How to use ttBulkCp utility without locking the DB?

Hi,
With the version of TimesTen i have installed on my DB, ttBulkCp utlity locks the DB while copying the data from an ASCII file to TimesTen tables.
Could any one please tell me an alternative so that DB is not locked while copying the data?

Hi,
ttBulkCp does not lock the DB explicitly either in the latest TimesTen versions nor even in older ones. Can you please advise what version of TimesTen you are using and the ODBC DSN settings you have for the datastore in question. Maybe you have datastore level locking configured?
Thanks,
Chris

Similar Messages

  • How can I protect formulae in a newly created spreadsheet without locking the whole sheet ?

    How can I protect formulae from being overwritten on a newly created spreadsheet without locking the whole sheet ?

    Olly,
    I'll be picky here on nomenclature ;-)
    Tables and other Obects can be locked, but Sheets can't be locked.
    If you wish to shield some parts of your content from accidental modification, arrange your layout to put that sensitive content in tables separate from the tables that need to be accessed, and lock the sensitive ones. It's also possible, but rather clunky, to place shields over the sensitive area. A shield can be made by Inserting a Shape and positioning the shape over the sensitive area. With the shape selected, go to the Graphics Inpector and set the Opacity of the shape to zero. You will then be able to see through the shape but will no be able to Click through it to get at the cells below. This method is inconvenient because you have to worry about keeping the shape aligned with the table should the table need to change size or shape.
    Jerry

  • How do you convert .AVI files for using in iMovie without losing the original clip time and date

    Hi everyone! does anyone know how to convert .AVI files for using in iMovie without losing the original clip time and date? Handbrake, MPEG Streamclip and Evon all replace the original timecode with the date of modification. This is very frustrating when you are trying to keep the chronology right. I know that if you upload the files to iMovie from one device the chronology isn't a problem, but I'm adding video files from a couple of iPhones and a couple of camcorders. any help much appeciated.
    paul

    Hi everyone! does anyone know how to convert .AVI files for using in iMovie without losing the original clip time and date? Handbrake, MPEG Streamclip and Evon all replace the original timecode with the date of modification. This is very frustrating when you are trying to keep the chronology right. I know that if you upload the files to iMovie from one device the chronology isn't a problem, but I'm adding video files from a couple of iPhones and a couple of camcorders. any help much appeciated.
    paul

  • How to use Boot Camp without an operating disk

    Purchased my iMac and received an upgrade to Snow Leapord a week later.  Have upgraded several times and now have Lion operating system.  Have never received an operating system disc.
    Used Boot Camp to partition for PC programs.  Boot Camp does not work properly without "insert operating system disc" being completed.
    Any one have an idea as to how to get a functioning partition without the operating system disc ??

    I suspect that you're asking about an OSX installation disc, not a Windows disc.
    There could be one of two issues here.
    If Boot Camp is asking for an installation disc BEFORE it's able to partition the drive, it's asking for your Windows installation disc. You should have one if you purchased Windows. You need to purchase Windows to use Boot Camp. I recommend buying the full version of Windows Home or Pro, not the upgrade version -- the upgrade is difficult to install for non-experts.
    If you're looking for an OSX installation disc, and, like me, you upgraded to Lion through the app store, you will have to go through a back-door process in order to create this disc. Here's an article on this. http://www.macworld.com/article/161069/2011/07/make_a_bootable_lion_installer.ht ml (I can't guarantee it works. I made a disc like this because I thought I needed it to reload from a Time Machine backup, but it turns out that Lion doesn't require the disc for this, so I never used it.)
    When I installed Boot Camp and Windows, I didn't need the OSX installation disc. I'm not sure why you would, in this process. It should only ask for your Windows disc.
    If for some reason you downloaded Windows from Microsoft instead of buying a package with a disc, you need to download the ISO version and burn it to a DVD. See this article on downloading the ISO: http://www.mydigitallife.info/windows-7-iso-x86-and-x64-official-direct-download -links-ultimate-professional-and-home-premium/ (Make sure you choose the ISO that matches the version you bought).
    Here's instructions on burning an ISO with Disk Utility: http://lifehacker.com/251758/mac-tip--how-to-burn-an-iso-or-dmg-file-to-disc And this thread on burning a Windows DVD in OSX: https://discussions.apple.com/thread/2039118?start=0&tstart=0 (Summary: you can use Disk Utility to burn the ISO, but choose a slow burn speed)
    Lots to read but that should hopefully help.

  • Hi. I wanted to know how to use my macbook retina to the best of its potential.

    This is what the system is currently showing:
    EtreCheck version: 1.9.12 (48)
    Report generated 21 June 2014 18:32:04 GMT-3
    Hardware Information:
      MacBook Pro (Retina, 15-inch, Late 2013) (Verified)
      MacBook Pro - model: MacBookPro11,3
      1 2.3 GHz Intel Core i7 CPU: 4 cores
      16 GB RAM
    Video Information:
      Intel Iris Pro - VRAM: (null)
      NVIDIA GeForce GT 750M - VRAM: 2048 MB
      Color LCD 2880 x 1800
    System Software:
      OS X 10.9.3 (13D65) - Uptime: 3 days 9:47:47
    Disk Information:
      APPLE SSD SM0512F disk0 : (500.28 GB)
      EFI (disk0s1) <not mounted>: 209.7 MB
      Macintosh HD (disk0s2) / [Startup]: 499.42 GB (266.59 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information:
      Apple Internal Memory Card Reader
      Apple Inc. iPhone
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
    Thunderbolt Information:
      Apple Inc. thunderbolt_bus
    Gatekeeper:
      Anywhere
    Kernel Extensions:
      [not loaded] net.kromtech.kext.AVKauth (2.3.6 - SDK 10.8) Support
      [not loaded] net.kromtech.kext.Firewall (2.3.6 - SDK 10.8) Support
    Launch Daemons:
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.adobe.SwitchBoard.plist Support
      [loaded] com.tunnelbear.mac.tbeard.plist Support
      [running] com.zeobit.MacKeeper.AntiVirus.plist Support
      [running] com.zeobit.MacKeeper.plugin.AntiTheft.daemon.plist Support
    Launch Agents:
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [running] com.kodak.BonjourAgent.plist Support
    User Launch Agents:
      [loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.adobe.ARM.[...].plist Support
      [loaded] com.google.keystone.agent.plist Support
      [loaded] com.kodak.KODAK AiO Annual Opt.plist Support
      [loaded] com.kodak.KODAK AiO Firmware Updater.plist Support
      [loaded] com.kodak.KODAK AiO Software Updater.plist Support
      [running] com.kodak.StatisticCollection.plist Support
      [running] com.spotify.webhelper.plist Support
      [running] com.zeobit.MacKeeper.Helper.plist Support
    User Login Items:
      iTunesHelper
      Music Manager
      Spotify
      Google Chrome
    Internet Plug-ins:
      FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      AdobePDFViewerNPAPI: Version: 10.1.10 Support
      AdobePDFViewer: Version: 10.1.10 Support
      Flash Player: Version: 13.0.0.214 - SDK 10.6 Outdated! Update
      Default Browser: Version: 537 - SDK 10.9
      Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
      JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
    Safari Extensions:
      Searchme: Version: 1.3
      Amazon Shopping Assistant: Version: 1.1
      Slick Savings: Version: 2.0
      Ebay Shopping Assistant: Version: 1.1
    Audio Plug-ins:
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    User Internet Plug-ins:
      npsf_uni: Version: sf 3.3.2.1 Support
    3rd Party Preference Panes:
      Flash Player  Support
    Time Machine:
      Skip System Files: NO
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 465.12 GB Disk used: 216.84 GB
      Destinations:
      ZU UK 2013-14 [Local] (Last used)
      Total size: 931.51 GB
      Total number of backups: 8
      Oldest backup: 2014-03-16 03:19:04 +0000
      Last backup: 2014-06-07 16:39:22 +0000
      Size of backup disk: Adequate
      Backup size 931.51 GB > (Disk used 216.84 GB X 3)
      Time Machine details may not be accurate.
      All volumes being backed up may not be listed.
    Top Processes by CPU:
          2% WindowServer
          2% fontd
          1% Google Chrome
          0% mds_stores
          0% com.apple.WebKit.Networking
    Top Processes by Memory:
      262 MB WindowServer
      147 MB softwareupdated
      147 MB Google Chrome
      131 MB com.apple.MediaLibraryService
      131 MB iTunes
    Virtual Memory Information:
      9.41 GB Free RAM
      3.67 GB Active RAM
      447 MB Inactive RAM
      1.58 GB Wired RAM
      78.53 GB Page-ins
      0 B Page-outs

    Follow these instructions to uninstall MacKeeper. They have been tested with the most recent version of MacKeeper. Earlier versions than the one released in 2012 require more extensive work to uninstall all its components. Never install such junk on a Mac.
    If you actually used MacKeeper to alter your system, e.g. "remove excess binaries" or such, you will need to reinstall OS X as well as all your additional software. Uninstalling MacKeeper is insufficient to reverse the corruption it is capable of - once again, that is if you used it.
    If you merely installed MacKeeper but did not use it to perform any particular action, the following instructions will suffice.
    If you used MacKeeper to encrypt any files or folders, use MacKeeper to un-encrypt them first.
    Quit the MacKeeper app if it is running.
    Open your Applications folder: Using the Finder's Go menu, select Applications.
    Drag the MacKeeper icon from your Applications folder (not the Dock) to the Trash.
    You will be asked to authenticate (twice):
    You do not need to provide a reason for uninstalling it:
    Just click the Uninstall MacKeeper button. You will be asked to authenticate again.
    After it uninstalls you may empty the Trash and restart your Mac. All that will remain is an inert log file that does nothing but occupy space on your hard disk.
    May I suggest that you review the following setting in System Preferences?
    Although you may easily override that setting, it will serve to protect you from inadvertently installing garbage. The overwhelming majority of Macs I come across have the MacKeeper installer file already present in their Downloads folder, often multiple copies of it. The downloaded file itself can do nothing until it is opened and installed, and the above setting (known as Gatekeeper - not to be confused with MacKeeper) will prevent that from occurring.
    I wanted to know how to use my macbook retina to the best of its potential.
    Never install any product that claims to "speed up", "clean up", "optimize", or "accelerate" your Mac. Without exception, they will do the opposite.
    Never install pirated or "cracked" software, software obtained from dubious websites, or other questionable sources. Illegally obtained software is almost certain to contain malware.
    Don’t supply your password in response to a popup window requesting it, unless you know what it is and the reason your credentials are required.
    Don’t open email attachments from email addresses that you do not recognize, or click links contained in an email:
    Most of these are scams that direct you to fraudulent sites that attempt to convince you to disclose personal information.
    Such "phishing" attempts are the 21st century equivalent of a social exploit that has existed since the dawn of civilization. Don’t fall for it.
    Apple will never ask you to reveal personal information in an email. If you receive an unexpected email from Apple saying your account will be closed unless you take immediate action, just ignore it. If your iTunes or App Store account becomes disabled for valid reasons, you will know when you try to buy something or log in to this support site, and are unable to.
    Don’t install browser extensions unless you understand their purpose. Go to the Safari menu > Preferences > Extensions. If you see any extensions that you do not recognize or understand, simply click the Uninstall button and they will be gone.
    Don’t install Java unless you are certain that you need it:
    Java, a non-Apple product, is a potential vector for malware. If you are required to use Java, be mindful of that possibility.
    Java can be disabled in System Preferences.
    Despite its name JavaScript is unrelated to Java. No malware can infect your Mac through JavaScript. It’s OK to leave it enabled.
    Block browser popups: Safari menu > Preferences > Security > and check "Block popup windows":
    Popup windows are useful and required for some websites, but popups have devolved to become a common means to deliver targeted advertising that you probably do not want.
    Popups themselves cannot infect your Mac, but many contain resource-hungry code that will slow down Internet browsing.
    If you ever see a popup indicating it detected registry errors, that your Mac is infected with some ick, or that you won some prize, it is 100% fraudulent. Ignore it.
    Ignore hyperventilating popular media outlets that thrive by promoting fear and discord with entertainment products arrogantly presented as "news". Learn what real threats actually exist and how to arm yourself against them:
    The most serious threat to your data security is phishing. To date, most of these attempts have been pathetic and are easily recognized, but that is likely to change in the future as criminals become more clever.
    OS X viruses do not exist, but intentionally malicious or poorly written code, created by either nefarious or inept individuals, is nothing new.
    Never install something without first knowing what it is, what it does, how it works, and how to get rid of it when you don’t want it any more.
    If you elect to use "anti-virus" software, familiarize yourself with its limitations and potential to cause adverse effects, and apply the principle immediately preceding this one.
    Most such utilities will only slow down and destabilize your Mac while they look for viruses that do not exist, conveying no benefit whatsoever - other than to make you "feel good" about security, when you should actually be exercising sound judgment, derived from accurate knowledge, based on verifiable facts.
    Do install updates from Apple as they become available. No one knows more about Macs and how to protect them than the company that builds them.
    Summary: Use common sense and caution when you use your Mac, just like you would in any social context. There is no product, utility, or magic talisman that can protect you from all the evils of mankind.

  • How can i transfer videos without losing the sound to my iPhone 3G?

    Hi
    I have bought my iPhone 3G yesterday. I have found out how to transfer music from iTunes however i can't transfer videos. I'm selecting the videos i want to transfer on the videos tab after i chose my iphone from the side menu and pressing apply. iTunes says that its syncing my iphone but it doesnt transfer the videos.
    Lately i have found out a function on the advanced menu for movies as "create iphone or ipod version". When i used that it transfered that video to my iPhone however the sound was completely lost besides that action takes too much time(around 10 mins for a 3 min video and i have a pretty strong computer).
    How can i transfer videos without losing the sound to my iPhone 3G?

    One thing I'd recommend is that you make sure the video/audio you're trying to transfer falls within the guidelines listed in the 'Video' section here:
    http://www.apple.com/iphone/specs.html
    What's most likely happening is that the file is not converted as such so when you try to transfer it, it's wanting to convert it but is unable to for any number of reasons.
    There's software out there that might make this easier for you but I can't recommend anything specifically.

  • How to use Add Query Criteria for the MySQL data Base in Netbeans ?

    How to use Add Query Criteria for the MySQL data Base in Netbeans Visual web pack.
    When the Query Criteria is add like
    SELECT ALL counselors.counselors_id, counselors.first_name, counselors.telephone,counselors.email
    FROM counselors WHERE counselors.counselors_id = ?
    when i run this Query in the Query Window
    i get a error message Box saying
    Query Processing Error Parameter metadata not available for the given statement
    if i run the Query with out Query Criteria its working fine.

    *I am glad I am not the only one who have this problem. Part of issue has been described as above, there are something more in my case.
    Whenever I try to call ****_tabRowSet.setObject(1, userDropList.getSeleted()); I got error message as shown below:*
    The Java codes are:
    public void dropDown1_processValueChange(ValueChangeEvent event) {
    Object s = this.dropDown1.getSelected();
    try {
    this.User_tabDataProvider1.setCursorRow(this.User_tabDataProvider1.findFirst("User_Tab.User_ID", s));
    this.getSessionBean1().getTrip_tabRowSet1().setObject(1, s);
    this.Trip_tabDataProvider1.refresh();
    } catch (Exception e) {
    this.log("Error: ", e);
    this.error("Error: Cannot select user"+e.getMessage());
    SQL statement for Trip_tabRowSet:
    SELECT ALL Trip_Tab.Trip_Date,
    Trip_Tab.User_ID,
    Trip_Tab.Destination
    FROM Trip_Tab
    WHERE Trip_Tab.User_ID = ?
    Error messages are shown below:
    phase(RENDER_RESPONSE 6,com.sun.faces.context.FacesContextImpl@5abf3f) threw exception: com.sun.rave.web.ui.appbase.ApplicationException: java.sql.SQLException: No value specified for parameter 1 java.sql.SQLException: No value specified for parameter 1
    com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.cleanup(ViewHandlerImpl.java:559)
    com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.afterPhase(ViewHandlerImpl.java:435)
    com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:274)
    com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
    javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
    org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
    org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
    org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
    com.sun.webui.jsf.util.UploadFilter.doFilter(UploadFilter.java:240)
    org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
    org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
    org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
    org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
    org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
    org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:276)
    org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
    org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
    org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
    org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
    org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
    com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
    org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
    org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
    com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
    org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
    org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
    org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
    org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
    org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
    org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
    com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
    com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
    com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
    com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
    com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
    com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
    com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
    tandardWrapperValve[Faces Servlet]: Servlet.service() for servlet Faces Servlet threw exception
    java.sql.SQLException: No value specified for parameter 1
    at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:910)
    at com.mysql.jdbc.PreparedStatement.fillSendPacket(PreparedStatement.java:1674)
    at com.mysql.jdbc.PreparedStatement.fillSendPacket(PreparedStatement.java:1622)
    at com.mysql.jdbc.PreparedStatement.executeQuery(PreparedStatement.java:1332)
    at com.sun.sql.rowset.internal.CachedRowSetXReader.readData(CachedRowSetXReader.java:193)
    at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:979)
    at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:1439)
    at com.sun.data.provider.impl.CachedRowSetDataProvider.checkExecute(CachedRowSetDataProvider.java:1274)
    at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorRow(CachedRowSetDataProvider.java:335)
    at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorIndex(CachedRowSetDataProvider.java:306)
    at com.sun.data.provider.impl.CachedRowSetDataProvider.getRowCount(CachedRowSetDataProvider.java:639)
    at com.sun.webui.jsf.component.TableRowGroup.getRowKeys(TableRowGroup.java:1236)
    at com.sun.webui.jsf.component.TableRowGroup.getFilteredRowKeys(TableRowGroup.java:820)
    at com.sun.webui.jsf.component.TableRowGroup.getRowCount(TableRowGroup.java:1179)
    at com.sun.webui.jsf.component.Table.getRowCount(Table.java:831)
    at com.sun.webui.jsf.renderkit.html.TableRenderer.renderTitle(TableRenderer.java:420)
    at com.sun.webui.jsf.renderkit.html.TableRenderer.encodeBegin(TableRenderer.java:143)
    at javax.faces.component.UIComponentBase.encodeBegin(UIComponentBase.java:810)
    at com.sun.webui.jsf.component.Table.encodeBegin(Table.java:1280)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:881)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
    at com.sun.faces.application.ViewHandlerImpl.doRenderView(ViewHandlerImpl.java:271)
    at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:182)
    at com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.renderView(ViewHandlerImpl.java:285)
    at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:133)
    at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:244)
    at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
    at javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
    at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
    at com.sun.webui.jsf.util.UploadFilter.doFilter(UploadFilter.java:240)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
    at org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:276)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
    at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
    at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
    at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
    at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
    at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
    at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
    at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
    at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
    at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
    at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
    at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
    at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
    at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
    Also when I tried to update my MYSQL connector / J driver to version 5.1.5 from 5.0.5 (NB 5.5.1) and 5.0.7 (NB 6.1), I could not get it work (looooong time to search some JDBC classes and with no response in the end) on both of my Netbean 5.5.1(on PC) and Netbean 6.1(on laptop) IDEs.
    Could anybody look into this issue.
    Many thanks
    Edited by: linqing on Nov 22, 2007 4:48 AM

  • Urgent:How to modify a script without changing the print programme

    Hi all,
    Can any body pls tell me <b>How to modify a script without changing the print programme</b>
    Give m esome real time examples.
    Good points willbe rewarded
    Thanks

    Hi
    You can write a external Subroutine to fetch the extra data into the script program
    see the following sample code
    How to call a subroutine form SAPscripts
    The Form :
    /:PERFORM CDE_CENT IN PROGRAM ZKRPMM_PERFORM_Z1MEDRUCK
    /:USING &EKKO-EBELN&
    /:CHANGING &CDECENT&
    /:ENDPERFORM
    The report :
    REPORT zkrpmm_perform_z1medruck .
    DATA : BEGIN OF it_input_table OCCURS 10.
    INCLUDE STRUCTURE itcsy.
    DATA : END OF it_input_table.
    déclaration de la table output_table contenant les
    variables exportées
    DATA : BEGIN OF it_output_table OCCURS 0.
    INCLUDE STRUCTURE itcsy.
    DATA : END OF it_output_table.
    DATA : w_ebeln LIKE ekko-ebeln,
    w_vbeln LIKE vbak-vbeln,
    w_zcdffa LIKE vbak-zcdffa.
    FORM CDE_CENT
    FORM cde_cent TABLES input output.
    it_input_table[] = input[].
    it_output_table[] = output[].
    READ TABLE it_input_table INDEX 1.
    MOVE it_input_table-value TO w_ebeln.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
    input = w_ebeln
    IMPORTING
    output = w_ebeln.
    SELECT SINGLE zcdffa FROM ekko
    INTO w_zcdffa
    WHERE ebeln = w_ebeln.
    it_output_table-name = 'CDECENT'.
    MOVE w_zcdffa TO it_output_table-value.
    MODIFY it_output_table INDEX 1.
    output[] = it_output_table[].
    ENDFORM.
    COPING SCRIPT
    There are some Standard Sap Scripts in SAP. We cant directly execute them in scripts we have to use some T-codes and by giving some input to the required fields we can see the output printform.
    I will show one example. There are some Standard Sap Scripts such as MEDRUCK which is a standard Sap Script for Purchase Order and RVINVOICE01 for billing and so on...
    To see oupt of MEDRUCK go to T-code ME9F give purchase order number and execute select one number and click on dislplay messages button on application tool bar you can find the print form of MEDRUCK.
    You cannot change the Standard Sap Scripts but you can use Standard Sap Scripts and Copy them to userdefined Script and can make changes to them and replace standard Sap Script with usedefind script.
    Ex: Go to SE71,
    on menu bar u find Utilities->copy from Client. click on it u ll find new screen showing
    Form name:
    Source Clinet:
    Target Form:
    give Form name as usedefined form name EX: ZFORM1
    Source client as 000 and
    Target form as MEDRUCK.
    execute.
    Now, the standard from MEDRUCK is copyied to your form ZFORM1.
    NOW, go to SE71 and give form name as ZFORM1 and do some changes to the form such as adding logo any thing. save and Activate.
    Now, you have done changes to the Form ZFORM1 and u have to replace your form with standard SAP Script.
    Go to NACE Transaction.
    on Applications select EF for purchase order and click Output types button on application tool bar.
    now select NEU as output types dobule click on Processing Routines.
    now click on Change option on application tool bar and on right side u find MEDRUCK in form place replace MEDRUCK with ZFORM1 and SAVE.
    go back twice and now go to T-code ME9F give the purchase order number and execute and select one option and click on display messges button .
    you will find the changes that you have done in ZFORM1. so we cant chage the standard Sap Scripts by copying the Standard Sap Scripts we can chage and replace with our forms
    Refer
    https://forums.sdn.sap.com/click.jspa?searchID=4089895&messageID=3239299
    Regards
    Message was edited by:
            Kiran Sure(skk)

  • How to call or open without specifying the full path?

    hi all,
    how to call or open without specifying the full path?
    for example the following code of a when_button_pressed trigger.
    call_form('c:\test\student.fmx',hide,do_replace);
    open_form('c:\test\student.fmx');
    i want to specify only the form name.
    call_form('student.fmx');
    open_form('student.fmx');
    i m using developer 2000.
    regard
    Muhammad Nadeem
    [email protected]

    HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\FORMS60_PATH=c:\test\;c:\orant\bin;...

  • HT201304 I need to restrict access to Settings on an iPad so settings like VoiceOver cannot be activated while letting them access multiple apps on the device. Is their any way to restrict access to settings without locking the device with a PIN?

    I need to restrict access to Settings on an iPad so settings like VoiceOver cannot be activated while letting them access multiple apps on the device. Is their any way to restrict access to settings without locking the device with a PIN?
    This is so our guests cannot tamper or disable the device. We are already using Apple Configurator but their does not seem to be a way to lock down settings without a PIN.

    There's a lot of restrictions information in Chapter 19 of the 4.2 User Guide.
    http://support.apple.com/manuals/#ipad
    By the way, a more extensive version of the User Manual is available at no charge through iBooks.

  • How to use spell checker without mouse?

    Hi,
    how to use spell checker without mouse?
    And how to quickly change between languages related to documents, and be able to quickly get back to the main language setting that should be the default for the system?

    And how to quickly change between languages related to documents
    If you are talking about input keyboards, this is controlled by shortcuts that are explained at the top right of system prefs/language & text/input sources.

  • How do I restart apex without restarting the database?

    As the title says... How do I restart apex without restarting the database?
    For the second time in as many weeks apex 3.0.1(?) has stopped working while the database (10gR2) hasn't missed a beat.
    How do I restart apex?
    How do I get it to restart automatically on failure.
    How do I receive failure notification messages.
    How do I diagnose the cause of the failure.
    We were looking at using apex in a production environment but the prospect of unplanned restarts of production databases every week is a little daunting.
    Regards,
    David

    David,
    >> We're not using oracle http server as it's a 64 bit version so yes the whole thing is running within the database.
    1) So your Web server is the XDB HTTP protocol server and embedded PL/SQL gateway (basically, the database's embedded Web server)? Is this 11g? If so, what platform?
    2) Are there any reported issues in the database alert log?
    3) When you check the status of the database listener, does it show services running for this specific port (default 8080, I guess)?
    4) If you normally go to http://server:port/apex, when this situation occurs, what happens when you try and go to http://server:port?
    Joel

  • Help:how to use java.util.jar to zip or unzip a binary file.

    how to use java.util.jar to zip or unzip a binary file or a file contain native code.

    It may help you to know how I add JARs
    1. I open my Project (myProject)
    2. I Mount the JAR to the FileSystem (like mypackages.jar = which includes com.mus.de.myClass.java)
    3. I Mount the File to the FileSystem (like c:\..myfiles..\myProject)
    3.1 I add the File to my Project
    4. I select File | New -> Classes | Main
    4.1 I typed "import com.mus.de.myClass.java" to refer to this package.
    4.2 I called some of the public methods
    thats it
    Andreas

  • HT201541 How can I update Safari without updating the OS?

    How can I update Safari without updating the OS? I presently have 10.7.5 and 1.6.1
    I am getting too many notices that my browser is out of date...
    b
    PS, a note to Apple. You use terms like Mountain Lion,  Yosemite, etc. But in other places you use
    10.6, 11.7, etc. Could you be consistent? use one or the other, not both. Please. Or always use both together.

    Shoot Apple, you don't make things easy. I don't want to upgrade OS as you now require an itunes account to get upgrades, and I'm against that. (until I have to).
    So I switched to the chrome browser, that works.
    PS, Ralph, yes, I can lookup the version numbers, but I have not felt the need to memorize them. My question is why does apple make it so difficult that we have to memorize the version number to name correspondence?
    b

  • How to Use Discoverer Desktop without Database User ?

    Hi,
    I am new to Discoverer Desktop,
    How to Use Discoverer Desktop without Database User ?
    Suresh

    You'll need to have access to some sort of database account to use the tool. If you just loaded the tool onto a machine, Disco is not going to be useful - you need to create an end user layer, and business areas.
    I suggest you start here:
    www.oracle.com/technology/documentation/bi.html

Maybe you are looking for