How to use shortcut keys on wireless keyboard with ipad

i just purchased an ipad 4 with a wireless keyboard and do not know how to use the function keys on the wireless keyboard to access the homescreen, scroll up and down, etc. please help with anything i need to turn on/off or download . thanks

If you have more than one keyboard active, you may be using a different one than you want. Use the "globe" key to make sure your virtual keyboard is set to Japanese Romaji or Japanese Kana. Which one do you use?
On the hardware keyboard, use apple/command plus space to switch between different keyboard layouts which may be active.

Similar Messages

Req any examples of how to use a USB midi controller/keyboards with Labview TIA

Req any examples of how to use a USB midi controller/keyboards with Labview TIA

Hi,
To access the MIDI ports you will need to call the Windows SDK. To send MIDI commands is relatively easy, here is an example that shows you how to send data to a MIDI controller or keyboard.
As far as input goes, this is the hard part. There are a series of functions that you need to call to open up the device, set some buffers and and possibly a callback to get notifications on the incoming data.
Reading MIDI data will not be an easy task, your best bet will be to implement this in a DLL and call that DLL in LabVIEW, there should be some code available o the web.
= "http://msdn.microsoft.com/library/default.asp?url=/library/en-us/multimed/htm/_win32_multimedia_... is a link to the Windows multimedia functions that you could use for MIDI input.
Let me know if you have any further questions.
Regards,
Juan Carlos
N.I.

Can I use apple wireless keyboard with ipad?

Well hello there,
I have a simple question to Apple Communities.
Can I use the Apple wirelless keyboard with ipad?
Does is it works fine?
I've never tested nor asked anyone.
Thank you guys.
Erick Felix

The bluetooth one, yes. You can.

How to use wireless keyboard with iPad, How to use wireless keyboard with iPad

Do you have to have a Mac to setup the wireless keyboard. Can I use it directly with my iPad without a Mac.

What brand/model keyboard? Not all keyboards can be used.
http://www.tech-recipes.com/rx/5772/ipad-how-to-pair-connect-any-bluetooth-keybo ard/
 Cheers, Tom

Can I use my wireless keyboard with iPad?

I have an original old iPad. I also have a Mac Wireless keyboard.
Can I link to my my iPad? and how?

You can certainly try
1) on iPad: pull up Settings > General > Bluetooth
2) slide from Off to On (or On to Off, wait, then Off to On again)
3) on keyboard: hold down the power button on the side until the little green light flashes
4) release
5) on iPad: "Apple Wireless Keyboard" should pop up under "Devices"
6) if yes, tap "Not Connected" so it searches for a return signal from the keyboard
if no, try resetting/restarting your iPad (holding down the Home button and the Sleep button at the same time) and repeating instructions
7) on keyboard: send the iPad a return signal by pressing the Shift key

Can I use my mac wireless keyboard with iPad?

I'm sure it will work - using my Apple wireless keyboard that I use with my laptop.... and use it with my iPad
Just wondering... would there be any problems or downfalls I haven't thought of?
Sounds like a dumb question
I've just seen a Belkin iPad keyboard advertised for £80 (more than the Apple wireless keyboard for laptops)
So I thought... there *must* be 'something' I'm missing?
Thanks
Omar

Yes it will work. However, you would need to delete it from one device before you attach it to the new device. Bluetooth devices may only be paired with one thing at a time (for obvious reasons).
Barry

How to use my TS 12 Ensoniq keyboard with Logic Pro X

I just got Logic Pro X but I have no idea how to use my midi keyboard. I have a midi to usb cable running between my TS-12 Ensoniq keyboard. How do I set up the drivers or really just get it all to work. I'm a noob to the hardware stuff though I'm quiet fimilar with Logic 9. Help would be great asap!

AidansMarbles wrote:
I have a midi to usb cable running between my TS-12 Ensoniq keyboard.
So I guess it can make the sound of one hand clapping?
Anyway...
Does the USB-MIDI cable need drivers? What brand is it? There are some cheap ones floating around ebay that don't work properly with all hardware. Assuming you've got a working one that needs no drivers, all you need to do is plug it in, the OS and Logic should detect it automatically. In Audio MIDI Setup (MIDI page) you can check if your Mac indeed recognizes the MIDI interface. It will not show the TS12 itself, just the MIDI interface.
You can find Audio MIDI Setup in Applications>Utilities.

Possible to use non-AT&T wireless card with iPad??

Thinking of getting an iPad, however I travel frequently and after looking at the outlandish prices for international data plans, I am about ready to give up on the idea. Anyone know if it is possible to use a non-AT&T wireless card with the iPad? I'm guessing there would be a compatibility issue of some sort.

The 3G iPad is not locked to a particular service provider. You can get a local Sim card and data plan in many countries. This article will give you some idea of what's available: http://gigaom.com/2010/05/10/ipad-data-plan-guide/

How to use both wired and wireless connection with static addresses

Now that I have setup my home network with static addresses (router, mini1, mini2 and PC) in the way I want, (big thanks to BDAqua http://discussions.apple.com/thread.jspa?threadID=1271635&tstart=0) I would like to understand some more advanced network concepts.
I would like to change the network so that I use both the wireless connection and the built-in ethernet connection at the same time in my Mac mini1. I would like to connect my PC to my Mac mini by using the wired ethernet connection so that I reach the Internet from my PC as well. I would also like to be in control of all the addresses therefore I want to assign the addresses manually.
The question: What addresses should I use between mini1 and PC? Should I use the same wireless address space as I already use between the wireless router and the other computers (router: 192.168.1.1, mini1: 192.168.1.101, mini2: 192.168.1.103) or should I use something totally different like 10.X.X.X? What should I put in ethernet connection "Router"-field, the same as in Airport (192.168.1.1)? What about DNS, same as in Airport?

If I understand this correctly, you wish your Mini to perform Internet Sharing for your PC, correct!?
If so you'll pretty much have to let the Mini handle DHCP & NAT on the Ethernet port. You also want to be sure Airport is dragged to the top of Network>Show:>Network Port Configurations, that's what position the Mini will use 1st for Internet itself.
On the Mini turn on both Web Sharing & Internet Sharing. The PC once connected will have the Mini's Ethernet IP as it's Gateway addy.

How do you get the Apple Wireless Keyboard to accept function keys?

I use the Apple Wireless Keyboard with my iPad2 and I use the VPN to connect to my work-related software which requires that I use some of the function keys as actual F1, F2, F3,...etc. When I hit F2, the iPad2 responds with the Screen Brighter action. How do I get the keyboard input to just be F2? Thanks!
Jeff Lehmer

Thanks. But I tried that and nothing happens. I've looked though all the System Preferences sections and can't find anything on this.

I have been trying to use an apple wireless keyboard with my ipad 2. I will be typing then suddenly the ipad will repeat the key strock about twenty times. It drives me crazy. What is happening and why?

I have been trying to use an apple wireless keyboard with my ipad 2. I will be typing along and suddenly the ipad will take off and repeat the key stroke about twenty times rapid fire. It really makes me crazy. What is happening and why? Help

Found this thread by searching the forum. I hope it helps.
https://discussions.apple.com/thread/5471311

How to set Shortcut keys for button in Apex

Hi
Could anyone help me on how to set shortcut keys for buttons in Apex.
I need to use say ALT + S to submit the page.
The following thread pertaining to HTML DB refered to use ACCESS key. but that couldnt work in my case.
Re: operation of the app. with the keyboard
Any pointers on achieving this would be helpful.
Thanks
Vijay

Hi Vijay,
I’m afraid you must do it using javascript key listener. You can’t use action() on template based buttons because they are actually not HTML buttons but images with hyperlink.
Key listener checks which key has been pressed down and invoke some JS function. For example, write this code in page header:
<script>
document.onkeydown=keyCheck;
function keyCheck(e){
     var KeyId = (window.event) ? event.keyCode : e.keyCode;
     switch(KeyId){
          case 113:
               doSubmit('SAVE');
               break;
          case 118:
               alert('Hello');
               break;
</script>
This script will submit page with request 'SAVE' if you press F2 or will show alert message if you press F7. Modify it to your issue.
Regards,
Przemek

Copying attributes of object/text using shortcut keys!

Hello!
I want to copy attributes of one paragraph to another using shortcut keys. Is it possible in InDesign CS3 version? If yes where it is?
I know Mx Freehand can do it.

Define a paragraph style using the formatting you want (just highlight some text and define the paragraph style from the panel -- it will pick up the attributes). You can assign a keyboard shortcut as part of the style definition.
That isn't 100% keyboard, at least to start, but it's how ID works. Styles are extremely powerful. Edit the style and all text using the style changes instantly. Base one style on another, edit the base style, and the based-on text will change attributes not overridden in the based-on style.
Peter

How can configure shortcuts key like in CFstudio 5

how can configure shortcuts key for CF tags (e.g. alt + o for
cfoutput) like in CFstudio 5? With DW 8 it seems not possible
unless you write a snippet of the cf tag which is time consuming.
There must be a smarter way. Any feedbacks? Thanks

Don't have DW8 in front of me (am at work, still using
MX2004), but look in the edit menu for Keyboard shortcuts. It will
open up a dialog box where you can re-assign
M

E and C keys on wireless keyboard activate Mission Control

I just set up a wireless keyboard with my Macbook Air. For some reason, the E and C keys activate Mission Control at random times. I went to System Preferences > Keyboard > Keyboard Shortcuts and restored everything to default but it still doesn't fix the problem. I also can't find any direct associations between these keys and Mission Control in the Mission Control setting. Help!

In case anyone is curious, I solved this issue by upgrading to OS X 10.6.4. The brightness and volume function keys now control these functions properly.

How to use shortcut keys on wireless keyboard with ipad

Similar Messages

Maybe you are looking for