How to use Stored Procedure Call in Sender JDBC adapter
Hi All,
Could someone send me a blog on how to use Stored Procedure call in Sender JDBC adapter?
Xier
Hi Xler
refer these links
/people/yining.mao/blog/2006/09/13/tips-and-tutorial-for-sender-jdbc-adapter
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
Also, you can check Sriram's blog for executing Stored Procedures,
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
/people/jegathees.waran/blog/2007/03/02/oracle-table-functions-and-jdbc-sender-adapter
This blog might be helpfull on stored procedures for JDBC
JDBC Stored Procedures
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
Please go through these threads and see if it helps...
Re: How to execute Stored Procedure?
Re: Problem with JDBC stored procedure
Thnaks !!
Similar Messages
-
Using a stored procedure for a sender jdbc adapter
Hi all,
The requirement is to use a stored procedure, for extracting data from a oracle database.
Is it possible to do this.
If yes, what should be the source structure in this case.
Please help with the exact soln.
Thanks!!
YounusHi,
Did you check the blog pointed by Aamir?
/people/jegathees.waran/blog/2007/03/02/oracle-table-functions-and-jdbc-sender-adapter
You will need to use Oracle Functions instead of Oracle Stored Procedures. Read thru the blog and the note pointed in the blog . Think it is quite a good example.
Regards
Bhavesh -
How to use Stored Procedures in JDBC sender side and receiver side
Hello,
Can anyone explain how to use stored procedures in configuring the scenario using JDBC adapter at bothe sides sender nad receiver..
Thanks,
SooryaHi,
Refer the below link:
JDBC:
Receiver JDBC scenario MS access - /people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 --> for jdbc receiver: file -JDBC
Stored Procedures-
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
http://www.ics.com/support/docs/dx/1.5/tut6.html
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
http://www.ics.com/support/docs/dx/1.5/tut6.html
http://java.sun.com/docs/books/tutorial/jdbc/basics/sql.html
http://www.sqlteam.com/article/stored-procedures-an-overview
HI in the message mapping structure u need to specify the different action and also u need to specify the procedure name.
refer the below link which has all the associated action
http://help.sap.com/saphelp_nw04s/helpdata/en/22/b4d13b633f7748b4d34f3191529946/frameset.htm
Chirag -
HOW TO USE STORED PROCEDURES IN JASPERREPORTS(URJENT)
Hi,
i'm using jasperreports in struts based project. How to use stored procedures in jasperreports. pls send the solution urjent
Thanks in advance
rameshHi,
Refer the below link:
JDBC:
Receiver JDBC scenario MS access - /people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 --> for jdbc receiver: file -JDBC
Stored Procedures-
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
http://www.ics.com/support/docs/dx/1.5/tut6.html
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
http://www.ics.com/support/docs/dx/1.5/tut6.html
http://java.sun.com/docs/books/tutorial/jdbc/basics/sql.html
http://www.sqlteam.com/article/stored-procedures-an-overview
HI in the message mapping structure u need to specify the different action and also u need to specify the procedure name.
refer the below link which has all the associated action
http://help.sap.com/saphelp_nw04s/helpdata/en/22/b4d13b633f7748b4d34f3191529946/frameset.htm
Chirag -
How to use Stored Procedures in form 6i Blocks
Dear Friends,
I would like to know how to use Stored Procedures while creating blocks in Data Block Wizard in forms 6i application.
Please send me sample code of stored procedure.
Regards,
Khader.The Data Block Wizard is not for creating stored procedures. It will allow you to use a stored procedure in your form. See the help documentation for how to use the wizard.
Here's an example of a simple procedure. If you search the database forum or the web, you will find many examples.
CREATE OR REPLACE PROCEDURE procedure_name (value OUT NUMBER ) AS
BEGIN
SELECT COUNT(*) INTO value
FROM your_table;
END;
Message was edited by:
Mark Roberts -
How to use stored procedures in DIAdem and Can the stored procedures be used to return values?
Can anyone please tell me how to use stored procedures in diadem and to return values from it. Its really important, can you please answer it at the earliest.
Thanks In advance
spiyaHi Spria,
I'm very sorry for the mix-up, I thought Allen was going to answer you back with the particulars that we found out. Check out the attached Word document and the below tidbits:
The built-in DIAdem ODBC functions {SQL_...()} can only call stored functions, which return a scaler result {found then in SQL_Result(1,1)}. The syntax for this with an ORACLE db is
"select function(parameters) from package"
...where package defaults to "dual" if you don't use your own package.
There might be exceptions to that though, and the syntax will be different for other databases. Note that stored ORACLE procedures can NOT be called from the ODBC functions, instead you must use either ADO function calls in the DIA
dem VBScript or the OO4O COM wrapper that ORACLE provides (this is described in further detail in the below Word document).
Hope this helps,
Brad Turpin
DIAdem Product Support Engineer
National Instruments
Attachments:
Calling_ORACLE_Stored_Procedures_from_DIAdem.doc 28 KB -
How to use Stored Procedures in Sender JDBC Adapter.
Hi Experts,
we are having a lot of legacy application which are on .Net. basicaly using MS SQL & stuff. As a Integration scenario we have to triggered some events from JDBC to XI. How can i do this. Secondly there are multiple tables from which i will be selecting a record & sending it to XI for further processing the Receiver Side we are having SAP system.
How can i use a Stored procedure in XI Sender Adapter ?
Can anybody tell me step by step how to get the XSD of Stored procudere & used in XI. ?
I am new to XI. I have not yet configured any sceneario.
Can anybody guide me step by step how to do this.
I am only intersted in Sender Side configuration.
Regards,
UmeshHey,
check this in the JDBC Sender Adapter Configuration
Query SQL Statement -> Specify an SQL EXECUTE statement to execute a stored procedure, which contains exactly one SELECT statement.
The expression must correspond to the SQL variant supported by the relevant JDBC driver. It can also contain table JOINs.
http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
JDBC adapter
/people/saravanakumar.kuppusamy2/blog/2005/01/19/rdbms-system-integration-using-xi-30-jdbc-senderreceiver-adapter
<b>Cheers,
*RAJ*
*REWARD POINTS IF FOUND USEFULL*</b> -
Reading using Stored Procedure Calls
Hi All,
I have a scenario where I need to read data froma table and post it to ECC. A stored procedure call is used to generate the data from the database. How do I handle this in sender JDBC adapter?
XIerHey
there are some restrictions on executing stored procedures for Oracle,anyways have a look at the following blog
/people/jegathees.waran/blog/2007/03/02/oracle-table-functions-and-jdbc-sender-adapter
Thanx
Aamir suhail -
How to use a atore procedure in the sender Jdbc adapter
Hi Experts!
I am having a requirement to read multiple data from multiple tables from Oracle database at a time.
In sender side i am using JDBC Adapter. Here i want to know how can we use a store procedure to do this and can any one pls give a blog which guide me in design.
Thanks in advance,
Preethi.Pleasae see this thread
Stored procedure in Sender JDBC Adapter
In space of select statement put
EXEC nameofstoredprocedure
and update statement
Put <TEST> -
How to use stored procedure in crystal report for eclipse
Hi;
I am working on crystal report for eclipse 2.0 and trying to use stored procedure in report .It is created from Oracle but it is not showing any dependencies
CREATE OR REPLACE procedure ACT_DB.getCostTransferDetails
p_In_Contract_ID varchar2 DEFAULT '*',
p_In_Status_ID varchar2 DEFAULT '*',
p_In_COST_TRAN_DATE varchar2 DEFAULT '*',
p_In_DEPT_ID varchar2 DEFAULT '*',
p_In_PROJECT_ID varchar2 DEFAULT '*',
p_In_EMPLOYEE_ID varchar2 DEFAULT '*',
p_Out_CostTransfer_Cusor OUT COST_TRANSFER_PACKAGE.COST_TRANSFER_TYPE
AS
BEGIN
OPEN p_Out_CostTransfer_Cusor FOR
SELECT
header.cost_tran_id,
header.cost_tran_date,
header.total_credit_amount,
header.total_debit_amount,
header.transfer_status,
header.updated_by,
header.added_by,
header.trf_over_ninety_days,
header.business_unit_id,
header.equip_approval,
header.batch_desc,
details.opr_unit_id,
status.status_id,
details.fund_code_id,
details.prgm_code_id,
details.class_id,
details.activity_id,
details.product_id,
details.status_id,
details.transaction_amount,
details.jrnl_date,
details.adjust_prcnt,
details.adjust_amnt,
details.details_equip_approval,
details.detail_desc,
details.account_id,
details.project_id,
details.dept_id,
details.contract_id,
details.reason_code_id,
details.jrnl_id,
employee.f_name,
employee.l_name,
employee.employee_id,
project.project_id,
project.project_status,
--header.transfer_status,
contracts.contract_desc
FROM header, details, status, employee, department, project, contracts
WHERE (header.cost_tran_id = details.cost_tran_id)
AND (header.cost_tran_date = details.cost_tran_date)
AND (header.transfer_status = status.status_id)
AND (department.dept_id = details.dept_id)
AND (department.dept_id = employee.dept_id)
AND (project.project_id = details.project_id)
AND (contracts.contract_id = details.contract_id)
AND (details.Contract_ID = p_In_Contract_ID OR p_In_Contract_ID ='*' )
AND (header.TRANSFER_STATUS = p_In_Status_ID OR p_In_Status_ID ='*' )
AND (TO_CHAR(details.COST_TRAN_DATE, 'MM/DD/YYYY') = p_In_COST_TRAN_DATE OR p_In_COST_TRAN_DATE ='*' )
AND (details.DEPT_ID = p_In_DEPT_ID OR p_In_DEPT_ID ='*' )
AND (details.PROJECT_ID = p_In_PROJECT_ID OR p_In_PROJECT_ID ='*' )
AND (header.ADDED_BY = p_In_EMPLOYEE_ID OR '*'=p_In_EMPLOYEE_ID )
Can any another way to make procedure
Thanx
Regards ,
AmolHi Amol,
Are you able to execute your stored procedure from oracle?.
- If "Yes" then use the Crystal Report XIR2 Designer to create the report.
- Import this report in the Crystal Report For Eclipse Workbench.
- The latest version for Crystal Report For Eclipse is SP1.
Please let me know the results.
Thanks,
Neeraj -
How to use stored procedures in postgresql
hiii,
if any body knows how to create a stored procedure in postgresql
please help meHi,
Refer the below link:
JDBC:
Receiver JDBC scenario MS access - /people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 --> for jdbc receiver: file -JDBC
Stored Procedures-
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
http://www.ics.com/support/docs/dx/1.5/tut6.html
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
http://www.ics.com/support/docs/dx/1.5/tut6.html
http://java.sun.com/docs/books/tutorial/jdbc/basics/sql.html
http://www.sqlteam.com/article/stored-procedures-an-overview
HI in the message mapping structure u need to specify the different action and also u need to specify the procedure name.
refer the below link which has all the associated action
http://help.sap.com/saphelp_nw04s/helpdata/en/22/b4d13b633f7748b4d34f3191529946/frameset.htm
Chirag -
How to use stored procedure with many return results and variable with perl
Hi everybody,
i´m writtting now a Perl programm, wich use a oracle stored procedure with more than 1 result and 1 variable(I have to return 2 variable fpr each result). I don´t now how I can get it.I already search the web but I didn´t find.
My example:
PROCEDURE get_projects_and_sub_projects (
v_project_id IN INTEGER,
v_project_c_id OUT INTEGER,
v_project_id_find OUT VARCHAR2
IS
BEGIN
SELECT c_id, proj_id
INTO
v_project_c_id,
v_project_id_find
FROM t_projet
WHERE t_projet .ksa_pro_art_kbz = 'KU'
AND t_projet.proj_id LIKE v_project_id || '%';
EXCEPTION
WHEN NO_DATA_FOUND
THEN
v_project_c_id := NULL;
v_project_id_find := NULL;
WHEN OTHERS
THEN
kmessages.error (NULL,
'get_projects_and_sub_projects',
'Project-Name: ' || v_project_id,
'Errornumber: '
|| SQLCODE
|| ' Error: '
|| SQLERRM,
TRUE,
TRUE
raise_application_error (-20001,
'Error '
|| SQLCODE
|| ' get_projects_and_sub_projects: '
|| SQLERRM,
TRUE
END get_projects_and_sub_projects;
in Perl Program:
sub get_projects_unterprojects_name($$){
my ($db_handle, $proj_name_id) = @_; #$db_handle ist the DB Connection return value
my $db_proj_c_id;
my $db_proj_name;
eval{ my $csr = $db_handle->prepare(q{
BEGIN
pro_doc_ber.get_projects_and_sub_projects(:proj_name_id, :db_proj_c_id, :db_proj_name);
END;
# parameter value
$csr->bind_param(":proj_name_id", $proj_name_id);
# return values
$csr->bind_param_inout(":db_proj_c_id", \$db_proj_c_id, 11);
$csr->bind_param_inout(":db_proj_name", \$db_proj_name, 20);
$csr->execute(); };
But this didn´t work. Could somebody give me some idea?
Thank you
FelxSome additional info would probably be helpful.
What is your programming enviironment? Java?
In any case I suspect that you will need to use the OCI to deal with specific Oracle types such as user defined object types -- thats not standard ANSI SQL.
In Java I believe you need to use OPAQUE, there are some examples out there. I'm mostly a PL/SQL developer with some Java expereince so others here are more qualifed to answer your question more directly. -
How to use stored procedure which returns result set in OBIEE
Hi,
I hav one stored procedure (one parameter) which returns a result set. Can we use this stored procedure in OBIEE? If so, how we hav to use.
I know we hav the Evaluate function but not sure whether I can use for my SP which returns result set. Is there any other way where I can use my SP?
Pls help me in solving this.
ThanksHi Radha,
If you want to cache the results in the Oracle BI Server, you should check that option. When you run a query the Oracle BI Server will get its results from the cache, based on the persistence time you define. If the cache is expired, the Oracle BI Server will go to the database to get the results.
If you want to use caching, you should enable caching in the nqsconfig.ini file.
Cheers,
Daan Bakboord -
HOW TO USE STORED PROCEDURE IN JDEVELOPER - TOPLINK
-- I really have problem try to do that!!!..
I put the code of adf guide for toplink but have two errors:
StoredProcedureCall call = new StoredProcedureCall();
call.setProcedureName("CHECK_VALID_POSTAL_CODE");
call.addNamedArgument("POSTAL_CODE");
call.addNamedArgumentValue("L5J1H5");
ValueReadQuery query = new ValueReadQuery();
query.setCall(call);
Number isValid = (Number) session.executeQuery(query);
error:
- call.addNamedArgumentValue("L5J1H5"); is not accepted
- session.executeQuery(query); there is no session var defined
Can someone tell me the correct form to call store procedure using a method for commandbutton??
Message was edited by:
user572789Hi Amol,
Are you able to execute your stored procedure from oracle?.
- If "Yes" then use the Crystal Report XIR2 Designer to create the report.
- Import this report in the Crystal Report For Eclipse Workbench.
- The latest version for Crystal Report For Eclipse is SP1.
Please let me know the results.
Thanks,
Neeraj -
How to use Stored Procedure in RPD
In the physical layer we have a option for procedure when we select a tables general tab.I created the procedure
but i am not able to retrieve values in the Dashboard.
Could anyone help me with this as how to use procedure.Oracle stored procedure don't return recordssets. You have to put the result of the stored procedure in a global temp table and reference the rpd to that table. the execution of the stored procedure can be triggerd form the "execute before query" part in the connection pool.
regards
John
http://obiee101.blogspot.com/
Maybe you are looking for
-
The download goes OK but the message box where you move the Firefox symbol to the Application logo does not come up automatically. I go to my desktop and click on the icon for Firefox 4.0 .dmg At this point one of two things occur, either there is a
-
How to populate the parameter selection with a formula
Post Author: jhartney CA Forum: Formula Confused or maybe just way to much coffee but I need some help here. I want to create a dynamic multiple select parameter field pulled from the database. The fields in the DB are FIRSTNAME and LASTNAME and I w
-
Why can I receive mail on my iPAD during my visit to the USA but not send mail?
Why can I receive mail on my iPad during my visit to the USA but not send mail?
-
Multiple Receivers for one interface
Hi All, In File-XI-File Scenario,there is a requirement in which we are getting a file from a location using Sender File Adapter, and based on the name of the file(<i>Which is a part of the message content, and we are going to remove it in Receiver F
-
6500 VSS Chassis in unknown state
Hi, we have 6500 chassises in our set up. But using CWLMS 4.0 , we are unable to manage VSS feature of 6500.Also User tracking for Nexus 7K Switches subnets are not working. Please guide. Rgrds, Soumik.