How to use Oracle SQL Developer 4.0 to connect to Ms Access file with .accdb extension

Hi all,
I am using Oracle SQL Developer 4.0 and Ms Access 2013 under Windows 7 (64 bits)
After browsing and selecting MS Access file with accdb extention, I got an error message :[Microsoft] " Data source name not found and no default driver specified".
On Administravitve Tools=> ODBC Data Source Administrator=>Drivers I have                                                File                                date
Name :                                                                               Version
Microsoft Acess Driver (*.mdb, *accdb)                                 12.00.4518.1014                                        ACEODBC.DLL                    26/10/2006
Would you please advise?
Thank you very much in advance

That MS Access driver is 64-bit, I think. If SQL Developer, or JDK is 32-bit you need to use the 32-bit driver. You can see if you have a 32-bit driver installed using c:\windows\system32\odbcadm32.exe

Similar Messages

How to change the password of a schema using Oracle SQL Developer

Hi need to change the password of a schema using Oracle SQL Developer how do i do it?

Hi
alter user username identified by password

How to create a counter using Oracle SQL Developer?

Is there any way to create a counter using Oracle SQL Developer to create the below scenario. Meaning it will recorded down the name of user and ID and time and the date they login.
Library portal home statistics shows how many users (outside and within the campus) visit the library portal.
Page Access statistics is recorded on an hourly basis. Users may select the statistics by
yearly (statistics displayed by all months in the selected year)
monthly (statistics displayed by all days in the selected month)
daily (statistics displayed by all hours in the selected day)

I'm giving here one basic post - hope this will solve your problem --
SQL>
SQL>
SQL> create table audit_info
2   (
3     usr        varchar2(50),
4     log_time   timestamp(6)
5    );
Table created.
SQL>
SQL>
SQL> create table err_log
2     (
3       log_cd      varchar2(20),
4       log_desc    varchar2(500)
5     );
Table created.
SQL>
SQL>
SQL>   create or replace procedure ins_err(errcd   in varchar2,
2                                        errnm   in varchar2)
3    is
4      pragma autonomous_transaction;
5    begin
6      insert into err_log values(errcd,errnm);
7      commit;
8    end;
9 /
Procedure created.
SQL>
SQL>
SQL>   create or replace procedure ins_aud(ud   in varchar2,
2                                        unm in varchar2)
3    is
4      pragma autonomous_transaction;
5    begin
6      insert into audit_info values(ud,unm);
7      commit;
8    exception
9      when others then
10        ins_err(sqlcode,sqlerrm);
11    end;
12 /
Procedure created.
SQL>
SQL>
SQL>
SQL> create or replace trigger log_odsuser1
2   after logon on odsuser1.schema
3   begin
4     ins_aud('ODSUSER1',sysdate);
5   exception
6     when others then
7       ins_err(sqlcode,sqlerrm);
8   end;
9 /
Trigger created.
SQL>
SQL*Plus: Release 9.2.0.1.0 - Production on Tue Jun 12 12:21:09 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
SQL>
SQL>
SQL>
SQL> set serveroutput on
SQL>
SQL>
SQL> select * from audit_info;
USR
LOG_TIME
ODSUSER1
12-JUN-07 12.00.00.00000000 AMHope this will solve your purpose.
Regards.
Satyaki De.

How to insert data from *.dmp file to oracle 11g using Oracle SQL Develope

hi
i backup my database using PL/SQL developer and made *.dmp file
how to insert data from *.dmp file to oracle 11g using Oracle SQL Developer 2.1.1.64
and how to make *.dmp file from sql*plus ?
thanks in advance

Pl/Sql developer has a config window, there you choose the exec to do the import/export.
Find it and his home version, it may be exp or expdp, the home version is the version of the client where the exp executable is.
Then use the same version of imp or impdp to execute the import, you do not need to use Oracle SQL Developer 2.1.1.64. If you want to use it, you must have the same version in the oracle home that exp/imp of sql developer use.

How to connect database using oracle SQL developer

Hello
I am newbie in EBS R12
I downloaded Oracle SQL Developer
and create new database conenction
Connection name: ebs demo db connection
username:
password:
Role: Default
Connection type: Basic
Hostname: ebstailin.demo.com
Port: 1521
SID: clone
when i try this there is an error
Status: Failure-Test failed: lo exception: The Network Adapter could not establish the connection
no idea about this
but i used the apps/apps as username and password
please help
thanks
Edited by: cheesewizz on Jul 16, 2010 11:35 PM

Hello
Thanks for your reply
I tried to connect and here is the result: see below
[oracle@ebstailin 11.1.0]$ sqlplus / as sysdba
SQL*Plus: Release 11.1.0.7.0 - Production on Sat Jul 17 15:35:31 2010
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> CONNECT apps/apps
Connected.
SQL>
But still cannot connect using ORACLE SQL Developer
thanks

Is there any known problem using Oracle SQL Developer 3.0.04 with Java 1.7?

I'm new to Oracle. I have installed Oracle SQL Developer 3.0.04 and Java 1.7. When I run Oracle SQL Developer, I will get the window Running this product is supported with minimum Java version of 1.6.0_04 and a maximum version less than 1.7. This product will not be supported....
Is there any known problem using Oracle SQL Developer 3.0.04 with Java 1.7?
I have already downloaded Java 1.6 but don't know whether I need to uninstall Java 1.7 first. If don't need to uninstall Java 1.7, how can I set Oracle SQL Developer to run with Java 1.6?
Thanks for any help.
Edited by: 881656 on Aug 25, 2011 11:22 AM

Hi,
One prior post discussing the use of Java 7 is:
SQL Developer 3.0 and Java SE 7?
There is no need to uninstall any Java version (except if you have disk space constraints) and no problem switching between Java versions. This may be controlled in the sqldeveloper.conf file in your ...\sqldeveloper\sqldeveloper\bin directory via the SetJavaHome line. For example:
#SetJavaHome ../../jdk
SetJavaHome C:/Program Files/Java/jdk1.6.0_26
#SetJavaHome C:/Program Files/Java/jdk1.7.0Regards,
Gary Graham
SQL Developer Team

Optimizing an SQL Query using Oracle SQL Developer

Hi ,
Currently i am using Oracle SQL Developer as my Database IDE .
Is it possible to use Orqcles SQLDeveloper for the purpose of Optimizing an SQL Query ??
For example assume i am having a query as :
Select from Tranac_Master where CUST_STATAUS='Y' and JCC_REPORT='N'*
Could anybody please tell me how can i use Oracle SQL Developer to optimize this query or any other SQL queries ??
Please share your ideas , thanks in advance .

1. Your query looks very simplistic as it is, so I fail to see how you can better optimise it (unless 'Tranac_Master' is a view, in which case I'd need to see the view details).
2. No tool can automagically optimise your SQL to any degree of practical use. Very minor adjustments may be possible automatically, but really it is a question of you knowing your data & database design accurately, and then you applying your expert knowledge to tune it.

Getting the schema using Oracle SQL Developer 1.5.1

I need to generate a report in CSV/XLS format using Oracle SQL Developer 1.5.1 to get the schema details
in the below format.
Table Name: XXXXXXXXX
Table Space Name: XXXXXXXXXXXXXXX
Structure :
Field Name Data Type Size
Xxxxxxxx xxxxxx xxxxx
Xxxxxxxx xxxxxx xxxxx
Xxxxxxxx xxxxxx xxxxx
Xxxxxxxx xxxxxx xxxxx
Field level constraint:
Xxxxxxxxxxxxxxxxxx
Table Level Constraint:
Xxxxxxxxxxxxxxxxxx
Indexes:
Index Name Column Name(s) Table space name
Xxxxxxxx xxxxxxxxx xxxxxxxxxxxx
Xxxxxxxx xxxxxxxxx xxxxxxxxxxxx
Xxxxxxxx xxxxxxxxx xxxxxxxxxxxx
Sequence Number:
Xxxxxxxxxxxxxxxx
Triggers:
Xxxxxxxxxxxxxxxxxx
I am using a query to do that, but I cannot run more than one queries in the Create Report Dialog.
I went to the Menu->View->Reports. In that, I chose User Defined Reports, created a new folder called Schema Detail and in that a report named Schema Detail. I right click on that report, choose Edit option, Create Report Dialog opens.
In the Create Report Dialog, I chose the option Script for Value of Style.
In the SQL column I enter a query "select * from table_names". But, if I enter another query after that, it does not run and reports an error "SQL Error: ORA-00933: SQL command not properly ended
00933. 00000 - SQL command not properly ended" Cause: Action: "
I end the first query with a semi colon, but it does not work.
The queries run fine in a SQL Worksheet. There, I can terminate the first query with a semi colon and enter the second query. Then, I run both of them together so that result-set of second query appears after the second.
Am I doing something wrong? Can someone please advise on how to get the information I need?
Thanks a lot.

You can do it in SQL Worksheet because you are running a script. You could run the script in SQL*Plus, and even start it from a bat/cmd file.
Or if you want this as a User Defined Report, you might make it a PL/SQL style report. Here, all output is done through DBMS_OUTPUT.PUT or DBMS_OUTPUT.PUT_LINE. You can output HTML tags or plain text. I have an example in my paper for ODTUG Kaleidoscope 2009.

How to solve Oracle SQL Developer connection problem ?

Folks,
Hello. I am using Oracle Database 11gR1. The Database Control Console https://localhost.localdomain:1158/em works correctly. I can create a Database and a table successfully.
My OS is Linux and connects to internet successfully.
In order to run SQL statements. we need to use Oracle SQL Developer. I connect Oracle SQL Developer in the following way:
Connection Name: DB1 (this is my database name as well)
Username: SYS (this is the user name I used to login to the Console)
Password: SYS (this the password used to login to the Console)
Connection Type: Basic
Host Name: localhost
Port: 1158
SID: DB1 (this is created during installing the Database)
But the error message comes up: "Status: Failure - IO exception Connection Reset."
Can any folk tell me how to solve Oracle SQL Developer connection problem ?

user8860348 wrote:
Folks,
Hello. I am using Oracle Database 11gR1. The Database Control Console https://localhost.localdomain:1158/em works correctly. I can create a Database and a table successfully.
My OS is Linux and connects to internet successfully.
In order to run SQL statements. we need to use Oracle SQL Developer. I connect Oracle SQL Developer in the following way:
Connection Name: DB1 (this is my database name as well)
Username: SYS (this is the user name I used to login to the Console)
Password: SYS (this the password used to login to the Console)
Connection Type: Basic
Host Name: localhost
Port: 1158
SID: DB1 (this is created during installing the Database)
But the error message comes up: "Status: Failure - IO exception Connection Reset."
Can any folk tell me how to solve Oracle SQL Developer connection problem ?username: sys
password: enter_your_correct_password given at the time of oracle installation
role: select sysdba if you would connect as sysdba else select normal for users other than sys
hostname: enter your oracle server hostname or ip address eg:- 192.168.11.12
to find the hostname open terminal/command prompt in oracle installed machine
type ---> hostname
type ---->ping hostname
you can find the ipaddress of the server
port number: 1521 (default) ----> i guess , else check the port number in the tnsnames.ora file under your ORACLE_HOME/network/admin folder
SID: DB1
try it
Good Luck

Accessing MySQL InnoDB tables via JDBC using Oracle SQL Developer

I had posted a problem in the Oracle SQL Developer forum with how that application (v1.1) accesses MySQL InnoDB tables and someone replied that the "[data migration] team created the integration with MySQL", so I am posting here in hopes of learning more about the problem.
Here's a summary:
When I use Oracle SQL Developer to query MySQL InnoDB tables, I need to issue a "commit" before I do each query to ensure that I am getting current results. Otherwise, it appears to be using a snapshot as-of the last commit. Is this a problem with SQL Developer, or a JDBC configuration, or MySQL problem even?
The full details are here:
Re: MySQL InnoDB tables

Hi,
I've posted a response to your original thread.
Regards,
Dermot.

Can I use Oracle SQL Developer to "Move" data?

Hello,
I'm new to Oracle and I'm trying to use Oracle SQL Developer to export data from one table (on server A) to another table (on sever B). I'm able to create a .ldr file but I don't know how to use the .ldr file in Oracle SQL Developer? I would appreciate any help you can provide.
Thanks!

Hi,
The name of tables are different ?
If I understood then try this below:
e.g:
C:\> exp user/password@connectionA file=maytable.dmp tables=SAFETYADMIN_TBL_0022_43
C:\> imp user/password@connectionB file=mytable.dmp full=y
After this import, then you can:
[pre]
C:\>sqlplus user/password@connectionB
SQL> insert into SAFETYUSER_TBL_0022_44
select * from SAFETYADMIN_TBL_0022_43;
SQL> drop table SAFETYADMIN_TBL_0022_43;Feedback if this is not that you want.
Cheers

Unable to connect to Oracle Database using Oracle Sql developer 2.1.1.64

Hi Everyone,
I am searching for some help regarding my problem with Oracle connectivity. I have installed Oracle 11g release 2 on my Windows XP Professional Laptop. For a few days after installation i could connect to the Oracle database with the SYSTEM account using Oracle SQL developer ( installed on the same Laptop) but now i am unable to do so.It gives me this annoying message:
An error was encountered performing the required operation Got a minus one from read call .Vendor code 0
However i am able to connect using Sql Plus by supplying the username SYSTEM and the corresponding password.
My TNSNAMES .ora file is as follows:
ORACLE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST =localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORACLE)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
My Listener.ora file is as follows:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = D:\app\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:D:\app\product\11.2.0\dbhome_1\bin\oraclr11.dll")
(SID_DESC =
(GLOBAL_DBNAME = Oracle)
(ORACLE_HOME = D:\app\product\11.2.0\dbhome_1)
(SID_NAME = Oracle)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(PROTOCOL_STACK =
(PRESENTATION = GIOP)
(SESSION = RAW)
ADR_BASE_LISTENER = D:\app
My Sqlnet.ora file is as follows:
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
I am new to Oracle and so i need someone in this forum who can help me resolve this problem. Also i even tried connecting to the database using Toad 10.5.0.41. It give me the following error:
ORA 12537 : TNS Connection closed
Thanks for your patience and help in advance.
---Prashant

Hello Irian and Sue,
I can connect to the Oracle database using SQL Plus. Now when i TNSPING ORACLE from command line i get the following message :
Used parameter files:
D:\app\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST =localhost
*)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ORACLE)))*
TNS-12537: TNS:connection closed
Thanks for your response to my initial post.Do u have any other methods to resolve this?

SQL Server table capture using Oracle SQL Developer

Hello,
I need to know how to set up the Oracle SQL Developer to captuer SQL Server table with correct field precision. For some reason, all NVARCHAR field precision sizes are the double of the original precision size after capturing the table.
Example:
SQL Server table 'A' with the following field:
name NVARCHAR( 50)
after table capture becomes:
name NVARCHAR2(100)
which is double of the original precision.
Any feed back or input is greatly appreciated.
Thank you.
Message was edited by:
qa2537

i'm sorry
--tsql correction
merge into md_columns m
using(
select md_col.precision as prec, md_col.column_name,md_col.rowid as row_id
FROM md_schemas md_s
join md_tables md_tab on md_tab.schema_id_fk = md_s.id
join md_catalogs md_cat on md_cat.id = md_s.catalog_id_fk
inner join md_connections con on md_cat.connection_id_fk=con.id
join md_columns md_col on md_col.table_id_fk = md_tab.id
where --md_s.created_on = (select max(created_on) from md_catalogs)
con.name like '%(corr%)'
and md_col.column_type in ('nchar','nvarchar')
) merge_clause on (m.rowid = merge_clause.row_id)
when matched then update set m.precision = merge_clause.prec/2
that works, as long as you don't forget to commit like i did....
hope it helps

Issues connecting to sql 2005 database using Oracle sql developer 1.2

I just installed the sql developer and was trying to use the quick migrate to try a migration from a sql server to oracle..
I am getting the following error message when i click on the retrieve database after entering the database credentials
Status : Failure net.sourceforge.jtds.jdbc.driver
I am getting another error message when i click on the 'test' button
Status: Failure - Unable to find driver: net.sourceforge.jtds.jdbc.driver
I downloaded the jtds driver from source forge and i am wondering what I should do to get the sql developer to make successful connections to sql server.
Any help is appreciated.
Thanks

I have the same issue with both version 1.1.3 of the SQL developer and the latest version(1.2.1). I have added the jar file path in tools->preferences->Database->Third Party etc...
I got the jar file from this download: jtds-1.2.2-src.zip
I get this error when trying to connect to an sql server:
oracle.jdeveloper.cm.CMException: Unable to find driver: net.sourceforge.jtds.jdbc.Driver
     at oracle.dbtools.raptor.conntypes.RaptorConnectionWrapper.createConnection(RaptorConnectionWrapper.java:175)
     at oracle.dbtools.raptor.conntypes.RaptorConnectionWrapper.getJdbcConnection(RaptorConnectionWrapper.java:202)
     at oracle.dbtools.raptor.conntypes.RaptorConnectionWrapper.getPresentation(RaptorConnectionWrapper.java:68)
     at oracle.dbtools.raptor.utils.Connections$ConnectionInfo.createConnection(Connections.java:1004)
     at oracle.dbtools.raptor.utils.Connections$ConnectionInfo$ConnectRunnable.doWork(Connections.java:876)
     at oracle.ide.dialogs.ProgressRunnable.run(ProgressRunnable.java:159)
     at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:553)
     at java.lang.Thread.run(Thread.java:595)
Any help would be appreciated. I like the tool would hate to have to abandon it, it works like a charm on our oracle databases.

How to lock Oracle SQL developer 1.5.1

Hi,
If you run a PL/SQL block on a page that takes some time and while still processing you try to see a table it locks.
Running: Windows XP, Oracle SQL Developer 1.5.1, jdk 1.6.07, Orcacle 10g.
Greetings,

This is well known. Everything uses the same connection so while the query is busy, you can't do anything else.
The workaround is to use the Unshared Worksheet feature. Typing ctrl-shift-N in a worksheet will create new worksheet using a copy of the current connection.
Unfortunately, unless you remember to do this first, the object browser is still unusable because it is using the same connection as the original worksheet.

How to use Oracle SQL Developer 4.0 to connect to Ms Access file with .accdb extension

Similar Messages

Maybe you are looking for