How to use the same BSA with more than an operating unit ?

we have three operating units, sometimes a sales agreement is released from the three operating units, is there a way i can use the same sales agreemnet with the three operating units?

We had the same issue recently.
Users wanted same locator in the same org under different subinventories.
We suggested 2 solutions
1) Make the 1st locator segment=subinventory name (e.g. East.A.3.10, West.A.3.10)
2) Add a character to the first locator (e.g. EA.3.10, WA.3.10)
They picked up the 2nd option.
Hope this helps
Sandeep Gandhi
Omkar Technologies Inc.
Independent Techno-functional Consultant
513-325-9026

Similar Messages

MDT Console with more then 15 machines, How to use the same drivers for more machines.

Hello,
I'm am looking for a solution to make our MDT design as effective as possible(as small as posible).
The Situation:
The company has more then 15 different computers added to the MDT console for the automated installation of Windows 7. The installations are done in 2 different ways, 1 with a local USB key installation (with the deployment folder on the USB key) and the other
installation is a network USB key installation (with the deployment folder on the server).
The local USB key exists for offices in parts of the world where the internet connection is poor.
The problem:
We have machines which can use the same driver for different kinds of hardware functions (LAN, WLAN, etc..)
If we add a new machine to the MDT and we don't check the box for "Import drivers even if they are duplicates of an existing driver" we will automatic use the driver which already exists in the deployment folder. If say half a year
later we stop using an older machine which "may" have drivers that are being used for other machines and we delete the machine from MDT we should
NOT check the box "Completely delete these items, even if there are copies in other folders". The problem is that this can also lead to a lot of unused drivers in the deployment folder also because we do not know exactly how many
computers are using a certain driver.
At the moment we have another deployment share with for each machine its own drivers installed (so some drivers will be multiple times in the deployment folder) as you can guess this becomes really big.(deployment folder of more then 24 GB). The advantage
of this is that we can delete a machine from the MDT list without having to worry if the drivers for that machine might be used by other machines. It is now just becoming to big in size(GB).
The Question:
Is there not an option within MDT that checks automatically if the drivers connected to a certain machine in MDT are being used by other machines? In this case we would check the box "Completely delete these items, even if there are copies in other folders"
and MDT would not delete the drivers which are still used for the installations of other computers.
Thanks in advance.
Greets,
Arie

Arie,
I think you are over-complicating this. Basically using drivers that already exist is the way to go. Otherwise drivers will be imported a second, third or fourth time. Which also takes up allot of disk space. If you're concerned about driver management,
then I would suggest to drop your concerns, since there is nothing to less you can do about this particular issue. As long as you don't delete the driver that's been imported earlier by another machine there is nothing to worry.
Ask yourself:
- how long am I going to support model x
- how many times do I want to update drivers
With selection profiles you can easily target which content needs to go where (on your USB drive of-course)
I can imagine that managing 25 shares for 25 different models, just because you 'refuse' to have old drivers in your share, or have removed support for some hardware models, isn't really time and energy efficient too.
If you take a look in your deploymentshare\control folders you will see some XML files. These XML files hold all the entries in your deploymentshare. So your drivers.xml and drivergroups.xml (depending on the number of groups you have) are going to be very
big XML files. These XML files are read by MDT to identify the objects in MDT and under which folder the objects are located.
It's not possible to create or have an dependency between driver files and hardware models, other then creating groups under "Out-of-box Drivers" and using selection profiles.
Another suggestion would be to decrease your number of hardware models drastically. On the other hand, having 25 Gb of offline media isn't really a big deal either. Portable and removable media of those sizes (32 and 64 Gb) isn't that expensive as it used
to be 5 years ago.
Don't get me wrong, I perfectly understand your desire to manage this, but MDT doesn't provide any other way, then the things I have pointed out to you here.
Good luck! :)
If this post is helpful please click "Mark for answer", thanks! Kind regards

Trying to use the same ground for more than two channels (RSE configuration) with usb 6000

Hello,
I'm currently trying to set up a LabView code in order to get readings of voltage using 5 different locations simultaneously. I want to only use the first location as ground and obtain 4 voltage measurements between the ground and each one of the other 4 channels. I'm using a usb 6000 which for now allows me to use the same ground for only two channels. Is there a way to use the same ground for 4 channels?
Thank you,
Maria

You're right it is confusing the way I describe it so I ahve attached some pictures of the set up. The first figure is the cell filled with soil and the 5 probes inserted in it. The anode is placed at the left end of the cell and the cathode at the right end but they do not appear in the figure. I'm trying to use location 1 as gournd and take measurements of voltage from the following pairs: 1-2, 1-3, 1-4, and 1-5. The second figure is the DAQ I'm using. When I was trying to set up the RSE configuration, it was ussing ground A for the channels 6 & 7 (locations 2 and 3 in figure 1) but ground B for channels 4 & 5 (locations 4 and 5 in figure 1). What I am asking is which is the best way to use the signal from location 1 as the ground for all 4 channels. Is this more clear?
Thank you for your time!
Maria

How to use the stock locators for more than one subinventory

Hi,
We are working in Oracle Applications 11i.
We have 4 different inventory organizations. Each with one main subinventory. One of those inventory organizations MWN has a subinventory defined with stock locators. The other three have their subinventories not defined with stock locators.
Now, correct me if I'm wrong please, I cannot define a stock locator for an existing subinventory while there are onhand items in that subinventory.
So, We will define new subinventory(for each inv org) with stock locators and then do a subinventory transfer to the new relevant new subinventory organization.
The next point is: the user requests to use the same stock locators for the 4 inventory organizations. is this possible?
thank you...

We had the same issue recently.
Users wanted same locator in the same org under different subinventories.
We suggested 2 solutions
1) Make the 1st locator segment=subinventory name (e.g. East.A.3.10, West.A.3.10)
2) Add a character to the first locator (e.g. EA.3.10, WA.3.10)
They picked up the 2nd option.
Hope this helps
Sandeep Gandhi
Omkar Technologies Inc.
Independent Techno-functional Consultant
513-325-9026

How do i fix all the things that say "The song "Song name here" because the original file can not be found." It does the same thing with more than half of my apps and WAY more than half of my songs. Please help me.

Just tell me how to fix it. PLease

Hey xxCreepyFiaxx,
First, I would try the following suggested steps for when you don't see content in iTunes after updating:
Quit iTunes.
Download and install the latest version of iTunes.
Use the Finder (Mac) or Windows Explorer (Windows) to go to the iTunes folder that contains the iTunes library files:
Mac OS X
/Users/username/Music/iTunes/
Microsoft Windows Windows XP and Windows 2000
\Documents and Settings\username\My Documents\My Music\iTunes\
Microsoft Windows Windows Vista and Windows 7
\Users\username\Music\iTunes\
Drag the iTunes Library file from the above location to the Desktop.
Open the Previous iTunes Libraries folder in the iTunes folder.
Locate the file named iTunes Library YYYY-MM-DD where YYYY-MM-DD is the date you upgraded iTunes (Year-Month-Day).
Drag this file to the iTunes folder (the enclosing folder).
Rename this file to iTunes Library.
Open iTunes.
You should now see your missing content in iTunes.
via: No content shows up in iTunes after updating
http://support.apple.com/kb/TS1967
If that doesn't resolve the issue, then I'd go through the steps in here:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Have a good one,
Delgadoh

How to use "URLConnection" in sessions with more than one screen??

Hi,
Requests can be sent to http servers using "URLConnection" objects. The responses can be parsed via their InputStream; so far so good...
Question is:
What can I do when I want to send a request to a server where there is first a log-in screen and only then there is the desired screen where the real request should be sent?
Since the REAL request cannot be directly sent without the authentication check first, I need some kind of "context" or session in which I may make some consequent actions... Sending an independent request using a diferent URLConnection just won't do since I'm unauthorized via the second connection!!
Generally, I need a way to send consequent requests where the second request may be sent only if the first request authenticated me...
How can I do that? (Hope my question is clear...)
--Amir.

Well, you will have to deal with the cookies or however the server knows you are authenticated. Personally I prefer to use something like Apache HttpClient rather than dealing with icky details like that on my own.

How to use the same OC4j server with different port number

How to use the same OC4j server with different port numbers..?
I have to OC4J installed on my machine on different hard disk drives....
I want to be able to run both the server simultaneously..?
is it possible ..it yes then how..?
for that i have changed the port number of one server...
but when i am trying to start the other server with different port number..it says that JVM -Bind already...
Is there any clues...?
Nilesh G

In the config directory:
default-web-site.xml: Change the port the HTTP listener listens on
jms.xml: Change the port the JMS service listens on
rmi.xml: Change the port the ORMI listener listens on.
Or, you can add another web-site.xml file, and deploy your applications to 1 server, and bind the web applications to the different web sites. This way you only have to deploy your applications to 1 place.
Rob
Oracle

How to Use the same iview for both KM End User and the KM Administrator

Hi friends,
*This is my scenario :* How to Use the same iview for both KM End User and the KM Administrator but with different Context
Menu Options.
i followed these steps but im getting same context menu for both KM End User and the KM Administrator .
Assign the role Content Administrator to the user km_admin. This is needed so that km_admin can change
the presentation settings for the KM Folder u201EReports_kmFolder‟.
Now, login with user km_admin. Navigate to the Km Folder reports_kmFolder through Content Administration
-> Km Content. Click on Details link of the folder reports_kmFolder.
Go To Settings -> Presentation. Click on the tab u201ESettings for You‟-> Click on button u201ESelect Profile‟.
Select the radio button corresponding to u201Elayout Set‟, and choose u201EConsumerExplorer‟ from the dropdown.
Click u201EOK‟.
Select both the check boxes corresponding to Items Affected as shown above, and click u201ESave‟
Now, remove the u201ESuper Administrator‟ role from the user km_admin and login with this user.
How rto resolve this????
Regards,
Prasad.

Hello Prasad,
Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
Regards,
Lorcan.

How to use the same services-config for the local and remote servers.

My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
    <services>
        <service id="amfphp-flashremoting-service"
            class="flex.messaging.services.RemotingService"
            messageTypes="flex.messaging.messages.RemotingMessage">
            <destination id="amfphp">
                <channels>
                    <channel ref="my-amfphp"/>
                </channels>
                <properties>
                    <source>*</source>
                </properties>
            </destination>
        </service>
    </services>
    <channels>
    <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    </channel-definition>
    </channels>
</services-config>
I think the problem is the line
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
but I'm not sure how to use the same services-config for the local and remote servers.

paul.williams wrote:
You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
Hi Paul,
In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
-services=path/to/services-config.xml
IF
services-config.xml
have tokens in it and user have not specified additional
-context-root
and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
-services=path/to/services-config.xml
have been specified durring compilation.
I dont know any better way to exmplain this, but in summary there is two places that you can tell swf about service confogiration,
1) pass -services=path/to/services-config.xml parameter to compiler this way you tell swf file up front about all that good stuff,
or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

How to use the same email address for outgoing email on two iPads?

How to use the same email address for outgoing email on two iPads?. My wife and I both use the same email address. We receive the same incoming email on both iPads but are unable to send email from my wife's iPad. She is using an iPad 2 and is usng IOS 6.0.1

Hi Creaturekeeper,
If you've added the account into the iPad and you are unable to send email from it, then please follow the troubleshooting in the article below.
Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
Take care,
Alex H.

Can two people use the same computer with two different ipods?

I was just wondering if me and my mother can use the same computer with our ipods?

Glad you asked. Before you get rid of the old one move its iTunes Library to the new one:
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
"Deauthorize" the old computer too. Go to the iTunes Store menu and select "Deauthorize This Computer..."
I hope you get a Mac this time

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

I have an apple id but i have not been able to use the same id with i tune and app store..what to do

i have an apple id but i have not been able to use the same id with i tune and app store..what to do???every time i m trying to login it is telling that this id has not been used with i tune and App Store ....reviewing of my id is one of the option provided to me after this...

Have you logged in and reviewed your account and entered payment details ? Unless the instructions on this page are followed when creating an account : Create an iTunes Store, App Store, or iBooks Store account without a credit card or other payment method - Apple Suppor…
then credit card details will need to be entered before the account can be used to download any item from the store.
You could see if this post by mountaingoatgirl lets you review your account without needing to enter credit card details : https://discussions.apple.com/message/24303054#24303054
If not then you will either have to enter card details (you should be able to remove them after entering them), or create a new account (using the instructions on the above link).

Use the same form with different button turned on in different calls

Can I use the same form with different buttons turned on in different calls?
Thanks!

This is to avoid piracy. What could happen is, people could buy music, and give it away for free online. Usually it is then you buy a complete album off iTunes that it will only be available on one device. It is tied to that account, and the device must be registered to that account to listen to it.

How to use the class CL_CTMENU with the method DISABLE_FUNCTIONS

Hi Friends,
How to de-activate some functions in the Menu bar?
Eg: - Sales document
             Create
             Change
             Display
I want to de-activate "Change"
In other words: - How to use the class CL_CTMENU with the method DISABLE_FUNCTIONS in my program.
Regards,
Hari
Edited by: Bhatlapenumarthy Hari Krishna on Jun 9, 2008 5:22 PM

Krishna,
It is not possible to deactivate the CHANGE option in themenu bar using the method disable_functions of cass CL_CTMENU. This method allows you to deactivate only the function codes of the CONTEXT MENU, which is available only when u press the left mouse button.
U can use the SET PF-STATUS 'XXX' EXCLUDING fcodes option to disable the CHANGE.
*****Reward points if useful
Regards,
Kiran Bobbala

How to use the same BSA with more than an operating unit ?

Similar Messages

Maybe you are looking for