How to use the video control buttons on YouTube with voice over

I have a Macbook Pro and since I am totally blind I use the voice over. I am watching YouTube videos but I can't access the buttons at the bottom of the screen. I can't play/pause the videos or use the slider. I ca't use any of those buttons. Is there sometihng I am missing here?

I dont know if you will be able to connect other device like PS3 or Wii.
As far as I know only the Xbox 360 could be connected to a Qosmio and could be used with the Windows MCE.
I presume this is possible due to connection of Microsoft products; MCE and Xbox360
To be honest; why you dont take a look into the user manual if this notebook is new to you?
All details are mentioned in the user manual which is already preinstalled on the notebook.

Similar Messages

  • I am no longer able to use the volume control buttons ( /-/or mute) on my key board in Windows 7

    1. HP Pavilion dm4 XO132AV
    2. Windows 7 64-bit
    3. No error message
    4. No changes were made prior to when the issue occured
    5. Question: I am no longer able to use the volume control buttons ( /-/or mute) on my key board in Windows 7

    Hi,
    Try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp50501-51000/sp50856.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, restart the notebook and let Windows fully load.  Open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, restart the notebook again.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How to use the custom control ?

    Hi Friends,
    plz help to use of  custom control in screen painter ?
    and how to use the custom control ?
    Thanking you.
    Regards,
    Subash.

    HI,
    Screen Elements
    A screen can contain a wide variety of elements, either for displaying field contents, or for allowing the user to interact with the program (for example, filling out input fields or choosing pushbutton functions). You use the Screen Painter to arrange elements on the screen.
    You can use the following elements:
    ·        Text fields
    Display elements, which cannot be changed either by the user or by the ABAP program.
    ·        Input/output fields and templates
    Used to display data from the ABAP program or for entering data on the screen. Linked to screen fields.
    ·        Dropdown list boxes
    Special input/output fields that allow users to choose one entry from a fixed list of possible entries.
    ·        Checkbox elements
    Special input/output fields that the user can either select (value ‘X’) or deselect (value SPACE). Checkbox elements can be linked with function codes.
    ·        Radio button elements
    Special input/output fields that are combined into groups. Within a radio button group, only a single button can be selected at any one time. When the user selects one button, all of the others are automatically deselected. Radio button elements can be linked with function codes.
    ·        Pushbuttons
    Elements on the screen that trigger the PAI event of the screen flow logic when chosen by the user. There is a function code attached to each pushbutton, which is passed to the ABAP program when it is chosen.
    ·        Frame
    Pure display elements that group together elements on the screen, such as radio button groups.
    ·        Subscreens
    Area on the screen in which you can place another screen.
    ·        Table controls
    Tabular input/output fields.
    ·        Tabstrip controls
    Areas on the screen in which you can switch between various pages.
    ·        Custom Controls
    Areas on the screen in which you can display controls. Controls are software components of the presentation server.
    ·        Status icons
    Display elements, indicating the status of the application program.
    ·        OK field
    Every screen has a twenty-character OK_CODE field (also known as the function code field) that is not displayed directly on the screen. User actions that trigger the PAI event also place the corresponding function code into this field, from where it is passed to the ABAP program. You can also use the command field in the standard toolbar to enter the OK field. To be able to use the OK field, you need to assign a name to it.
    All screen elements have a set of attributes, some of which are set automatically, others of which have to be specified in the Screen Painter. They determine things such as the layout of the screen elements on the screen. You can set the attributes of screen elements in the Screen Painter - either for a single element, or using the element list, which lists all of the elements belonging to the current screen. Some of the attributes that you set statically in the Screen Painter can be overwritten dynamically in the ABAP program.
    with regards,
    sowjanyagosala

  • How to use the cases in button action?

    Hi Experts,
    I want to get a prompt message if the field is empty.I got it but at the same time if the field is filled I want the other action to be performed that is to call a BAPI and give me output.How can I give two events for the same action.
    How to use the cases in button action?
    So, please guide me.Urgent need
    Regards
    Nutan

    Hi Nutan,
    if I understand you, then you have a simple validation. Therefore you can use the validation functionality of VC for your components. An alternative could be by writing a new ABAP RFC function module like:
    BAPI Input parameters as input and BAPI output parameters as output and an additional return code or string for a message:
    IF I_FIELD IS INITIAL.
      E_RETURN_CODE = "THE FIELD IS EMPTY."
    ELSE.
      CALL FUNCTION <YOUR_BAPI>
      <BAPI PARAMETERS>
    ENDIF.
    I hope that helps.
    Best Regards,
    Marcel

  • How to use the video in on 9500XT

    Hey I was wondering if there is any way to find out how to use the video in on my 9500XT
    I read on another forum but that didn't help me, so I throught this would be alot better beause MSI makes the card  
    Could anyone help me or give me links to find out how?
    Thanks!  

    Nobody knows?
    Come on someone must know  

  • How to use the special character pallet in Maverics with Illustrator

    How to use the special character pallet in Mavericks with Illustrator - I follow the help instructions, but the pasted in object looks like a rectangle with an X, I have done this before, in earlier versions of AI, but cannot make it work in CS6.
    In fact, I can open an old AI file (CS4), copy the character (a graphic symbol, also taken from the special character set), paste it in, and it works, but can't do this with a new one, from the drop down, Show Character Viewer, in the Mavericks menu bar.

    The box with an X indicates the font you are using does not have the glyph you are trying to paste. Try a different font.

  • How to use the standrad Refresh button in ooalv Grid?

    Hai Experts ,
                              i write editable oo alv program its works fine.  when change the data
    then click save button its saved correctly, but the problem is totals of row  & column not refresh when i am click the
    Refresh button . Please Help how to handle the standard Refresh button in ooalv .
    Thanks
    Adv....

    thank q u for ur reply,
                                            when i edit the data in grid and save the data its saved  successful,
    but the problem is manually i calculating the totals at the end of the Row as well as at end of the columns,
    when i edit the data in Grid that totals are not effected for that im using the Standard Refresh button ,
    Plz help me.

  • How to use the remote control in MediaSource Audio Play

    Hello,
    I bought myself the Creative X-Fi Elite Pro.
    I found out that I only can use the remote control in Media Center of the software.
    Now I want to use it in the Creative Audio Player whicht was also in the Box.
    Is there a way?

    Yes there is. I suggest trolling these boards for the 3rd party remote solutions that will free you to use the remote in ANY application like Winamp, Notepad, Windows Media Player, etc.
    Just my two opinionated cents...

  • Can I used the 'Random' shuffle button on CS6 with a standard DVD (blu-ray/web?)

    Hi guys,
    I'm just wondering if I can use the random shuffle button support on CS6 with a standard DVD?
    Thanks,
    Praga

    No... not on a DVD that you play in a player attached to a TV... from the user guide PDF
    Chapter PlayList support for Blu-ray and web DVDs
    Encore CS6 includes new options that provide more flexibility when you play chapter playlists:
    Sequential: Play chapter playlists sequentially.
    Random: Let the player randomly select a set of chapters to play.
    Shuffle: Let the player play all the chapters in any random order.
    Encore CS6 provides only the Sequential option for chapter playlists of DVD projects. Find these options in the Chapter PlayList panel. In addition,
    Encore CS6 supports Random and Shuffle options for chapter playlists in web DVDs.

  • How to use the BreadCrumb control

    Hi everyone,
    I'm trying to understand the use of BreadCrumb in NWs.
    I'd like to show the name of the current showed view in the step of BreadCrumb; I have 3 linked views in this sequence: 1 -2 -3; I select the view n.1, than view n.2 and finally the view n.3; the BreadCrumb  should show this result: view1 -> view2 -> view3.
    In addiction to this, the order of showed view could be changed at runtime! How can I do in this case?
    What should I use: MultipleBreadCrumbStep or "simple"Step?
    I saw that there isn't info enough in the SDN forum!
    Can you explain the right use of BreadCrumb to have the above result?
    Thanks
    Enrico

    To explain my problem in a complete manner, I write to you the other thread I have opened...
    ok!
    The situation is this:
    I used the componentization to create and manage several slave DCs and one root (master) DC.
    The root DC handles the view visibility of each slave DC, simply using a navigation ammong the interface views.
    I'd like to write down the name of current interface view (showed by the root DC) at runtime so that I could put these names in a BreadCrumb control (developed using Developer Studio).
    I also saw that a BreadCrumb utility exists in the Enterprise Portal.... but I think that control only works using one application url (of the root DC) and doesn't take trace of events inside each slave view!
    Is it correct? If yes, I couldn't use the BreadCrumb provided by the portal!
    I have to crate the communication between root DC and another DC which I will title to "BreadCrumb DC".
    The BreadCrumb DC would detect the navigation inside the root and show it in steps;
    the root DC would trace the navigation (of all interface slave views) and write down it into a context;
    this context could be exposed by interface controller of the root DC and sent to BreadCrumb DC.
    Well.... how can realize this project?
    I'm thinking about it but I can't solve the dilemma!
    May you help me?
    Thanks in advance,
    Enrico

  • I don't understand how to use the volume control on the new iphone headphones

    I just bought the new style earphones for my iphone and it has a new volume control -- how does it work?  On the old one you just pushed up or down for volume control but now it just increases volume for the time you hold it down?  Does anyone know how to use this properly?

    I have had good success with the System Font Panel. Now all of a sudden, I only get part of it. Any suggestions on how to restore the entire panel? There are no change size options in the corners like in some dialog boxes. I was going to paste what I have here, but for some reason, paste is not available.

  • How to use the treeview control

    I tried to use the treeview in the form builder.
    But I failed.
    If anyone can give me the guideline or related data,
    I'll be grateful.
    Thanks.

    Hi,
    Based on your description, my understanding is that you want to use treeview control in InfoPath 2013.
    Per my knowledge, There is no treeview control in Infopath 2013. Have you used the solution from third party? if it is , I suggest that you seek the third party for help. 
    Besides, here is a similar post, you can take a look at:
    http://www.infopathdev.com/forums/p/8978/80652.aspx
    Best Regards,
    Lisa Chen
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Lisa Chen
    TechNet Community Support

  • How to use the phone's Mini-Keyboard Input with the 'Textbox'(MIDP2.0)?

    (My apology. My English is not perfect but I'll try my best. >_<)
    Hi. I'm trying to create a textbox(in my own little application) that is compatible with the mini-keyboard input feature.
    This problem involved any device that have a built-in "mini-keyboard".
    Problem:
    I tried the 'Textbox' class from MIDP2.0 but the result, as expected, is like using the phones with no built-in keyboard.
    (Forexample if I want to input the character 'C' inthe text box, I need to press number '2' button three times to let it circle through 'A' -> 'B' then 'C'. )
    Then I tried entering URLs in the phone's built-in web browser, the result is I can use the mini keyboard to type like a PC keyboard.
    Question: How do I implement such textbox that is fully compatible with the built-in mini Keyboard?
    I tried browsing through the MIDP2.0 API but it seems the 'Textbox' class there couldn't do it.
    Thank you. =)
    /bow
    Edit/Delete Message

    The textbox should have input just as any other normal phone input. If not, something strange is going on.
    Anyway , there is no use to make your own input method, since every phone has another implementation of this anyway. It would only confuse users.

  • When selecting the camera on 3gs the screen just goes black i can still take a photo using the top volume button but not with the screen please help

    hello there
    when selecting the camera on my 3gs the screen goes black and has no responce i can take a picture with the top volume button but cannot see it until i open photos
    please can anyone help
    thankyou andy

    Try closing the Camera app completely and see if it works properly when you re-open the app : from the home screen (i.e. not with the Camera app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work also do a reset (unless this is what you mean by powering off and restarting) : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • How to make the common control button for all pages in TABCONTROL​?

    Dear all,
               I'm using TABCONTROL for my application. I'm having STOP and SAVE control. I have to show this button to all pages  in TABCONTROL.. How do i make it?
    Kindly help me?..
    Regards,
    Srinivasan.P
    Solved!
    Go to Solution.

    Hi srinivasan,
    If you want to keep "Save" and "Stop" common, Why do you want to keep them on Tab control? Is your tab control taking entire space on Front panel? If so, you can have SAVE and STOP on other vi, and you can call this vi (MODAL).
    Gaurav k
    CLD Certified !!!!!
    Do not forget to Mark solution and to give Kudo if problem is solved.

Maybe you are looking for