How to use user defined function in select query using Toplink

Hi Friends
I am little bit of new in Toplink stuff... so please help me...
I have to database functions 1. encrypt and 2. decrypt.
I want to exceute the following sql query using toplink
select port, database, user_name, decrypt(encrypt('String which is to be encrypt ','password'),'password') from CONFIGURATION
can anyone tell me , how to write code in toplink which will give the about sql output.
thanks .....

The "Specifying a Custom SQL String in a DatabaseQuery" section in the TopLink Developer's Guide may help... http://download-uk.oracle.com/docs/cd/B32110_01/web.1013/b28218/qrybas.htm#BCFHDHBG

Similar Messages

  • Using User Defined Function is SQL

    Hi
    I did the following test to see how expensive it is to use user defined functions in SQL queries, and found that it is really expensive.
    Calling SQRT in SQL costs less than calling a dummy function that just returns
    the parameter value; this has to do with context switchings, but how can we have
    a decent performance compared to Oracle provided functions?
    Any comments are welcome, specially regarding the performance of UDF in sql
    and for solutions.
    create or replace function f(i in number) return number is
    begin
      return i;
    end;
    declare
      l_start   number;
      l_elapsed number;
      n number;
    begin
      select to_char(sysdate, 'sssssss')
        into l_start
        from dual;
      for i in 1 .. 20 loop
        select max(rownum)
          into n
          from t_tdz12_a0090;
      end loop;
      select to_char(sysdate, 'sssssss') - l_start
        into l_elapsed
        from dual;
      dbms_output.put_line('first: '||l_elapsed);
      select to_char(sysdate, 'sssssss')
        into l_start
        from dual;
      for i in 1 .. 20 loop
        select max(sqrt(rownum))
          into n
          from t_tdz12_a0090;
      end loop;
      select to_char(sysdate, 'sssssss') - l_start
        into l_elapsed
        from dual;
      dbms_output.put_line('second: '||l_elapsed);
      select to_char(sysdate, 'sssssss')
        into l_start
        from dual;
      for i in 1 .. 20 loop
        select max(f(rownum))
          into n
          from t_tdz12_a0090;
      end loop;
      select to_char(sysdate, 'sssssss') - l_start
        into l_elapsed
        from dual;
      dbms_output.put_line('third: '||l_elapsed);
    end;
    Results:
       first: 303
       second: 1051
       third: 1515
    Kind regards
    Taoufik

    I find that inline SQL is bad for performance but
    good to simplify SQL. I keep thinking that it should
    be possible somehow to use a function to improve
    performance but have never seen that happen.inline SQL is only bad for performance if the database design (table structure, indexes etc.) is poor or the way the SQL is written is poor.
    Context switching between SQL and PL/SQL for a User defined function is definitely a way to slow down performance.
    Obviously built-in Oracle functions are going to be quicker than User-defined functions because they are written into the SQL and PL/SQL engines and are optimized for the internals of those engines.
    There are a few things you can do to improve function
    performance, shaving microseconds off execution time.
    Consider using the NOCOPY hints for your parameters
    to use pointers instead of copying values. NOCOPY
    is a hint rather than a directive so it may or may
    not work. Optimize any SQL in the called function.
    Don't do anything in loops that does not have to be
    done inside a loop.Well, yes, but it's even better to keep all processing in SQL where possible and only resort to PL/SQL when absolutely necessary.
    The on-line documentation has suggested that using a
    DETERMINISTIC function can improve performance but I
    have not been able to demonstrate this and there are
    notes in Metalink suggesting that this does not
    happen. My experience is that DETERMINISTIC
    functions always get executed. There's supposed to
    be a feature in 11g that acually caches function
    return values.Deterministic functions will work well if used in conjunction with a function based index. That can improve access times when querying data on the function results.
    You can use DBMS_PROFILER to get run-time statistics
    for each line of your function as it is executed to
    help tune it.Or code it as SQL. ;)

  • How to Developed user defined functions to call function modules in SAP R/3

    •     how to Develope user defined functions to call function modules in SAP R/3 system

    Hello Raja,
    Go through this V.imp Link...
    http://download.oracle.com/docs/cd/B10464_05/integrate.904/b10408/rfc.htm
    Steps to crate FM..
    Follow these steps..
    Go to the T: code SE37
    First You Create Function Group
    On That u specify
    Function Group Name..............
    Short Text..............................
    save...
    Go to SE 37
    Specify the Function Module Name: Eg: Z_Bapi_Materialmaster
    Short Text.......
    Save...
    Next Go to Attributes..
    Select Radio button : Remote enabled model
    Go to Parameters..
    Click Import...
    Give Parameter Type Associate type S.t
    next Click Export...
    Give Parameter Type Associate type S.t
    Next Click Tables Button..
    Specify tables..
    Next click source code button..
    Write Source code here..
    Eg : Select statements Etc..
    Finally we should be select the Radio button Enable remorely
    https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action?pageId=39728
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/bapi%2bstep%2bby%2bstep
    Re: User Defined Functions Tutorials
    Hope this information is useful to you..
    Thanks ,
    Satya Kumar..

  • Multi mapping question using user defined function

    Hi,
    I have a message with multiple occuring nodes (i.e. one message with multiple orders (header + detail)) that I need to map to a idoc. I need to filter out of the source based on order type (in header) from creating an idoc.. How do I do it using user defined function + message mappping ?
    mad

    All - Thanks much.. Here is my requirement that is no solved by regular mapping
    <Root>
    <Recordset>
      <Ordheader>
        <ord>
        <ord_type>
      </Ordheader>
       <Ord_line>
         <ord>
         <Linnum>
       </Ord_line>
      </Recordset>
    <Recordset>
      <Ordheader>
        <ord>
        <ord_type>
      </Ordheader>
       <Ord_line>
         <ord>
         <Linnum>
       </Ord_line>
    </Recordset>
    <Root>
    As you see above, each recordset has order transaction. One Root message can contain multiple of these. So, when I map to the IDOC, I want to filter out any ord_type <> XX.
    If I use regular graphical map, it only looks at first recordset and accepts all or rejects all.
    I need to use UDF. In the UDF, what comes in as input ? Resultset is output -correct ? Now how do I usse graphical mapping with UDF to generate the correct target info

  • How to create user defined functions in xi.

    how to create user defined functions in xi.
    can anyone give info with screen shots.

    Hi,
    Please follow the  steps mentioned in below link
    http://help.sap.com/saphelp_nw04/helpdata/en/f8/2857cbc374da48993c8eb7d3c8c87a/frameset.htm
    also refer below links to know more about UDF
    udf
    Thanks
    Swarup
    Edited by: Swarup Sawant on Mar 3, 2008 3:59 PM

  • How 2 Develope user defined functions to call function modules in R/3 syst

    How to Develope user defined functions to call function modules in SAP R/3 system....in xi

    HIi,
    If those function modules are RFC enabled then we can call those function module from user defined functions. Please see below link
    /people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
    Reward points if helpful.
    Thanks,
    Vijay Kumar T,

  • How to resolve the error while using user defined function.

    EPN Assembly file
    <?xml version="1.0" encoding="UTF-8"?>
    <beans xmlns="http://www.springframework.org/schema/beans"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:osgi="http://www.springframework.org/schema/osgi"
    xmlns:wlevs="http://www.bea.com/ns/wlevs/spring"
    xmlns:jdbc="http://www.oracle.com/ns/ocep/jdbc"
    xmlns:spatial="http://www.oracle.com/ns/ocep/spatial"
    xsi:schemaLocation="
    http://www.springframework.org/schema/beans
    http://www.springframework.org/schema/beans/spring-beans.xsd
    http://www.springframework.org/schema/osgi
    http://www.springframework.org/schema/osgi/spring-osgi.xsd
    http://www.bea.com/ns/wlevs/spring
    http://www.bea.com/ns/wlevs/spring/spring-wlevs-v11_1_1_3.xsd
    http://www.oracle.com/ns/ocep/jdbc
    http://www.oracle.com/ns/ocep/jdbc/ocep-jdbc.xsd
    http://www.oracle.com/ns/ocep/spatial
    http://www.oracle.com/ns/ocep/spatial/ocep-spatial.xsd">
         <wlevs:event-type-repository>
              <wlevs:event-type type-name="TestEvent">
                   <wlevs:class>com.bea.wlevs.event.example.FunctionCEP.TestEvent</wlevs:class>
              </wlevs:event-type>
         </wlevs:event-type-repository>
         <wlevs:adapter id="InputAdapter"
              class="com.bea.wlevs.adapter.example.FunctionCEP.InputAdapter">
              <wlevs:listener ref="inputStream" />
         </wlevs:adapter>
         <wlevs:channel id="inputStream" event-type="TestEvent">
              <wlevs:listener ref="processor" />
         </wlevs:channel>
         <wlevs:processor id="processor">
              <wlevs:listener ref="outputStream" />
              <wlevs:function function-name="sum_fxn" exec-method="execute">
              <bean>com.bea.wlevs.example.FunctionCEP.TestFunction</bean>
              </wlevs:function>
         </wlevs:processor>
         <wlevs:channel id="outputStream" event-type="TestEvent">
              <wlevs:listener ref="bean" />
         </wlevs:channel>
         <bean id="bean" class="com.bea.wlevs.example.FunctionCEP.OutputBean">
         </bean>
    </beans>
    Event class
    package com.bea.wlevs.event.example.FunctionCEP;
    public class TestEvent {
         private int num_1;
         private int num_2;
         private int sum_num;
         public int getSum_num() {
              return sum_num;
         public void setSum_num(int sumNum) {
              sum_num = sumNum;
         public int getNum_1() {
              return num_1;
         public void setNum_1(int num_1) {
              this.num_1 = num_1;
         public int getNum_2() {
              return num_2;
         public void setNum_2(int num_2) {
              this.num_2 = num_2;
    Adapter class
    package com.bea.wlevs.adapter.example.FunctionCEP;
    import com.bea.wlevs.ede.api.RunnableBean;
    import com.bea.wlevs.ede.api.StreamSender;
    import com.bea.wlevs.ede.api.StreamSource;
    import com.bea.wlevs.event.example.FunctionCEP.TestEvent;
    public class InputAdapter implements RunnableBean, StreamSource {
    private StreamSender eventSender;
    public InputAdapter() {
    super();
    public void run() {
         generateMessage();
    private void generateMessage() {
         TestEvent event = new TestEvent();
         event.setNum_1(10);
         event.setNum_2(20);
         eventSender.sendInsertEvent(event);
    public void setEventSender(StreamSender sender) {
    eventSender = sender;
    public synchronized void suspend() {
    Output Bean class
    package com.bea.wlevs.example.FunctionCEP;
    import com.bea.wlevs.ede.api.StreamSink;
    import com.bea.wlevs.event.example.FunctionCEP.TestEvent;
    import com.bea.wlevs.util.Service;
    public class OutputBean implements StreamSink {
         public void onInsertEvent(Object event) {
              System.out.println("In Output Bean");
              TestEvent event1 = new TestEvent();
              System.out.println("Num_1 is :: " + event1.getNum_1());
              System.out.println("Num_2 is :: " +event1.getNum_2());
              System.out.println("Sum of the numbers is :: " +event1.getSum_num());
    Function Class
    package com.bea.wlevs.example.FunctionCEP;
    public class TestFunction {
         public Object execute(int num_1, int num_2)
              return (num_1 + num_2);
    config.xml file
    <?xml version="1.0" encoding="UTF-8"?>
    <wlevs:config xmlns:wlevs="http://www.bea.com/ns/wlevs/config/application"
    xmlns:jdbc="http://www.oracle.com/ns/ocep/config/jdbc">
         <processor>
              <name>processor</name>
                   <rules>
                   <view id="v1" schema="num_1 num_2">
                        <![CDATA[
                             select num_1, num_2 from inputStream     
                        ]]>
                   </view>
                   <view id="v2" schema="num_1 num_2">
                   <![CDATA[
                   select sum_fxn(num_1,num_2), num_2 from inputStream // I am getting error when i am trying to call this function
                   ]]>
                   </view>
                   <query id="q1">
                        <![CDATA[
                             select from v2[now] as num_2*     // Showing error while accessing the view also               ]]>
                   </query>
              </rules>
         </processor>
    </wlevs:config>
    Error I am getting is :
    Invalid statement: "select >>sum_fxn<<(num_1,num_2),age from inputStream"
    Description: Invalid call to function or constructor: sum_fxn
    Cause: Probable causes are: Function name sum_fxn(int,int) provided is invalid, or arguments are of
    the wrong type., or Error while handling member access to complex type. Constructor sum_fxn of type
    sum_fxn not found. or Probable causes are: Function name sum_fxn(int,int) provided is invalid, or
    arguments are of the wrong type., or Error while handling member access to complex type.
    Constructor sum_fxn of type sum_fxn not found.
    Action: Verify function or constructor for complex type exists, is not ambiguous, and has the correct
    number of parameters.
    I have made a user defined function in a java class and configured this function in the EPN assembly file under the processor tag.
    But when i am trying to access the function in the config.xml file , it is giving me an error in the query.
    Please provide urgent help that how to write the exact query.

    Hi,
    In the EPN Assembly file use
    <bean class="com.bea.wlevs.example.FunctionCEP.TestFunction"/>
    instead of
    <bean>com.bea.wlevs.example.FunctionCEP.TestFunction</bean>
    Best Regards,
    Sandeep

  • How to add user defined functions in Menu bar of a Selection Screen?

    Hi,
    Can anybody please suggest me that how can I add user defined functions in the menu bar of a Selection Screen?
    Regards
    [email protected]

    Dear Amit,
    I am referring to the standard SAP program: RIEQUI20.
    On the initial screen, there are 3 tabs.
    Code:
    SELECTION-SCREEN BEGIN OF TABBED BLOCK tab FOR 25 LINES.
    SELECTION-SCREEN TAB (20) tab1 USER-COMMAND ucomm1
                         DEFAULT SCREEN 001.
    SELECTION-SCREEN TAB (20) tab2 USER-COMMAND ucomm2
                         DEFAULT SCREEN 002.
    SELECTION-SCREEN TAB (20) tab3 USER-COMMAND ucomm2
                         DEFAULT SCREEN 003.
    SELECTION-SCREEN END OF BLOCK tab.
    AT SELECTION-SCREEN.
      CLEAR gv_okcode.
      gv_okcode = sy-ucomm.
      CLEAR sy-ucomm.
      CASE gv_okcode.
        WHEN 'IH08'.
          CALL TRANSACTION 'IH08'. "Equipment Selection
        WHEN 'IW29'.
          CALL TRANSACTION 'IW29'. "Notification Selection
        WHEN 'IW39'.
          CALL TRANSACTION 'IW39'. "Order List Selection
        WHEN OTHERS.
      ENDCASE.
    *   Check date:                                         
      IF NOT datuv IS INITIAL                            
      AND NOT datub IS INITIAL.                         
        IF datub >= datuv.                              
        ELSE.                                           
          MESSAGE e884(ih) WITH datuv datub.            
        ENDIF.                                           
      ENDIF.                                             
      IF variant IS INITIAL AND
         dy_vari IS INITIAL.
        PERFORM get_default_variant_f14 USING variant.
      ENDIF.
      PERFORM variant_existence_f14 USING variant.
      IF datuv IS INITIAL.
        datuv = sy-datum.
      ENDIF.
      IF datub IS INITIAL.
        datub = sy-datum.
      ENDIF.
      IF sy-ucomm = 'ADDR'.
        PERFORM adress_sel_f01 USING 'EQUIR'.
      ENDIF.
      PERFORM check_parnr_f76.
    *  AT SELECTION SCREEN OUTPUT
    AT SELECTION-SCREEN OUTPUT.
      STATICS: l_slset TYPE sy-slset.
    *--- Set initial variant
      PERFORM variant_init_f14 USING 'INST' 'INST' 'INST' 'RIEQUI20'.
      IF variant IS INITIAL AND
         dy_vari IS INITIAL AND
        gv_variant_flag IS INITIAL.
        PERFORM get_default_variant_f14 USING variant.
        gv_variant_flag = 'X'.
      ENDIF.
    *--- Set Icon for adress-button
      PERFORM set_icon_f01 USING dy_adrfl ad_icon text-ad0 text-ad1.
    *--- get classification data from select option
    *--- (if new variant or if called via submit or F3)
      IF ( l_slset NE sy-slset ) OR
         ( s_comw[] IS NOT INITIAL AND gt_clsd_comw[] IS INITIAL ).
        l_slset = sy-slset.
        gv_class_old = dy_class.
        gv_klart_old = dy_klart.
        PERFORM copy_selopt_comw_f79 TABLES gt_clsd_comw s_comw.
        PERFORM class_search_init_f77 USING 'EQUI'.
      ENDIF.
    *--- set Icon for classification
      LOOP AT gt_clsd_comw TRANSPORTING NO FIELDS          
                          WHERE atcod > '0'.               
        EXIT.                                              
      ENDLOOP.                                             
      IF sy-subrc IS INITIAL.
        gv_comw_flag = 'X'.
      ELSE.
        CLEAR gv_comw_flag.
      ENDIF.
      PERFORM set_icon_f01 USING gv_comw_flag cl_icon text-cl0 text-cl1.
      CALL METHOD cl_uid_cust=>selection_screen_output.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR variant.
      PERFORM variant_inputhelp_f14 USING variant 'RIEQUI20'.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR dy_parnr.
      PERFORM f4_for_parnr_f76.
    AT SELECTION-SCREEN ON BLOCK clse.
      IF dy_class NE gv_class_old
        OR dy_klart NE gv_klart_old.
        gv_class_old = dy_class.
        gv_klart_old = dy_klart.
        CLEAR gv_comw_flag.
        REFRESH gt_clsd_comw.
        REFRESH s_comw.
      ENDIF.
      PERFORM class_exist_f77 USING dy_klart dy_class 'DY_CLASS'.
      IF sy-ucomm = 'COMW'.
        CALL FUNCTION 'IHCLSD_VALUATION_POPUP'
          EXPORTING
            i_klart               = dy_klart
            i_class               = dy_class
            i_language            = sy-langu
            i_key_date            = sy-datum
            i_also_subclasses     = dy_subcl
          TABLES
            ct_comw               = gt_clsd_comw
          EXCEPTIONS
            exc_no_class          = 1
            exc_klart_not_allowed = 2.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
    *--- fill classification data in select option
        PERFORM copy_comw_selopt_f79 TABLES gt_clsd_comw s_comw.
      ENDIF.
      IF sy-ucomm = 'ONLI'.
        sscrfields-ucomm = sy-ucomm.
      ENDIF.
    Regards
    [email protected]
    Edited by: siemens.a.k on Jan 15, 2010 10:10 AM

  • Error while using user defined function in reports

    Hi,
    When I use the below user defined function in oracle reports I got the wrong number of arguments error
    select test_function(id,a_number,v_date-14,b_number) from dual;
    If I remove -14 from the argument it works. But iIneed to subtract 14 days from the date.
    Thanks for your help.

    select test_function(id,a_number,v_date-14,b_number) from dual;
    you have to give the command like this to_date(v_date,'dd-mon-yyyy')-14
    because the v_Date you choose in the parameter form is not having the corrent date format
    the format dd-mon-yyyy is the format in which v_date is passed by the user.

  • How to migrate User Define Function to another mapping in other namespace

    Hi Everybody
    I have define many User Define Functions in mapping
    How can i use them in other mapping
    Thank you in advance

    Hi,
    I tried to explain the steps.
    1. Take the JAVA code of your User-Defined Functions
    2. Go to a JAVA editor (e.g NWDS, Eclipse, etc...)
    2.1. create a Java project
    2.2. create a Java class
    2.3. inside your Java class, put each JAVA code of your User-Defined Function inside a Method
    2.4. Export your Java class to a JAR file (e.g my_tools.jar)
    3. Go to IR
    3.1 create an Imported Archive (IA) and upload your JAR file.
    3.2 in this IA, you see your Java class which contains all your methods.
    4. inside your mapping,
    4.1 create a User-Defined Function <u>and import</u> your class
    4.2 use your method.
    So, you define in only one place your code (thanks to a IA) and you will be able to use it inside several mappings.
    I hope I don't forget steps...
    Advantage: if tomorrow, you want to create a new function, just add a new method to your Java class and re-import your JAR file
    Oh, I missed: your IA must be created inside a specific Software Component (SC__TOOLS) and this one must be linked with the others by a "Usage dependency", else your IA will be recognise only in one Software Component (and maybe only in one namespace)
    Mickael

  • Error in conditional map using User Defined Function

    All,
    In my mapping I basically have a user defined function that returns the filename of my inbound file from the adapter-specific message attributes (file adapter).  I know this is coded properly because if I simply assign this function to my destination field I can see the filename in the payload XML.
    However if I conditionally check that returned value using if,then,else I get an error message stating:
    "During the application mapping com/sap/xi/tf/_MaterialData2ZcustProdMastMulti_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeException in Message-Mapping transformation"
    Essentially in my if I'm checking if the value returned by my user defined function is equal to the constant "SOMECONSTANT" then I'm setting my destination field to some other constant value.  Otherwise it's equal to a different constant value.
    Any thoughts?

    Claus,
    Thanks for the help.  I actually had figured the problem out on my own.  Sorry for not updating the thread sooner.  What happened was this (as I suspected it wasn't related to my user defined function).  For the newbies out there (of which I'm one) the problem was I was comparing strings in the graphical mapping tool using the Boolean "EQUALS" rather than the Text "EQUALSS".
    Can you give yourself points for solving

  • Getting error while using user-defined function in transform activity

    Hi
    I designed one user-defined function to add 2 nos following the
    link:http://docs.oracle.com/cd/E16764_01/integration.1111/e10224/bp_xslt_mpr.htm .
    Under this i followed the portion creating user-defined function.
    After deploying,i'm getting an error stating:"<summary>
    An error occurs while processing the XPath expression; the expression is ora:doXSLTransformForDoc("xsl/Transformation_1.xsl", $inputVariable.payload).
    </summary>
    <detail>
    XPath expression failed to execute.
    An error occurs while processing the XPath expression; the expression is ora:doXSLTransformForDoc("xsl/Transformation_1.xsl", $inputVariable.payload).
    The XPath expression failed to execute; the reason was: javax.xml.transform.TransformerException: oramds:/deployed-composites/PO/HelloWorld_rev1.0/xsl/Transformation_1.xsl<Line 6, Column 104>: XML-22045: (Error) Extension function error: Class not found '
         Missing class: addition.add
    can anybody help me in this regard     
    Thanks
    Avinash

    Did you copy the jar file of your java classes to MIDDLEWARE_Home/user_projects/domains/soa_domain/lib?
    http://georgie-soablog.blogspot.com/2010/06/soasuite-11g-implement-user-defined.html
    hope this helps

  • Error when use User-Defined Function

    I just create User defined function "getfilename" and I put there:
    "DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
    String ourSourceFileName = conf.get(key);
    return ourSourceFileName; ".
    But In test mapping I have worning:
    "Runtime exception during processing target field mapping /ns1:Z_KBFI_INPUT_FILE/IS_IFILE/FILE_NAME. The message is: Exception:[java.lang.NullPointerException] in class com.sap.xi.tf._KBFIMsgMapping_ method get_fname$[[email protected]] com.sap.aii.mappingtool.tf3.MessageMappingException: Runtime exception during processing target field mapping /ns1:Z_KBFI_INPUT_FILE/IS_IFILE/FILE_NAME. The message is: Exception:[java.lang.NullPointerException] in class com.sap.xi.tf._KBFIMsgMapping_ method get_fname$[[email protected]] at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:284) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:238)...."
    And in RWB in Communication Channel Monitoring I can not see file name in the payload.
    Maby I do something wrong, please tell me.

    my source file 200610.txt is like this:
    HR 0610 061030 061021
    DR 03 C 0610 820114 00010111 0000015000 PLN descr...
    DR 03 D 0610 403201 00010111 0000015000 PLN descr..
    TR 0000000002
    Then in sxmb_moni in inbound message (payload) I have:
    <?xml version="1.0" encoding="utf-8" ?>
    - <ns:KBFIMsgTypeSource xmlns:ns="http://p4.org/xi/KBFI/Interface">
    - <FIRecordset>
    - <HeaderLine>
      <LineKey>HR</LineKey>
      <PostingPeriod>0610</PostingPeriod>
      <PostingEndDate>061030</PostingEndDate>
      <PostingDate>061021</PostingDate>
      </HeaderLine>
    - <PostingLine>
      <LineKey>DR</LineKey>
      <ServerID>03</ServerID>
      <DCFlag>C</DCFlag>
      <PostingPeriod>0610</PostingPeriod>
      <GLAccount>820114</GLAccount>
      <SubAccount>00010111</SubAccount>
      <NetValue>0000015000</NetValue>
      <Currency>PLN</Currency>
      <Description>descr...</Description>
      </PostingLine>
    - <PostingLine>
      <LineKey>DR</LineKey>
      <ServerID>03</ServerID>
      <DCFlag>D</DCFlag>
      <PostingPeriod>0610</PostingPeriod>
      <GLAccount>403201</GLAccount>
      <SubAccount>00010111</SubAccount>
      <NetValue>0000015000</NetValue>
      <Currency>PLN</Currency>
      <Description>descr..</Description>
      </PostingLine>
      </FIRecordset>
      </ns:KBFIMsgTypeSource>
    But I don't have payload for Response (black and white flag).
    In DynamicConfiguration i have:
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Response
      -->
    - <SAP:DynamicConfiguration xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Record namespace="http://sap.com/xi/XI/System/File" name="SourceFileSize">141</SAP:Record>
      <SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileType">txt</SAP:Record>
      <SAP:Record namespace="http://sap.com/xi/XI/System/File" name="SourceFileTimestamp">20061212T121622Z</SAP:Record>
      <SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileEncoding">ISO646-US</SAP:Record>
      <SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">200610.txt</SAP:Record>
      <SAP:Record namespace="http://sap.com/xi/XI/System/File" name="Directory">/usr/sap/PXD/put/archive</SAP:Record>
      </SAP:DynamicConfiguration>

  • How to call User defined functions in Mathscript Node ?

    Hi,
    I have created a user defined function and saved it to Search path of Labview as an M file. If I run my program in Math script window, the function is recognized and the program works properly. If I do the same with MathScript node , the user defined functions are not identified.
    Kindly help me with this problem. Thanks in advance
    Cheers
    Lenord Melvix

    This page may help:
    http://zone.ni.com/reference/en-XX/help/373123C-01/lvtextmathmain/caveats_recommendations_ms_search_...
    Kevin C.

  • Using User Defined Function in BO XI3.1 Universe

    Hi Everyone,
    Is it possible to call a database defined function in a universe?   I would like to create a universe object to call the function then make the object available to users as a dimension when creating reports.  If it's possible, can someone provide the details on how to crease such an object. 
    I'm using BO XI 3.1 and SQL Server 2005.
    Thanks.

    Hi Rudolph,
    What'd be the actual syntax of calling UDF in an object, as per the below info.
    Funtion Name: F1
    Table Name: T1
    Column Name: C1
    Database is SQL Server 2008.
    Appreciate your help.
    Thanks,
    Mahboob Mohammed

Maybe you are looking for

  • Finder not working anymore in Mavericks

    Today i have upgraded my mountain lion to mavericks,when done my mavericks can not see anyfile or driver on the desktop I can not open Finder,anyone can help me to fix it?I wana download mavericks again to re install but my app store can not download

  • Help on cdc and pp

    1) i would like to develop application for pocket pc using cdc and personal profile for pda and i still don't how to begin even after reading the documentations that came with cdc and profile.help me please! 2) is there any IDEs and emulators availab

  • How do I add jpg file extension?

    I recently exported some photos from iPhoto. Some of the photo thumbnail's have normal thumbnails and some only show up as white squares. I searched for these files and they look the same way in the iPhoto Original folder. The files that don't have a

  • Email Account Name Change

    Signed up to BT Infinity in June....before ordering i checked that i would be able to claim back my old btinternet email name that i used to have. The accoutn was dormant nad i wanted to use the same address. I was told it was easy......... However,

  • Address Book–select one contact & copy?

    What's a quick & one-step way to select a contact's name, company and address, copy them, thereby allowing paste into another application or document?


HashFlare