How to use the function module 'HR_ES_FEATURE_BACKFIELD'
Hi,
How to use the function module 'HR_ES_FEATURE_BACKFIELD'?
I need the usage from both technical as well as functional point of view.
What is the use of this function module and technically how it is to be used to retrieve a feature for a particular employee.
hey iam from functional side can u be little bit clear of that feature
thanks
sikindar
Similar Messages
-
How to use the function module ....
hi
how to use the function module ssf_function_module_name in smartformsHi..
If you are using this Function module, you can get the generated function module name of smartform dynamically. It is good progrmaming practice to get the fucntion module name dynamically because there might be some problems if you are hard coding in program.
This will return the name of the function module and then from the exporting parameters you can use the fucntion module name to pass parameters to Smartforms.
Check this link.I am expalining here how to use this function module.
https://wiki.sdn.sap.com/wiki/pages/pointstab/viewpageversion.action?pageId=36109&version=2
Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
<b>Reward points if useful</b>
Regards
Ashu -
How to use the function module /IRM/IPBB_AGREEMENT_CREATE.
Hi all,
Please help me how to use the function module /IRM/IPBB_AGREEMENT_CREATE.
It is a Vistex fuction module which is used to create Sales contract in SAP-Vistex. If anyone has use the function module and do have the sample code please share it.
Thanks.FORM create_agreement TABLES pt_agreement
CHANGING po_agreement .
CONSTANTS: c_strt_knumh TYPE knumh VALUE '0000000000'.
DATA: lc_kona TYPE /irm/s_gkona,
lc_cbasp TYPE /irm/s_ipcbasp,
lt_cbapr TYPE /irm/t_ipcbapr, "Partners
lc_cbapr TYPE /irm/s_ipcbapr,
lt_cbadt TYPE /irm/t_ipcbadt, "Dates
lc_cbadt TYPE /irm/s_ipcbadt,
lt_cbafs TYPE /irm/t_ipcbafs,
lc_cbafs TYPE /irm/s_ipcbafs,
lt_cbacn TYPE /irm/t_ipcbacn,
lc_cbacn TYPE /irm/s_ipcbacn,
lt_cbacl TYPE /irm/t_ipcbacl,
lc_cbacl TYPE /irm/s_ipcbacl,
lt_cbtpv TYPE /irm/t_ipagtpv,
lc_cbtpv TYPE /irm/s_ipagtpv,
lt_texts TYPE text_lh,
lc_texts TYPE itclh,
lt_cbasd TYPE /irm/t_ipcbasd,
lc_cbasd TYPE /irm/s_ipcbasd,
lc_agreement TYPE /irm/s_ipcbasp_doc,
lc_e_log_number TYPE balognr,
lt_messages TYPE /irm/t_gprolog.
DATA: lt_vake TYPE cond_vakevb_t,
lc_vake TYPE LINE OF cond_vakevb_t,
lt_konh TYPE /irm/t_gkonh,
lc_konh TYPE LINE OF /irm/t_gkonh,
lt_konp TYPE /irm/t_gkonp,
lc_konp TYPE LINE OF /irm/t_gkonp,
lt_konw TYPE /irm/t_gkonwu,
lc_konw TYPE LINE OF /irm/t_gkonwu,
lt_konm TYPE /irm/t_gkonmu,
lc_konm TYPE LINE OF /irm/t_gkonmu,
lt_komg TYPE /irm/t_gkomg_index,
lc_komg TYPE LINE OF /irm/t_gkomg_index,
lt_user_data TYPE /irm/t_gpraxfu_index,
lc_user_data TYPE LINE OF /irm/t_gpraxfu_index.
DATA: lc_updt(1) TYPE c.
DATA: lc_knumh TYPE knumh.
DATA: BEGIN OF lc_str_knumh,
hd(2) TYPE c VALUE '$$',
inc_num(8) TYPE c,
END OF lc_str_knumh.
DATA: blank_agree_key TYPE knuma VALUE '~~~~~~~~~~'.
FIELD-SYMBOLS <konh_line> LIKE LINE OF lt_konh.
FIELD-SYMBOLS <konp_line> LIKE LINE OF lt_konp.
DATA: lc_rule TYPE type_key_rule.
READ TABLE pt_agreement INTO lc_rule INDEX 1.
SELECT SINGLE * FROM kona
WHERE vkorg = lc_rule-vkorg
AND vtweg = '10'
AND spart = '10'
AND boart = 'ZPS1'
AND botext = lc_rule-sap_agkey.
IF sy-subrc = 0.
lc_updt = 'U'.
ELSE.
lc_updt = 'I'.
ENDIF.
LOOP AT pt_agreement INTO lc_rule.
MOVE sy-tabix TO lc_str_knumh-inc_num.
CONDENSE lc_str_knumh-inc_num NO-GAPS.
WHILE lc_str_knumh-inc_num+7(1) = ' '.
CONCATENATE '0' lc_str_knumh-inc_num INTO lc_str_knumh-inc_num.
CONDENSE lc_str_knumh-inc_num NO-GAPS.
ENDWHILE.
CONCATENATE '$$' lc_knumh INTO lc_knumh.
MOVE lc_str_knumh TO lc_knumh.
MOVE c_strt_knumh TO lc_knumh.
CLEAR: lc_konh, lc_konp, lc_komg.
MOVE: lc_rule-vkorg TO lc_komg-komg-vkorg,
'10' TO lc_komg-komg-vtweg,
'10' TO lc_komg-komg-spart,
p_waers TO lc_komg-komg-waerk,
'1300' TO lc_komg-komg-bukrs,
lc_rule-lifnr TO lc_komg-komg-lifnr,
lc_knumh TO lc_komg-knumh,
lc_knumh TO lc_konh-knumh,
lc_knumh TO lc_konp-knumh,
lc_rule-datab TO lc_konh-datab,
lc_rule-datbi TO lc_konh-datbi.
CASE lc_rule-tablnam.
WHEN 'A701'. "Every Agreement will have a A701 rule -
"Therefore we acn setup the header using A701
MOVE: 'New ' TO lc_kona-knuma,
lc_rule-vkorg TO lc_kona-vkorg,
'10' TO lc_kona-vtweg,
'10' TO lc_kona-spart,
'ZPS1' TO lc_kona-boart,
'C' TO lc_kona-abtyp,
'V' TO lc_kona-kappl,
p_waers TO lc_kona-waers,
lc_rule-knuma_ag TO lc_kona-abrex,
'ZPS2' TO lc_kona-kobog,
lc_rule-datab TO lc_kona-datab,
lc_rule-datbi TO lc_kona-datbi,
lc_rule-sap_agkey TO lc_kona-botext,
'1300' TO lc_kona-bukrs,
'I' TO lc_kona-updkz.
MOVE: 'New ' TO lc_cbasp-knuma_ag,
'ZPS1' TO lc_cbasp-boart_ag,
p_waers TO lc_cbasp-waers,
'A' TO lc_cbasp-setl_mth,
'B' TO lc_cbasp-setl_typ,
'A2' TO lc_cbasp-ident,
'E' TO lc_cbasp-setlm,
'ZPDA' TO lc_cbasp-pargr,
'X' TO lc_cbasp-npric,
'LF' TO lc_cbasp-stprl,
lc_rule-lifnr TO lc_cbasp-stpar,
lc_rule-contract_rev TO lc_cbasp-rvnum,
'I' TO lc_cbasp-updkz.
CONCATENATE: blank_agree_key
lc_rule-lifnr INTO lc_konh-vakey.
MOVE: lc_rule-lifnr TO lc_konp-lifnr.
WHEN 'A703'.
CONCATENATE: blank_agree_key
lc_rule-kunnr INTO lc_konh-vakey.
MOVE lc_rule-kunnr TO lc_komg-komg-kunnr.
WHEN 'A709'.
CONCATENATE: blank_agree_key
lc_rule-zzprodh1 lc_rule-zzprodh2 lc_rule-zzprodh3
lc_rule-zzprodh4 lc_rule-zzprodh5 INTO lc_konh-vakey.
CONCATENATE: lc_rule-zzprodh1 lc_rule-zzprodh2 lc_rule-zzprodh3
lc_rule-zzprodh4 lc_rule-zzprodh5 INTO lc_komg-komg-prodh.
WHEN 'A710'.
CONCATENATE: blank_agree_key
lc_rule-matkl INTO lc_konh-vakey.
MOVE lc_rule-matkl TO lc_komg-komg-matkl.
WHEN 'A711'.
CONCATENATE: blank_agree_key
lc_rule-matnr INTO lc_konh-vakey.
MOVE lc_rule-matnr TO lc_komg-komg-matnr.
IF lc_rule-kschl = 'ZPPL'.
MOVE: 'C' TO lc_konp-krech,
'CAD' TO lc_konp-konwa.
lc_konp-kbetr = lc_rule-net_po_price * 1.
ENDIF.
WHEN 'A717'.
WHEN 'A718'.
CONCATENATE: blank_agree_key
lc_rule-zzextwg INTO lc_konh-vakey.
MOVE lc_rule-zzextwg TO lc_komg-komg-zzextwg.
WHEN 'A719'.
CONCATENATE: blank_agree_key
lc_rule-werks INTO lc_konh-vakey.
MOVE lc_rule-werks TO lc_komg-komg-werks.
WHEN 'A721'.
CONCATENATE: blank_agree_key
lc_rule-kunnr lc_rule-werks INTO lc_konh-vakey.
MOVE: lc_rule-kunnr TO lc_konp-kunnr,
lc_rule-kunnr TO lc_komg-komg-kunnr.
WHEN 'A722'.
CONCATENATE: blank_agree_key
lc_rule-vkbur INTO lc_konh-vakey.
MOVE lc_rule-vkbur TO lc_komg-komg-vkbur.
WHEN 'A724'.
CONCATENATE: blank_agree_key
lc_rule-kunnr lc_rule-vkbur INTO lc_konh-vakey.
MOVE: lc_rule-kunnr TO lc_konp-kunnr,
lc_rule-kunnr TO lc_komg-komg-kunnr,
lc_rule-vkbur TO lc_komg-komg-vkbur.
ENDCASE.
MOVE: 'A' TO lc_konh-kvewe,
lc_rule-tablnam+1(3) TO lc_konh-kotabnr,
lc_rule-kappl TO lc_konh-kappl,
lc_rule-kschl TO lc_konh-kschl.
REPLACE ALL OCCURRENCES OF '~' IN lc_konh-vakey WITH ' '.
APPEND lc_konh TO lt_konh.
CLEAR lc_konh.
*--- Add in the KONP.Do we need to add
MOVE: lc_rule-kappl TO lc_konp-kappl,
lc_rule-kschl TO lc_konp-kschl,
'G' TO lc_konp-krech.
IF lc_rule-kschl+3(1) = '%'.
MOVE: 'A' TO lc_konp-krech,
'%' TO lc_konp-konwa.
lc_konp-kbetr = lc_rule-rebate_perc * 1.
ENDIF.
APPEND lc_konp TO lt_konp. CLEAR lc_konp.
APPEND lc_komg TO lt_komg. CLEAR lc_komg.
ENDLOOP.
IF lc_updt = 'I'.
CALL FUNCTION '/IRM/IPCB_AGREEMENT_CREATE'
EXPORTING
I_MESSAGES_DISPLAY = ' '
I_SAVE_MESSAGES = ' '
I_COMMIT_WORK = 'X'
I_CALL_FROM_WS = ' '
is_kona = lc_kona
is_cbasp = lc_cbasp
it_cbapr = lt_cbapr
it_cbadt = lt_cbadt
it_cbafs = lt_cbafs
it_cbacn = lt_cbacn
it_cbacl = lt_cbacl
it_cbtpv = lt_cbtpv
it_texts = lt_texts
it_cbasd = lt_cbasd
IMPORTING
es_agreement = lc_agreement
e_log_number = lc_e_log_number
TABLES
t_messages = lt_messages
CHANGING
CT_VAKE = lt_vake
ct_konh = lt_konh
ct_konp = lt_konp
CT_KONW = lt_konw
CT_KONM = lt_konm
ct_komg = lt_komg
CT_USER_DATA = lt_usr_data
EXCEPTIONS
no_documents_to_process = 1
no_authorization = 2
creation_failed = 3
new_pricing_not_maitained = 4
OTHERS = 5.
IF sy-subrc <> 0.
Implement suitable error handling here
ELSE.
MOVE: lc_agreement-knuma_ag TO po_agreement,
lc_agreement-knuma_ag TO lc_kona-knuma.
ENDIF.
APPEND LINES OF lt_messages TO gt_messages.
ELSE.
MOVE-CORRESPONDING kona TO lc_kona.
ENDIF.
LOOP AT lt_konh ASSIGNING <konh_line>.
MOVE lc_kona-knuma TO <konh_line>-vakey+0(10).
move '&' to <konh_line>-knumh+0(1).
ENDLOOP.
LOOP AT lt_konp ASSIGNING <konp_line>.
MOVE lc_kona-knuma TO <konp_line>-vakey+0(10).
move '&' to <konh_line>-knumh+0(1).
ENDLOOP.
lc_kona-updkz = 'U'.
lc_cbasp-updkz = 'U'.
CLEAR lt_messages.
CALL FUNCTION '/IRM/IPCB_AGREEMENT_CHANGE'
EXPORTING
I_MESSAGES_DISPLAY = ' '
I_SAVE_MESSAGES = ' '
I_COMMIT_WORK = 'X'
I_INIT_DATA = 'X'
is_kona = lc_kona
is_cbasp = lc_cbasp
it_cbapr = lt_cbapr
it_cbadt = lt_cbadt
it_cbafs = lt_cbafs
it_cbacl = lt_cbacl
it_cbacn = lt_cbacn
IT_FIELDS =
it_texts = lt_texts
IMPORTING
e_log_number = lc_e_log_number
TABLES
t_messages = lt_messages
CHANGING
cs_agreement = lc_agreement
CT_VAKE = lt_vake
ct_konh = lt_konh
ct_konp = lt_konp
CT_KONW = lt_konw
CT_KONM = lt_konm
ct_komg = lt_komg
CT_USER_DATA = lt_usr_data
EXCEPTIONS
no_documents_to_process = 1
no_authorization = 2
change_failed = 3
agreement_locked = 4
OTHERS = 5.
IF sy-subrc <> 0.
Implement suitable error handling here
ENDIF.
APPEND LINES OF lt_messages TO gt_messages.
ENDFORM. " CREATE_AGREEMENT -
How to Use the Function Module 'BAPI_BUSPROCESSND_CHANGEMULTI'
Dear Experts,
Can anyone Explain me how to Use the Function Module 'BAPI_BUSPROCESSND_CHANGEMULTI'.My Requirement is i want to change the Partners of the Service Order.It is Very Urgent Requirement Please Help me.
Thanks & Regards,
Ashok.Hi,
For service order you can use FM 'BAPI_ACTIVITYCRM_CHANGEMULTI' as it is much easier to use.
Sample code is below. You can use that:
"fill the details of partner which is
"to be added as main partner or in place of Interaction Agent
wa_partner_new-ref_guid = w_guid_ref.
wa_partner_new-ref_handle = '0000000000'.
wa_partner_new-ref_kind = 'A'.
wa_partner_new-kind_of_entry = wa_partner-kind_of_entry.
wa_partner_new-ref_partner_handle = '0000'.
wa_partner_new-ref_partner_fct = 'Z_IA'.
"wa_partner-partner_no : New partner no.
wa_partner_new-ref_partner_no = wa_partner-partner_no.
wa_partner_new-ref_no_type = wa_partner-ref_no_type.
wa_partner_new-ref_display_type = wa_partner-ref_display_type.
wa_partner_new-display_type = 'BP'.
wa_partner_new-no_type = 'BP'.
wa_partner_new-partner_fct = 'Z_IA'.
"w_partner_no : Old partner no. which is to be changed
wa_partner_new-partner_no = w_partner_no.
wa_partner_new-mainpartner = 'X'.
INSERT wa_partner_new INTO TABLE it_partner_new.
wa_partner_newx-display_type = 'X'.
wa_partner_newx-no_type = 'X'.
wa_partner_newx-partner_fct = 'X'.
wa_partner_newx-partner_no = 'X'.
wa_partner_newx-mainpartner = 'X'.
INSERT wa_partner_newx INTO TABLE it_partner_newx.
IF it_partner_new[] IS NOT INITIAL AND it_partner_newx[] IS NOT INITIAL.
"maintain all changes to be done
CALL FUNCTION 'BAPI_ACTIVITYCRM_CHANGEMULTI'
TABLES
partner = it_partner_new
partnerx = it_partner_newx.
CLEAR : wa_guid1.
REFRESH : it_guid1.
wa_guid1-guid = w_guid_ref.
APPEND wa_guid1 TO it_guid1.
"save the changes
CALL FUNCTION 'BAPI_ACTIVITYCRM_SAVE'
TABLES
objects_to_save = it_guid1.
"commit the transaction
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDIF.
Reply fro any further help.
Please reward points if helpful.
Regards,
Ashlesha -
How to use the Function Module RH_READ_INFTY_1001...
Hi,
Can any one Tell me .. How to do the same functionality .. given below (select).
Using the Function Module RH_READ_INFTY_1001...
*reads CP (Central Person) based on BP (Business Partner)
Select single objid (Object ID)
from hrp1001
into gv_sobid
where subty eq 'B207'
and sclas eq 'BP'
and sobid eq is_header-partner.
*reads P (Person) Based on determined BP (Business Partner)
select single sobid (ID related Object)
from hrp1001
into gv_sobid
where subty eq 'B209'
and otype eq 'CP'
and objid eq gv_sobid.
*determines UserID from IT0105 for determined personell ID
select single usrid
from pa0105
into gv_usrid
where pernr eq gv_sobid
and subty eq '999'.
Reply ASAP....
Answers will be Rewarded...objects-plvar = l_plvar.
objects-otype = 'S '.
objects-sobid = l_positions-objid.
APPEND objects.
CLEAR i1001_itab. REFRESH i1001_itab.
CALL FUNCTION 'RH_READ_INFTY_1001'
EXPORTING
* AUTHORITY = 'DISP'
* WITH_STRU_AUTH = 'X'
istat = '1'
* EXTEND = 'X'
subty = 'A008'
begda = l_keyda
endda = l_keyda
* CONDITION = '00000'
* SORT = 'X'
* WITH_EV = ' '
* ADATA = 'X'
TABLES
i1001 = i1001_itab
objects = objects
EXCEPTIONS
nothing_found = 1
wrong_condition = 2
OTHERS = 3.
IF sy-subrc <> 0.
CLEAR i1001_itab. REFRESH i1001_itab.
CLEAR mngr_nr.
ELSE.
READ TABLE i1001_itab WITH KEY sclas = 'P'.
IF sy-subrc = 0.
mngr_nr = i1001_itab-sobid.
ELSE.
THis is the sample code to use function module using this function module you can get upto HRP1001 selection for userid you need to use same select you write for PA0105 -
How to use the function module CONVERSION_FACTOR_GET?
Hi Experts,
I have to use convert the value of a field from units 'HL' to 'HHL'. According to me, we can use the function module CONVERSION_FACTOR_GET. However, i am not able to know how to use it?
Can anyone explain how to use the FM, i mean what should be the importing and exporting parameter.... For recap, i need to convert HL to HHL, for example 3 HL to 0.03 HHL.
Please help.
Rewards for sure!
Thanks in advance.
AkshHi
If it is Unit Conversion better use the following Fun modules
UNIT_CONVERSION_SIMPLE
MD_CONVERT_MATERIAL_UNIT
goto SE37 first and execute them by entering some value and then use it in the code after confirming it
Regards
Anji -
Regarding how to use the function module *control_form* in scripts
HI friends,
Can any one tell why and where do we use the function module control_form in scripts. Can you give me a small scenario how to use in scripts.hi satish,
by using this function module we can pass the control
commands to FORM THROUGH ABAP/4 PROGRAM.
see the following example:
TABLES: kna1.
DATA: BEGIN OF it_kna1 OCCURS 0,
kunnr LIKE kna1-kunnr,
name1 LIKE kna1-name1,
ort01 LIKE kna1-ort01,
land1 LIKE kna1-land1,
END OF it_kna1.
DATA:records TYPE i,
window TYPE i value 1.
select-options:s_kunnr for kna1-kunnr.
SELECT kunnr name1 ort01 land1 FROM kna1 INTO TABLE it_kna1
where kunnr in s_kunnr.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
form = 'ZSCRIPT4'
language = sy-langu.
LOOP AT it_kna1.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ELE1'
function = 'SET'
type = 'BODY'
window = 'MAIN'.
DESCRIBE TABLE it_kna1 LINES records.
IF window lt records.
window = window + 1.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'NEW-WINDOW'
EXCEPTIONS
UNOPENED = 1
UNSTARTED = 2
OTHERS = 3
ENDIF.
ENDLOOP.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT =
RDI_RESULT =
TABLES
OTFDATA =
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SEND_ERROR = 3
SPOOL_ERROR = 4
CODEPAGE = 5
OTHERS = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
thanks,
raji -
How to use the function module ADDRESS_INTO_PRINTFORM?
Hi there,
i need to use the function module ADDRESS_INTO_PRINTFORM. While doing so, I found out that the output parameter ADDRESS_PRINTFORM_TABLE has the District after the City, which is not at all acceptable. I am using the following import parameters only.
ADDRESS_TYPE
ADDRESS_NUMBER
SENDER_COUNTRY
NUMBER_OF_LINES
IV_NATION
Kindly help me to find out what's missing to have the district before the city in the output.Hi
I think, It is because of wrong data maintained in ADRC table.
Check ADRC table. CITY2 is district and CITY1 is city.
In the output of ADDRESS, CITY2(District) has to come first. -
How to use the Function module 'BAPI_APPRAISAL_GETDETAIL'
hello friends,
I have to create the report which displays appraisee name, appraiser name,reviewer name and result.Using BAPI_APPRAISAL_GETDETAIL we can get the above all.But i don't know how to use the above function module.If anyone have used in their program could you please send me or anyone have idea how to do that Please help.It is very Urgent Help me.
Thanks in advance,
Regards,
Ashok.Hi,
I do not hae the code but i can tell you how you use the FM and get the required data, please follow the below mentioned steps:
1) In this Bapi you need to pass the Plan verison and Object Id data in the BAPI Import parameters and while passing the these values need to decalra the data variables same (of use the same reference fields as they are in Bapi import fields)as they are Bapi importing data fields.
2) decalre the Internal Table structure as they are in the Export and Table parameters.
3) Assign the decalred Import and Tables structures to the BAPI FM.
4) once the Bapi is run with the Import parameters data the Apprisal data and Apprisee data will returened in the import and table structures and also return value wll be imported.
5) now using the Structures which are in Import and Table decalrations in the FM you can retrieve the data by reading them.
Do let me know if you need any more details in this regard.
Raghotham Reddy.
If you find this is the right solution then allocate reward point. -
How to use the function module which i mentioned, to store the pdf files
hi,
SO_NEW_DOCUMENT_ATT_SEND_API1
I am using above function module to send employ details through mail in pdf format, if i want to store that pdf files in a local computer too, then how should i catch hold off those individual pdf files of all employees, plz help me out with a sample codehey iam from functional side can u be little bit clear of that feature
thanks
sikindar -
How to use the Function Module WWW_GET_SELSCREEN
Dear Friends,
We got a requirement wherein we need to publish the bw reports on Web. For this we need to pass the query into a Function Module. We found the FM "WWW_GET_SELSCREEN". Is this the correct FM to execute the query and publish on web? If so , how to use this FM i.e. what all parameters do we need to pass to this FM. We are using BW 3.5 Version. Please revert back ASAP.
Regards,
Chandra.Hi,
check out this weblog.
Pass Parameter to ITS URL Upadated 21st June 2008
http://sap182.xxxxxxxxxxxxx.com:8056/sap/bc/bsp/sap/rfc/default.htm?sap-client=018&function=WWW_GET_EMPLOYEE_INFORMATION&_param1=56785
Thanks,
Ajay. -
How to use the Function module /SAPAPO/CIF_ORDER_INBOUND
Hi Gurus,
I need to tick planned order conversion (CNVIN) indicator in APO planned order to convert it into manufacturing order through some program. I found one function module /SAPAPO/CIF_ORDER_INBOUND to do so. But i don't know how to use it. Can you please tell me what are the input i should maintain in this FM?
Regards
Rajib PathakHi Rajib
/SAPAPO/CIF_ORDER_INBOUND is the FM called by the queued RFC process known as the CIF. If you use this FM then you will trigger potential errors in the CIF queue and application log. I do not recommend you use this FM except to see what the code does.
You can use /SAPAPO/RRP_ORDER_SET_CNVIN passing only ordid, set_cnvin = X, dialog = space and merge_not_allowed = space - be sure to create simsession using /SAPAPO/RRP_SIMSESSION_CREATE or retrieve it using /SAPAPO/RRP_SIMSESSION_GET. If you want immediate OLTP transfer then set old_olpttransfer to 0 - see values in domain /SAPAPO/OM_OLTPTRANSFER.
There is a standard program to convert orders /SAPAPO/RRP_ORDER_CONVERSION. You may be able to use this instead of reinventing it? Or at least see what's happening under the covers.
Andy -
How to use the Function module CSAI_BOM_MAINTAIN
Hi Friends,
I want to use the FM CSAI_BOM_MAINTAIN to upload sub-items for a BOM. I also wanna make sure that the sub-items created/deleted for any line item, using this FM, must happen under the change number which i provide on the screen.
Pls help me with any test program or a code which u might have.
Thanks in advance..
Hozefa.Hi Hozefa,
This sample code is to add new items to a Equipment BOM that already exits.
REPORT z_csai_bom_maintain.
DATA: gs_csin TYPE csin,
gs_stko TYPE stkob,
gs_stzu TYPE stzub.
DATA: gt_stpo TYPE TABLE OF stpob,
gt_stko TYPE TABLE OF stkob,
gs_stpo TYPE stpob.
CONSTANTS: c_x TYPE char01 VALUE 'X'.
PARAMETERS: pa_equnr TYPE equnr OBLIGATORY.
START-OF-SELECTION.
gs_csin-stlty = 'E'.
gs_csin-stlan = '4'.
gs_csin-werks = 'C002'.
gs_csin-equnr = pa_equnr.
CALL FUNCTION 'CSAI_BOM_READ'
EXPORTING
ecsin = gs_csin
* IMPORTING
* FL_WARNING =
TABLES
t_stpob = gt_stpo
t_stkob = gt_stko
* T_DEP_DATA =
* T_DEP_DESCR =
* T_DEP_ORDER =
* T_DEP_SOURCE =
* T_DEP_DOC =
* EXCEPTIONS
* ERROR = 1
* OTHERS = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE gt_stko INTO gs_stko INDEX 1.
gs_csin-trtyp = 'B'. "Update
gs_csin-stlnr = gs_stko-stlnr.
gs_csin-aennr = gs_stko-aennr.
gs_csin-datuv = gs_stko-datuv.
****New Item.
gs_stpo-stlty = 'M'.
gs_stpo-postp = 'L'.
gs_stpo-idnrk = '000000000040003006'.
gs_stpo-menge = 7.
gs_stpo-meins = 'ST'.
gs_stpo-rvrel = c_x.
APPEND gs_stpo TO gt_stpo.
CALL FUNCTION 'CSAI_BOM_MAINTAIN'
EXPORTING
* FL_BOM_CREATE = ' '
* fl_new_item = c_x
* fl_complete = c_x
ecsin = gs_csin
estkob = gs_stko
estzub = gs_stzu
* FL_NO_CHANGE_DOC = ' '
* FL_COMMIT_AND_WAIT = ' '
* FL_NO_COMMIT_WORK = ' '
* FL_ALE = ' '
* FL_DEFAULT_VALUES = 'X'
* FL_NEW_ROMEN = 'X'
* FL_RECURSIVE = ' '
* FL_IMPLICIT_SUBITEM_DELETION =
* IMPORTING
* FL_WARNING =
* ASTKOB =
* ASTZUB =
TABLES
t_stpob = gt_stpo
et_stpob = gt_stpo
* T_STPUB =
* T_LTX_ITM =
* T_LTX_BOM =
* EXCEPTIONS
* ERROR = 1
* OTHERS = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Best Regards,
Sergio Calvo. -
How to use the Function module BDM_DISPUTE_NOTES_GET
i have to use the FM BDM_DISPUTE_NOTES_GET to ET_NOTES
CALL FUNCTION 'BDM_DISPUTE_NOTES_GET'
EXPORTING
im_guid =
IMPORTING
ES_RETURN =
ET_NOTES = V_STRING.
V_STRING type ???????(i want this)
my output will be a paragraph of 4 lines.
what should be the data type of the V_STRING, i am getting type conflict errorHi,
Please try this.
DATA: V_STRING TYPE TABLE OF BDM_NOTES.
Regards,
Ferry Lianto -
How to find Job relationship using the Function Module RH_STRUC_GET
Hi Experts,
I am getting O-S-P relation ship using for an org unit using the function module RH_STRUC_GET.
Further If I want the job relation ship, how it can be found out.
Thanks in Advance,
IrfanHello Irfan,
Have a look at the table T778A for evaluation path you require and pass this to the function module.
Regards,
Manoj.
Maybe you are looking for
-
Exit or Badi to prevent MIGO Goods Receipt on PO with Inbound Delivery
Hi, I am hoping that someone can provide me with some direction on how to prevent the use of MIGO for GR when the PO being received is (or should be) linked to an inbound delivery. For purchase orders with a confirmation control key an inbound delive
-
FAGLL03 doesn't display functional areas
Dear All, Whenever we run the FAGLL03- Display GL line item report, it's not displaying the functional area value for some line items (for some it displays), even though the original posted document shows the functional area value. I would appreciate
-
To retrieve data from xml datatype
oracle.sql.OPAQUE@4e1a77 This is the XML data that is stored in the field of oracle XML dataype .So from this oracle.sql.OPAQUE@4e1a77 ..how can i retrieve the actual data
-
After installing RHEL4. I have created oracle user accounts and set the permissions..now while trying to login as oracle the system gives a error message in the session errors..its showing out of diskspace or installation problem
-
Purchasing music using $100 credit from iphone
is there any way i can purchase music or ringtones using my $100 rebate/credit i got back from my iphone, i do have the code and pin #, please let me know?