How to use the Commission Payable feature?

Hi all,
I need to use the commissions payable feature under products to allocate a % commission to suppliers. the features description looks great, but I can't work out if this feature is actually working. Going by a post from last year it might not be working at all (http://forums.adobe.com/message/4371219#4371219)?
Does anyone know if it works or if there's a work around that would achieve the same result (a report that lists commissions per product)?
Much appreciated!
Jerun

nothing is a basic question here. we are all at different levels of technological ability.
did you set up your wi-fi? i ask this because you need to know if it is encrypted or not. if it is, you will need the password which was set up at the time to allow access to your network.
IF it isn't encrypted, your network is accessible to anyone within range. go into your ipod, settings, wifi, turn it on. it should find your network. if there is a padlock there it is encrypted.
you may also need to know if the mac filtering is enabled, (you should be able to find out this by going into your router's settings). if it is, you will need to add your ipod's mac address to the router. you can find the mac address on your ipod - just go to settings, general, about. at the bottom is a 'wi-fi' address.
hope that helps you get somewhere, shout up if you have any problems.

Similar Messages

How to use the read out feature to read Korean or Arabic

I am now using Acrobat 11.And I want to use the read out loud feature to read the Korean charactors or Arabic.
But only the English words can be read in my computer.
Could some please tell me how to read other country languages besides English?
Thanks.
Have a good day.

Hello Gerd.
I have posted this question at Francois site. No answer yet.
Anyone familiar with the LAF project might be aware of what i'm talking about.
I don't believe questions about this project are not to be answered on this forum. Indeed i've found and posted some questions myself about it and get answered before.
Regards, Luis ...!

Using the New Video Features in Photoshop CS6 | Photoshop CS6 Feature Tour | Adobe TV

Adobe Digital Imaging Evangelist Julieanne Kost shows how to use the new video features in Photoshop CS6.
http://adobe.ly/I5cUF2

I am removing a dust spot from video clips taken during an aerial shoot. I have discovered that the only effective way to remove these spots effectively is to use PS6 and go frame by frame using the paint brush, clone stamp, and spot healing brush. It is very time consuming and mind numbing but the only thing that works with all tha movement of the aircraft and the ground below.
My question:
Right now to advance the clip one frame at a time - I must magnify the time line so to see the frame by frame lables. To advance to the next frame I must remove my cursor from the work area and go down to the time line and click on the next frame.
How can I advance to the next frame with a keyboard stroke and not move my cursor out of the work area?
Thank you in advance for any help.
Tony

How to use the "identify" feature in new 6.3.1 airport utility?

how to use the "identify" feature in new 6.3.1 airport utility?
so you can find the basestations in larger networks?

There is a workaround, which is to use Airport Utility 5.6.
I can confirm that 5.6 will run on 10.8.4 Mountain Lion, it will recognize the new 2013 Airport Extreme Base Station (A1521) running firmware 7.7.1, and it will give you access to view the device's Log & Statistics, DHCP Clients, and Profiles.
Four caveats:
1) The easiest way to install it is to download the app itself, not an installer or through the App Store. There is a page here where you can download the app: http://coreyjmahler.com/2013/03/08/airport-utility-5-6-on-os-x-v10-8-mountain-li on/ This way, you still have both versions, Airport Utility 6.x.x and 5.6.
2) When you launch 5.6, you'll get a message saying a newer version is available and asking if you want to update. Click Cancel to proceed into the utility.
3) When you click the Manual Setup button in 5.6, you'll get a warning dialog that "This version of AirPort Utility doesn't support this AirPort wireless device and might improperly configure the device if you continue to use it. Check www.apple.com/support/airport for the latest version of AirPort Utility." You can click Continue to get into the utility without issue.
4) You should probably only use 5.6 to view the additional status details. I have not tried to modify and save any AEBS settings using 5.6. There are other discussions here in the forums indicating that attempting to save settings via 5.6 that are no longer available in 6.3.1 will not actually save the settings to the AEBS even if both utilities indicate that the settings are changed. See https://discussions.apple.com/message/22677993#22677993
So, even though you can't use it to modify settings no longer available in Airport Utility 6.3.1, using Airport Utility 5.6 to view DHCP clients, Logs and Statistics is very useful for troubleshooting network issues.
PS - There are two ways to get to the DHCP Clients list, neither of which is obvious The first is to go to the Airport pane -> Summary tab and click on the "Wireless Clients:" label in the Summary display. All of the labels from "Wireless Mode:" down on the Summary display operate as links to view/edit the corresponding info/settings, which is also not obvious at first glance. Also not obvious, clicking on "Wireless Clients:" actually brings up a new pane with three tabs: Logs, Wireless Clients, and DHCP Clients. You can also get to the same pane by going to the Advanced pane and clicking on the Logs and Statistics button.
I hope this is helpful information. Took me a while to find out how to do this.

HOW TO USE THE PANORAMA FEATURE IN IPHONE 4S, HOW TO USE THE PANORAMA FEATURE IN IPHONE 4S

HOW TO USE THE PANORAMA FEATURE IN IPHONE 4S?

There is no current panorama feature. When iOS 6 is released (Sept. 19) we will find out.

How can I add a hyperlink to a PDF with OSX 10.9? The "Help" article says to use the "add link" feature under "edit." It's not there.

How can I add a hyperlink to a PDF with OSX 10.9? The "Help" article says to use the "add link" feature under "edit." It's not there. I could add links w/ the previous OS. Time sensitive project.

Which application are you using?
Clinton

Can someone tell me please how to use the features...

Hi all,
Can someone tell me please how to use the features on the HS-47 headset?
That is, what functions does the button control and how many presses of the button for each function, etc?
The headset was as supplied with my 6200.
I've tried looking for a user guide but I don't think there is one.
Many thanks,
Steve.

I think it's pretty basic.
If you are listening to music on your phone, it should automatically mute it when a call comes in. A basic press of the call answer / end button should then do just that.
Have a go! You could try experimenting with a quick double press, that may recall the last number you dialled, but otherwise that's probably it.

I am using Photoshop CC2014 15.00. In the pop-up menu for the Fill command there is a place for Scripted patterns. Within that part, the tree and the picture frame are grayed. Why?   I've seen demonstrations on how to use the feature but mine doesn't wo

I am using Photoshop CC2014 15.00. In the pop-up menu for the Fill command there is a place for Scripted patterns. Within that part, the tree and the picture frame are grayed.
Why?   I've seen demonstrations on how to use the feature but mine doesn't work. I checked the updates and I have the current version.
Thanks.      LM

I am running CC 2014.2.1 and I've updated to Yosemite. Not seeing tree or frame as an option in the menu. Coworker still on Mavericks has it.

IPhone 5S IOS 8. Can't figure out how to disable the "live" location feature within the native calendar app used for mapping/travel time. Have looked everywhere and it's driving me nuts. Thanks for any help on where to make the change!!

iPhone 5S IOS 8. Can't figure out how to disable the "live" location feature within the native calendar app used for mapping/travel time etc. Have looked everywhere and it's driving me nuts. Thanks for any help on where to make the change!!

iPhone 5S IOS 8. Can't figure out how to disable the "live" location feature within the native calendar app used for mapping/travel time etc. Have looked everywhere and it's driving me nuts. Thanks for any help on where to make the change!!

I am visually impared and use the voice over feature. Somehow the screen curtain" has been turned ON and I cannot find out how to disable it withouut turning voice over OFF. I'm really in the dark now.

I am visually impared and use the voice over feature. Somehow the screen curtain" has been turned ON and I cannot find out how to disable it withouut turning voice over OFF. I'm really in the dark now.
Thanks in advance for any helpposted.

How to reset iPod
iPod Troubleshooting Assistant
Finding the "Five Rs" of iPod troubleshooting
iPod troubleshooting basics and service FAQ

HT1689 can anyone simply tell me how to use the "find my ipod" feature through my itunes account that has the ipod registered?

Can anyone tell me how to use the "find my ipod" app that I have for my ipod? I have the ipod registered on my itunes account but I can get the serial # to send it in for apple support? How does this feature work? Thanks

Turn on your computer.
Open your Browser.
Go to icloud.com
Select find my iphone/ipod

How can I use the hardware compare feature of the 6551 card to trigger scripts

I can dynamically and seamlessly generate different waveforms by triggering different scriptTriggers that drive one or more of the 4 PFI lines. However, I need to evaluate a channel at a specific location or locations set by a script marker in real-time and generate a different waveform stored in on-board memory based on the result of the evaluation. I have attempted to use the hardware compare feature without any success. I am trying to dynamically respond to an I2C device based on the ACKs or NACK response of the device under test. Can the 6551 card accomplish this? Has anyone successfully tested an I2C or SMBus communication stream with 6551 card?

Hello,
I can understand why hardware compare did not work out for you application. Hardware compare uses a signal that was generated to make a digital pattern and then waits a few clock cycles before acquiring the signal that needs to be compared to the digital pattern.
I would look into using a script trigger to evaluate the channel value, where the script structure controls when it is evaluated. Please note that script triggers will need to be cleared after they are detected for reasserting. Some script syntax actually clear the script trigger and then use a wait until script trigger structure. Please refer to the HS DIO Help for documentation on Common Scripting Use Cases.
Please provide us with further details about your application. The more information, the better! I was not too clear on what you where wanting to evaluate and where is it coming from.
I would also like to mention that National Instruments has a NI USB 8451 which is capable of I2C communication.
NI USB 8451
Samantha
National Instruments
Applications Engineer

How to use the same services-config for the local and remote servers.

My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
    <services>
        <service id="amfphp-flashremoting-service"
            class="flex.messaging.services.RemotingService"
            messageTypes="flex.messaging.messages.RemotingMessage">
            <destination id="amfphp">
                <channels>
                    <channel ref="my-amfphp"/>
                </channels>
                <properties>
                    <source>*</source>
                </properties>
            </destination>
        </service>
    </services>
    <channels>
    <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    </channel-definition>
    </channels>
</services-config>
I think the problem is the line
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
but I'm not sure how to use the same services-config for the local and remote servers.

paul.williams wrote:
You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
Hi Paul,
In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
-services=path/to/services-config.xml
IF
services-config.xml
have tokens in it and user have not specified additional
-context-root
and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
-services=path/to/services-config.xml
have been specified durring compilation.
I dont know any better way to exmplain this, but in summary there is two places that you can tell swf about service confogiration,
1) pass -services=path/to/services-config.xml parameter to compiler this way you tell swf file up front about all that good stuff,
or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

How to use the function module 'HR_ES_FEATURE_BACKFIELD'

Hi,
How to use the function module 'HR_ES_FEATURE_BACKFIELD'?
I need the usage from both technical as well as functional point of view.
What is the use of this function module and technically how it is to be used to retrieve a feature for a particular employee.

hey iam from functional side can u be little bit clear of that feature
thanks
sikindar

Where Can I Go To Find Out How To Use New iOS 4 Features?

I have just updated my ipod touch to ios 4. I have the wallpaper feature so I am presuming the rest of the features should work. How to I find out how to use the other features such as App folder options, Multitasking etc as I can't seem to be able to ??
Thanks in advance to anyone who may be able to help

Start Here. Search Google.
You must have a 3G or later model to use multi-tasking and some other features.
Message was edited by: Kappy

How to use the Commission Payable feature?

Similar Messages

Maybe you are looking for