How to use web services with Dynamic url behaviour

Hi,
IView created by me currently uses some web services whose url behavior is static but i want to give a dynamic url behavior. i.e. i want to use the url which user provides. So here are my questions
1. How I shall assign the url supplied by the user to IView?
2. If I want to set some config variables during runtimes how I shall do it?
Thanks in advance,
Vishvesh

Hi,
1. I'm guessing you mean the webservice's url the user provides is pointing to an identical webservice to what you used to create your proxy... otherwise I think it will be very hard to do (I can imagine creating the proxies using the wsdl tool in run time or using code dome.. but that can't be what you want, right?).
So if what you wanted is to use the same web service with a different url, then the web service's proxy class you created has API for doing this in code! (it inherits it)
2. you can't, simply since the portal application doesn't ever use the config file... it isn't even deployed to the portal... so dynamic properties are "out of the question" here, sorry... see 1 again
Regards,
Ofer

Similar Messages

How to use web service with ABAP Web Dynpro

Hi.
do you know, how to web service with ABAP Web Dynpro?

Hi,
If you have a webservice ready with you then you can generate a proxy from SE80 and you can use that. You just have to create a port and assign to that generated proxy(CLASS) and you are good to go.
Let me know if you need more information.
Thank You,
Gajendra.

Web Service With Dynamic URL (Very Basic Conceptual Question)

Hi everyone,
I would like to employ JAX-WS to generate and publish a web service along with a web-based client which uses the service. The problem is: I want to deliver both the server (with its service) and the client to a customer, who will install the server on an internal machine, and who will have to configure the client to look for the web service at the IP of that internal machine, ideally by just putting the IP into some configuration setting. Both the services' path (on the server) as well as the services remain constant.
From everything I have found so far, it appears as if one fixes the service's IP during compilation, i.e., when generating the WSDL and stubs using wsgen/wsimport. I guess that's fine when the server remains with me & a fixed IP, but doesn't this approach break down as soon as you need some flexibility in the server's IP, as, e.g., in my above scenario? I guess I am missing something, but unfortunately all the documentation I have found so far either neglects this issue or comes up with rather complex solutions indeed. - Or would one not use SOAP+WSDL in the above scenario in the first place? Any other best practices?
I'd very grateful for any hints,
Cheers
equitone
Message was edited by:
Equitone

Hi,
thanks for your reply. Of course, I agree I could alter the generated code, but, as you say, I would not want to do that, since it will make automatic builds and deployment rather complicated.
I guess my expectations on the "flexibility"/"design" of some of the generated artifacts is just a bit skewed, and I'll have to find a compromise between my expectations and the Java 6 way of web services. For instance, I also find it somewhat annoying that wsgen will apparently only generate the service against an implementing class, not an interface. E.g., when I have the following web service interface MyService and an implementing class MyDummyService:
@WebService
public interface MyService
    @WebMethod
    public String getString();
@WebService(endpointInterface = "com....MyService")
public class MyDummyService implements MyService {
   public String getString() {
      return "Just a dummy.";
}Then the service in the WSDL specifies its Port as "MyDummyServicePort", so if I ever change the implementation---without actually changing the (web service) interface, I will also have to regenerate all client stubs. I would have hoped that wsgen's "service" option would help in this regard, but apparently it doesn't. Unfortunately, the documentation on the whole issue is in a pitiful state, IMHO.
Cheers
Equitone

Using web services with flash cs3 and actionscript 3.0

Hi,
I want to use web services under flash cs 3 and by using as
3.0.
It was possible with as 2.0 to do it easily thanks to the
webservice Connector.
But I can't find how to use web services under flash and as
3.0.
I thought web services took part of the many improvements
flash cs 3.0 contain, but obviously it does not:(
Can anybody help me to use webservices with flash cs 3 and as
3.0?
Thanks in advance,
Pascal

Dark Armor, You mentioned the book Adobe Flash CS4 Professional Classroom in a Book, which I have. I could not find anything in there. Did you mean to say Actionscript 3.0 for Adobe Flash CS4 Professional? I do have that book and it looks like there is information there. Just wanting to make sure that you meant what you said. Thanks!

How to use web services in Excelsius 2008

I am new to this tool. I have trial version on excelsius 2008 and i would like to build a dashboard that should query our corporate database (in oracle). I think web services is a option to do it. Any samples available?.Please help me
Edited by: AshishDatar on Jul 27, 2009 6:29 PM

Hi AshishDatar:
For you question you want to get data from data base using web service connection. Here I can give you some suggestions
1.Write a web service to retrieve data from data base, then use Xcelsius u201Cweb service connectionu201D under u201CManage Connectionu201D section to consume the service and get the data from data base to spread sheet.
2.Xcelsius also provide you a tool to generate web service with easy way (without coding). (Suggested)
Using flynet, you can get flynet installation file under Xcelsius installation folder u201CXcelsius\Connectivity\Flynet Webservice Generatoru201D for more information about flynet please refer to
http://myxcelsius.com/2008/11/07/generating-web-services-for-xcelsius-using-flynet-web-service-generator/
Here is also a demo on how to use web service conneciton with Xcelsius + Flynet
https://businessobjects.webex.com/ec0600l/eventcenter/enroll/register.do?siteurl=businessobjects&formId=50213992&confId=50213992&formType=1&loadFlag=1&eventType=1&accessType=
Hope it helps with your work! And let me know if you need any further help.
Thanks!
Bill
Edited by: Bill Xu on Jul 28, 2009 8:02 AM

Using web service with our WP 8.1 app

please i need help , for our graduation project we are making an app for tourism but in order to bring data we started to use web service with php and our professor told us to connect our app with something called json web service but I dunno how to do
this i need any help any tutorial to do it a book or something please

I'd start with the documentation:
How to connect to an HTTP server using Windows.Web.Http .

How to use Web services in BI 7?

HI all,
Can anyone pls let me know how to use Web services in BI
Thanks
Pooja

http://help.sap.com/saphelp_nw04/helpdata/en/9b/dad1ae3908ee44a5caf57e10918be9/content.htm
http://help.sap.com/saphelp_47x200/helpdata/en/2d/64d029e74911d6b2e400508b6b8a93/content.htm

Issue using web-service with forms9i

using web-service with forms9i
Hi
I have a setup of oracle9ias release 2 on solaris machine. I have made a web-service which is deployed on nt machine on weblogic server. I have made a call from my form (forms9i) to this web-service. When i try to use that web-service after deploying my form on solaris, it initializes the web-service and performs the action successfully. Now the problem is that my form also makes a call to report server to generate a report. The problem is when i initialize the web-service and uses its function it works but after that making a call to report server will fail. Also if i make a call to report server first, it generates the report and then i make call to the web-service, then that web-service fails to run. And in both cases, the forms application stops saying session has aborted.
Why cant i make call to both the things in one session of application? What could be the reason for that? Need help urgently.

Sorry,
I didn't know that this was necessary to find a solution.
Here are the definition out of the WSDL File:
<xsd:complexType name="ZS_EQART_RANGE_LINE">
     <xsd:sequence>
          <xsd:element name="SIGN" type="tns:char1"/>
          <xsd:element name="OPTION" type="tns:char2"/>
          <xsd:element name="LOW" type="tns:char10"/>
          <xsd:element name="HIGH" type="tns:char10"/>
     </xsd:sequence>
</xsd:complexType>
Thanks for Help
Ron

How to use web service consumer as a source to connect to Salesforce?

I see a lot of articles and mapping xmls on how to use web service consumer but as a newbie I am not able to view the object schema from my salesforce enterprise WSDL after importing it in Informatica designer as a source. My enterprise wsdl has operations like create, retrieve, upsert, delete etc so if I want to read data from account then could someone guide me on how to use the web service consumer to view the fields after importing the wsdl. After importing the wsdl and selecting the operation say create, the columns (ports) displayed shows different groups but it doesn't list the object fields? what am I missing here? And what is the operation to read data from Salesforce is it "retrieve" from the entripse wsdl? As a newbie on this, I appreciate any inputs on this topic.

Magazinweg 7Taucherstraße 10Taucherstraße 10Av. Copacabana, 267Strada Provinciale 124Fauntleroy CircusAv. dos Lusíadas, 23Rua da Panificadora, 12Av. Inês de Castro, 414Avda. Azteca 123 I have the source table like this and i want to replace the character and sum up the numbers and how can i do it, I replace the character by reg_replace() function but I am not able to add the number because it is of not fixed length. My Output should be,71115705396

How to create web services with complex objects as parameters

Hi,
Not sure if this is the right place, but...
I'm using Netbeans 5.5 and trying to learn web services.
Creating a simple web service with simple parameters like strings and integers is nice and easy. I'm now trying to take the next step, and create a web service with a more complex schema as a parameter.
I've tried two approaches, and hit dead ends on both:
(1) Define my complex schema as an xsd file, and then create a WSDL file. Creating the schema and saving it in my EFB project works fine; when I try to create a new WSDL file, the IDE gives me a button to import external schemas - which is where the problem is: the Browse simply won't find my newly created schema file.
(2) Define a Java class (in this case, it's a fairly simple example containing a single ArrayList), and then use the IDE to generate a web service from Java. The IDE does this fine, but I now have no idea how to consume or test the web service - I don't know where to look for the WSDL that has presumably been generated, and I'm also a bit iffy over what answers to give the WSDL creator about port names etc.
Ideally, I'd prefer to get approach 1 to work - can someone point me in the direction of a sensible tutorial for these things?
(Happy to carry on using Netbeans 5.5 or to revert to Sun Studio Enterprise, which I was playing with before.)
All help appreciated, Thanks

- For NetBeans related questions, nbusers mailing list is more suited. It is often visited by NetBeans experts.
http://www.netbeans.org/community/lists/top.html
...[email protected]
The NetBeans users mailing list. General discussion of NetBeans use, this is the place to ask for help and to help others.... (There is a 'Subscribe' button next to the above that you can use to subscribe to the list).
Can you try posting this question on nbusers list?
- SJSE 8.1 is based on an older version of NB (NB5.0).
You should definitely continue with NetBeans, since all development is now being done in NetBeans; all the major JSE modules have been moved to opensource at netbeans.org and are all being developed there. There are as yet no future plans to work on further releases for JSE.
Please check out http://www.netbeans.org for more details.

How to Use Web Printing with Microsoft Excel

Hello,
In the recent How to paper on Use Web Printing with Microsoft Excel, describes few ABAP classes and methods. Can those classes be modified to access much more Microsoft excel objects , such as Macro ? Does any body has tried in those lines ? Any suggestions is eagerly awaited.
regs
D Bret

Hi BW people,
Since we want to modify our reports for printing (and the How-To about enhancement of web printing does not really answer to our requirements) it seems that the Excel alternative is just what we were looking for.
Unfortunately I have been working with these classes for 6 hours now to get a very simple Excel file, but without success. I did fix the bug like Thomas Kauffman told on the forum, changed the dataprovider and prefixes and I followed every single step of the How-To document(also the check of folder options to open/save the .xls file),... The only thing that happens: the URL has changed (bookmark) and the page is reloaded again.
So no Excel file, neither a dialogue box. I also walked -a very long time- through the code (in debugging mode) starting from ZCL_RSR_XLS_HELP_WINDOW_PRINT->PROCESS_CMD but I can't find anything!
Is there anybody with the same problem and -better- with a possible solution to it?
Thank you very much in advance!

Use web service with overloaded method

Hi all,
Does anyone knows how can I use (e.g in VC or GP) a web service with overloaded methods?
When I try to use one, I get the following error message:
com.sap.engine.services.webservices.jaxrpc.exceptions.ProxyGeneratorException: Proxy Generator Error. WSDL Operation with name [search] is overloaded (defined twice). Operation overloading is not supported by proxy generator.
Can I set something in order to be able to use such type of services. Or some other solution?
For some reasons I do not want to change the service operation names.
Thanks in advance!
Best regards,
v s

Hi all,
Does anyone knows how can I use (e.g in VC or GP) a web service with overloaded methods?
When I try to use one, I get the following error message:
com.sap.engine.services.webservices.jaxrpc.exceptions.ProxyGeneratorException: Proxy Generator Error. WSDL Operation with name [search] is overloaded (defined twice). Operation overloading is not supported by proxy generator.
Can I set something in order to be able to use such type of services. Or some other solution?
For some reasons I do not want to change the service operation names.
Thanks in advance!
Best regards,
v s

How to use web services in JSF app

I am unsure if this is the right forum for this question. Let me know if it is not - and where I should go.
Anyways, I'm building a JSF web app, in which there is a datatable page displaying some business data. The app is going to be deployed and run in the customer's web server, but the data to be displayed is from the business solution provider's database. Currently the provider supplies web services to retrieve the data. So, my task is to call these web services from my JSF page, get and display the data.
I've never used web services before. Can someone give me a quick start, as what I need to know to use these web services, and how to use them in coding terms. I googled the web quite a bit and finally decided to turn to SDN forum.
Thanks!

http://help.sap.com/saphelp_nw04/helpdata/en/9b/dad1ae3908ee44a5caf57e10918be9/content.htm
http://help.sap.com/saphelp_47x200/helpdata/en/2d/64d029e74911d6b2e400508b6b8a93/content.htm

How to use Web services

hi all
In my project reserch I have to make a simple user interface for any simple web service. If anybody can help how can I get a free tool to use web services. I am able to find some free small web services on www.xmethods.net but not able to find any tool to use it. It wil be great help is anyone can help about this.
Thanks
Ankur Parekh

Try SuperWebservice at http://www.acelet.com/super/LimpidDebugger/.
Programming is not required. It will list all available services for you.
You call webservice by clicking. You call webservice visually.

How to use a queue with dynamic data

When using a collector I have found that it significantly slows down my loop times. I am using LabView7.1 on a Dell PC with Windows XP. If I use a queue with dynamic data do you think that will require less of my processor and allow for faster loop speeds?
I have created a queue using dynamic data in one loop and I want to retrieve all available samples each iteration in a slower loop. If I use the flush queue I get a 1d array of dynamic data. What is the best way to convert the 1d array of dynamic data so that the array of dynamic data is consolidated back into a single dynamic data type? Any help would be much appreciated.

Hi Dennis,
You could for instance wire the array to an auto-indexed for loop. I attach an example. I assume you wish to concatenate the arrays a singel waveform.
Hope it helps,
Pelle S
District Sales Manager
National Instruments Sweden
Attachments:
Dynamic queue.vi ‏245 KB

How to use web services with Dynamic url behaviour

Similar Messages

Maybe you are looking for