How to use the remote control in MediaSource Audio Play

Hello,
I bought myself the Creative X-Fi Elite Pro.
I found out that I only can use the remote control in Media Center of the software.
Now I want to use it in the Creative Audio Player whicht was also in the Box.
Is there a way?

Yes there is. I suggest trolling these boards for the 3rd party remote solutions that will free you to use the remote in ANY application like Winamp, Notepad, Windows Media Player, etc.
Just my two opinionated cents...

Similar Messages

  • How do u turn down the tick volume when using the remote control?

    how do u stop the ticking(clicking) when adjusting the volume using the remote control?

    Hi philippalldino,
    I understand that you do not wish to hear your volume feedback when adjusting the volume of your computer. Here is an article that will tell you how to disable this feature:
    OS X Mountain Lion: Turn off the alert sound for volume keys
    http://support.apple.com/kb/PH10762
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • Using the remote control.

    I noticed that the Apple knowledge based article describing the functions of the remote hasn't been updated to reflect the v 3 Apple tv software. I suspect there are a few users who don't get to use all the features of the Apple tv because they aren't necessarily aware of all the things the remote will do.
    In an effort to try to ensure that users get the best out of their Apple TV's I have now produced my own list of functions that are accessible using the remote control. In doing this I realised it involved a little more work than I'd envisaged since the remote performs many functions which can vary depending on which type of content you are using.
    I'd be grateful if those of you that are familiar with the Apple tv would take a critical look at what I have done and provide me with feedback on any inaccuracies, omissions or improvements that could be made in relation to the information I have provided.
    Using the Apple TV remote control
    Message was edited by: Winston Churchill: Having seen the site for the first time I realise I need to do some work on the formatting-I'll put this right in due course, just looking for comments on content for now.

    Alley_Cat wrote:
    1 - Looks exhaustive!
    It was actually, I didn't think I'd need to do quite so much checking that things did what it says.
    2 - Having result on the left initially confused me, I think I'd find Action>Result better than Result < Action.</div>
    I see the point, but it could possibly be resolved by renaming 'result' as aim, goal or something similar rather than reversing the body text itself. I was trying to emulate the way Apple themselves did this on their KB (Reason I did this - their KB is out of date)
    3 - Probably a bit too much information on one page.
    Perhaps split into a tabbed layout
    Remote | Basic Controls | Music | TV Shows | Films/Movies etc.
    Noted, I'm still not happy with the formatting, it needs work, it might not work too well in some browsers, a tabbed page is a little more than my iweb capabilities at present (or at least the way I would want it to work - tabs within a page rather than tabs to change pages)
    Jolly Giant wrote:
    maybe a slightly larger font ...
    Mmmm, not sure about that, I'm always concerned my text is already too large (necessity of white on black), might it not simply make an already long page a bit longer.

  • How to use the custom control ?

    Hi Friends,
    plz help to use of  custom control in screen painter ?
    and how to use the custom control ?
    Thanking you.
    Regards,
    Subash.

    HI,
    Screen Elements
    A screen can contain a wide variety of elements, either for displaying field contents, or for allowing the user to interact with the program (for example, filling out input fields or choosing pushbutton functions). You use the Screen Painter to arrange elements on the screen.
    You can use the following elements:
    ·        Text fields
    Display elements, which cannot be changed either by the user or by the ABAP program.
    ·        Input/output fields and templates
    Used to display data from the ABAP program or for entering data on the screen. Linked to screen fields.
    ·        Dropdown list boxes
    Special input/output fields that allow users to choose one entry from a fixed list of possible entries.
    ·        Checkbox elements
    Special input/output fields that the user can either select (value ‘X’) or deselect (value SPACE). Checkbox elements can be linked with function codes.
    ·        Radio button elements
    Special input/output fields that are combined into groups. Within a radio button group, only a single button can be selected at any one time. When the user selects one button, all of the others are automatically deselected. Radio button elements can be linked with function codes.
    ·        Pushbuttons
    Elements on the screen that trigger the PAI event of the screen flow logic when chosen by the user. There is a function code attached to each pushbutton, which is passed to the ABAP program when it is chosen.
    ·        Frame
    Pure display elements that group together elements on the screen, such as radio button groups.
    ·        Subscreens
    Area on the screen in which you can place another screen.
    ·        Table controls
    Tabular input/output fields.
    ·        Tabstrip controls
    Areas on the screen in which you can switch between various pages.
    ·        Custom Controls
    Areas on the screen in which you can display controls. Controls are software components of the presentation server.
    ·        Status icons
    Display elements, indicating the status of the application program.
    ·        OK field
    Every screen has a twenty-character OK_CODE field (also known as the function code field) that is not displayed directly on the screen. User actions that trigger the PAI event also place the corresponding function code into this field, from where it is passed to the ABAP program. You can also use the command field in the standard toolbar to enter the OK field. To be able to use the OK field, you need to assign a name to it.
    All screen elements have a set of attributes, some of which are set automatically, others of which have to be specified in the Screen Painter. They determine things such as the layout of the screen elements on the screen. You can set the attributes of screen elements in the Screen Painter - either for a single element, or using the element list, which lists all of the elements belonging to the current screen. Some of the attributes that you set statically in the Screen Painter can be overwritten dynamically in the ABAP program.
    with regards,
    sowjanyagosala

  • Just bought Apple TV today, have one problem, how to have the remote control the TV alone, not my mac pro ...

    just bought the Apple TV today, connected with my Pioneer Elite receiver, works great with my iPhone 5, HD movie steam without any problem. but when i open my MBP, problem start surface, i try to do the home sharing, but the remote control not only control my apple tv, but control my MBP as well, so it mess up everything. please help also the Apple TV keep on resume playing music or video without permission, for example, i was trying to watch a photo slideshow, but it keeping switch back to playing the video files i last watched. any ideas?

    As for the remote issue, what version of OS X are you using?
    With the latest version of Mountain Lion 10.8.2 you will find the remote control setting in Preferences/Sharing/Privacy then click the Advanced button at the bottom. Check "Disable remote control infrared receiver" or pair a different Apple remote to prevent the ATV's remote from controlling the computer.

  • I am trying to get a speaker dock that will play my nano 6 generation by using the remote control. So far I have not found one where the remote works. Does anyone know if they are made?  peterorpington

    I am trying to get a speaker dock that will play my 6thgen ipod by using the remote.So far I have not found one . Does anyone know if there is one that is made for the 6th gen?

    Sheesh. That looks hard. I think it will fall over at this point:
    "Connect to my Exchange mailbox using HTTP" 'cos Thunderbird uses only the regular email protocols: POP, IMAP and SMTP.
    Here (at work) we have in the past have had IMAP and SMTP enabled on our Exchange server so Thunderbird could then connect just like to any other regular internet-based service.
    With the change here to outlook365/outlook 2010 I've had to switch to using DavMail which lets Thunderbird talk to the mail server using OWA.
    I haven't (seriously) tried Exquilla. Whilst I have great respect for its author and some of his other add-ons, I saw no reason to use an add-on that required payment when DavMail works for free.

  • How to use the BreadCrumb control

    Hi everyone,
    I'm trying to understand the use of BreadCrumb in NWs.
    I'd like to show the name of the current showed view in the step of BreadCrumb; I have 3 linked views in this sequence: 1 -2 -3; I select the view n.1, than view n.2 and finally the view n.3; the BreadCrumb  should show this result: view1 -> view2 -> view3.
    In addiction to this, the order of showed view could be changed at runtime! How can I do in this case?
    What should I use: MultipleBreadCrumbStep or "simple"Step?
    I saw that there isn't info enough in the SDN forum!
    Can you explain the right use of BreadCrumb to have the above result?
    Thanks
    Enrico

    To explain my problem in a complete manner, I write to you the other thread I have opened...
    ok!
    The situation is this:
    I used the componentization to create and manage several slave DCs and one root (master) DC.
    The root DC handles the view visibility of each slave DC, simply using a navigation ammong the interface views.
    I'd like to write down the name of current interface view (showed by the root DC) at runtime so that I could put these names in a BreadCrumb control (developed using Developer Studio).
    I also saw that a BreadCrumb utility exists in the Enterprise Portal.... but I think that control only works using one application url (of the root DC) and doesn't take trace of events inside each slave view!
    Is it correct? If yes, I couldn't use the BreadCrumb provided by the portal!
    I have to crate the communication between root DC and another DC which I will title to "BreadCrumb DC".
    The BreadCrumb DC would detect the navigation inside the root and show it in steps;
    the root DC would trace the navigation (of all interface slave views) and write down it into a context;
    this context could be exposed by interface controller of the root DC and sent to BreadCrumb DC.
    Well.... how can realize this project?
    I'm thinking about it but I can't solve the dilemma!
    May you help me?
    Thanks in advance,
    Enrico

  • I don't know how to USE my remote control on my AUDIGY 2 ZS Platinum

    I followed the instructions on this page: http://support.creative.com/kb/showa....aspx?sid=2965
    about activating my remote control for my AUDIGY 2 ZS Platinum but mediasource did not have a remote control option tab as you can see here...
    Untitled.jpg
    I just changed the battery on my remote and the receiver blinks when I press a button on the remote but nothing happen no volume change or nothing.
    Don't know what else I should do.

    You can import the contacts from SIM.
    It is covered in the manual:
    iPhone User Guide (For iOS 4.2 and 4.3 Software)

  • I don't understand how to use the volume control on the new iphone headphones

    I just bought the new style earphones for my iphone and it has a new volume control -- how does it work?  On the old one you just pushed up or down for volume control but now it just increases volume for the time you hold it down?  Does anyone know how to use this properly?

    I have had good success with the System Font Panel. Now all of a sudden, I only get part of it. Any suggestions on how to restore the entire panel? There are no change size options in the corners like in some dialog boxes. I was going to paste what I have here, but for some reason, paste is not available.

  • How to use the treeview control

    I tried to use the treeview in the form builder.
    But I failed.
    If anyone can give me the guideline or related data,
    I'll be grateful.
    Thanks.

    Hi,
    Based on your description, my understanding is that you want to use treeview control in InfoPath 2013.
    Per my knowledge, There is no treeview control in Infopath 2013. Have you used the solution from third party? if it is , I suggest that you seek the third party for help. 
    Besides, here is a similar post, you can take a look at:
    http://www.infopathdev.com/forums/p/8978/80652.aspx
    Best Regards,
    Lisa Chen
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Lisa Chen
    TechNet Community Support

  • How to use the video control buttons on YouTube with voice over

    I have a Macbook Pro and since I am totally blind I use the voice over. I am watching YouTube videos but I can't access the buttons at the bottom of the screen. I can't play/pause the videos or use the slider. I ca't use any of those buttons. Is there sometihng I am missing here?

    I dont know if you will be able to connect other device like PS3 or Wii.
    As far as I know only the Xbox 360 could be connected to a Qosmio and could be used with the Windows MCE.
    I presume this is possible due to connection of Microsoft products; MCE and Xbox360
    To be honest; why you dont take a look into the user manual if this notebook is new to you?
    All details are mentioned in the user manual which is already preinstalled on the notebook.

  • How to use the NI controls in DialogBar?

    I made an dialogbar in mainframe and added some NI Controls and normal controls.
    But I did not receive the event message such as mouse click of NI button control.
    Please see attached file of my sample program. 
    Attachments:
    exDialogBar.zip ‏53 KB

    Hi teleppo,
    I noticed the same thing when I ran your code... I am investigating this further and will let you know when I find something out.
    Jervin Justin
    NI TestStand Product Manager

  • How to use the PTDatePicker control

    This was a solution I wanted to post to old question referenced in DEV2DEV forums, thought I would post it here for now:
    Running WCI 6.1 MP1
    PTDatePicker parameters:
    PTDatepicker = function(divName, varName, formName, textBoxName, buttonName, defaultValue, dateFormat, startDOW, strBtnImgPath, noValidation, displayTop, textBoxSize, displayLeft, onChangeHandler, minYearChoice, maxYearChoice, locale)
    ASPX code below:
    <html>
    <head>
    <span xmlns:pt='http://www.plumtree.com/xmlschemas/ptui/'>
    <pt:namespace pt:token="$$TOKEN$$" xmlns:xmlns:pt='http://www.plumtree.com/xmlschemas/ptui/' />
    <pt:ptui.include pt:name="jsdatepicker" pt:locale="en_US" />
    </head>
        <body>
        <div id="datepicker_div" class="cal-Div"> </div>
        <form name ="frmDetail" id="frmDetail" runat="server">
             <table>
                 <tr>
                     <td>
                         <b>Start Date:</b>
                     </td>
                     <td>
                         <script language="javascript">
                              var startDate_js = new PTDatepicker("datepicker_div","startDate_js","frmDetail_$$TOKEN$$","in_startdate","btn_startdate","","MM/dd/yyyy",0,"<pt:url pt:href='pt://images/plumtree/common/private/js/jsdatepicker/LATEST/images/'/>","","","","","","","","en_us");
                         </script>
                         <nobr>
                         <script language="javascript">
                             startDate_js.writeControl();
                         </script>   
                     </td>
                 </tr>
                 <tr>
                     <td>
                         <b>End Date:</b>
                     </td>
                     <td>
                         <script language="javascript">
                              var endDate_js = new PTDatepicker("datepicker_div","endDate_js","frmDetail_$$TOKEN$$","in_enddate","btn_enddate","","MM/dd/yyyy",0,"<pt:url pt:href='pt://images/plumtree/common/private/js/jsdatepicker/LATEST/images/'/>","","","","","","","","en_us");
                         </script>
                         <nobr>
                         <script language="javascript">
                             endDate_js.writeControl();
                         </script>
                     </td>
                 </tr>
             </table>
        </form>
        </body>
    </html>

    This was a solution I wanted to post to old question referenced in DEV2DEV forums, thought I would post it here for now:
    Running WCI 6.1 MP1
    PTDatePicker parameters:
    PTDatepicker = function(divName, varName, formName, textBoxName, buttonName, defaultValue, dateFormat, startDOW, strBtnImgPath, noValidation, displayTop, textBoxSize, displayLeft, onChangeHandler, minYearChoice, maxYearChoice, locale)
    ASPX code below:
    <html>
    <head>
    <span xmlns:pt='http://www.plumtree.com/xmlschemas/ptui/'>
    <pt:namespace pt:token="$$TOKEN$$" xmlns:xmlns:pt='http://www.plumtree.com/xmlschemas/ptui/' />
    <pt:ptui.include pt:name="jsdatepicker" pt:locale="en_US" />
    </head>
        <body>
        <div id="datepicker_div" class="cal-Div"> </div>
        <form name ="frmDetail" id="frmDetail" runat="server">
             <table>
                 <tr>
                     <td>
                         <b>Start Date:</b>
                     </td>
                     <td>
                         <script language="javascript">
                              var startDate_js = new PTDatepicker("datepicker_div","startDate_js","frmDetail_$$TOKEN$$","in_startdate","btn_startdate","","MM/dd/yyyy",0,"<pt:url pt:href='pt://images/plumtree/common/private/js/jsdatepicker/LATEST/images/'/>","","","","","","","","en_us");
                         </script>
                         <nobr>
                         <script language="javascript">
                             startDate_js.writeControl();
                         </script>   
                     </td>
                 </tr>
                 <tr>
                     <td>
                         <b>End Date:</b>
                     </td>
                     <td>
                         <script language="javascript">
                              var endDate_js = new PTDatepicker("datepicker_div","endDate_js","frmDetail_$$TOKEN$$","in_enddate","btn_enddate","","MM/dd/yyyy",0,"<pt:url pt:href='pt://images/plumtree/common/private/js/jsdatepicker/LATEST/images/'/>","","","","","","","","en_us");
                         </script>
                         <nobr>
                         <script language="javascript">
                             endDate_js.writeControl();
                         </script>
                     </td>
                 </tr>
             </table>
        </form>
        </body>
    </html>

  • Help-incomplete library shows up when I use the remote to play iTunes

    I bought a new iMac a few months ago and have enjoyed the luxury of being able to control the music in iTunes via the remote control from across the room. This morning, however, when I tried to do this, I found that only a small portion of the music that is in my library is available to me when I try to play the music using the remote control option. Has anyone else encountered this, and if so, how do I get around it? I've gone back into iTunes using the keyboard and confirmed that the library is still intact, and I've restarted the computer. That's pretty much what I know to do, so now I'm asking for outside input.
    The version of iTunes that I'm running is 7.0.1 (7). The only thing I've done recently involving iTunes is that I moved some of my music into a new ipod, but I don't think that would do this.
    Any input would be much appreciated.
    Thanks.
    -Andy

    Nobody else has experienced this problem?

  • How do I Audit Remote Control?

    A requirement of us implementing SCCM Remote Control, is that were able to report on what/when technicians are connecting to client systems. Upon investigating the canned reports in SCCM, I've found 3 reports that do some of this, specifically
    the 3 under "Status Messages - Audit";
    - All audit messages for a specific user
    - Remote Control - All computers remote controlled by a specific user
    - Remote Control - All remote control information
    1) Is there any more reports that may be useful? If so please specify.
    2) These reports also seem to be missing some information about connections that I made during testing. How does this auditing/report process work? and how would I troubleshoot whether the auditing was working correctly?
    3) Is it possible to audit/report on connections made from the standalone Remote Control Viewer tool?
    Thanks,
    Bill

    I've used those those reports and haven't noticed missing information. I don't keep track of every session...
    Perhaps were you using the remote control viewer utility directly instead of using the Admin console?
    As for question 3, it is normal. If you launch the remote viewer executable directly (not from the admin console), those sessions are not auditable. There are many threads about this... here's one:
    https://social.technet.microsoft.com/Forums/en-US/10aadbda-6a9c-4ee8-bcd8-a289d3a08385/methods-to-start-remote-control-other-than-sccm-console?forum=configmanagergeneral

Maybe you are looking for


HashFlare