How to use TC as TC in my current wi-fi.

Hello,
I bought 2 TB TC this November. So it seems to be last model.
In my home i have wireless network. Router is TP - Link. Internet is plugged into this TP link router (l2tp connection).
So i want my TC join to my current TP-Link network. I tried to extend existing network in airport utility. But after this step my TC is not responsive.  It shows message that it couldn't connect to wireless network.
All my other actions to use it as separate wifi network didn't bring result. I got message : Error occurer while updating".
Please help me. Can you write steps to be done

Firstly you need a decent utility ..
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Install it directly if you have lion.
How to load 5.6 into ML.
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0
Now you have a decent utility..
Plug the TC into the computer by ethernet.. and press the reset to get rid of your old attempts.
go to manual setup.
Go to setup the TC in bridge mode.
Setup the wireless in this section.
Use either a simple name like the above.. or same SSID as the TP-Link uses.. but set the wireless channel to manual and use a different channel out of 1, 6, 11 to the TP-Link.. sometimes automatic setting works ok.
Use WPA2 Personal security.. this picture is wrong is still using both wpa/wpa2.
Update the settings and plug it into the TP-Link with ethernet to WAN port.. (this is for ease to determine what goes where.. as WAN is no longer important in bridge. )
Then plug

Similar Messages

  • How to use time machine to replace the current iMovie for one a few weeks ago?

    I have a movie in iMovie that somehow became unusable.  The size says it is 10GB when it should only be about 1GB.  I have been to the Genius Bar for a total of 4 hours and the only solution we can find is to REMAKE the entire movie.  They say that one or more of my movie clips must have imbedded data that it shutting the whole iMovie program down.  They say there is no way to know which clip is causing the problem.  I really don't want to remake the entire 2 hour movie.  I tried to use time machine and found my movie from about 3 weeks ago (before it ballooned to 10GB--so I guess before I added the bad clip) and I just wanted to replace my current one with this version and just fill in the last 3 weeks of data.  However I can't seem to do this.  Does anyone know how to do this using iMovie '08?

    sheri69 wrote:
    I tried to use time machine and found my movie from about 3 weeks ago (before it ballooned to 10GB--so I guess before I added the bad clip) and I just wanted to replace my current one with this version and just fill in the last 3 weeks of data.  However I can't seem to do this.  Does anyone know how to do this using iMovie '08?
    You don't do it with iMovie, but with Time Machine.
    Quit iMovie, then locate and select the file you want to restore in your backups via the "Star Wars" display and click the Restore button.  See #15 in Time Machine - Frequently Asked Questions.

  • How to use previous year keyfigure data in current year for other keyfig

    Hi Expert,
    I have 1 requirement wherein I need to use previous year data for some keyfigure calculation.
    Details are as follows:
    I have designed query with CKFs Turnover & UVG (in rows) & Fiscal year period in columns.
    Suppose Keyfigure Turnover data is displayed from Apr2009 to Mar 2011. In UVG: for Apr 2010, i need Turover data of month Apr 2009, for May 2010 turnover data of May 2009 similarly for other months.
    As per my understanding, I need to use customer exit which will store kf turnover data in internal table & in turn it will be used for UVG.
    But I'm not able to put it into syntax.
    Kindly suggest your inputs in this scenario.
    Thanks,
    Shamkant

    Hi
    Note that the variable ZCALCCALMTH is exit type and variable ZCALMTHREF is ready for input.
    WHEN 'ZCALCCALMTH'.
    IF i_step = 2. "après le popup
    READ TABLE i_t_var_range INTO loc_var_range WITH KEY vnam = 'ZCALMTHREF'.
    IF sy-subrc = 0.
    CLEAR l_s_range.
    year1(4) = loc_var_range-low(4).
    year1(4) = zyear1(4) - 1.
    zmonth1(2) = loc_var_range-low+4(2).
    CONCATENATE zyear1(4) zmonth1(2) INTO loc_var_range-low(6).
    zyear2(4) = loc_var_range-high(4).
    zyear2(4) = zyear2(4) - 1.
    zmonth2(2) = loc_var_range-high+4(2).
    CONCATENATE zyear2(4) zmonth2(2) INTO loc_var_range-high(6).
    l_s_range-low = loc_var_range-low(6).
    l_s_range-high = loc_var_range-high(6).
    l_s_range-sign = 'I'.
    l_s_range-opt = 'BT'.
    APPEND l_s_range TO e_t_range.
    ENDIF.
    ENDIF.
    bye
    Boujema

  • Does anyone know how to use ELVIS in Labview to get current and voltage measurements?

    Trying to use ELVIS in Labview to get measurements with a NI myDAQ.

    I have changed from using the ELVISmx driver as I was unable to call on the digital multimeter of the myDAQ twice, I have set up a VI using the DAQ assistant with the myDAQ, I am using the AI0 port for a voltage reading and using the DMM for my current reading, the circuit is working as I am measuring the voltage on a resistor after the ammeter but I am unable to get a current reading in order for it to work. If I have something wired wrong please let me know, thank you. My circuit is a 12VAC power supply, going through a potentiometer to drop the voltage to 8VAC, which passes through a resistor, ammeter is in series after this and attached to another resistor to complete my loop, the AI0 for my volt meter is connected across the second resistor, I have the proper voltage reading when I run the VI, but am unable to get a current input. Thanks for the help.
    Attachments:
    Mikes Project2.vi ‏131 KB

  • How to use one email adress for multiple recipients

    Hello,
    I'd like to know how to use one email adress for multiple recipients. 
    this would be very useful or projects. for example;
    if i send one mail to [email protected], all people in this project get an email.
    I will add the people in this project myself. 
    I know it is possible, but I don't know how to do it ;-)
    please help me! 

    Hope this help.
    _http://technet.microsoft.com/en-us/library/cc164331(v=exchg.65) .aspx

  • Can't figure out how to use home sharing

    Since the latest couple iTunes updates, my family and I can not figure out how to use home sharing. Everyone in our household has their own iTunes, and for a long time we would just share our music through home sharing. But with the updates, so much has changed that we can no longer figure out how to use it.
    I have a lot of purchased albums on another laptop in the house, that im trying to move it all over to my own iTunes, and I have spent a long time searching the internet, and everything. And I just can't figure out how to do it. So.... how does it work now? I would really like to get these albums from my moms iTunes, onto mine. I would hate to have to buy them all over again.
    If anyone is able to help me out here, that would be great! Thanks!

    The problem im having is that after I am in another library through home sharing, I can't figure out how to select an album and import it to my library. They used to have it set up so that you just highlight all of the songs you want, and then all you had to do was click import. Now I don't even see an import button, or anything else like it. So im lost... I don't know if it's something im doing wrong, or if our home sharing system just isn't working properly.
    Thanks for the help.

  • How to use the same POWL query for multiple users

    Hello,
    I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
    "Query 'ABC' is already open in another session."
    where 'ABC' is the query name.
    Can you please tell me how to use the same POWL query for multiple users ?
    A fast reply would be highly appreciated.
    Thanks and Regards,
    Sandhya

    Batch processing usually involves using actions you have recorded.  In Action you can insert Path that can be used during processing documents.  Path have some size so you may want to only process document that have the same size.  Look in the Actions Palette fly-out menu for insert path.  It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

  • How to use airport time capsule with multiple computers?

    I'm sure there are some thread about this but i couldn't find it... so sorry for that but hear me out! =)
    I bought the AirPort Time Capsule to back up my MBP
    And so i did.
    then i thought "let give this one a fresh start" so i erased all of it with the disk utility and re-installed the MBP from the recovery disk.
    I dont want all of the stuff i backed up just a few files and some pictures so i brought that back.. so far so good.
    Now i want to do a new back up of my MBP so i open time machine settings, pick the drive on the time capsule and then "Choose" i wait for the beck up to begin, and then it fails.  It says (sorry for my bad english, im swedish haha) "the mount /Volume/Data-1/StiflersMBP.sparsebundle is already in use for back up.
    this is what i want:
    i want the "StiflersMBP.sparsebundle" to just be so i can get some stuf when i need them. it's never to be erased.
    i want to make a new back up of my MBP as if it's a second computer...
    so guys and girls, what is the easiest and best solution?
    Best regards!

    TM does not work like that.
    If you want files to use later.. do not use TM.
    Or do not use TM to the same location. Plug a USB drive into the computer and use that as the target for the permanent backup.
    Read some details of how TM works so you understand what it will do.
    http://pondini.org/TM/Works.html
    Use a clone or different software for a permanent backup.
    http://pondini.org/TM/Clones.html
    How to use TC
    http://pondini.org/TM/Time_Capsule.html
    This is helpful.. particularly Q3.
    Why you don't want to use TM.
    Q20 here. http://pondini.org/TM/FAQ.html

  • How to use multiple ipods on one account

    I have an Ipod classic and just bought my sons two nano's how do I use these on the same account without changing my account info?

    Take a look here:
    How to use multiple iPods with one computer
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
    Regards.

  • How to use a Table View in AppleScriptObjC

    How can I use a table view and add data to it? And how can I display a button cell and image cell in the table? Thanks.

    Hi all,
    Actually i need some more clarification. How to use the same select statement, if i've to use the tabname in the where clause too?
    for ex : select * from (tab_name) where....?
    Can we do inner join on such select statements? If so how?
    Thanks & Regards,
    Mallik.

  • How to use '|' delimited as seprator in GUI_DOWNLOAD ? Plz suggest me ,,

    how to use '|' delimited as seprator in GUI_DOWNLOAD ? Plz suggest me ,,
    i want the output should be seprated by '|' delimited when i download the file.

    Hi,
    We will pass the seperator to the WRITE_FIELD_SEPARATOR parameter as
    CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
    filename = v_file
    write_field_separator = '|'
    TABLES
    data_tab = itab[] . "Our internal talbe filled with data
    Re: Why Function GUI_DOWNLOAD can create XML file but not a flat file?
    Award points if useful
    Thanks,
    Ravee...

  • ** How to use TO_DATE function in Stored Proc. for JDBC in ABAP-XSL mapping

    Hi friends,
    I use ABAP-XSL mapping to insert records in Oracle table. My Sender is File and receiver is JDBC. We use Oracle 10g database. All fields in table are VARCHAR2 except one field; this is having type 'DATE'.
    I use Stored procedure to update the records in table. I have converted my string into date using the Oracle TO_DATE function. But, when I use this format, it throws an error in the Receiver CC. (But, the message is processed successfully in SXMB_MONI).
    The input format I formed like below:
    <X_EMP_START_DT hasQuot="No" isInput="1" type="DATE">
    Value in Payload is like below.
    <X_EMP_START_DT hasQuot="No" isInput="1" type="DATE">TO_DATE('18-11-1991','DD-MM-YYYY')</X_EMP_START_DT>
    Error in CC comes as below:
    Error processing request in sax parser: Error when executing statement for table/stored proc. 'SP_EMP_DETAILS' (structure 'STATEMENT'): java.lang.NumberFormatException: For input string: "TO_DATE('18"
    Friends, I have tried, but unable to find the correct solution to insert.
    Kindly help me to solve this issue.
    Kind Regards,
    Jegathees P.
    (But, the same is working fine if we use direct method in ABAP-XSL ie. not thru Stored Procedure)

    Hi Sinha,
    Thanks for your reply.
    I used the syntax
    <xsl:call-template name="date:format-date">
       <xsl:with-param name="date-time" select="string" />
       <xsl:with-param name="pattern" select="string" />
    </xsl:call-template>
    in my Abap XSL.  But, its not working correctly. The problem is 'href' function to import "date.xsl" in my XSLT is not able to do that. The system throws an error. Moreover, it is not able to write the command 'extension-element-prefixes' in my <xsl:stylesheet namespace>
    May be I am not able to understand how to use this.
    Anyway, I solved this problem by handling date conversion inside Oracle Stored Procedure. Now, its working fine.
    Thank you.

  • Sender Mail Adapter - S/MIME - How to use it?

    Hi guys,
    I am trying to figure out how to use the S/MIME security parameter of the Sender Mail Adapter in PI 7.1.
    Could anyone point me to some useful documentation/examples/blogs ?
    Or perhaps explain what steps are involved when configuring this parameter?
    We are pulling emails from an Microsoft Exchange server.
    Many thanks,
    Aldo

    First of all one sender mail adapter has to be tight with a specific sender email address.
    The email has to be decrypted as whole, you cannot decrypt parts of it.
    Then you store certificates to secure store in J2EE server and point to it in send agreement, this should be equal to HTTPS setup
    Check security guide:
    http://help.sap.com/saphelp_nwpi71/helpdata/EN/f7/c2953fc405330ee10000000a114084/frameset.htm

  • How to use Logical database in function module?

    I will create a function module in HR.
    but how to use Logical database  in function module ?  Logical database PNP always show screen.in function (RFC) code , it is a matter.

    You cannot attach the LDB to the main program of the function group.
    - So you may [SUBMIT|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=submit&adv=false&sortby=cm_rnd_rankvalue] a report which use the LDB and get back the data (export/import), by default in the syntax of SUBMIT the selection-screen will not be displayed
    - Use [LDB_PROCESS|https://www.sdn.sap.com/irj/sdn/advancedsearch?query=ldb_process&cat=sdn_all], fill a structured table for selection, and get data back in another table
    - Use [HR function modules to read Infotypes|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=hrfunctionmodulestoread+Infotypes&adv=false&sortby=cm_rnd_rankvalue].
    Regards

  • How-to use Excel for the XML file input?

    Hello all,
    Following our discussion with Gerhard Steinhuber on the very nice tutorial from Horst Schaude , "How to upload mass data via XML File Input" , I am starting this new discussion.
    In the comments section of this previous cited tutorial, Rufat Gadirov explains how to use a generated XML from Eclipse instead of your XSD file as your source in Excel.
    However, in spite of all the instructions, I am still facing the same issue in Excel when I try to save my file as XML : "The XML maps in this workbook are not exportable".
    What I try to do is to create one or more Sales Orders with multiple Items in it from a XML File Input, using excel to enter data.
    The part with the File input is working (if I directly upload my file to the webDAV, it creates a sales order instance with multiple items).
    The only missing part is the Excel data input that I cannot make work. Any help on this matter would be greatly appreciated.
    Here is my XML file that I try to use as a source in Excel before inputing data from Excel:
    <?xml version="1.0" encoding="UTF-8"?>
    <p:MySalesOrderUploadedIntegrationInputRequest xmlns:p="http://001365xxx-one-off.sap.com/YUUD0G3OY_" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    <MessageHeader>
        <CreationDateTime>2015-03-02T12:00:00.000Z</CreationDateTime>
    </MessageHeader>
        <List actionCode="01" listCompleteTransmissionIndicator="true" reconciliationPeriodCounterValue="0">
            <MySalesOrderUploaded>
              <MySalesOrderUploadedID>idvalue0</MySalesOrderUploadedID>
              <MyBuyerID schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeID="token">token</MyBuyerID>
              <MyDateTime>2015-03-02T12:00:00.000Z</MyDateTime>
              <MyName languageCode="EN">MyName</MyName>
              <MyBillToParty schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeAgencySchemeID="token" schemeID="token">token</MyBillToParty>
              <MyDateToBeDelivered>2001-01-01</MyDateToBeDelivered>
              <MyEmployeeResponsible schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeAgencySchemeID="token" schemeID="token">token</MyEmployeeResponsible>
              <MySalesUnit schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeAgencySchemeID="token" schemeID="token">token</MySalesUnit>
                <MyItem>
                    <MyItemID>token</MyItemID>
                    <MyItemProductID schemeAgencyID="token" schemeID="token">token</MyItemProductID>
                    <MyItemDescription languageCode="EN">MyItemDescription</MyItemDescription>
                    <MyProductTypeCode>token</MyProductTypeCode>
                    <MyRequestedQuantity unitCode="token">0.0</MyRequestedQuantity>
                    <MyConfirmedQuantity unitCode="token">0.0</MyConfirmedQuantity>
                    <MyNetAmount currencyCode="token">0.0</MyNetAmount>
                </MyItem>
            </MySalesOrderUploaded>
            <MySalesOrderUploaded>
              <MySalesOrderUploadedID>idvalue0</MySalesOrderUploadedID>
              <MyBuyerID schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeID="token">token</MyBuyerID>
              <MyDateTime>2015-03-02T12:00:00.000Z</MyDateTime>
              <MyName languageCode="EN">MyName</MyName>
              <MyBillToParty schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeAgencySchemeID="token" schemeID="token">token</MyBillToParty>
              <MyDateToBeDelivered>2001-01-01</MyDateToBeDelivered>
              <MyEmployeeResponsible schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeAgencySchemeID="token" schemeID="token">token</MyEmployeeResponsible>
              <MySalesUnit schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeAgencySchemeID="token" schemeID="token">token</MySalesUnit>
                <MyItem>
                    <MyItemID>token</MyItemID>
                    <MyItemProductID schemeAgencyID="token" schemeID="token">token</MyItemProductID>
                    <MyItemDescription languageCode="EN">MyItemDescription</MyItemDescription>
                    <MyProductTypeCode>token</MyProductTypeCode>
                    <MyRequestedQuantity unitCode="token">0.0</MyRequestedQuantity>
                    <MyConfirmedQuantity unitCode="token">0.0</MyConfirmedQuantity>
                    <MyNetAmount currencyCode="token">0.0</MyNetAmount>
                </MyItem>
            </MySalesOrderUploaded>
        </List>
    </p:MySalesOrderUploadedIntegrationInputRequest>
    Thank you all for your attention.
    Best regards.
    Jacques-Antoine Ollier

    Hello Jacques-Antoine,
    I suppose that as you have tried to construct a map from the schema, you have taken the elements from the List level down. In this case I also can't export the map.
    But if you take the elements from the level MySalesOrderUploaded down, you'll get the exportable map (screenshots)
    Best regards,
    Leonid Granatstein

Maybe you are looking for