOS 7 and now I can't get my Hotmail account on my phone.  When I type in all the information, I get "Unable to Verify Account Information".  How do I get to use my Hotmail account using this software????

    I upgraded to IOS 7 and now I can't get my Hotmail account on my phone.  When I type in all the information, I get "Unable to Verify Account Information".  How do I get to use my Hotmail account using this software????

    I have had the same problem as yours on my Ipad after upgraded Procreate 2.01. My iOS is 7.04. I tried to find solution from internet for weeks. Fortunately, the problem was resolved a few minutes ago. It is very simple,
    1. Lunch outlook.com to confirm you can access hotmail mailbox. It means your account is Ok.
    2. Go to setting>Mail,Contacts,Calendars.Delete your hotmail account from your device.(my device is Ipad)
    3. Turn off your device, then turn on again.
    4. Go to setting>Mail,Contacts,Calendars and create your hotmail account by tap outlook.com. Be sure the incoming mail server is pop3.live.com.
    5. Waiting for validation.
    That's all. Hope my experience is helpful. Good luck!
    Nelson

  • I have installed the latest version of iOS in my ipad but forgot to backup the content, what should i do!!! I don't want my media and other data erased, how can i find back all the data in my ipad? I haven't restore ipad yet, so any others way can be use?

    I have installed the latest version of iOS in my ipad but forgot to backup the content, what should i do!!! I don't want my media and other data erased, how can i find back all the data in my ipad? I haven't restore ipad yet, so any others way can be use? Now my ipad is in recovery mode.

    Once you are in Recovery Mode, it's too late to do any backup. I am afraid you are going to lose your data.

  • HT1766 I have an iphone 4.I upgraded it to 5.0.1 and so I have lost all the data from my iPhone,but i have a backup in my computer.How do I use the backup file ? i.e How will i get that backup file in my iPhone ?

    I have an iphone 4.I upgraded it to 5.0.1 and so I have lost all the data from my iPhone,but i have a backup in my computer.How do I use the backup file ? i.e How will i get that backup file in my iPhone ?

    Connect phone to computer.
    Select Restore.
    Tell iTunes which of the available backup files to use, let iTunes restore it.
    Also, try reading the User's Guide as it answers questions like this.

  • My friend borrowed my old iPhone 4. I wanted to erase all the data but I dont have a password and my friend doesnt know his password. How can I erase the data without using a password?

    My friend borrowed my iPhone. I want to sell the iPhone, but first I have to erase all the data that belong too my friend. I don't know his password and he doesn't know either. Is it possible to erase the data without using a password?
    thanks!

    You need the password if it is iCloud locked you won't be able to activate the phone for use.
    As long as he remembers his email,  you can reset the password
    If you forgot your Apple ID password
    or Forgot Apple ID
    https://iforgot.apple.com/appleid
    If it is a lock screen password, you can do a restore.
    Hold down power and home for 10 seconds and release power but keep holding down home. iTunes will say your phone is in recovery mode so you can restore it.

  • How to retrieve all the data from a BLOB using view-generated accessor

    I am using JDeveveloper 10g v. 10.1.3 and am storing an image in a database as a blob object and need to retrieve all of the data to get the entire image and store it in an ImageIcon. The code I have works partially in that it retrieves the correct data, but only gets a piece of it, leaving me with a partial image.
    AppModuleImpl am;
    ImageVwViewImpl vo;
    am = (AppModuleImpl)panelBinding.getDataControl().getDataProvider();
    vo = (ImageVwViewImpl)am.findViewObject("ImageVwView");
    ImageVwViewRowImpl ivo = (ImageVwViewRowImpl)vo.getCurrentRow();
    ImageIcon icon = new ImageIcon(ivo.getImage().getBytes(1, (int)ivo.getImage().getBufferSize()));
    jULabel1.setIcon(icon);I either need to know how to use a stream to get the data out (from BlobDomain method getBinaryStream()), or how to get the other chunks of data separately.
    edit: I know the problem is that getBufferSize() returns an int which is too small to hold all the data, but need to know what to use instead. Thanks!

    This is the code I'm using now. Same problem :(
    AppModuleImpl am;
            ImageVwViewImpl vo;
            am = (AppModuleImpl)panelBinding.getDataControl().getDataProvider();
            vo = (ImageVwViewImpl)am.findViewObject("ImageVwView");
            ImageVwViewRowImpl ivo = (ImageVwViewRowImpl)vo.getCurrentRow();  
            ImageIcon icon = new ImageIcon(ivo.getImage().toByteArray());
            jULabel1.setIcon(icon);

  • I have 2 iphones, one for personal and one for business.  I need my phones not to sync otherwise they will both ring all the time.  How can I log out of my icloud and unsync my phones?

    I have 2 iphones, one for personal and one for business.  I need my phones not to sync otherwise they will both ring all the time.  How can I log out of my icloud and unsync my phones?

    Syncing your phones to the same iCloud account won't cause them to both ring all the time, it only puts the same contacts, calendars, and other synced data on the phone.  The phones will only ring with someone calls the number associated with the phone.
    If you want to stop using iCloud on one or both of the phones, go to Settings>iCloud, tap Delete Account, then choose Keep On My iPhone when prompted.  This will disconnect them from iCloud and keep a copy of the synced data on the phone.

  • My Iphone was sync with Itunes on a computer then this computer broke down and i purchased another one. I was able to extract all the data from the old one. now how can i sync my phone with the new tunes without loosing any data?

    My Iphone was sync with Itunes on a computer then this computer broke down and i purchased another one. I was able to extract all the data from the old one. now how can i sync my phone with the new tunes without loosing any data?

    Yes, windows to Mac too.
    iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    Quick answer if you use iTunes' default preferences settings:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.
    Windows users see tip at: https://discussions.apple.com/message/18879381

  • I lost my iphone in the woods and it is not connected to the internet. how can i trace it? and if i cant, can i take all the data, such as pictures from my old phone onto a new one?

    so i was walkin in the woods and somehow i droped it. its not conected to the internet. i know because i checked icloud. when i walked around to look for it i used a friends phone to call it so it would ring, but it went straight to voice mail.
    So, how can i trace it? and if i cant, can i take all the data, such as pictures from my old phone onto a new one?

    if you installed find my iphone app on it you can do these things from icloud if it's online
    if not you can't do anything

  • How to use evdre to display all the levels under the node user choose

    I used SELF,LDEP(6) in the memberset of evdre trying to display all the 6 levels from the top node of NetIncome, all the display all the level with the correct amount except the top node which is displayed in the row key, but all the cell which should be the aggregation of all it's children is blank, if I choose only self, it shows the amount with only top level. how could I all the level and the corresponding amount display?

    Hi,
    Did you try SELF,ALL ?
    Hope it works...
    regards,
    Raju

  • If my iphone got stolen but is still under waranty can i get a new one? and how do i wipe all the data off the iphone

    my phone doesnt have a lock on it and i want to wipe out all the data. how do i do that?

    Use Find my IPhone on either iCloud, MobileMe or any other idevice. That is assuming you activated Find my iPhone on your phone. You can remotely lock it and see its location on a map.  You can also remote wipe it but BEWARE you will not be able to track it once you have wiped it.

  • How to display all the surveys using content query web part

    Can you please tell me how to display all the surveys using content query web part in more details? I also created a subsite and multiple surveys in that site. Then, I inserted a Content Query Web Part and select the List Type to be "Survey",
    however, it returned nothing. Did I miss anything?

    Hi,
    OOTB Survey List does not contain any
    Content Types and it has the following structure:
    Response entry is represented by
    List Item
    Response entry consist of questions and answers, where Question correspond to
    Field and Answer to Item value respectively.
    For querying Survey List via CQWP  the following properties could be used
    BaseType 
    <Lists BaseType="4">
    ServerTemplate
    <Lists ServerTemplate="102">
    Example
    To retrieve all the responses from Survey lists, specify List Type property as shown on picture
    Reference:
    http://stackoverflow.com/questions/17280778/display-all-surveys-using-content-query-web-part
    Best Regards,
    Eric
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

Maybe you are looking for