How to use one wallet for both infrastructure & midtier installations?

I have a 10.1.2.0.2 Portal installation that also includes the metadata repository & other infrastructure components on the same server. I need to configure SSL throughout Portal and I have 1 server certificate that I installed in Oracle Wallet Manager in the infrastructure home. Can I use this same certificate for the midtier without installing it in the midtier Wallet Manager?
Thanks,
Denise

From one Directory Server (ds1) generate CSR with the name ds.example.com in the request. Once you get the signed cert import it into the same server you generated CSR with. Then from ds1.example.com :
scp -p <slapd install/instance path>/alias/* <account>@ds2.example.com:<slapd install/instance path>/alias/
to copy the contents of the alias path to the same location on the other Directory Server. Make sure file permissions are the same.

Similar Messages

Can I use one account for both my labtop and my ho...

can I use one account for both my labtop and my home computer?
Solved!
Go to Solution.

Softthunder wrote:
can I use one account for both my labtop and my home computer?
Hello,
Yes you can. You can access your account using any Skype enabled computer/device in any country worldwide.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Any idea how you can safely use ONE computer for BOTH work and internet?

I'm planning to set up a small music project studio, built around a powerbook, that I will be sharing with a friend of mine. My friend is going to use the computer for music AND heavy internet use, but I will only use it for music work (off-line).
The thing is then that I am slightly worried about viruses, worms, spyware and similar unwanted stuff 'sneaking in' when the laptop is online. Even with firewall and anti-virus I guess there is always a risk.
Any idea if there is a way of keeping things completely separate?
How about if I had a bootable external hard drive for my work, with the Mac OS system on. Then when I'm working I could boot up from that drive (and use the computer off-line).
Maybe we could even remove the internal hard drive from the powerbook (?), and use the powerbook with two external hard drives instead: One bootable drive for me and another bootable drive for my studio partner (and then only connect one hard drive at the time).
Any idea if this would work well..? (I'm not sure if i.e. a virus could sneak in anyway, through the PRAM, L2 cache or the RAM or something similar) Or does anyone have any other suggestions...? Any ideas much appreciated. Thanks!

Not too much worry with Macs, but get an Ethernet Router, skip Wireless, use strong Passwords.
How about if I had a bootable external hard drive for my work, with the Mac OS system on. Then when I'm working I could boot up from that drive (and use the computer off-line).
Excellent idea, especially if the heavy Net user doesn't have Admin rights.
One bootable drive for me and another bootable drive for my studio partner (and then only connect one hard drive at the time).
Just about foolproof! Just need 2 more drives for backup. Not sure why you'd want to remove the internal HD though.
No Viruses yet in OSX land, in fact the only Malware I know about requires you to install it for itself!
You'll be OK, that separate drives idea is pure genius.:-)
Most don't need it on Macs, but here ya go on the Mac side...
ClamXAV, free Virus scanner...
http://www.clamxav.com/
Little Snitch, stops/alerts outgoing stuff...
http://www.obdev.at/products/littlesnitch/index.html
HenWen/Snort combo, that is a free MAJOR Firewall...
http://seiryu.home.comcast.net/henwen.html
Then the venerable old Brickhoues/Flying Buttress Firewall...
http://personalpages.tds.net/~brian_hill/downloads.html
WaterRoof is a firewall management frontend with bandwidth tuning, NAT setup, port redirection, dynamic rules tracking, predefined rule sets, wizard, logs, statistics and other features.
http://www.macupdate.com/info.php/id/23317
Monitor net usage...
http://mac.softpedia.com/get/Dashboard-Widgets/Information/Videotron-Internet-Us age-Monitor.shtml

How to use one SessionInfo for many Frame

Hi Sathish;
thank's for your answer but How do this?
thank you

I use one sessionInfo on the base frame and then pass it to child forms in constructor.
You then have to correctly set the bind names for all controls on the child forms.
The truth is that yes, this way you loose the design facilities but I use a simple trick:
I also have sessionInfo objects on the child forms and let the designer generate as much as I can get from it and then I adjust the code so that it uses the base sessionInfo.
Easy uh ?

How to use one URL for several Oracle AS?

Hi folks,
how do I use one URL to access several application servers (i.e. for different applications).
Example:
We have one URL:
www.test.com
In our DMZ, wie have three application servers and one web cache:
test1.intranet.com:7777
test2.intranet.com:7777
test3.intranet.com:7777
webcache.intranet.com:8000
One application server is no problem. In Web Cache, i just map site www.test.com:443 to AS test1.intranet.com:7777.
But what is the correct setting, to access all three Oracle AS over one URL? I tried URL PATH Prefix. Then i am able to access all three Oracle AS, but the application server does not know the Path.
Example for mapping:
www.test.com:443/server2 -> test2.intranet.com:7777
When I access www.test.com:443/server2, I get redirected to the correct AS (test2.intranet.com:7777), but the Oracle AS does not know the path /server2.
How do I have to configure the Oracle AS?
Thanks in advance and best regards.

I setted up a proxy and at first glance,
it works fine. The problem are internal links. Some links redirect to the
machine name, which is of course not accessible from outside our dmz.
My httpd.conf entries:
ProxyPass /test1infra/ http://test1.intranet.com:7777/
ProxyPassReverse /test1infra/ http://test1.intranet.com:7777/
ProxyPass /test1mid/ http://test1.intranet.com:7778/
ProxyPassReverse /test1mid/ http://test1.intranet.com:7778/
When I now access (for example) www.test.com/test1infra/pls/orasso I get
redirected to www.test.com/pls/orasso, which is another Oracle AS!
How can I prevent my OracleAS doing this? It has to "know" that all its internal urls need a url path prefix.

How to use form design for both online and Offline Scenrio!

Hi All,
I have created the forms using WebDynpro context with ZCI layout for Online scenario.
There are some fields which need to be prefilled and are read only.. Header fields.
There is no interface structures created seperately but the interface is constructed through webdynpro context.
Now that I have to use the same for offline scenario, I don't see layout in SFP of form. I can create a structure for Importing fields but there is no Layout for mapping?
Do I need create seperate forms for this as I have some prefilled hedaer fields which I can't pass using download beacause there is no context design available for this?
Regards,
Srinivas

you could either create a separate form for your offline form using Data Dictionary interface or use the Data Dictionary interface for both of your forms.
You do have the option of creating your own XML file for your offline form - you may be able to copy the XML code out of your online interface, save it to a file and use that for your offline interface - i'm not 100% sure on this as I've never done that.

Using one email for both husband and wife, how can we FaceTime each other

My husband and I share an email account and Apple ID How can we FaceTime each other since it seems to be based on our shared identity? I am on a MacBook and he is on an iPad 2.

have to use a different apple id. sorry
Peace, Clyde

How to use one certificate for two directory servers?

Hi,
running Sun DSEE 6.3.1 on two servers, server 1 has name ds1.example.com, server 2 has name ds2.example.com. There is a round robin DNS record ds.example.com, which alternates between:
ds1.example.com
ds2.example.com
and
ds2.example.com
ds1.example.com
An LDAP client connects to one of the servers over SSL using the name ds.example.com. We want to generate a certificate using the name ds.example.com and use it on both directory servers.
If we generate a CSR using DSCC on server 1 and get back a signed certificate, the certificate can be installed correctly on server 1. However, if we use the same signed certificate on server 2 it fails with error:
Unable to find private key for this certificate.
Failed to add the certificate.
Error executing the operation. The error code is 11.
What is the correct way to generate one CSR, have it signed by a CA and then implement this signed certificate on multiple servers?
/rolf

From one Directory Server (ds1) generate CSR with the name ds.example.com in the request. Once you get the signed cert import it into the same server you generated CSR with. Then from ds1.example.com :
scp -p <slapd install/instance path>/alias/* <account>@ds2.example.com:<slapd install/instance path>/alias/
to copy the contents of the alias path to the same location on the other Directory Server. Make sure file permissions are the same.

How to use one NIC for everything and the other to allow ssh from

Hello,
I have two internet connexion at home:
- a cable connection (CABLEBOX) that i use for all of my devices as it's the fastest. All my computers are connected to it using ethernet or wifi.
- an adsl connection (ADSLBOX) that is connect to the second network card of one of my computers (MEDIABOX) only and that i want to use only to ssh that same device from the outside
I want that specific computer to use its:
- NIC1 to connect to the LAN and to the internet. Routing is enabled on CABLEBOX.
- NIC2 to connect to that device from the outside using ssh. ssh-D should also work through NIC2 as i need to be able to use that computer as a proxy on some occasions. Routing is enabled on ADSLBOX and it's set to port forward the port 22 to MEDIABOX.
Once this will be working i'd like to also route ftp connections to specific ips by NIC2.
No firewall is set on MEDIABOX yet, i'll do it later on.
I know basics on how to set routing rules, how to assign a specific LAN to a network card but i have a hard time on deciding which rules i should set...
Can someone guide me?
Thanks in advance
Last edited by parpagnas (2013-12-03 18:31:31)

A possible solution might be this.
On ADSLBOX and CABLEBOX configure different subnets for the LAN, e.g.
ADSLBOX: 192.168.1.0/24
CABLEBOX: 192.168.2.0/24
The MEDIABOX gets these static IPs:
ADSL-LAN: 192.168.1.2
CABLE-LAN: 192.168.2.2
On the MEDIABOX, configure the two network interfaces using two routing tables.
The ADSL-LAN routing table
ip route add 192.168.1.0/24 dev eth0 src 192.168.1.2 table 1
ip route add default via 192.168.1.1 table 1
The CABLE-LAN routing table
ip route add 192.168.2.0/24 dev eth1 src 192.168.2.2 table 2
ip route add default via 192.168.2.1 table 2
The main routing table
ip route add 192.168.1.0/24 dev eth0 src 192.168.1.2
ip route add 192.168.2.0/24 dev eth1 src 192.168.2.2
# use the CABLE-LAN gateway as default, so general internet traffic from MEDIABOX runs over CABLEBOX
ip route add default via 192.168.2.1
define the lookup rules
ip rule add from 192.168.1.2 table 1
ip rule add from 192.168.2.2 table 2
To test the setup:
ip route show
ip route show table 1
ip route show table 2
I don't know how to persist something like this in ArchLinux using netctl. Might require to write a special systemd unit for it. Above is a working example from a RedHat box at my company.
Last edited by teekay (2013-12-04 07:42:22)

How to use one variable for 2 datatype inside class

Dear all
i have create 2 class GDI and OGL need use use in M_VIEW as per condition
in the class M_VIEW (example below)
#define M_FLAG 1
class GDI {public: int z;};
class OGL{public: double z;};
// in class M_VIEWi need to use GDI or OGL as per user condition
class M_VIEW{
public:
#if (M_FLAG == 1)
GID UseThis;
#else
OGL UseThis;
#endif
this is work but it always it take OGL. of if i change condition it take GDI only. but i need to use it runtime as per user choice.
how to switch GDI to OGL, and OGL to GDI on runtime ;
is that possible to change M_FLAG value on run time or is there any other way to achieve it.
i have try with polymorphism also. switch is ok but all function does not work with dll. when call function on mouse move or some other event it take base class virtual function. it doesn't goes to derived class function. don't know why?
base class function like this and does not have any variable. all function are virtual.
virtual void MoveLine(POINT pt1, POINT pt2){};
virtual void DrawLine(POINT pt1, POINT pt2){};
please help.
Thanks in Advance.

Well, #define, and #if are compile time only constructs. Technically they are processed before you program is compiled (that is why they are called preprocessor directives). If you need to support both flavors at runtime you will need a different
approach.
Inheritance/polymorphism could be a good approach here, but I don't really understand what you are trying to do well enough to say for sure. Based on guesses about what you want, here are some thoughts.
class GDI {public: int z;};
class OGL{public: double z;};
class M_VIEW_BASE {
virtual void MoveLine(POINT pt1, POINT pt2) = 0;
virtual void DrawLine(POINT pt1, POINT pt2) = 0;
class M_VIEW_GDI {
GDI UseThis;
void MoveLine(POINT pt1, POINT pt2) override {}
void DrawLine(POINT pt1, POINT pt2) override {}
class M_VIEW_OGL {
OGL UseThis;
void MoveLine(POINT pt1, POINT pt2) override {}
void DrawLine(POINT pt1, POINT pt2) override {}
std::unique_ptr<M_VIEW_BASE> drawBase;
enum DrawMode { DrawGdi, DrawOgl };
extern "C" __declspec(dllexport) void Init(DrawMode whichMode) {
if (drawMode == DragGdi) {
drawBase.reset(new M_VIEW_GDI);
} else if (drawMode == DrawOgl) {
drawBase.reset(new M_VIEW_OGL);
} else {
throw std::runtime_exception("whoops");
extern "C" __declspec(dllexport) void MoveLine(POINT pt1, POINT pt2) {
drawBase->MoveLine(pt1, pt2);
extern "C" __declspec(dllexport) void DrawLine(POINT pt1, POINT pt2) {
drawBase->DrawLine(pt1, pt2);

PC & Mac Sharing 1 Monitor and KB Setup - How to use KB/Mouse for both?

I am purchasing a Mac Mini to replace my personal computer. I have one monitor/KB/mouse setup shared between my work and personal PC, switched back and forth via a USB KVM switch (http://www.iogear.com/product/GCS632U/)
I want to go with the Apple bluetooth mouse and keyboard with the purchase of my mac mini, but how can I make it so it will work with both my work PC (Windows XP Dell laptop docked) and my new mac mini?
Should I purchase a USB bluetooth dongle and connect that to the mini KVM switch? Or should I just plug the USB dongle into my docked laptop and pair with both the mini and the PC (if pairing to both is even possible)?
Thanks in advance.

If both are on your intranet, try Synergy.
I personally use the Wormhole. You can drag between desktops.

How to use one button for mltiple task?

hi, every body,
how do i get one button to do mitple tasks,for example
i have one button called(+), i'd like it to do addition and get the answer,in other word:
1-press any number, called it 1.
2-press the (+) button to add previous number.
3-press anthor number, called it 5.
4-again press the (+) button to add two numbers(1+5)and show the answer(6) .
5-again press anthor number called it 4.
6-press the (+) button again ,to add previous result(6) to current number(4)and show the answer that is(10) and so on...

sorry for being late here is the code
import java.util.*;
import java.awt.event.*;
import javax.swing.*;
import java.awt.*;
import java.io.*;
public class Calc2 {
private JTextField d1;
private JFrame frame;
private int a,s,sum;
public static void main (String[] args) {
Calc2 g = new Calc2();
g.go();
} // close main
public void go() {
frame = new JFrame("Simple");
Panel mainPanel = new Panel();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
Font bigFont = new Font("sanserif",Font.BOLD,24);
d1 = new JTextField(10);
JButton b = new JButton("+");
b.addActionListener(new AddListener());
mainPanel.add(d1);
mainPanel.add(b);
frame.getContentPane().add(BorderLayout.CENTER,mainPanel);
frame.setSize(500,600);
frame.setVisible(true);
}//close go()
public class AddListener implements ActionListener {
public void actionPerformed(ActionEvent ev) {
String x = d1.getText();
s = Integer.parseInt(x);
d1.setText("");
d1.requestFocus();
String z = d1.getText();
a = Integer.parseInt(z);
sum = a + s;
//Now how to keep track of a sum variable, and a currentValue variable.
d1.setText(Integer.toString(sum));
}//close inner
}//close class

How to use a object for both key figure and as a charcteristc

Dear all,
we have a requirement where in we have to use Version Field as a key figure and as well as a charecteristc.
Regards
venu

Dear Mayank Gupta
Thxs for ur reply
We are creating a EBIDTA Report which is already developed in R/3 and these result will be stored in Z table.
we have created a DSO which will store this Z table data.
Now the req is we have a created a field called ZVersion which is there in the Key fields of DSO. ok
But in report we want to use the condition TOP1 on the version. as the version is a not a key figure we cant create the Conditon on the characteristc.
If we use version as a key figure then the records are summurised in DSO as u have to insert it in Data Field.
we want to use version as a primary key.
so how to go abt it?
regards.
venu

To use one SessionInfo for multiple frames

how to use one SessionInfo for master frame and other frame the detail
Thanks for your reply.

You can instantiate the SessionInfo and other dataproducer objects in frame1 and bind them to controls in the first and second frames.
If you plan to change/execute queries pass the sessionInfo instance to the second frame.
Hope this helps.
Sathish
null

One RTPManager for both, receiving and transmitting

Can I use one RTPManager for both, receiving and transmitting media data?
I would create send stream and imlement appropriate update+ methods.
Will it work?
Regards!

Ummm, you don't have to implement any methods if you don't want. The default RTPManager does it all for you. I think you may want to override some trigger functions, but...
[http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/AVTransmit.html]
[http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/AVReceive.html]

How to use one wallet for both infrastructure & midtier installations?

Similar Messages

Maybe you are looking for