How to use the Digital Audio in & out RCA jacks a6010n

On the lower right of the back of my Pavillion a6010n desktop, above the mouse and keboard connections and below the monitor connection are two RCA jacks labeled Digital Audio in and out. The top one has an orange insulator and is labeled "out", and the lower one has a black insulator and is labeled "in". I have been unable to find any information about these or how to use them. Can anyone please tell me or direct me to information about this? I have Vista Home Premium 32 bit and have added a Sound Blaster Audigy sound card which is cheap but has a better S/N ratio. In Control Panel --> Sound the digital output for the sound card is listed but there is nothing about the Digital Audio jacks I would like to be able to use. Thank you all.

Yes there is. I suggest trolling these boards for the 3rd party remote solutions that will free you to use the remote in ANY application like Winamp, Notepad, Windows Media Player, etc.
Just my two opinionated cents...

Similar Messages

Can someone tell how to use the digital av adapter to hook up my iPod to the tv

Can someone tell me how to use the digital av adapter with my iPod to the tv

Per this YouTube discussion it appears it does not nsupport TV out, only mirroring
https://productforums.google.com/forum/#!searchin/youtube/tv$20out/youtube/wbm8v 35tbyg/ULbLJ3sAnVUJ

How to keep the digital audio ouptut alive?

I'm connecting my MBP audio via the optical digital audio connection and the digital stream disconnects after a short time (30 seconds? I haven't timed it.) whenever there's no audio coming out of the MBP: the optical actually stops transmitting (the LED goes dead).
When it disconnects, my audio system tells me there's no signal and whenever an audio event occurs, it wakes up and inevitably the top of the audio signal is missing, as there's not enough time for the receiver to "wake up" before the audio event happens. I've actually tested this on two systems and it does the same thing.
So, is there any way to keep the digital output alive, even if silent? I'm running powered with settings on "Performance" so there's no power-related reason for the digital audio to turn off. I haven't been able to find any other system settings that could help. Thanks for any pointers.

Hello,
I out a page before the page which takes long to load with the following xhtml tag:
    <xhtmlb:protectDoubleSubmit active = "true"
                                timer = "2500"
                                text   = "<img src='/sap/public/bc/ur/Design2002/themes/sap_tradeshow/common/loading/loading_ani.gif'>"
                                title = "De werklijst wordt geladen..." />
But the page is not kept alive. What does the parameter timer? Must it be set to 0?
With regards,
Frank

How to get a digital audio stream out of an iPad mini?

For the latest batch of devices that sport the new Lightning connector, is there a supported way to send S/PDIF PCM digital audio to a DAC or home theater receiver? There were docks for the traditional 30-pin connector that do this, but these are now presumably orphaned? Also, there was a trick with the Camera Connection Kit (CCK) to get USB audio, which would be fine too, but I'm not sure that can be done anymore.
So, do we need to wait for 3rd party docks and connectors to come to market, or is there an official Apple way to do this already?

i would carry to an apple retail store to fix it.
Peace, Clyde

I'm trying to use the digital in/out on my G5 with LogicPro

I've been trying to setup my G5 dual 2.0 (10.4.6) and LogicPro 7.2.1 using the digital in and out of the G5, the problem I'm having is that I cannot make the clock source stay as external, it keeps jumping back to internal even-though it is connected properly to my Digidesign 192 interface's lightpipe.
When I use the Motu 828 it locks to the 192's clock source just fine.
Is there something I'm missing, or is it just not possible?
Thanks in advance
Marcello Azevedo

Thanks for responding,
I'm using Protools on a different computer, all I need is to get the internal Digital In/Out of my G5 dual 2.0 to accept an external clock source, the clock source comes from a 192 I/O interface being used on a G5 dual 2.7 with Protools.
Thanks
Marcello Azevedo

New 15" HD PB's have digital audio in/out - what about older

I'm wondering if the digital audio in/out capability on the 15" is new to the HD 1.67's or was this on earlier models? I have a 1.25GHz and I'm guessing I don't have it on mine.
Thanks,
Tim

This feature has been introduced to 15" with the release of the new PBs.

Digital audio input via mini jack/toslink from ADA, monitored via USB audio output... is this do-able? I know digital audio input should be okay but how do I monitor it, apart from using the internal speakers?

Digital audio input via mini jack/toslink from ADA converter, monitored via USB audio output to amplifier... is this do-able? I know digital audio input should be okay but how do I monitor it, apart from using the internal speakers?

You can output audio thru HDMI, with appropriate adapter.
You can use additional cheap external usb audio for monitoring.

How to use the t-code vf31 tor taking print out of invoice

Hi,
How to use the t-code vf31 for taking print out,am getting an error like no message for initial processing exist,
venu

Hi,
Please find the steps
Output type                     RD00
Transmission medium             1
Sort order                      01
Processing mode                 1
Please give the oppropriate fields,
if the still error persists check the configuration in NACE transaction code.
thanks
Kuntla

How to use the "out" parameter in idl

hello.idl:
module HelloApp
interface Hello
string sayHello();
void getPass(in string name,out string pass);
HelloServer:
public class HelloServer
class HelloServant extends _HelloImplBase
public void getPass(String name,org.omg.CORBA.StringHolder pass)
System.out.println("Server pass = " + pass);
if (name.equals("lxh"))
pass = new org.omg.CORBA.StringHolder("1234");
if (name.equals("cbj"))
pass = new org.omg.CORBA.StringHolder("5678");
HelloClient:
public class HelloClient
public static void main(String args[])
try{
org.omg.CORBA.StringHolder Pass = null;
if (args.length == 1)
System.out.println("Client pass = " + args[0]);
helloRef.getPass(args[0],Pass);
System.out.println(Pass);
} catch(Exception e) {
When I run client main method with parameter "lxh",I will get a error says the getPass() parameter which has given is wrong.
How to use the out parameter in client?

Does this error only occurs if you pass "lxh" or always?
Did you try passing a StringHolder Object rather than a NULL Object?
Perhaps you can post the error message!?

How to use the out parameter of a transformation

Hi All,
I have a requirement where I need to move all the transformations from process flows to map.SO for each transformation I need to have 1 map which calls this transformation.I have 1 transformation which has both input and output parameter.If I use this transformation in mapping then how to use the out parameter of thsi transformation.This out parameter needs to beused in other mappings.Can soemone please help me.
Thansk in advance

Hi,
I'm not quite sure what you are trying to do.
What works: Connect the outgroup of a pre- or post-mapping process operator to the mapping output parameter operator..
What does not work: Connect the outgroup of an operator that can return more than one row (e.g. table operator, filter, joiner ,...) to the mapping output parameter operator. The mapping output parameter just returns "one row", like a pl/sql function call.
You cannot pass a "data stream" from one mapping to another. Maybe the pluggable mappings is what you are looking for.
Regards,
Carsten.

2 weeks trying to find out how to use the media live encoder in multi stream. And I can not find an

2 weeks trying to find out how to use the media live encoder 3.2 in multi
stream. And I can not find any clear instructions guide. Please from
my soul, taught me clearly, how I can stream to 2 different site
using live media encoder. what I do with ftml values and the other
one , wich everyone site give me, where should I put them, in what
order ... everything I tried, I got an error. I realy please you,
please !!!! thanks in advance !!

[Moved to Flash Media Live Encoder forum.]

How to use the BerkerleyDB22.out?

I have got the BerkerleyDB22.out by Tornado2.2.
But I couldn't find how to use the BerkeleyDB22.out in the VxWorks FAQ.
Is that correct that download the BerkeleyDB22.out into the target by Tornado and download the application into the target too?
In the appliction we can use the routine of Berkeley, right?
Thanks for your attention!

Hi Cruiser,
If you have successfully built Berkeley DB for VxWorks according to the instructions here:
http://www.oracle.com/technology/documentation/berkeley-db/db/ref/build_vxworks/intro.html
then you can build your project, and download BDB and your project onto the target.
You can use all the BDB features, with the exception of the DB_TRUNCATE flag for the DB->open() method call, according to the VxWorks notes and VxWorks FAQs:
http://www.oracle.com/technology/documentation/berkeley-db/db/ref/build_vxworks/notes.html
http://www.oracle.com/technology/documentation/berkeley-db/db/ref/build_vxworks/faq.html
Let us know if you need additional help.
Regards,
Andrei

My MACBOOK Pro turned out to be Snow Leopard, and later upgraded to LION. And update the EFI, I would like to replace the Snow Leopard, EFI can not boot, how do? How to use the Snow Leopard install disk to reduce EFI?

My MACBOOK Pro turned out to be Snow Leopard, and later upgraded toLION. And update the EFI, I would like to replace the Snow Leopard, EFIcan not boot, how do? How to use the Snow Leopard install disk to reduce EFI?

Do you mean some of your software does not work in Lion? Do you want to return to using Snow Leopard? If so, then do this:
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

How to add SPDIF/ digital audio to HP Pavilion dv4??

Is this possible with having to get the HP Dock?? I don't need any of the connections on the HP Dock except for the SPDIF/ digital audio one. Is there another type of adapter I can purchase? Thanks.

I understand you want to know how to use your dolby audio.
Have you tried installing the newest audio driver found here? The driver includes the dolby software and the IDT audio control panel should have separate adjustments available for Dolby. With the driver installed, try opening the IDT audio control panel and verify if that functionality is present.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

How to use the Digital Audio in & out RCA jacks a6010n

Similar Messages

Maybe you are looking for