How to user Create ID/Passrod in Visual Administrator
Hi All
I don't want to share J2EE admin ID/Password. How can i create a user and assign access to Visual administrator.
Thanks
Hi,
Please login to Visual Admin using an user id and pwd which has administration authorisation of J2ee engine with the P4 port and go to security provider under cluster configuration and you would find a tab on the right hand side for user management under which you would find an option for creation of users and groups.
Hope this helps. pls reward points if useful.
Regards
Sree
Similar Messages
-
Maximum no of administrator users that can login into Visual Administrator
Hi All,
I am using WAS 640 ( ABAP + JAVA Addin) .. I wanted to know is there any parameter that i can set to limit the number of users (all with administrator rights) who can login into the Visual Administrator tool simultaneously...
Thanx...Try this
To increase the maximum number of opened connections and/or the time to wait for a new connection you should change the DataSource properties in the Visual Administrator or manually modify of the data-sources.xml file.
The necessary steps in the Visual Administrators are as follows:
a. Open the Visual Administrator and select Server Services JDBC Connector.
b. Select the appropriate DataSource within the Runtimetab on the right.
c. Select the tab named Additional.
d. Set the desired values for the fields Maximum Connectionsand/or Maximum Time to Wait for Connection.
e. After your modification select Save. The Visual Administrator will prompt you for application redeployment. After confirming that, you should be able to get the connection from the database.
thanks
saurabh -
How can I create an iView without visual components in VC
Hello:
I'm trying to create an iView with on ly a call to a data service inside: start point, call, end pont. But VC it's giving me errors when I compile it.
If I add a visual component to the iView: form, table, html. Iview compiles and works OK.
theer is any wat ti create non visual iViews in VC?.
Thank you in advance.
Regards.Hello Basheer :
I'm getting an error when I'm deploting the iView. That error is only when I deploy as Flex.
If I deploye as Webdynpro or Flex2, there are no deployments errors.
The error text is not ver specific it says that I need to check the flex log.
Do you know wher I can chech that deployment flex log?. I'm not sure if I'm checking the correct log.
Thank you very much for your help.
Regards. -
Creating RFC destination in Visual Administrator results in error
Hi.
I am trying to set up ESS and MSS on a EP 6.0 with SP15.
According to a Post-installation guide for SLD i have to create a RFC destination, but when i save the settings i get the following error: Error changing bundel's properties, see LOG for details!.
And when i try to start the RFC destination i get the following error: Error starting bundle, see LOG for details!
Have anybody encountered this problem, and if so, can you give me a hint to what the problem might be?
Regards Liselottehi
I am also running into this error, and this is preventing me from completing my xi configuration as after i create the bundle..and select start..i get a msg "error starting bundle see log for details.."
what log do i see...?
and a test connection from sm59 also fails..
any help on this is appreciated.
Regards
Ravi -
Creating more administrator accounts for Visual Administrator
Hi
Is it possible to create more accounts for Visual Administrator besides the Admin account. So for example if I wanted to let the development team have access to Visual Admin but I dont want them to use the Administrator account ???
Regards,Boris,
If you want to use the Visual Admin, use these instructions:
http://help.sap.com/saphelp_nw04s/helpdata/en/23/355d87507141548c6f893f28aac7f5/frameset.htm
If you want to use identity management (user administration console) use these instructions:
http://help.sap.com/saphelp_nw04s/helpdata/en/4a/e06f429c789041e10000000a1550b0/frameset.htm
Both UIs do more or less the same thing. With Visual Admin you can assign security roles. With identity management, you can assign UME roles and actions.
The identity management UI has been updated in NW2004s if you are using NW2004 use the instructions here:
http://help.sap.com/saphelp_nw04/helpdata/en/70/9be23d44d48e5be10000000a114084/frameset.htm
Feel free to ask more questions if you have trouble. I maintain some of those help files so I would be interested to find out where you are having trouble.
-Michael -
Visual Administrator window size
How to change the window size of Visual Administrator?
It is too small and maybe I am missing some stuff in the display?
Thanks in advance
CyrusDid you ever find how to increase the size of the Visual Administrator window? We are having the same problem.
-
Could any one tell me that How can i create the service User ie j2ee SID
hi all,
In the implementation of SPNego Authentication schem in my portal system.
i want to create the service user ie .j2ee-<SID>.
<b>could any one tell me that How can i create the service User ie j2ee-<SID> in my visual administrator??</b>.
any help will be highly Appretiated .
thanks and regards.
vinit soni.Vineet,
the user management tab opens in Read Only mode - thats why the button is coming as disabled. There is a button for switching into Edit mode - it looks like a pen / pencil on the top bar. Click on that - your "Create User" button would be enabled.
Also regarding creation of Service User via code level you can see <a href="https://www.sdn.sap.com/irj/sdn/thread?messageID=1057074">THIS</a> thread. And <a href="http://HERE">http://help.sap.com/saphelp_nw04/helpdata/en/f9/e3162ec55f4df6922d161f3785012a/frameset.htm</a>HERE[/url] is the SAP Help documentation on required permission settings.
Regards,
Shubhadip
Message was edited by:
Shubhadip Ghosh
Message was edited by:
Shubhadip Ghosh -
Error creating user in UME or visual administrator
I am trying to create solman_admin userid in J2ee. I tried first in UME - Identity Management signing in as j2ee_admin when I click on create user I get
Current user has user creation permissions in the UME, but cannot create users in the back-end system (data source). The original and possibly untranslated message was: "No active writeable datasource found for user creation, check your Persistence Configuration.".
I then tried signing into the Visual Administrator with j2ee_admin and creating a user there but still get an error message cannot create user. I believe the error message above is saying that j2ee_admin does not have access to update in ABAP? Does anyone know how to resolve this problem?Hi
You are rt, check for datasource used, probably it is database. change the UME datasource from database to ABAP and connect to your production client
regards,
Shyam. -
How to create i view in visual composer give details screenshots
how to create i view in visual composer give details screenshots
Hi,
Go through these threads
VisualComposer
http://help.sap.com/bp_epv170/EP_US/HTML/Executive_Cockpit.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1752b737-0401-0010-0ba3-87c3eda8c6ce
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e019d290-0201-0010-f186-8630a949800a
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30987099-a74c-2a10-70b5-a2751ce79359
http://help.sap.com/saphelp_nw04/helpdata/en/fd/4a7e40417c6d1de10000000a1550b0/content.htm
Tarak
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00b9ba6d-1291-2a10-208d-bd27544e7939 -
How do I create an Apple ID for my kids which are linked to my Apple ID so that they can make purchases without me having to tell them my user/password?
Welcome to the community.
Unfortunately, you cannot do that. The first hurdle that you are going to face, is that mobile devices, by virtue of being prone to loss, will always require that a password is entered before a purchase of any kind is made.
If your concern about the password, is related to your privacy in regard to your mail, contacts and calendar information rather than their acces to make purchases, then the best solution would be for you to use another Apple ID for iCloud.
Apple have called the whole cloud thing iCloud, there are a number of features under the iCloud umbrella, some of which require their own login. iTunes is one of these, another is what Apple have unfortunately also called iCloud too.
You can use the same Apple ID (account) to login to both iCloud and iTunes, but you don't need to and often users will login to each service using a different ID.
The part that you need to remember is that the services available when you log into iCloud are completely different and unrelated to those when you log in to iTunes. Your iCloud login enables mail, contacts, calendars, find my phone, Back to My Mac, Documents & Data sharing and photostream, it does not affect any of your iTunes services. -
How many users for remote connection can I create, from support SAP
Dear all
I have a doubt with how many users can be created in my system ERP 6.0 for the remote connection, for the error product messages on the marketplace SAP,without this counts as user license.
I have not found any notes or documents from SAP to explain this.
I appreciate your help.
Best Regards,
ErikaOk...I will reply to myself. I can use more than 10 simultaneous connection, using vnc.
-
How to get the user created at and modified at properties for a site collection using powershell
Hi guys, I Know how to get the list of users of a site collection by Get-SPUser cmdlet but hte problem is that this cmdlet doesnt give me the user Created at and modifed at properties
can any one tell me how to get these values via powershell????
ps: ignore the 2013 screenshot.. i just want a way to get those values .. if you provide me solution in either 2010 or 2013 , i will crack the other..
plz guys help me ...Get the User Information list and then get the user from that list
$web = Get-SPWeb "siteUrl"
$userInfoList = $web.SiteUserInfoList
$userItem = $userInfoList.Items[0]; #0 here is just for demonstration. You take the user you want here or loop through all users.
$created = $userItem["Created"]
$modified = $userItem["Modified"] -
How to get the user created when I prepare for the BD Identity Manager
Hi I have a query, I need to get a backup database Identity Manager 9.1, I have a problem I do not remember user created to perform the backup, how can you know that I created when I made the installation of Identity Manager, or how can I find
Hi,
You can do this trick:
1) Go to "Deployment Manager" in the Web Console, and open the EXPORT applet
2) Export the User Defined Fields from the USR form. You don't need any dependence for this.
3) Open the generated XML with a text editor.
3) Search for the <SDK_SCHEMA> tag
This tag contains the OIM schema name, wich shoud be your OIM database user.
Hope it helps, -
How Do I Create A New Page To Edit Visually?
I am trying to create a java program with a main. I can get Studio Creator 2 to create the code for a new main that is empty, but I can't seem to get it to create a page that I can add buttons to visually. I know how to add components using code, but I would really like to be able to add them using the Visual Editor. It seems that the only time I can get the Visual Editor to work is when I open code that came with Java Studio Creator. Is there some code I need to add to my java document that will allow a Visual Editing Mode? Or maybe I have some preference not set correctly? Any information regarding this topic would be greatly appreciated.
Nothing needs to be added, but by the sound of it you are trying to add components in java mode and not in "Design" mode. In fact, it sounds like you are trying to modify java files that may not even be tied to jsp and jsf fronts.
How did you create the class to begin with? Did you go to Page Navigation, right click and selct new? -
Not sure what im doing but here goes. There are two of us using itunes on the same lap top with different devices. How do I create a seperate account for me and my device.
The best way is to have each library in a separate Windows User ID.
Maybe you are looking for
-
Change color of font in part of email message
I can't figure out how to change the font color of just a certain part of my email. This should seem easy and it looks like you only highlight the text and click on colors. But that doesn't work. When I clicked on help it said go to preferences.
-
Electronic signature in about 100 documents at a single blow?
In our company we are not using Acrobat yet (except the reader), but thinking of buying it as we need to implement electronic signature for future processes. Now I need to know if it is possible to sign a large amount of documents electronically in o
-
Purchase of server 2012 OLP and windows 8.1 enterprise OLP
i want to buy/purchase official DVD's of the 1: WINDOWS 8.1 ENTERPRISE LICENSES FOR OLP 2: SERVER 2012 R2 LICENSES OLP (for charity hospital) my location is Pakistan can any one guide me the official way and process.
-
SAP_pp_019 heuristics creates automatic fixed pegging relation ship .generally we have automatic fixed pegging and manual fixed pegging . Example : 1) created sale order and triggered GATP 2)It calls CTP where SAP_PP_019 is run and coresponding pla
-
__sparcv8plus question
The macro __sparcv8plus seems to be predefined for CC 5.8 (Sun Studio 11) running on a Sun-Fire 280R with Solaris 8. This is not in the list of predefined macros in the man page for CC 5.8. Also, the macro was not predefined in CC 5.4 (Forte Develope