How to used the unicode in interface program in sap abap

hi expect,
can any body give example how to convert the non-unicode into unicode in a interface program.please help me.

First check the connection with the source system. If its ok then replicate the datasource and activate. Then try with running job.
Time stamp error usually happens when source system in BI and r/3 side differs.

Similar Messages

How to use the Eudora e-mail program with new ports

For those of you that still use Eudora as your mail program. Here is how I made the required changes for the new port settings
1) Open Eudora and from the "Tools" drop down menu select "Personalities"
2) In the "Personalities" pane - right click the account you want to change and select "Properties"
3) In the "Generic Properties" pane change the following
   a) Change the SMTP server to    smtp.verizon.net      and leave the "Authentication Allowed" box checked
   b) In the"Secure Sockets When Sending" selection box pick "Required,Alternate Port" . This both turns on SSL
       and makes the port number 465 as required by Verizon
4) Click the "Incoming Mail" tab at the top and then make the following changes
   a) Change the POP server to     pop.verizon.net
   b) In the"Secure Sockets When Sending"  selection box pick "Required,Alternate Port" . This both turns on SSL
        and makes this port number 995 as required by Verizon
Thats it . It should work for you now. You need to do this for each "Personality" (Sub account) you have

Eudora users may also need to make changes to Eudora's Options (Tools > Options) "Getting Started", "Checking Mail" and "Sending Mail" in addition to the changes for each Eudora Personality. I outlined those changes in the "Eudora & server changes" thread--note there is a typo ("smpt" rather than "smtp") in the first post (couldn't edit that post to make the correction) in the thread so make sure to check the entire thread as a later post shows the correct entry.
I had problems with Eudora sending mail (I didn't have problem with incoming mail because I don't use Verizon's servers for that) until I made changes to both Personality accounts and to the Option/suboptions noted above.
Did you get things to work properly without having to make changes in Options?

Using the Open Catalog Interface (OCI) between SAP-ECC 6.0 and SAP-MDM

Hello ASUG Community.
I'm working on an SAP-MDM project where we will configure the OCI interface between SAP-ECC 6.0 and SAP-MDM. The business requirement will be to punch out to SAP-MDM's catalog from SAP-ECC for expensed items (e.g., no material master record exists in SAP-ECC).
The data that will be returned to SAP-ECC will be purchase price info, material group, short text, & our global SAP-MDM item number.
The question I've been trying to design around is "where to store the SAP-MDM item number"?
I've looked into creating a custom filed on EKPO but now feel that a configured text field will be the best solution from an SAP-ECC point of view (less effort on the SAP-ECC side from a development perspective, no need to regenerate the EKPO table, etc.).
The question I'd like to pose to ASUG is.... Does anyone have experience or an opinion to offer using this functionality? It seems that I will have to code in a user exit or BAdi to insure that the SAP-MDM item numbers are returned to the appropriate text field on my POu2019s. Or can this be done using the standard OCI functionality?
I found OSS note 1347656 which references BADI "ME_CATALOG_INTERFACE" but I'm not sure if this right path to go down or if this would be the correct place to code non-conforming OCI mapping requiremetns.
Any insight would be most appreciated.
Thanks. Sincerely,
Rich Wortmann

I would suggest you create a new field for this as you may require thois going forward for reporting as well. Text fields are difficult to report.
Sorry not sure about the BADI to use.

How to download the values to excel from spool sap abap

Dear All,
I am facing a problem in downloading the Zreport to excel file ( where it consists of 95 fields) ,
1.if am running the report in foreground and downlaod to excel file , the all 95 fields are upadting in excel file .
2.if i am schecduling the programe in background and saving inspool, then form spool , i am download to excel file , at that time some of the fields are overllapning ,
for this i want to download t o excel file without overlapping fields,
can any one suggest , how to do same procedue.
regards,
manoranjan

Hi,
whenever you click on Excel download option select spreadsheet instead of unconverted
There is a possibility of download the spool file as txt-file. .
Use Tranx SP01 - select the spool entry -->"spool request --> forward as text . You will find the file in your SAP work directory as <sid><spool#>.
or use fm RSPO_DOWNLOAD_SPOOLJOB.
Download in Background in Excel Format
How to download the data in excel format directly while executing in background mode?
If you will execute it in bacground with ws_download or download, it will be aoutomatically cancel. so what is the procedure to do this. How is can directly read the spool from program?
Download from background is possible, if you could setup the environment
1. create a custom table first
    Table : Y001
    Displayed fields:   4 of   4 Fixed columns:
       MANDT BNAME       Y_SITE    Y_PATH
       010      <userid>     <site>      cd <novell_path>
2. rewrite ws_download to z_download (light modification required, see attachment)
3. ask your basis team to make a copy of command FTP and CHMOD to ZFTP and ZCHMOD resp., make the setting according to your environment.
Moderator message - Please respect the 5,000 character maximum when posting. Post only the relevant portions of code
Hope this will will helps you,
Thanks and Regards,
Manjunath M
Edited by: manjunath4sap on Dec 23, 2010 6:20 PM
Edited by: Rob Burbank on Dec 23, 2010 9:02 PM

How to get the size of uploaded file in sap ABAP MODULE POOL PROGRAMMING

Hello,
I am using a fucntion module GUI UPLOAD to upload a file from pc to SAP .
I want to upload the details of the file.
i.e TYPE NAME AND SIZE of the file.
I am unable to do so.
Help me.
Gaur Mayank

Perhaps you could count this by yourself...
You could approach the correct size by calculating the number of bytes contained in each rows of your table.
For this you will first need to upload the file to a table of string, so that each field separator is counted.
something like:
DATA: lt_data TYPE STANDARD TABLE OF string,
      l_len TYPE i.
FIELD-SYMBOLS <data> TYPE string.
"... gui_upload to lt_data
DESCRIBE TABLE lt_data LINES l_len.
l_len = ( l_len - 1 ) * 2.        "Count 2 bytes at end of each line for CRLF
LOOP AT lt_data ASSIGNING <data>. "Add length of each line
    l_len = l_len + strlen( <data> ).
ENDLOOP.
WRITE: l_len.
This for a single-byte codepage of course... you can use charlen in order to have the length of one char on your system, here I'm asuming it is 1.
Kr,
Manu.

Help! with creating a J2ME program using the http connectivity interface

So this is what I have to do using the http connectivity interface:
1.Creating two threads – one for communication (receiving and sending) and the other (main) thread will be for interaction with the user.
2.The main thread will make use of three midlet forms. The first form will ask for web page address (URL) and separately for a delimiter which will separate the words in the URL document, the third form will display the ratio of all symbols on the page and the number of occurrences of the delimiter specified
3.The second thread should perform http connectivity to the WWW, utilise the web page address supplied and connect to the appropriate web page and read its content, count all symbols on the chosen page, count the number of occurrences of the delimiter given as user input on the same form as the web page address, calculate the ratio between the two and pass this information to the first thread to display.
I have many questions but my main concerns are:
*1. How to communicate using HTTP interface within a thread*
*2. What is a delimiter in the context above and how should it be implemented*
I've been thrown in at the deep end with little programming experience with this assignment. If anyone can share a similar example or answer my concerns I'd be more than happy.
Thanks in advance.

thelane wrote:
hi thanks for the response.
As I said I have coded in other languages before, but this is a new for me in java. I needed to get it working quickley. Now I can clean up.
I will have a look at method and see how I get on.
ANy similiar examples would be great.
Thanks.I can certainly give you a similar example.
Say you have code such as this:
int a = 10, b = 11;
int temp = 1;
for(int i = 2; i < a; ++i) {
temp *= i;
System.out.println(a + " factorial is " + temp);
temp = 1;
for(int i = 2; i < b; ++i) {
temp *= i;
System.out.println(b + " factorial is " + temp);Each section of code takes the factorial of the current variable an outputs it. The factorial code can be placed within a method to be called more easily, as such:
public void factorial(int num) {
int temp = 1;
for(int i = 2; i < num; ++i) {
temp *= i
System.out.println(num + " factorial is " + temp);
}Then, whenever you need to call it, you can just do so:
int a=10,b=11,c=12;
factorial(a);
factorial(b);
factorial(c);

How can I use the color adjustments interface that shows up for camera RAW on jpeg files?

How can I use the color adjustments interface that shows up for camera raw on other files types? The HLS controls had the secondary color adjustments (6 colors instead of the 3). Plus, it had same vibrancy and a better Curves interface. Yesterday was the first time I imported raw into Photoshop CS5 and I got that really cool interface. What is that? Can I use that on other file formats?

Actually I am using the Tradional Chinese Version, when I try to edit the jpg file with camera raw, the system shows that there is no camera raw plug-in. The cmaera raw never work.

How to use the created search helps in the program?

Hi Everyone,
I know how to create Search help elementary / collective search help through SE 11. I have a question, how can I make use of the created search help in the program.
How to use the Search help in the programs, which is created through SE11
Subbu.

Hi,
In case if you want to use in parameters statement, then we can use the suffix MATCHCODE OBJECT syntax.
Eg.
report abc.
parameters : a(10) type c matchcode object ZBELNR.
Hope this helps.
regards,
amit m.

HELP!!! Message - (One or more applications are using the iTunes scripting interface. Are you sure you want to quit?) How do I get this to stop?

I bought a new Sony Vaio Laptop running Windows 8, 64bit, i7 processor. Everytime I open iTunes and then close out, the following message occurs: (i-tunes message - One or more applications are using the iTunes scripting interface. Are you sure you want to quit?) Then it starts counting down from 20 seconds unless I just click on the (Quit) button. How do I get this to stop? Please be specific, I am challenged when it comes down to computers.
Thank You

This was extremely annoying for me, also. I started uninstalling unneeded Sony applications to try to narrow down the problem. It turned out not to be a Sony application... it is some functionality built into the bluetooth driver software package by Broadcom. Uninstalling the bluetooth package (via the control panel) takes care of the problem. Itunes also boots up way quicker. But uninstalling it will remove features related to bluetooth and nfc. For me, that isn't an issue, since I don't use them. Since you said you're "computer challenged" I would probably just send an email to sony complaining about the problem. They'll get in touch with Broadcom eventually (the manufacture of the drivers) and get the problem fixed.
Side note: the Broadcom package is huge... nearly 1GB in size. Which is crazy. I can't imagine what it does considering the size of it. Entire operating systems can take up less storage. Also, I have no idea how it starts an itunes plugin without placing it into the standard plugin directories.

How to use the program called ZSAPLINK to import Function Name

How to use the program called ZSAPLINK to import Function Name

Not sure why you posted into this forum?
Note the header for this forum:
This forum is dedicated to all other development-related questions which are not directly addressed by other forums. This includes Business Objects SDKs, products, or technologies which do not fall under BusinessObjects Enterprise, BusinessObjects Edge, Crystal Reports Server, or Crystal Reports (for example Desktop Intelligence SDK, Universe Designer SDK, Portal Integration Kits, Java User Function Libraries, and other third party technologies or development languages).
Ludek

JNI - How to use the error reporting mechanism?

I've developed a C++ DLL which is loaded from a commercial Win32 application (not written by me) as a plug-in for external calculations. On its initialization the C++ DLL launches the Java VM via the JNI invocation interface. When the DLL functions are called by the application, they forward the calls to Java objects inside the Java VM, again via JNI invocation interface.
This works well, but I have encountered a weird error.
From Java I open a JFrame containing a JTextArea as small console for debug output messages. If I turn output to this debug console off (my printToConsole routine checks whether a boolean flag is set), the string concatenation operator may lead to a crash of the Java VM.
For example, if in one of the Java functions called from the
DLL via JNI invocation interface the following is the first statement,
it leads to a crash of the Java VM and the application that loaded the C++ proxy DLL.
String test=""+Math.random(); // String test not used later
Interestingly, if I comment this statement out, the Java code works fine WITHOUT any crash. I've already thought about potential races and synchronization issues in my code, but I don't see where this is the case. And the string concatenation error fails as well, if I insert sleep() statements in front of it and at other places in the code. However, if I turn on log messages printed to my JFrame debug console (containing a JTextArea), the String concatenation works without problems.
So maybe the JNI interface has a bug and affects the Java VM; I don't see where my JNI code is wrong.
One problem is that I do not get any stdout output, as the C++ proxy DLL is loaded by the Windows application, even if I start the Windows application from the DOS command line (under Windows).
Does anyone know how to use the error reporting mechanism?
http://java.sun.com/j2se/1.4.2/docs/guide/vm/error-handling.html
Is it possible that the JVM, when it crashes, writes debug information about the crash into a file instead of stdout/stderr?
My C++ proxy DLL was compiled in debug mode, but the commercial application (which loaded the DLL) is very likely not.
I do not know hot to find the reason why the String concatenation fails inside the Java function called from the C++ DLL via JNI.

Yes, I've initially thought about errors in the C++ code too. But the C++ code is actually very simple and short. It doesn't allocate anything on the C++ side. It allocates a couple of ByteBuffers inside the Java VM however via JNI invocation interface calls of env->NewDirectByteBuffer(). The native memory regions accessed via the ByteBuffers are allocated not by my own C++ code, but by the program that calls my DLL (the program is Metastock).
The interesting thing is that everything works fine if output to my debug console is enabled, which means that in the Java print routine getConsoleLoggingState() returns true and text is appended to the jTextArea.
static synchronized void print(String str)
{ MetaStockMonitor mMon=getInstance();
if ( mMon.getFileLoggingState() && mMon.logFileWriter!=null) {
mMon.logFileWriter.print(str);
mMon.logFileWriter.flush();
if ( mMon.getConsoleLoggingState() ) {
mMon.jTextArea1.append(str);
Only if output to the JTextArea is turned off (ie. getConsoleLoggingState()==false), the crash happens when the FIRST statement in the Java routine called via JNI invocation interface is a (useless) String concatenation operation, as described above.
String test=""+Math.random(); // String test not used later
Moreover, the crash happens BEFORE the allocated ByteBuffer objects are accessed in the Java code. But again, if console output is turned on, it works stable. If console output is turned off, it works when the (useless) String concatenation operation is removed in the Java routine called from C++.
I've already thought about potential races (regarding multiple threads), but this can be ruled out in my case. It almost appears as if the JVM can have problems when called by the invocation interface (I tested it with Java 1.4.2 b28).
All the calls between C++ and Java go ALWAYS in the direction from C++ code to Java. Unfortunately, there is no special JRE version with extensive logging capabilities to facilitate debugging. And the problem is not easily reproducible either.
JNIEnv* JNI_GetEnv()
JNIEnv *env;
cached_jvm->AttachCurrentThread((void**)&env,NULL);
fprintf(logfile,"env=%i\n",env);
fflush(logfile);
return env;
// function called by Metastock's MSX plug-in interface
BOOL __stdcall createIndEngine (const MSXDataRec *a_psDataRec,
const MSXDataInfoRecArgsArray *a_psDataInfoArgs,
const MSXNumericArgsArray *a_psNumericArgs,
const MSXStringArgsArray *a_psStringArgs,
const MSXCustomArgsArray *a_psCustomArgs,
MSXResultRec *a_psResultRec)
a_psResultRec->psResultArray->iFirstValid=0;
a_psResultRec->psResultArray->iLastValid=-1;
jthrowable ex;
jmethodID mid;
JNIEnv* env=JNI_GetEnv();
jobject chart=getChart(env, a_psDataRec);
if ( chart==NULL) {
return MSX_ERROR;
jobject getChart (JNIEnv* env, const MSXDataRec *a_psDataRec)
jthrowable ex;
jmethodID mid;
int closeFirstValid, closeLastValid;
closeFirstValid=a_psDataRec->sClose.iFirstValid;
closeLastValid=a_psDataRec->sClose.iLastValid;
long firstDate, firstTime;
if (closeFirstValid>=1 && closeFirstValid<=closeLastValid) {
firstDate = a_psDataRec->psDate[closeFirstValid].lDate;
firstTime = a_psDataRec->psDate[closeFirstValid].lTime;
} else {
firstDate=0;
firstTime=0;
jclass chartFactoryClass = env->FindClass("wschwendt/metastock/msx/ChartFactory");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find class ChartFactory\n");
printSBufViaJava(sbuf);
return NULL;
mid = env->GetStaticMethodID(chartFactoryClass, "getInstance", "()Lwschwendt/metastock/msx/ChartFactory;");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find method ID for ChartFactory.getInstance()\n");
printSBufViaJava(sbuf);
return NULL;
jobject chartFactory=env->CallStaticObjectMethod(chartFactoryClass, mid);
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Exception while calling ChartFactory.getInstance()");
printSBufViaJava(sbuf);
return NULL;
mid = env->GetMethodID(chartFactoryClass, "getChartID", "(Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;IIIIIII)F");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find method ID for ChartFactory.getChartID()\n");
printSBufViaJava(sbuf);
return NULL;
jobject symbolBuf=env->NewDirectByteBuffer(a_psDataRec->pszSymbol, strlen(a_psDataRec->pszSymbol) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate symbolBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityNameBuf=env->NewDirectByteBuffer(a_psDataRec->pszSecurityName, strlen(a_psDataRec->pszSecurityName) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate securityNameBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityPathBuf=env->NewDirectByteBuffer(a_psDataRec->pszSecurityPath, strlen(a_psDataRec->pszSecurityPath) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate securityPathBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityOnlineSourceBuf=env->NewDirectByteBuffer(a_psDataRec->pszOnlineSource, strlen(a_psDataRec->pszOnlineSource) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate onlineSourceBuf\n");
printSBufViaJava(sbuf);
return NULL;
// Java Function call leads to crash, if console output is turned off and
// the first statement in the Java routine is a (useless) string concatenation.
// Otherwise it works stable.
jfloat chartID=env->CallFloatMethod(chartFactory, mid, securityNameBuf, symbolBuf,
securityPathBuf, securityOnlineSourceBuf, (jint)(a_psDataRec->iPeriod),
(jint)(a_psDataRec->iInterval), (jint)(a_psDataRec->iStartTime),
(jint)(a_psDataRec->iEndTime), (jint)(a_psDataRec->iSymbolType),
(jint)firstDate, (jint)firstTime );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Exception while calling ChartFactory.getChartID()");
printSBufViaJava(sbuf);
return NULL;

How to do the Unicode Check for Business Objects ?

Hi all,
How to do the Unicode Check for Business Objects ?
Note: All business Objects are stored in BOR (Business Objects Repositary)
Thanks in advance
Sri..

Hi..
i have used the UCCHECK transaction for some business Objects
For some business objects it is showing that No Unicode Errors found Ex: Z00MARA
and for Business Objects it showing the message like : There is no program corresponding to this selection.
Why system is showing like this ?
Thanks in advance
Sri..

How to use the function module ....

hi
how to use the function module ssf_function_module_name in smartforms

Hi..
If you are using this Function module, you can get the generated function module name of smartform dynamically. It is good progrmaming practice to get the fucntion module name dynamically because there might be some problems if you are hard coding in program.
This will return the name of the function module and then from the exporting parameters you can use the fucntion module name to pass parameters to Smartforms.
Check this link.I am expalining here how to use this function module.
https://wiki.sdn.sap.com/wiki/pages/pointstab/viewpageversion.action?pageId=36109&version=2
Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
<b>Reward points if useful</b>
Regards
Ashu

How to use the Bloggie camera with Apple iMovie software.

Solved!
Go to Solution.

Follow these steps to use the Bloggie® camera with the Apple® iMovie® program.
Power on the camera and connect directly to a USB port on the computer.
Once the camera is detected by your computer, the iMovie software should open automatically. If the iMovie software does not open automatically, go to the Applicationsfolder and open it from there.
In the iMovie window, choose Import from Camera...
Choose which clips you want to import and choose the Done button or choose the Import All...button to import all the clips.
NOTE: You can use the standard iMovie interface to edit and create movies from your video taken with the camera. For more information about how to use the iMovie program, refer to the Help menu in iMovie or visit http://www.apple.com/support/imovie.

How to use the dll created by c++ but not write a jni wrapper around

how to use the dll created by c++ but not write a jni wrapper around through a java program. now I can't access that dll like this directly from java.

Your question is unclear. (You haven't said what dll you are talking about.)
But:
If you are talking about an existing dll, then the only alternative to writing a wrapper is to use one of the wrapper generators floating around. Do a search on JACE.
If you are talking about a dll you are writing, then run jah and get the interface to match java right away; then you won't have to write a wrapper.

How to used the unicode in interface program in sap abap

Similar Messages

Maybe you are looking for