How to use the stock locators for more than one subinventory

Hi,
We are working in Oracle Applications 11i.
We have 4 different inventory organizations. Each with one main subinventory. One of those inventory organizations MWN has a subinventory defined with stock locators. The other three have their subinventories not defined with stock locators.
Now, correct me if I'm wrong please, I cannot define a stock locator for an existing subinventory while there are onhand items in that subinventory.
So, We will define new subinventory(for each inv org) with stock locators and then do a subinventory transfer to the new relevant new subinventory organization.
The next point is: the user requests to use the same stock locators for the 4 inventory organizations. is this possible?
thank you...

We had the same issue recently.
Users wanted same locator in the same org under different subinventories.
We suggested 2 solutions
1) Make the 1st locator segment=subinventory name (e.g. East.A.3.10, West.A.3.10)
2) Add a character to the first locator (e.g. EA.3.10, WA.3.10)
They picked up the 2nd option.
Hope this helps
Sandeep Gandhi
Omkar Technologies Inc.
Independent Techno-functional Consultant
513-325-9026

Similar Messages

  • Can I use the redemption code for more than one machine for Photoshop Elements?

    I want to use the Photoshop Elements that I bought on more than one machine. Is that
    possible using the Redemption Code? It says it was used with another Adobe ID.
    Thanks

    Hi Stover,
    Typically you use the redemption code to retrieve your serial number for Elements products. The licensing for Elements allows the owner to install on two of their computers.
    See these for reference:
    Redemption Code Help
    How many computers can I install Photoshop Elements on?
    Hope that helps,
    - Dave

  • How to use inbound exit class for more than one workflow step

    Hi All,
    In Offline Workflow Approval Scenarios where the work items are sent to outlook of non sap users inbox through workitem exit of the respective workflow item. Based on the user reply from outlook email(either approve or reject) which sends an auto reply to Offline user . We configure an inbound exit class and assign the same in the SMICM transaction. Based on the code written using SAP_WAPI function modules in inbound class exit offline user gets the user approval result and performs the action in SAP.
    My question now Is how can we use this inbound exit class for all the steps of a workflow.
    For ex: In a workflow I have a decision step followed by an activity step. First I will write the work item exit for the user decision step and inbound exit code for the user decision step and offline user executed the user decision step with approve action.
    followed by that I have an activity step for that I will code a work item exit for that activity level but how can I user the same inbound exit class for the activity step as well .
    Quick reply  would be of great  help for me.
    With Best Regards,
    Veni

    For the outbound processing you have the option of replacing the workflow exit by chancing the bsp application of the extended notification (see note 1448241 solution as an example of how to do the change) and replacing the standard links with a "mailto:...".
    As far as the inbound processing, that depends on what should be done in the activity step, if for example you have a bapi which executes what the user does you can call it in the inbound class instead of the user and then the relevant wapi (complete the workitem/raise event etc.).

  • There is a way to use the button enhance for more than one photo at a time?

    I have more than a thousand photos to edit,  this can help a lot.

    This might help:
    http://www.feroxsoft.com/ibe/index.php.en
    Regards
    TD

  • How to find the serial number for more than one Ipod Touch in Itunes?

    I lost my Ipod Touch (first one I bought), how can I find the serial number in Itunes or somewhere else beside I sync my daughter's new Ipod (2nd I bought) with my Itunes account, because when I try to find the serial number they show me only my daughters Ipod, not my Ipod????

    Hover the mouse pointer over your iPod backup in iTunes>Preferences>Devices and the SN will pop up.
    Go to:
    My Support Profile

  • Can we use same program ID for more than one RFC scenarios

    Hi experts,
                I am working on a RFC to FILE scenario. I have created one TCP/IP connection in SM59 with a program ID. Can we use this program ID for more than one scenario. I have written code as below
    data: iquote type standard table of ZIQMD initial size 0,
          IPRODUCT type standard table of ZPMS initial size 0,
          wa_quote type ZIQMD,
          wa_PRODUCT type ZPMS.
    CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER'
      TABLES
        I_QUOTE       = iquote          .
    CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER' in background task DESTINATION
    'ID4'
      TABLES
        I_QUOTE       = iquote          .
      COMMIT WORK.
    CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER'
      TABLES
        IPRODUCT       = IPRODUCT          .
    CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER' in background task DESTINATION
    'ID4'
      TABLES
        IPRODUCT       = IPRODUCT          .
        COMMIT WORK.
    when i am executing the code like this. i am able to send the data to 'Z_CBT_RFC_QUOTEMASTER'  , but iam not getting data  for 'Z_CBT_RFC_PRODUCTMASTER'  interface. ID4 is the connection that i have created in SM59. with program ID as ABCD.
                  Can i use the same connection for all interfaces.Please help in this, if we can use same connection for all interfaces. then how to make changes in XI.
    Thanks in advance.
    Thanks & Regards,
    Poorna.

    Just tried this and I can confirm that my earlier understanding was correct!
    One of my colleagues confused me out and the conclusion is,
    1. You need a separate TCP IP Connection for every interface with a Unique program ID.
    Regards
    Bhavesh

  • Use of same iTune for more than one iPod

    I need to find out whether I can use the same itune in one computer for more than one iPod nano and one iPod video?

    I looked at the article, but it doesn't help me know how once I have downloaded onto a nano, for example, the itunes knows that the next thing I connect is something different. My son hooked up his 20GB ipod last night after updating his sister's nano and now the itunes thinks his ipod is a nano. How do I get the itunes to recognize his ipod as the 20GB it is?

  • How to configure EM Grid Control for more than one databases?

    Hi,
    I'm configuring EM on Oracle 10gRel1 on Linux. I have more than one databases in the server, and I want use IE at my PC to monitor the databases on Linux server. I can configure and access the Grid Control Console by emca for first database, but cannot configure for the second one, unless I remove the first one configurration. How can I configure EM for more than one databases?
    Thanks.

    Thank you everybody.
    Yes, I'm talking about DBConsole rather than Grid Control (sorry for misuse the term). I managed to set up DB Console for every DB in the same Linux box (10Rel1). What I did is:
    1) stop db console and agent with emctl
    2) remove repository with RepManager
    3) config with emca
    Then I can monitor individual databases from my PC (but have to login with different port).
    I'm thinking mybe I should use Grid Control instead.

  • MDT Console with more then 15 machines, How to use the same drivers for more machines.

    Hello,
    I'm am looking for a solution to make our MDT design as effective as possible(as small as posible).
    The Situation:
    The company has more then 15 different computers added to the MDT console for the automated installation of Windows 7. The installations are done in 2 different ways, 1 with a local USB key installation (with the deployment folder on the USB key) and the other
    installation is a network USB key installation (with the deployment folder on the server).
    The local USB key exists for offices in parts of the world where the internet connection is poor.
    The problem:
    We have machines which can use the same driver for different kinds of hardware functions (LAN, WLAN, etc..)
    If we add a new machine to the MDT and we don't check the box for "Import drivers even if they are duplicates of an existing driver" we will automatic use the driver which already exists in the deployment folder. If say half a year
    later we stop using an older machine which "may" have drivers that are being used for other machines and we delete the machine from MDT we should
    NOT check the box "Completely delete these items, even if there are copies in other folders". The problem is that this can also lead to a lot of unused drivers in the deployment folder also because we do not know exactly how many
    computers are using a certain driver.
    At the moment we have another deployment share with for each machine its own drivers installed (so some drivers will be multiple times in the deployment folder) as you can guess this becomes really big.(deployment folder of more then 24 GB). The advantage
    of this is that we can delete a machine from the MDT list without having to worry if the drivers for that machine might be used by other machines. It is now just becoming to big in size(GB).
    The Question:
    Is there not an option within MDT that checks automatically if the drivers connected to a certain machine in MDT are being used by other machines? In this case we would check the box "Completely delete these items, even if there are copies in other folders"
    and MDT would not delete the drivers which are still used for the installations of other computers.
    Thanks in advance.
    Greets,
    Arie

    Arie,
    I think you are over-complicating this. Basically using drivers that already exist is the way to go. Otherwise drivers will be imported a second, third or fourth time. Which also takes up allot of disk space. If you're concerned about driver management,
    then I would suggest to drop your concerns, since there is nothing to less you can do about this particular issue. As long as you don't delete the driver that's been imported earlier by another machine there is nothing to worry.
    Ask yourself:
    - how long am I going to support model x
    - how many times do I want to update drivers
    With selection profiles you can easily target which content needs to go where (on your USB drive of-course)
    I can imagine that managing 25 shares for 25 different models, just because you 'refuse' to have old drivers in your share, or have removed support for some hardware models, isn't really time and energy efficient too.
    If you take a look in your deploymentshare\control folders you will see some XML files. These XML files hold all the entries in your deploymentshare. So your drivers.xml and drivergroups.xml (depending on the number of groups you have) are going to be very
    big XML files. These XML files are read by MDT to identify the objects in MDT and under which folder the objects are located.
    It's not possible to create or have an dependency between driver files and hardware models, other then creating groups under "Out-of-box Drivers" and using selection profiles.
    Another suggestion would be to decrease your number of hardware models drastically. On the other hand, having 25 Gb of offline media isn't really a big deal either. Portable and removable media of those sizes (32 and 64 Gb) isn't that expensive as it used
    to be 5 years ago.
    Don't get me wrong, I perfectly understand your desire to manage this, but MDT doesn't provide any other way, then the things I have pointed out to you here.
    Good luck! :)
    If this post is helpful please click "Mark for answer", thanks! Kind regards

  • Trying to use the same ground for more than two channels (RSE configuration) with usb 6000

    Hello,
    I'm currently trying to set up a LabView code in order to get readings of voltage using 5 different locations simultaneously. I want to only use the first location as ground and obtain 4 voltage measurements between the ground and each one of the other 4 channels. I'm using a usb 6000 which for now allows me to use the same ground for only two channels. Is there a way to use the same ground for 4 channels?
    Thank you,
    Maria

    You're right it is confusing the way I describe it so I ahve attached some pictures of the set up. The first figure is the cell filled with soil and the 5 probes inserted in it. The anode is placed at the left end of the cell and the cathode at the right end but they do not appear in the figure. I'm trying to use location 1 as gournd and take measurements of voltage from the following pairs: 1-2, 1-3, 1-4, and 1-5. The second figure is the DAQ I'm using. When I was trying to set up the RSE configuration, it was ussing ground A for the channels 6 & 7 (locations 2 and 3 in figure 1) but ground B for channels 4 & 5 (locations 4 and 5 in figure 1). What I am asking is which is the best way to use the signal from location 1 as the ground for all 4 channels. Is this more clear?
    Thank you for your time!
    Maria

  • How to use left outer join on more than one table (source)

    Hi all,
    In our project we are converting the Unix shell & SQL scripts into OWB mappings. We are facing problem converting left outer join in OWB. here is one of the example. i have just pasted the FROM and where condition.
    FROM ym_scr t1, branch_finmonth t3
    LEFT OUTER JOIN item_image t2
    ON (t1.branch_no = t2.branch_no
    AND t1.item_no = t2.item_no
    AND t3.to_date between t2.tran_dt and t2.to_dt
    AND t2.to_dt >= '$start_images' ) <<<========= '$start_images' THIS COMES FROM THE UNIX VARAIBLE ,
    We converts the same when we are putting it in OWB join Operator
    INGRP1.branch_no = INGRP2.branch_no(+)
    AND INGRP1.item_no = INGRP2.item_no(+)
    AND INGRP3.to_date between t2.tran_dt and t2.to_dt
    AND INGRP2.to_dt >= INGRP2.start_images
    But as you see in the OWB opreator we can put left join with INGRP1 with INGRP2.
    We can not make same join with INGRP3 & INGRP4 , becoz it failed saying "you cannot left outer join on more than one table/source".
    so overall this OWB code makes incomplete left outer join as per the above ANSI SQL join in Oracle.
    Bcoz of the problem we are getting less number of rows...........
    SO please please help me on this
    Regards
    Ashok

    Hi.
    I know this topic is here for a while now, but I had the same problem today, searched for help and didn´t find anything.
    Later I figured out how to do this.
    You just have to put the (+) one time, and the OWB converts in an LEFT OUTER JOIN statement.
    For this case, all you have to do is:
    ( INGRP1.branch_no = INGRP2.branch_no(+) AND INGRP1.item_no = INGRP2.item_no AND INGRP2.to_dt >= INGRP2.start_images )
    Regards,
    Godoy

  • How to prevent the User from loading more than one seq file?

    Hi,
    I would like to prevent the tester operator from loading more than one test sequence.  Any ideas how to do it?
    Thanks
    Rafi

    Hi Marty,
    Marty_H wrote:
    Hello mhousel,
    Testexec.exe by default loads the sequence files that were last open when it runs.  It is often desired behavior to have multiple sequence files load automatically. 
    [Mark Housel] Maybe for some but certainly not for me. 
    This should be easily handled by TestStand without any problems.  What do you mean by "chaos ensues"? 
    Certainly Teststand doesn't care a bit how many sequences are open.  But, when my sequences open they initialize HW of the ATE associated with
    that sequence file during the sequenceFileLoad callback.  e.g. I allocate TELNET handles to a terminal
    server that connects to multiple console within the system and als for
    the UUT.
    If a second sequence opens it knows nothing about the other sequence and again tries to open a TELENT session to the same port of the
    terminal server and obviously fails, so my sequence reports that it
    can't properly initialize the ATE HW.  Bad juju!
    Are your sequence files set to run automatically when they are loaded?
    I guess so.  Other than the trick of logging in as the special noExecution user and having special code in my sequence and modified Process Model I have no idea how to prevent a sequence fronm "runnin" when opened.
    If you want to prevent Testexec.exe from loading multiple files, you should be able to close out one of the open files when it loads and that sequence file should not load in the future.  I hope that helps.
    The trick I read somewhere else of modifying the Testexec.uir file to never re-load a sequence file automatically seemes to have covered up solved the problem.
    Thanks,
    Mark

  • How can I use the RMS.vi over more than one period?

    Hi everyone,
    I am using the Cycle average and RMS.VI to get the RMS value of a alternative voltage (2kHz). To acquire this signal I am using a differentiel AI of a 6225 card (at 250kS/s) and the RMS value is correct, it works fine. However from what I have understood, this VI calculates the RMS value according to only one period no matter how many samples I have acquired (2000 samples in the VI I have attached). Is this correct? If so, is ithere a way to use it over all of the 2000 samples to get a more averaged value? Or does another VI exist?
    I could repeat several time an acquisition of a short number of samples (a period) and make an average but it would take some time and I have to do this with 39 other Inputs on the same card one after the other...
    Thank you for your help,
    User
    Attachments:
    Forum.vi ‏76 KB

    User_1979 wrote:
    ....could you tell me if this VI sends a rms value of X compleat periods (even if I have send X periods and a half for example)?
    It gives the RMS value of only the newest set of data.
    The RMS and RMS Pt. By Pt. work for me, but it depends on how you break out that Dynamic Data from the Express VI, which was why I suggested you didn't use it - mainly because you can't tell what happens to that data when you wire it to a function and it coerces. Actually, I should say, I can't tell what happens to it. You may know, but I don't.  
    In the attached screenshot, I have "made" a 2k sine wave with an amplitude of 5. The indicators show RMS value.
    Richard
    Attachments:
    rms.gif ‏14 KB

  • How to use the same BSA with more than an operating unit ?

    we have three operating units, sometimes a sales agreement is released from the three operating units, is there a way i can use the same sales agreemnet with the three operating units?

    We had the same issue recently.
    Users wanted same locator in the same org under different subinventories.
    We suggested 2 solutions
    1) Make the 1st locator segment=subinventory name (e.g. East.A.3.10, West.A.3.10)
    2) Add a character to the first locator (e.g. EA.3.10, WA.3.10)
    They picked up the 2nd option.
    Hope this helps
    Sandeep Gandhi
    Omkar Technologies Inc.
    Independent Techno-functional Consultant
    513-325-9026

  • How to use "URLConnection" in sessions with more than one screen??

    Hi,
    Requests can be sent to http servers using "URLConnection" objects. The responses can be parsed via their InputStream; so far so good...
    Question is:
    What can I do when I want to send a request to a server where there is first a log-in screen and only then there is the desired screen where the real request should be sent?
    Since the REAL request cannot be directly sent without the authentication check first, I need some kind of "context" or session in which I may make some consequent actions... Sending an independent request using a diferent URLConnection just won't do since I'm unauthorized via the second connection!!
    Generally, I need a way to send consequent requests where the second request may be sent only if the first request authenticated me...
    How can I do that? (Hope my question is clear...)
    --Amir.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    Well, you will have to deal with the cookies or however the server knows you are authenticated. Personally I prefer to use something like Apache HttpClient rather than dealing with icky details like that on my own.

Maybe you are looking for

  • Looking for a new charger OR . . . .

    I have a PalmOne Zire 72s.  When I plugged in the charger today, I did not get a charing light nor did the handheld have the strike mark through the battery.  I called a number of outlets but they indicated they do not carry the required charger.  Wh

  • ITunes sync hangs only when syncing photos to Apple TV

    I just got an Apple TV, and updated it to the last software v2.4; iTunes is also running latest v 9x. I have a large library and the first sync took a long time but it got done successfully. But when I select images I want to sync in the 'photos' tab

  • Video Grayed Out

    When I connect my iPhone, some of the videos in the iTunes list are grayed out and do not sync to the device, even though I check them for syncing to the iPhone. Why is this?

  • Oracle 11g Fusion Middleware (11.1.1.3.0) Report Configuration Issue

    Oracle 11g Fusion Middleware (11.1.1.3.0) Report Configuration Issue ============================================= Hi All, I have installed Oracle 11g Fusion Middleware (11.1.1.3.0) on Oracle Linux 5 and getting some issues while configuring. What's

  • Invoice Blocked for Payment in MIRO tcode

    Dear All, After posting the invoice in MIRO, i am getting the message as Invoice posted, Blocked for payment. Where we need to do the settings for this ? In this case again i need to release this doc in MRBR, if i don't want this means, what i need t