How to use web service with ABAP Web Dynpro

Hi.
     do you know, how to web service with ABAP Web Dynpro?

Hi,
If you have a webservice ready with you then you can generate a proxy from SE80 and you can use that. You just have to create a port and assign to that generated proxy(CLASS) and you are good to go.
Let me know if you need more information.
Thank You,
Gajendra.

Similar Messages

  • How to use web dynpro's web service to import XML file

    Hi
    I have an xml file and I want to use a web dynpro's web service to cosume this file which is existing on my local drive. Can anyone help me which steps I have to do to use this file as a web service using web dynpro.
    Thanks

    Hi
    You can refer below Wiki Article on SDN. I hope that will help you out.
    [https://www.sdn.sap.com/irj/sdn/wiki?path=/display/emtech/consuming%2babap%2bweb%2bservices%2busing%2bflex]
    Thanks.

  • How to use Web Dynpro Java isChanged and isChangedByClient

    Hello,
    I have read thorugh a lot of documentation, threads, ... --> but the picture is not geting clearer fro me.
    We have Web Dynpro Java Application (on Netweaver 7.0 SP12) running in Enterprise Portal. We need to tell the portal work protect mode, that we have unsaved changes (how to do this is clear).
    I am struggling with figuring out, that my Web Dynpro Context has unsaved changes. I found the two change-indicators isChanged() and isChangedByClient(), which already confuses me a little bit.
    Anyway, this is what I have figured out so far:
    I am calling wdContext.currentContextElement().isChangedByClient() to figure out changes and when a Save operation has been completed sucessfully, I call wdContext.currentContextElement().node().getContext().resetChangedByClient(). This works for some of the changes made by the user.
    I then tried calling wdContext.nodeABC().getElementAt(i).isChanged() for all nodes of my Web Dynpro Context, but this results in detecting changes before the user ha done any interaction.
    Implementing an own change tracking (i.e. by adding a changed-Attribute to each context node) does not seem a viable option for me.
    So these are my questions:
    - Does anyone now a working pattern relying on those chnage indicators ?
    - Does anyone now how to reset the isChanged indicator (or when it is resetted by the framework) ?
    Any help appreciated.
    Thank you,
    Stefan

    Hi
    Check this link
    Re: How to keep isChangedbyClient flag set between roundtrips?
    http://help.sap.com/javadocs/NW04/current/wd/com/sap/tc/webdynpro/progmodel/api/IWDNodeElement.html
    Thanks

  • How to use Web dynpro DC to use another Web dynpro DC?

    First,I created a Web dynpro DC,and make the component to public .
    Then,I created another Web dynpro DC,Add the first DC in Used DCs,But in this Web dynpro, I can't use first Web dynpro Method,can anyone tell me how to do it?

    Go for below document.
    [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60132577-7801-2b10-c9b1-b13b2f78f23b?QuickLink=index&overridelayout=true]
    This explains interaction between two components of same DC.
    Now, since you need 2 DC.
    Then follow below steps in addition to above document.
    1. Create DC1 and Dc2
    2. Add dependency from DC1 to DC2. (Used DC Component).
    If you find any further issues then please revert back.
    Thanks

  • How to use TeleCheck service with coldfusion page

    hi,
    I m new to coldfusion want to use TeleCheck service on
    coldfusion page.
    can any one provide me technical support in this regards with
    thanks
    Shane

    Just google it. You will find lots of examples. Here are some :
    [http://java.sun.com/docs/books/tutorial/jdbc/basics/sql.html|http://java.sun.com/docs/books/tutorial/jdbc/basics/sql.html]
    [http://onjava.com/pub/a/onjava/2003/08/13/stored_procedures.html|http://onjava.com/pub/a/onjava/2003/08/13/stored_procedures.html]

  • How to use singleinstance service with a JWS application

    Hello,
    I have a Swing application and i am using Java web start to deploy on the user machines.
    I want to know how to implement the single instance service. so that only one instance os the application is running.
    Where should i use the singleinstance class provided by JNLP api.
    for ex:
    package test;
    import java.awt.BorderLayout;
    import javax.swing.JFrame;
    import javax.swing.JOptionPane;
    import javax.swing.JPanel;
    import javax.swing.JScrollPane;
    import javax.swing.JTextArea;
    import javax.swing.border.EmptyBorder;
    import java.util.Date;
    // classes of the web-start API, used in this example.
    import javax.jnlp.SingleInstanceListener;
    import javax.jnlp.SingleInstanceService;
    import javax.jnlp.ServiceManager;
    import javax.jnlp.UnavailableServiceException;
    /** A test of the SingleInstanceService using the web-start API.
    @author Andrew Thompson
    @version 2007/1/8
    public class SingleInstanceApplication
    extends JFrame
    implements SingleInstanceListener {
    /** A simple editing area. */
    JTextArea document;
    /** Assemble the GUI. */
    SingleInstanceApplication() {
    super("JNLP API single instance service");
    try {
    SingleInstanceService singleInstanceService =
    (SingleInstanceService)ServiceManager.
    lookup("javax.jnlp.SingleInstanceService");
    // add the listener to this application!
    singleInstanceService.addSingleInstanceListener(
    (SingleInstanceListener)this );
    } catch(UnavailableServiceException use) {
    use.printStackTrace();
    System.exit(-1);
    setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    document = new JTextArea(
    "Try openning another version of this application\n");
    document.setEditable(false);
    JPanel main = new JPanel(new BorderLayout());
    main.add(new JScrollPane(document));
    main.setBorder( new EmptyBorder(8,8,8,8) );
    getContentPane().add(main);
    pack();
    setSize(400,300);
    setLocationRelativeTo(null);
    /** Specified by the SingleInstanceListener interface
    @param args The command line parameters used for this invocation */
    public void newActivation(String[] args) {
    StringBuffer sb = new StringBuffer();
    for (int ii=0; ii<args.length; ii++) {
    sb.append("'" + args[ii] + "' ");
    String message = "Got new args: " + sb.toString();
    // this usually serves to alert the user the app.
    // wants attention. On Win. it will flash the
    // apps. icon in the task bar.
    JOptionPane.showMessageDialog(this, message);
    // also add the new args and time to the document.
    document.append( new Date() + "\t" + message + "\n" );
    /** Construct the GUI and display it. If the user double clicked
    a file to start the application, begin measures to load that file. */
    public static void main(String[] args) {
    SingleInstanceApplication app =
    new SingleInstanceApplication();
    app.setVisible(true);
    in my progrma there are many clasess where should i use this.
    Pls help new bie!!
    Thanks and Regards

    To work for your project, the SIS has to be implemented on the class that is the main(). To implement the SIS for a class, it needs to declare it implements the SingleInstanceListener and define the new activation method. Also, it needs to have the SingleInstanceService added to it via. the methods addSingleInstanceListener(). It is not strictly necessary to call addSingleInstanceListener() from the main() class, but it does make a lot of sense.
    Does that answer your question?
    Edited by: AndrewThompson64 on Dec 15, 2007 1:28 AM
    Edited by: AndrewThompson64 on Dec 15, 2007 1:48 AM

  • How to use LDB PNP with ABAP objects in a program

    Hello,
    I am wondering if anybody has used the HR logical database(LDB) PNP with user defined ABAP objects in a program? I am using the FM- <b>LDB_PROCESS</b> but its not working. Also assigning PNP in the attributes section of the program -- so that I can use predefined fields from the LDB and then invoking the FM doesn't work -- throwing 'Logical database already active' error.
    I suppose even with the ABAP objects and the new FM -- I should still be able to utilize the pre-defined fields of the PNP database -- and also the built in authorizations. I cannot use GET PERNR and REJECT as they give errors. I understand that the use of HR-macros (RP-PROVIDE-FROM-LAST and et al.) are not allowed as they use the table work area -- which is not allowed in ABAP-OOPS.
    I would really appreciate if anyone could show me some insight regarding this. Thank you.
    Kshitij R. Devre

    Hi Kshitij
    It would be really good if we could use both together. But as I know, it is not possible. "GET pernr." is an event-like loop statement and so cannot be used in OO context. And I guess, the same restriction holds for the "LDB_PROCESS" since it uses LDB-specific processing.
    What I suggest you is to use standard and BAPI functions.
    Sorry for giving bad news...
    *--Serdar

  • How to integrate Web Dynpro Java 7.1 with EP 7.0?

    Hi,
    I have 2 servers: 1 is EP 7.0 and another is CE 7.1. Is there any way how to use Web Dynpro Java deployed in CE 7.1 as an iView in EP 7.0 other than portal federation? We cannot use the portal content producer-consumer concept. Is there any other way how to do that?
    Regards,
    Tomas

    I have same task.
    I did not understood how and which system you created to resolve problem?
    As well, any reference  would be very helpful.
    thanks
    Edited by: Ivan Ivanov on Sep 7, 2009 5:51 PM

  • How i use Enterprise Services?

    Hello @ll experts,
    i hope that is the right Forum-Category.
    I don't find any description, how is use Enterprise Services with SAP PI for my IT-Scenario.
    Actual situation:
    I import the XI-Content (there is the Service Interface to use for the ES) in the Enterprise Service Repository (SAP PI 7.1), copied the Service Interfaces and all dependence Objects in my own Software-Compoment.
    My Question:
    What i should doing to config in my sap ERP ECC 6.0 with the Enterprise Service to connect with SAP PI 7.1?
    Maybe ABAP-Proxies?
    Thanks in Advance,
    best regards
    armin

    Hello,
    Once you build Service Interface in PI, you need to generate PROXY in back end ERP system using SPROXY. After that you need to implement the Proxy Class Method by writing glue code using SE80. Now, you may setup End Point using SOAMANAGER. Please see the link for details: [http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/60cb2b4c-af72-2b10-a3a2-a2f718d2a565]
    Thanks,
    Venu

  • How to save file in km using web dynpro abap

    Hi Experts,
    We have a requirement that file should be saved in a folder in km, the name of the folder should be the employee number.
    Could you please tell me how to create folder with employee number in KM and store file in it using web dynpro abap.
    Thanks and Regards,
    Santhoshi.

    Thanks Naga Raju Meesala.
    How come all these methods are deprecated...getEP5User
    Also, since I am building a weddynpro DC, what is the proper way to include these jar files as Used DCs?
    Now proceed in the same way with the variable PORTAL_HOME and add the following .jar files:
    u2022 \lib\prtapi.jar The portal runtime APIs
    u2022 \portalapps\com.sap.portal.usermanagement\lib\com.sap.security.api.ep5.jar The user management APIs of the Enterprise Portal 5.0 are deprecated, but still in use in SAP NetWeaver 04
    u2022 \portalapps\com.sap.netweaver.bc.rf\lib\bc.rf.framework_api.jar KM Repository Framework APIs
    u2022 \portalapps\com.sap.netweaver.bc.rf.service\lib\bc.rf.global.service.urlgenerator_api.jar Repository Framework Utility: URL Generator
    u2022 \portalapps\com.sap.netweaver.bc.sf\lib\bc.sf.framework_api.jar Repository Framework: Repository Services
    u2022 \portalapps\com.sap.netweaver.bc.util\lib\bc.util.public_api.jar Repository Framework Utilities

  • How to use web services in Excelsius 2008

    I am new  to this tool. I have trial version on excelsius 2008 and i would like to build a dashboard that should query our corporate database (in oracle). I think web services is a option to do it.  Any samples available?.Please help me
    Edited by: AshishDatar on Jul 27, 2009 6:29 PM

    Hi AshishDatar:
        For you question you want to get data from data base using web service connection. Here I can give you some suggestions
    1.Write a web service to retrieve data from data base, then use Xcelsius u201Cweb service connectionu201D under u201CManage Connectionu201D section to consume the service and get the data from data base to spread sheet.
    2.Xcelsius also provide you a tool to generate web service with easy way (without coding). (Suggested)
    Using flynet, you can get flynet installation file under Xcelsius installation folder u201CXcelsius\Connectivity\Flynet Webservice Generatoru201D for more information about flynet please refer to
    http://myxcelsius.com/2008/11/07/generating-web-services-for-xcelsius-using-flynet-web-service-generator/
    Here is also a demo on how to use  web service conneciton with Xcelsius + Flynet
    https://businessobjects.webex.com/ec0600l/eventcenter/enroll/register.do?siteurl=businessobjects&formId=50213992&confId=50213992&formType=1&loadFlag=1&eventType=1&accessType=
    Hope it helps with your work! And let me know if you need any further help.
    Thanks!
    Bill
    Edited by: Bill Xu on Jul 28, 2009 8:02 AM

  • How to display the data of CJ2C(T-CODE) using web dynpro abap

    Hi all:
        How to display the data of CJ2C(T-CODE) using web dynpro abap.
        CJ2C used to display a Gantt Chart.
        Thanks.

    Hi,
    Create a Value attribute (resource) of type Resource, bind it with the property of File Upload UI element.
    On action place the code and Deploy the application
    byte[] bytes = new byte[ 1024];
    FileOutputStream out = new FileOutputStream( new File( <path in server>));
    InputStream in = resource.read( true);
    int len;
    while( ( len = in.read( bytes)) > 0)
         out.write( bytes, 0, len);
    in.close();
    out.close();
    Regards
         Vinod V

  • How to use Web services in BI 7?

    HI all,
    Can anyone pls let me know how to use Web services in BI
    Thanks
    Pooja

    http://help.sap.com/saphelp_nw04/helpdata/en/9b/dad1ae3908ee44a5caf57e10918be9/content.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/2d/64d029e74911d6b2e400508b6b8a93/content.htm

  • How to use maven project with fusion web application

    hi i have seen the tutoriel of oracle on how to use maven 2 with jdevelopper ,
    but how to integrate it on a fusion web application ???
    Edited by: 922454 on 9 avr. 2012 04:39

    If you have not managed to help yourself out with maven for ADF here is a quick workaround you can try. Invoke ant's ojdeploy task from maven. Refer step-by-step guide here.
    http://maveninjdeveloper.blogspot.in/2012/04/handle-adf-application-maven-ant.html

  • How to use web service consumer as a source to connect to Salesforce?

    I see a lot of articles and mapping xmls on how to use web service consumer but as a newbie I am not able to view the object schema from my salesforce enterprise WSDL after importing it in Informatica designer as a source. My enterprise wsdl has operations like create, retrieve, upsert, delete etc so if I want to read data from account then could someone guide me on how to use the web service consumer to view the fields after importing the wsdl.  After importing the wsdl and selecting the operation say create, the columns (ports) displayed shows different groups but it doesn't list the object fields? what am I missing here? And what is the operation to read data from Salesforce is it "retrieve" from the entripse wsdl? As a newbie on this, I appreciate any inputs on this topic.

    Magazinweg 7Taucherstraße 10Taucherstraße 10Av. Copacabana, 267Strada Provinciale 124Fauntleroy CircusAv. dos Lusíadas, 23Rua da Panificadora, 12Av. Inês de Castro, 414Avda. Azteca 123 I have the source table like this and i want to replace the character and sum up the numbers and how can i do it, I replace the character by reg_replace() function but I am not able to add the number because it is of not fixed length. My Output should be,71115705396

Maybe you are looking for