How to use Variable in interface for Mapping in ODI 11g

Hi,
I want to use Variable 'Year' in interface mapping. how i can do that? I define a variable YEAR1 = '2001' and in interface i put #YEAR1 but it didn't work for me. is there any other way?
Example.
I m using 'Year' column in mapping and it is having different 3 constant values so i was think to define 3 variable Year1= '2001' & Year2= '2005' & Year3= '2010'.
In interface i just want to put variable name insted giving fix value.
regards
Sher

Thank u
I m trying with all the options & when i create Variable i and set Default value to ''2001'
'#YEAR'
#YEAR
'#PROJECT_NAME.YEAR'
#PROJECT_NAM.YEAR
#PROJECT_NAME.'YEAR'
and setting to Stagging Area
But still it is not working out.
I m suing ODI11.1.1.3
is it any issue?

Similar Messages

CcBPM - How to use 1 Message Interface for 2 different Business System

Hi,
I have this bpm scenario below :
JDBC QUERY (ASYN) ---> RFC (SYNC) -
> JDBC INSERT (ASYN) -
> MAIL (ASYN).
So Both JDBC INSERT and MAIL using the same data input from RFC response for instance i will named as MI_RFC_RES_ASYN_ABS. I have problem to configure in the integration directory, how make the xi smart enough to routing in the correct business system.
JDBC -
> BS_JDBC and MAIL -
> BS_MAIL base on the send step in BPM because the interface is the same.
Cheers
Fernand

Hi,
If you want to send the same mesg to diff systems and also need to have the control on seq,
then define 2 diff abstract interfaces for messages going out of BPM (with same message type so that structure is same).
One will be used to define send step for JDBC and other for BPM.
Define 2 send steps in BPM one for JDBC and other for mail using these abstract interfaces.
Now you will have 2 receiver determinations.
Since recr is determined based on sender system interface name and name space,
system name ( BPM ) and name space will be same for both the messages going out of BPM.
for JDBC abstract interface BS_JDBC will be recvr.
and for Mail abstract interface BS_MAIL will be your receiver.
hope it answers your qn.
Regards
Pushkar

How to using variable in log file name on ODI 10.1.3.5?

Hi,
how can i put a my variable into my log file name?
now I use this syntax --> ExRate_<%=odiRef.getSysDate("MMddyyHHmm")%>.log.
But I have a variable for example #server, the value = "oracleProd" and i want to put the variable value into my log file name.
so the result that i want to get is --> ExRate_oracleProd_<%=odiRef.getSysDate("MMddyyHHmm")%>.log
so how can I apply the variable value to my log file name? I try using odiRef.getSessionVarList(#Month) but it didn't work.
Thanks.
Regards,
chris
Edited by: 877142 on Aug 3, 2011 9:36 PM

hi,
You can by
ExRate-#server-<%=odiRef.getSysDate("MMddyyHHmm")%>.log
Note that I have changed the underscores to dashes. This is because ODI will assume that this is a wildcard/escape character.
Hope this helps!!
Bos

How to use the different class for each screen as well as function.

Hi Experts,
How to use the different class for each screen as well as function.
With BestRegards,
M.Thippa Reddy.

Hi ThippaReddy,
see this sample code
Public Class ClsMenInBlack
#Region "Declarations"
    'Class objects
    'UI and Di objects
    Dim objForm As SAPbouiCOM.Form
    'Variables
    Dim strQuery As String
#End Region
#Region "Methods"
    Private Function GeRate() As Double
            Return Double
    End Function
#End Region
Public Sub SBO_Appln_MenuEvent(ByRef pVal As SAPbouiCOM.MenuEvent, ByRef BubbleEvent As Boolean)
        If pVal.BeforeAction = True Then
            If pVal.MenuUID = "ENV_Menu_MIB" Then
            End If
        Else ' Before Action False
            End If
    End Sub
#End Region
End Class
End Class
Rgds
Micheal
Vasu Anna Regional Feeling a???? Just Kidding
Edited by: micheal willis on Jul 27, 2009 5:49 PM
Edited by: micheal willis on Jul 27, 2009 5:50 PM

SRP547W, How to use multiple WAN IPs for port forwarding?

Hi folks,
We've run into some difficulty trying to take advantage of multiple WAN IPs in conjunction with the SRP547, and I'm hoping someone here can help out or at least tell us that we're going to need to buy a different router...
What we're trying to acheive is the ability to port forward from our distinct public IPs to different internal servers. Looking at the options under Port Forwarding it looks like we can only configure forwards at the "WAN interface" level, but our problem is that we can't work out how to set up separate interfaces for each of our Public IPs...
Our ISP provides us with a fully managed NTU/router with a single "Internet" ethernet port, which we can use by statically configuring IPs on our end. For this configuration this port has been directly patched to the WAN ethernet port on the SRP547W.
We have been allocated a 255.255.255.248 (/29) subnet, giving us 5 usable IPs after the ISP's gateway address is taken into account, like so:
a.b.c.208     Network Address (/29 subnet)
a.b.c.209     ISP Gateway
a.b.c.210     IP1
a.b.c.211     IP2
a.b.c.212     IP3
a.b.c.213     IP4
a.b.c.214     IP5
a.b.c.215     Broadcast Address
On the SRP we've set up the default "Ethernet WAN2" sub-interface with the following details for IP1
VLAN ID:               4088 (Uneditable)
Connection Type:       Static IP
Internet IP Address:   a.b.c.210
Subnet Mask:           255.255.255.248
Default Gateway:       a.b.c.209
The next step (I would have thought) would be to add a second sub-interface, using similar info for IP2
VLAN ID:               4000 (Chosen arbitrarily)
Connection Type:       Static IP
Internet IP Address:   a.b.c.211
Subnet Mask:           255.255.255.248
Default Gateway:       a.b.c.209
When we try to do so however we get:
Fail!
Conflict with Ether_WAN2 interface address type
I should mention at this point that we're running on firmware version 1.02.01 (023).
Any suggestions on how we can proceed?
Is there a CLI or other method of configuration that might work if the web interface won't?
Thanks,
Tim.

OK, I've seen reference to this solution before but not much in the way of details. Perhaps you can spell out how this ought to work, as the Software DMZ doesn't behave as I'd expected it to.
As before, on the SRP we've set up the default "Ethernet WAN2" sub-interface with the details for IP1 with a /29 subnet.
VLAN ID:               4088 (Uneditable)
Connection Type:       Static IP
Internet IP Address:   a.b.c.210
Subnet Mask:           255.255.255.248
Default Gateway:       a.b.c.209
We'd now like to expose a server function on IP2, let's say LAN details for this server are:
VLAN:                  3000
VLAN IP Range:         192.168.1.1/24
Server IP:             192.168.1.10
Server Port:           80
So first we turn on Software DMZ:
Status:                Enabled
Public IP:             a.b.c.211
Private IP:            192.168.1.10
WAN Interface:         Ether_WAN2
My understanding, based on what you've said, is that this should expose the whole server to external access via IP2. Unfortunately, it doesn't seem to work this way - we don't seem to have any access at all. Perhaps there's a default deny rule on the firewall?
Just to be sure, I tried creating a rule to allow HTTP traffic to the server in the Advanced Firewall page.
In Interface (WAN):    All
Out Interface (LAN):   VLAN.3000
Source IP:             0.0.0.0
Source Subnet:         0.0.0.0
Destination IP:        192.168.1.10
Destination Subnet:    255.255.255.255
Protocol:              TCP
Source Port:           Any
Destination Port:      Single:80
Action:                Permit
Schedule:              Everyday
Times:                 24 Hours
Still no dice. What am I missing?
Cheers,
Tim.

Using one Message Interface for all mappings

Hi Folks,
I am using a BPM in which i m getting a file from file system which have system ID in it.
I am having three send Synchronous step following that.
What i need is to use the Message interface for file to be used for receiver determination based on system id in case of Synchronous interfaces.
DO i need to include this File msg. interface in each mapping, if i do so will it be possible to send req. and get response for synchronous call.
OR is there any way to to use the file msg. interface for each mapping.
we are on SP17,I also tried Extended mapping but i am having SYNCHRONOUS send steps.
Plz help me out
Sachin

Bhavesh
<i>1. You receiver a file in your BPM . This has a field called SYSTEM ID?
2. On the basis of the System ID field you need to determine the Receiver to which the Synchronous Request message has to be sent?</i>
Sorry for that...because I was confused with jai's ans.. that's why said like that
<b>You are absolutely correct</b>
This is what i want to do.
i can't use switch step here. my BPM looks like this
RecFile->sync send->transformation1->transformation2->sync send2->transformation3->BLOCK
in BLOCK
Sync Send3->transformation4 and so on...
I am using three different Sync ABS Interface for each Sync send steps.
In receiver determination i want to get the data from respective R/3 system based on system ID i.e. logical system in File MI.
Say if it T90CLNT90 then get data from BS_SAPR3_4.6 else from BS_4.7
Sachin
Message was edited by:
Sachin Dhingra

How to use @variable(bouser) in Universe to get BOE userid in Xcelsius

Dear Expert,
I have request that need to display BOE userid to displayed in Dashboard using Xcelsius,
after searching in Internet, i found that it can be done by using @variable(bouser) in an object in the Universe, and use the object in Qaaws, but i don't how to use it.
already tried insert /* @variable('BOUSER') */ in END_SQL universe parameter, but still no luck.
my question is :
how to use @variable(bouser) in universe? and then my Xcelsius can display the BOE userid?
thanks in advance for any answer.
I Using SAP Integration KIT to create universe from Query BEX
Luqman
Edited by: luqman hakim on Jun 29, 2010 4:03 PM

>
Didier Mazoue wrote:
> Hi,
>
> You are mentioning that you are using SAP Integration Kit.
> Does it mean that the source you are targeting is SAP BW?
>
> If it is the case, this is unfortunately not supported.
> SAP BW MDX does not support calculated expressions that return string or date: this is a limitation of SAP BW engine.
> This is one of the reason why a lot of user exit are used to address these needs.
>
> Regards
> Didier
Didier Mazoue
yes, my Data source is SAP BW, and connected to BOE via SAP INT KIT.
It's too bad that SAP doesn't support so simple requirement.
you said : user exit
are used to address these needs.
so there are possibility to solve my problem.
would you give me the logic of user exit? which part I should create the user exit
I'm quiet familiar with user exit in BW
thanks

How to use variable in topology

Hi every one..
how to use variable in topology

The normal way you use in interface or procedure. But the package you are executing should have the variable in 1st step with set or refresh mode.

How to use one email adress for multiple recipients

Hello,
I'd like to know how to use one email adress for multiple recipients.
this would be very useful or projects. for example;
if i send one mail to [email protected], all people in this project get an email.
I will add the people in this project myself.
I know it is possible, but I don't know how to do it ;-)
please help me!

Hope this help.
_http://technet.microsoft.com/en-us/library/cc164331(v=exchg.65) .aspx

How to Use the same iview for both KM End User and the KM Administrator

Hi friends,
*This is my scenario :* How to Use the same iview for both KM End User and the KM Administrator but with different Context
Menu Options.
i followed these steps but im getting same context menu for both KM End User and the KM Administrator .
Assign the role Content Administrator to the user km_admin. This is needed so that km_admin can change
the presentation settings for the KM Folder u201EReports_kmFolder‟.
Now, login with user km_admin. Navigate to the Km Folder reports_kmFolder through Content Administration
-> Km Content. Click on Details link of the folder reports_kmFolder.
Go To Settings -> Presentation. Click on the tab u201ESettings for You‟-> Click on button u201ESelect Profile‟.
Select the radio button corresponding to u201Elayout Set‟, and choose u201EConsumerExplorer‟ from the dropdown.
Click u201EOK‟.
Select both the check boxes corresponding to Items Affected as shown above, and click u201ESave‟
Now, remove the u201ESuper Administrator‟ role from the user km_admin and login with this user.
How rto resolve this????
Regards,
Prasad.

Hello Prasad,
Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
Regards,
Lorcan.

How to use multiple VCI strings for lap 1300 and 1200 (option 60) in one pool?

Hi All,
Hope to you a very happy new year,
I have two differnt LAP 1300 and 1200 in my network and I need to add theme to the WLC,
I successed to add one of theme by the option 60 in the DHCP pool at the Core SW,
So my quetion is below:
How to use multiple VCI strings for lap 1300 and 1200 (option 60) in one pool?
Thanks in Advanced,
Ahmed,

To add to Scott's post. Option 60 would be useful if you needed to put certain types of AP on specific controllers. Otherwise, no real need to use it for the most part.
Though, I do recall an issue a few years ago that some windows machines had issues getting DHCP if option 43 is being returned.
Now, on an IOS switch, you can only configure one option 60 per DHCP scope
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered

How to use Add Query Criteria for the MySQL data Base in Netbeans ?

How to use Add Query Criteria for the MySQL data Base in Netbeans Visual web pack.
When the Query Criteria is add like
SELECT ALL counselors.counselors_id, counselors.first_name, counselors.telephone,counselors.email
FROM counselors WHERE counselors.counselors_id = ?
when i run this Query in the Query Window
i get a error message Box saying
Query Processing Error Parameter metadata not available for the given statement
if i run the Query with out Query Criteria its working fine.

*I am glad I am not the only one who have this problem. Part of issue has been described as above, there are something more in my case.
Whenever I try to call ****_tabRowSet.setObject(1, userDropList.getSeleted()); I got error message as shown below:*
The Java codes are:
public void dropDown1_processValueChange(ValueChangeEvent event) {
Object s = this.dropDown1.getSelected();
try {
this.User_tabDataProvider1.setCursorRow(this.User_tabDataProvider1.findFirst("User_Tab.User_ID", s));
this.getSessionBean1().getTrip_tabRowSet1().setObject(1, s);
this.Trip_tabDataProvider1.refresh();
} catch (Exception e) {
this.log("Error: ", e);
this.error("Error: Cannot select user"+e.getMessage());
SQL statement for Trip_tabRowSet:
SELECT ALL Trip_Tab.Trip_Date,
Trip_Tab.User_ID,
Trip_Tab.Destination
FROM Trip_Tab
WHERE Trip_Tab.User_ID = ?
Error messages are shown below:
phase(RENDER_RESPONSE 6,com.sun.faces.context.FacesContextImpl@5abf3f) threw exception: com.sun.rave.web.ui.appbase.ApplicationException: java.sql.SQLException: No value specified for parameter 1 java.sql.SQLException: No value specified for parameter 1
com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.cleanup(ViewHandlerImpl.java:559)
com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.afterPhase(ViewHandlerImpl.java:435)
com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:274)
com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
com.sun.webui.jsf.util.UploadFilter.doFilter(UploadFilter.java:240)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:276)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
tandardWrapperValve[Faces Servlet]: Servlet.service() for servlet Faces Servlet threw exception
java.sql.SQLException: No value specified for parameter 1
at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:910)
at com.mysql.jdbc.PreparedStatement.fillSendPacket(PreparedStatement.java:1674)
at com.mysql.jdbc.PreparedStatement.fillSendPacket(PreparedStatement.java:1622)
at com.mysql.jdbc.PreparedStatement.executeQuery(PreparedStatement.java:1332)
at com.sun.sql.rowset.internal.CachedRowSetXReader.readData(CachedRowSetXReader.java:193)
at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:979)
at com.sun.sql.rowset.CachedRowSetXImpl.execute(CachedRowSetXImpl.java:1439)
at com.sun.data.provider.impl.CachedRowSetDataProvider.checkExecute(CachedRowSetDataProvider.java:1274)
at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorRow(CachedRowSetDataProvider.java:335)
at com.sun.data.provider.impl.CachedRowSetDataProvider.setCursorIndex(CachedRowSetDataProvider.java:306)
at com.sun.data.provider.impl.CachedRowSetDataProvider.getRowCount(CachedRowSetDataProvider.java:639)
at com.sun.webui.jsf.component.TableRowGroup.getRowKeys(TableRowGroup.java:1236)
at com.sun.webui.jsf.component.TableRowGroup.getFilteredRowKeys(TableRowGroup.java:820)
at com.sun.webui.jsf.component.TableRowGroup.getRowCount(TableRowGroup.java:1179)
at com.sun.webui.jsf.component.Table.getRowCount(Table.java:831)
at com.sun.webui.jsf.renderkit.html.TableRenderer.renderTitle(TableRenderer.java:420)
at com.sun.webui.jsf.renderkit.html.TableRenderer.encodeBegin(TableRenderer.java:143)
at javax.faces.component.UIComponentBase.encodeBegin(UIComponentBase.java:810)
at com.sun.webui.jsf.component.Table.encodeBegin(Table.java:1280)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:881)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:889)
at com.sun.faces.application.ViewHandlerImpl.doRenderView(ViewHandlerImpl.java:271)
at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:182)
at com.sun.rave.web.ui.appbase.faces.ViewHandlerImpl.renderView(ViewHandlerImpl.java:285)
at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:133)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:244)
at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at com.sun.webui.jsf.util.UploadFilter.doFilter(UploadFilter.java:240)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:216)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:184)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:276)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
Also when I tried to update my MYSQL connector / J driver to version 5.1.5 from 5.0.5 (NB 5.5.1) and 5.0.7 (NB 6.1), I could not get it work (looooong time to search some JDBC classes and with no response in the end) on both of my Netbean 5.5.1(on PC) and Netbean 6.1(on laptop) IDEs.
Could anybody look into this issue.
Many thanks
Edited by: linqing on Nov 22, 2007 4:48 AM

How to use the second display for installation OS in my vertical lines iMac

My 17" iMac display is full of vertical lines, it is unuseable. Does anyone know how to use the second display for Mac OS X or disable the first display for installation Mac OS x ?

Go to: *System Preferences > Displays* and select the Arrangement tab, then relocate your Menu bar by dragging it to the other display.
Unfortunately there is no Hardware or Software switch to turn off the iMac's Internal Display.

How to Use the language function for assignment and validation

Hi All,
If anyone can explain me in details with example ,how to use the language function for assignments and validations?
Thanks
Arnab

Hi Arnab,
The expression is checked only for the current MDM session.
If u login with the ABC language it will always show the ABC language no matter how many times u execute it.
Try connecting to the DM with the XYZ language.
It should go to the if part rather than else.
Hope it helps.
Thanks,
Minaz

How to use the index method for pathpoints object in illustrator through javascripts

hii...
am using Illustrator CS2 using javascripts...
how to use the index method for pathpoints object in illustrator through javascripts..

Hi, what are you trying to do with path points?
CarlosCanto

How to use Variable in interface for Mapping in ODI 11g

Similar Messages

Maybe you are looking for