How to use setTimeout for Callback function in ajax DWR?
Hi,
I am facing a problem of ajax request not returning back to the specified callback function. As a result my application screen gets locked waiting indefinitely.
The timeout in DWR is controlled using a setTimeout method.
Can someone plz tell me how to implement this in my javascript code so that my Callback function is invoked for sure.
below is my code snippet...
var dwrMap = new DWRMap(theMainForm);
dwrMap['menuId'] = menuid;
CommonService.executeAutoLogOut(dwrMap, fnPerformLogOut);
else{
fnDoAnalyze(analyzeUrl);
function fnPerformLogOut(response){
if(response == "timedOut"){
alert("Timed Out");
fnAskToLogin();
else{
alert("Not timed out");
fnDoAnalyze(analyzeUrl);
Here CommonService.executeAutoLogOut(dwrMap, fnPerformLogOut); is sending ajax request.
and fnPerformLogOut() is the callback function.
Hi Shyam,
Have a look at this,
START-OF-SELECTION.
gd_file = p_infile.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = gd_file
has_field_separator = 'X' "file is TAB delimited
TABLES
data_tab = it_record
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc NE 0.
write: 'Error ', sy-subrc, 'returned from GUI_UPLOAD FM'.
skip.
endif.
Regards,
Sai
Similar Messages
-
How to use Exceptions for a function module
Hi folks,
I have created a new function module.Its working fine, but i am not aware of using exceptions for a function module. I hav just declared an exception in the 'exception' tab. Could any body explain me how to use that in my FM source code....Thanks...Hi Shyam,
Have a look at this,
START-OF-SELECTION.
gd_file = p_infile.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = gd_file
has_field_separator = 'X' "file is TAB delimited
TABLES
data_tab = it_record
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc NE 0.
write: 'Error ', sy-subrc, 'returned from GUI_UPLOAD FM'.
skip.
endif.
Regards,
Sai -
How to use ejbs for accessing Function Module.
Hi,
I want to call ABAP function module using ejb(Since I want to expose them as web service on different server). I know how to do that using Models, but dont know how to go ahead using ejbs.
Could you please guide me on this?
Regards,
Abhijeet.Hi,
In another thread with a similar question I found these references:
/people/kathirvel.balakrishnan2/blog/2005/07/26/remote-enable-your-rfchosttoip-to-return-host-ip-to-jco
Re: interfacing SAP with an existing java applications
And this code example:
HashMap result = new HashMap();
Object ret = new Object();
JCO.Client mConnection = null;
mConnection = getConnection();
JCO.Repository mRepository;
mRepository = new JCO.Repository("R3", mConnection);
JCO.Function function =
createFunction("Z_ISA_GET_ORDER_ITEM_INFO", mRepository);
function.getImportParameterList().setValue(orderNum, "ORDER");
if (function != null) {
mConnection.execute(function);
JCO.Table codes = function.getTableParameterList().getTable("INFO");
for (int i = 0; i < codes.getNumRows(); i++) {
codes.setRow(i);
int tmp = new Integer(codes.getString("POSNN")).intValue();
String tmpStr = new String(Integer.toString(tmp));
ret = result.put(tmpStr, codes.getString("VBELN"));
} else {
System.out.print("Fxn call failed for Z_ISA_GET_ORDER_ITEM_INFO");
JCO.releaseClient(mConnection);
Good luck,
Roelof -
How to use Logical database in function module?
I will create a function module in HR.
but how to use Logical database in function module ? Logical database PNP always show screen.in function (RFC) code , it is a matter.You cannot attach the LDB to the main program of the function group.
- So you may [SUBMIT|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=submit&adv=false&sortby=cm_rnd_rankvalue] a report which use the LDB and get back the data (export/import), by default in the syntax of SUBMIT the selection-screen will not be displayed
- Use [LDB_PROCESS|https://www.sdn.sap.com/irj/sdn/advancedsearch?query=ldb_process&cat=sdn_all], fill a structured table for selection, and get data back in another table
- Use [HR function modules to read Infotypes|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=hrfunctionmodulestoread+Infotypes&adv=false&sortby=cm_rnd_rankvalue].
Regards -
How to use a user defined function in XI
Hi Experts,
I would like learn how to use a user defined function in Xi during mapping . Is there any step by step on that.
Besides during when me make communcaton channels I see the following tabs...Paramters ..Identifiers ...Module...
The module that is given here ...where and how it is used.Hi,
You can write UDFs in java in Graphical mapping to enhance your XI Graphical mapping functionality
The steps for doing it would be:
1. Click on Create New function Button found on Bottom left corner on your XI Mapping window.
2. Write your java code.
3. Run the Mapping Test as usual.
>>The module that is given here ...where and how it is used.
The adapters in the Adapter Framework convert XI messages to the protocols of connected external systems and the other way around. When doing so, some
functionality might need to be added specific to a situation which is possible with the use of custom modules.
Typical example would be validation of file content when using a File Adapter or modification of the message payload to a common content structure which is not supported by any of the standard SAP modules.
An Adapter module is developed as an Enterprise Java Bean and is called locally by the Adapter.
An example on modules :
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/da5675d1-0301-0010-9584-f6cb18c04805">How to develop a module for reading file name in a sender file adapter XI 3.0</a>
Cheers,
Chandra -
How to Use BAPI_OUTB_DELIVERY_CHANGE for Batch Split
Hi Experts, I have the follow delivery:
Item Material Deliv.Qty Un
10 739911 2 PQT
And I want to obtain this:
Item Material Deliv.Qty Un Batch
10 739911 0 PQT
900001 739911 1 PQT ZZ00060
900002 739911 1 PQT ZZ00061
But, after using the Bapi I obtained this:
Item Material Deliv.Qty Un Batch
10 739911 1,372 PQT
900001 739911 0,314 PQT ZZ00060
900002 739911 0,314 PQT ZZ00061
So as you can see the problem is with the "Deliv.Qty". I expected:
Item Deliv.Qty
10 0
900001 1
900002 1
But I obtained:
Item Deliv.Qty
10 1,372
900001 0,314
900002 0,314
The parameters that I am using in the Bapi are:
HEADER_DATA
DELIV_NUMB = 801174646
HEADER_CONTROL
DELIV_NUMB = 801174646
DELIVERY = 801174646
TECHN_CONTROL
UPD_IND = U
ITEM_DATA (three records):
DELIV_NUMB = 801174646
DELIV_ITEM = 000010
MATERIAL = 739911
FACT_UNIT_NOM = 1
FACT_UNIT_DENOM = 1
DELIV_NUMB = 801174646
DELIV_ITEM = 900001
MATERIAL = 739911
BATCH = ZZ00060
HIERARITEM = 000010
USEHIERITM = 1
DLV_QTY = 1
DLV_QTY_IMUNIT = 1
FACT_UNIT_NOM = 1
FACT_UNIT_DENOM = 1
DELIV_NUMB = 801174646
DELIV_ITEM = 900002
MATERIAL = 739911
BATCH = ZZ00061
HIERARITEM = 000010
USEHIERITM = 1
DLV_QTY = 1
DLV_QTY_IMUNIT = 1
FACT_UNIT_NOM = 1
FACT_UNIT_DENOM = 1
ITEM_CONTROL (three records):
DELIV_NUMB = 801174646
DELIV_ITEM = 000010
CHG_DELQTY = X
DELIV_NUMB = 801174646
DELIV_ITEM = 900001
CHG_DELQTY = X
DELIV_NUMB = 801174646
DELIV_ITEM = 900002
CHG_DELQTY = X
So I am missing something but I don't know what.
Can any one help me with this please?
PD: I have looked the following forums in order to use the Bapi:
How to Use BAPI_OUTB_DELIVERY_CHANGE for Batch Split
batch split using BAPI_OUTB_DELIVERY_CHANGE
Re: Help in BAPI_OUTB_DELIVERY_CHANGE(batch-split)
BAPI_OUTB_DELIVERY_CHANGE - Batch Splits don't work
Help for BAPI_OUTB_DELIVERY_CHANGEHey,
My code is for the inbound delivery but it should work the same.
Give this a try.
REPORT z_delivery_batch_split.
DATA:header_data LIKE bapiibdlvhdrchg,
header_control LIKE bapiibdlvhdrctrlchg,
delivery LIKE bapiibdlvhdrchg-deliv_numb,
ls_return LIKE bapiret2,
item_data TYPE TABLE OF bapiibdlvitemchg,
item_control TYPE TABLE OF bapiibdlvitemctrlchg,
ls_item_data LIKE bapiibdlvitemchg,
ls_item_control LIKE bapiibdlvitemctrlchg,
return TYPE TABLE OF bapiret2 WITH NON-UNIQUE KEY type.
header_data-deliv_numb = '1800005005'.
header_control-deliv_numb = '1800005005'.
delivery = '1800005005'.
ls_item_data-deliv_numb = '1800005005'.
ls_item_data-deliv_item = '900001'.
ls_item_data-material = '000000000020067722'.
PERFORM create_batch CHANGING ls_item_data-batch.
ls_item_data-hieraritem = '000010'.
ls_item_data-usehieritm = '1'.
ls_item_data-dlv_qty = 80.
ls_item_data-dlv_qty_imunit = 80.
ls_item_data-fact_unit_nom = '1'.
ls_item_data-fact_unit_denom = '1'.
ls_item_data-sales_unit = 'EA'.
ls_item_data-base_uom = 'EA'.
APPEND ls_item_data TO item_data.
ls_item_data-deliv_numb = '1800005005'.
ls_item_data-deliv_item = '900002'.
ls_item_data-material = '000000000020067722'.
PERFORM create_batch CHANGING ls_item_data-batch.
ls_item_data-hieraritem = '000010'.
ls_item_data-usehieritm = '1'.
ls_item_data-dlv_qty = 60.
ls_item_data-dlv_qty_imunit = 60.
ls_item_data-fact_unit_nom = '1'.
ls_item_data-fact_unit_denom = '1'.
ls_item_data-sales_unit = 'EA'.
ls_item_data-base_uom = 'EA'.
APPEND ls_item_data TO item_data.
ls_item_control-deliv_numb = '1800005005'.
ls_item_control-deliv_item = '900001'.
ls_item_control-chg_delqty = 'X'.
APPEND ls_item_control TO item_control.
ls_item_control-deliv_numb = '1800005005'.
ls_item_control-deliv_item = '900002'.
ls_item_control-chg_delqty = 'X'.
APPEND ls_item_control TO item_control.
break cgavin.
CALL FUNCTION 'BAPI_INB_DELIVERY_CHANGE'
EXPORTING
header_data = header_data
header_control = header_control
delivery = delivery
* TECHN_CONTROL = TECHN_CONTROL
TABLES
* HEADER_PARTNER = HEADER_PARTNER
* HEADER_PARTNER_ADDR = HEADER_PARTNER_ADDR
* HEADER_DEADLINES = HEADER_DEADLINES
item_data = item_data
item_control = item_control
* ITEM_SERIAL_NO = ITEM_SERIAL_NO
* EXTENSION1 = EXTENSION1
* EXTENSION2 = EXTENSION2
return = return
* TOKENREFERENCE = TOKENREFERENCE
* HANDLING_UNIT_HEADER = HANDLING_UNIT_HEADER
* HANDLING_UNIT_ITEM = HANDLING_UNIT_ITEM
* PARTIAL_GR_OBJECTS = PARTIAL_GR_OBJECTS
READ TABLE return
INTO ls_return
WITH TABLE KEY type = 'E'.
IF sy-subrc = 0.
MESSAGE ID ls_return-id TYPE ls_return-type NUMBER ls_return-number WITH ls_return-message_v1 ls_return-message_v2
ls_return-message_v3 ls_return-message_v4.
ENDIF.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
break cgavin.
*& Form CREATE_BATCH
* text
* <--P_LS_ITEM_DATA_BATCH text
FORM create_batch CHANGING p_ls_item_data_batch.
DATA: ls_bncom TYPE bncom.
ls_bncom-matnr = ls_item_data-material.
ls_bncom-werks = 'C333'.
ls_bncom-lgort = '3000'.
SELECT SINGLE mtart
FROM mara
INTO ls_bncom-mtart
WHERE matnr = ls_bncom-matnr.
CALL FUNCTION 'VB_NEXT_BATCH_NUMBER'
EXPORTING
matnr = ls_bncom-matnr
werks = ls_bncom-werks
check_batch = 'X'
check_material = ''
message_when_auto = ' '
x_bncom = ls_bncom
lock_batch = ' '
IMPORTING
new_charg = p_ls_item_data_batch
EXCEPTIONS
no_material = 1
no_plant = 2
material_not_found = 3
plant_not_found = 4
no_batch_handling = 5
batch_exist = 6
no_number = 7
illegal_batch_number = 8
interval_not_found = 9
object_not_found = 10
interval_overflow = 11
error_automatic_batch_number = 12
cancelled = 13
automatic_batch_num_not_active = 14
OTHERS = 15.
IF sy-subrc = 0.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
ENDIF.
ENDFORM. " CREATE_BATCH -
How to Use 'uid' for AD Users Without Domain Name For User Log in OAM
How to Use 'uid' for synchronized Active Directory (AD) Users into Oracle Internet Directory (OID) Without Domain Name For User Logins in OIDDAS and OAM
We successfully integrated OAM 11g with EBS R12.1.3 Now all the AD user id's stored in fnd_users table as [email protected]
How can we remove @abc.com
We are using OID 11g and OAM 11g
Found the similar note for OID 10G: How to Use 'uid' for AD Users Without Domain Name For User Logins in OIDDAS and SSO [ID 580480.1]
We are in OID 11g.
Any help on this greatly appreciated.I couldn't find any reference that could be helpful -- Please log a SR and see if this is supported and if the steps are available.
Thanks,
Hussein -
How to use webcam for Yahoo Messenger on MacBook Pro, How to use webcam for Yahoo Messenger on MacBook Pro because it's not working =(
The cheap & easy way is to just drag the app to the Trash.
If you want to get all of the associated files use an app deleting app like the free AppCleaner;
http://www.freemacsoft.net/appcleaner/
Just drag an app and drop it on the AppCleaner icon in the Dock and it will find and present to you all the files it thinks are associated with the app. You can uncheck any that you want to keep and then let AppCleaner Trash the rest. -
How to use i for if condition in a for i in loop?
Hi friends,
I have a question on how to use i for IF condition in a loop, in order to get an efficient programming and results. Here is outlined SQL:
cursor is
select c1,c2,c3 from table1; -- 100 rows returned.
open cursor
loop
fetch c1,c2,c3 into v1,v2,v3;
for i in 1..3 loop
if 'v'||i between 90 and 100 then
v_grade := 'Excellent';
elsif 'v'||i between 80 and 89 then
elsif 'v'||i between 50 and 59 then
end if;
end loop;
close cursor;
This way, I don't need to use a lot of if..then for hard code v1,v2,v3,.... actually I have more v..
But Oracle gave an error of this usage of 'if 'v'||i' or 'v'||to_char(i).
Thanks for any advice in advance!user508774 wrote:
Thanks for comments and advices. But I didn't get your inputs clearly. Are you saying I don't need to use PL/SQL to achieve this?Correct. Ronel and John showed you the basic approaches. SQL is not a mere I/O language for making read and write calls. It is a very capable, flexible and powerful language. One can solve a problem with a few lines of SQL code, that will take 100's of lines of PL/SQL or Java code.
So do not underestimate what can be done in SQL.
v_cmd := 'UPDATE parts_categ_counts SET w1='||v1||', w2='||v2||...||v9||' WHERE seq='||vseq||';
EXECUTE IMMEDIATE v_cmd;This code is also wrong. Besides the fact that there is no need for dynamic SQL, this approach creates a brand new SQL statement each loop iteration.
SQL is source code. It needs to be parsed (compiled). The end result is an executable program that is called a cursor. This cursor needs to be stored in server memory (the SQL Shared Pool in the SGA).
The problem with your code is that it is slow and expensive - it generates lots of unique SQL statements that need CPU for parsing and server memory for storage.
These add up to a very significant performance overhead. That is the wrong approach. The correct approach is the same one that you would use in any other programming language.
Let's say you need to use Java to process a bunch of CSV files - exact same CSV layout used by each file. A file needs to be read, processed, and a log file created.
Will you write a Java program that loops through the files, for each file found, write a Java program for processing that file, compile it, then execute it?
Or would you write a Java program that takes the name of the file as input, and then process that file and writes the log file?
The 2nd approach provides a program that can process any of those CSV files - one simply needs to pass the filename as an input parameter.
Your code and approach use the 1st method. Not the 2nd. And that is why it is wrong.
To create a SQL program with parameters is done by using bind variables. Instead of
v_cmd := 'UPDATE parts_categ_counts SET w1='||v1||', w2='||v2||...||v9||' WHERE seq='||vseq||';
The following SQL source code should be created:
v_cmd := 'UPDATE parts_categ_counts SET w1=:v1, w2=:v2 ..., w9=:v9 WHERE seq= :vseq';
The tokens with the colon prefix (such as :v1), are bind variables. Think of these as the parameters to the SQL cursor.
The server parses this SQL into a cursor. You can now execute the same cursor over and over again, using different bind variables. (just like the 2nd approach above that one would use in Java)
In PL/SQL, this is made even easier as you can code native SQL code with PL/SQL code and use PL/SQL variables in it. The PL/SQL compiler is clever enough to do the SQL parsing, variable binding, and cursor execution for you. So in PL/SQL, you would use:
UPDATE parts_categ_counts SET w1=v1, w2=v2 ..., w9=v9 WHERE seq= vseq;
Where v1 and the others are PL/SQL variables.
That all said - PL/SQL is only used for data crunching, when the processing of data is too complex for the SQL language to deal with. And this is very seldom the case.
The main reason for using PL/SQL it to provide processing flow control, conditional processing and error handling, for SQL code. As the SQL language does not have these features. -
How to use a user defined function module in IP
Hi All,
Can you please guide me on how to use a user created function module in IP? My requirement is to have 2 exit function modules to be used in IP to load the falt file data into a cube..
Regards,Hi,
/people/marc.bernard/blog/2007/11/25/how-to-load-a-file-into-sap-netweaver-bi-integrated-planning-part-1
thanks to Marc Bernard
Regards -
Install Sun ONE Directory Server 5,2 & how to use it for authenticate user
Good afternoon, Excuse, are newbie in the scope I am learning and putting desire to him, this in my situation I am trying to install Sun ONE Directory Server 5,2 since I understand that this it is application LDAP for Solaris, ok I want to install it to authenticate user against the system, that is to say, to be able to acces the server entering with a created user from the data base of LDAP and make think user that his created in the system. But the documentation that I finds indicates the installation of Sun ONE Directory Server 5,2 but it not clearly about how to use it for authentication. Some one have any manual step by step of Sun ONE Directory Server 5,2 installation and how to make it for authentication systems users.
I read the forum seeking for anwser and i get confuse
Thanks for the help and sorry for any inconvenient
Message was edited by:
Aku_28
Message was edited by:
Aku_28I think that I found the Sun endorsed book locations for using LDAP accounts that don't use authentication besides "crypt". I now can use an account with a "ssha" password. It can be more than 8 characters long.
Chapter 14 System Administration Guide: Naming and Directory Services
Read page 201 which is the pam.conf file pam_ldap setups. I edited my "/etc/pam.conf" file to reflect this
Chapter 7 Directory Server 5.2 2005Q4 - Administration Guide
Read page 316-318 which has a graphical technique to specify password syntax. I set it up and then tried the password by running "su - brahms". It now requires a longer password than 8 characters and it is set up to use "ssha" for that UID entry "brahms". -
How to use parathesis for OR and AND OPERATOR...
oracle 10g
Hi
Guys please help how to use parathesis for this below query its giving same output values for all my similar queries
select count(balance) from balanace_tb
where kk_code in(111,112,113)
or
kk_code in(111,1124,115,116) and sec_id in(50,51,52,53)
or
kk_code in(100,164,215,161) and sec_id in(53,51,52,59)
or
kk_code not in(100,164,215,162,134) and sec_id in(53,51,52,59)
or
kk_code in(100,164,215,16) and sec_id in(53,51,52,59)
and
open_date=20130331I assume you're looking for something like this?
select count(balance) from balanace_tb
where ( kk_code in(111,112,113)
or (kk_code in(111,1124,115,116) and sec_id in(50,51,52,53))
or (kk_code in(100,164,215,161) and sec_id in(53,51,52,59))
or (kk_code not in(100,164,215,162,134) and sec_id in(53,51,52,59))
or (kk_code in(100,164,215,16) and sec_id in(53,51,52,59))
and open_date=20130331
If not, please post some example data, the expected output from that data, and the logic you are expecting to use, as well as posting your database version.
Re: 2. How do I ask a question on the forums? -
Need documents for how to use OAM for APPS DBAs
Hi All,
Need documents/pdfs, how to use OAM for APPS DBAs.
Thanks a lot in advanceHi,
For R12 ,refer the Oracle E-Business Suite System Administrator's Guide - Configuration part no:E12893-03 (http://download.oracle.com/docs/cd/B53825_04/current/acrobat/121sacg.pdf)
For 11i version pls chk :
Oracle Applications System Administrator's Guide - Configuration (zipped) B13925-06 (http://download.oracle.com/docs/cd/B25516_18/current/acrobat/115sacg.zip)
--Rk -
How to use offset for select-option parameter ?
Hi experts
could anybody please let me know how to use offset for select-option parameter. i can able to use offset for table fields, variabiles and all , but don't know how to use for parameters.
following is my code
SELECT-OPTIONS: s_prctr FOR vbsegs-prctr OBLIGATORY.
here "prctr" length is 10.
i'm using two tables 1. vbsegd-bupla
2. vbsegs-prctr
here prctr+6(4) = bupla.
"Bupla" length is 4
SELECT belnr gjahr bukrs bupla sgtxt buzei FROM vbsegd INTO CORRESPONDING FIELDS OF TABLE it_vbsegd FOR ALL ENTRIES IN it_vbkpf
WHERE belnr = it_vbkpf-belnr
AND gjahr = it_vbkpf-gjahr
AND bukrs = it_vbkpf-bukrs
AND bupla IN s_prctr.
the above statement is not working as prctr and bupla lenths are different. here i want to use offset.
SELECT belnr gjahr bukrs prctr sgtxt buzei FROM vbsegs INTO CORRESPONDING FIELDS OF TABLE it_vbsegs FOR ALL ENTRIES IN it_vbkpf
WHERE belnr = it_vbkpf-belnr
AND gjahr = it_vbkpf-gjahr
AND bukrs = it_vbkpf-bukrs
AND prctr IN s_prctr.
this is working as prctr and s_prctr lengths are equal.
could anybody please help me out in this.
Thanks in advance.
regards
satishBelow code will work for you.
SELECT-OPTIONS: s_prctr FOR vbsegs-prctr OBLIGATORY.
RANGES: s_bupla FOR vbsegd-bupla.
s_bupla[] = s_prctr[].
DELETE ADJACENT DUPLICATES FROM s_bupla.
SELECT belnr gjahr bukrs bupla sgtxt buzei FROM vbsegd INTO CORRESPONDING FIELDS OF TABLE it_vbsegd FOR ALL ENTRIES IN it_vbkpf
WHERE belnr = it_vbkpf-belnr
AND gjahr = it_vbkpf-gjahr
AND bukrs = it_vbkpf-bukrs
AND bupla IN s_bupla. -
How to use stysheet for Swing components?
Hi,
Give me a guidence abt how to use Stylesheet for Swing components to crate good looking GUI...........thnxthank you for your reply,
I want to know how many times a component is refreshed. I'm asumming the RefreshCondition attribute gets called everytime a component gets refreshed, hence it could be counted.
I'm just not sure how to use it.
Maybe you are looking for
-
Image Processor not outputting correct size
It doesn't matter whether I try from Photoshop or Bridge, the result is the same: I'm doing a simple JPEG resize to fit, from 603x603 to 100x100 but they always result in a size of 101x100! What the heck could be going on? I've tried specifying a pix
-
HT6400 Problems with IMAC ( 10.9.5) update
I already started a chat with Eric Root which didn't resolve anything ( but he seems to have disappeared!) . OriginallyI thought that my problems following Mavericks update a few days ago to 10.9.5 were limited to e mail but I now realise that neithe
-
Processing mutliple records on multiple pages in a tabular form
I'm a newbie to Apex (4.0). I have a tabular form displaying 500 rows records in multiple pages. The row selector is selected by defaulted ie. all rows have been checked. Upon unselecting items in multiple page, the Multi Row Delete (Post Processing
-
Detial About BI Presentation Service Connection
Hi, I am working on the integartion with BIEE and ADF and face a problem.(you may check it here: OBIEE Objects do not appear when intergrating in ADF Here I want to know a detail info about BI Presentation Service Connection. How did ADF and BIEE com
-
Hi, is there a possibility to send more than one Photo per Mail ? I wanted to send 5 images to a friend and hat to send 5 Mails for that. Is there a better solution ? Regards