How to Verify genuineness of SAP certificate?
Hi Guys,
How to verify the genuineness of the SAP certificate?
Please throw some light on this?
Thanks & Regards,
Srinivas.
Hello
I have no idea how you can do this and what are the options.
But I wonder (if any SAP guides read this) if it would be possible (or it already works this way?) to give a unique number to every guy, who gets the certificate, and then publish a webservice (with a fancy website), where one could post the number and check, if that is a genuine one. Would be cool for all:
- the company could check the workforce
- SAP will not get damaged by the liar, who say they got certified but were not
- the people would see an extra reason to get certified
But that is only a naive idea...
Regards Otto
Similar Messages
-
How to verify CA root certificate?
When the client downloads CA root certificate from the CA server , how to verify that the root certificate is actually from the CA server from which we want to connect?
> but I have interpreted this question to be specifially about Root CAs ... as these are the only ones that require explicit trust or trust in a browser / OS vendor.
No, I think the question was about web server trust. Since, the transport is not secured (there is no SSL) you can't verify whether you are downloading from the right server. Say, someone created a rogue web server and gain control over the traffic
(may be, DNS is tampered, or MITM situation). As long this rogue web server responds with the certificate which can be successfully validated by the certificate chaining engine, this web server may be considered as valid.
And vice versa, legitimate web server is misconfigured, and wrong certificate was placed there. Downloaded certificate won't pass the check and you may wrongfully consider this legitimate server untrusted. This is why you can't tell certainly whether
you connected to the right server. You only can make assumptions based on downloaded content after it verification, but yet no certainty.
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell FCIV tool. -
Hi,
Can anyone tell me how do we verify the SAP Certificate, whether it is genuine or fake???
I mean the certificate which we obtain after clearing the exam.
Please share with me.
Thanks
Edited by: MO AHMED on Sep 3, 2010 2:38 PMThis is wrong forum for this question.
check the below link for certification related forum and quries
[SAP Certification;
Clarification regarding certificates and logos from SAP certification exams
[Clarification regarding certificates and logos from SAP certification exams; -
Dear Concern / All,
Greetings of the day !!!
I am an Indian. I have applied / booked for SAP Certification examination through PearsonVUE and the test centre was in Dubai.
I have appeared and cleared SAP Certification Exam in the month of March, 2014 and received my SAP Global Certification which certifies me as "SAP Certified Application Associate" along with the Certificate ID after 4 weeks.
I am seeking support / information / help for the below mentioned:
How or where can I verify my SAP Certification details?
How or where can I validate / update my SAP Certification details?
How or where can I update my status as SAP Certified Consultant?
Where or how can I get SAP Logo?
I would be very thankful for extending your kind support / information / help in this regard.
With Regards and Thanks in Advance
Abhiman SurineniHI abhiman,
How or where can I verify my SAP Certification details?
Pearson VUE - Authenticate Score Report --- go to this link and give your details and for
How or where can I validate / update my SAP Certification details?
Pearson VUE - Authenticate Score Report --- go to this link and give your details same link
How or where can I update my status as SAP Certified Consultant?
Pearson VUE - Authenticate Score Report --- go to this link and check once .... after 1 month the address which you have for pearson vue and address details of you all your SAP certificates will reach you in 1 month to your postal address.
Where or how can I get SAP Logo?
Previously there is one person names Kenneth , he will issuing the SAP LOGO for certified consultants but now you can contact [email protected] they will issue you the logo if possible
you will get all your documents and certification within short time , so no need to worry ...All the best and Good luck for your SAP carrer.
Thank you. -
How to verify Warranty and Genuineness
I want to verify and confirm the warranty details for my phone Xperia M Dual Sim. My friends have confused me that there are non-genuine products also in the market. In need your help. As the phone is purchased on 21 Oct. 2013 and is brand new I can take up the matter with seller if there is any issue.
How to verify and confirm the genuineness and warranty details? Is there any specific email id which is responded and where I can mail?Is this phone available in your country? The reason I ask, if you buy the phone from a different country, the warranty only apply to the original country not any other country. I hope that make sense.
http://www.sonymobile.com/global-en/support/contact-us/
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994) -
Verify.pse in SAP Netweaver 7.4
Hi,
We have been refered to get verify.pse file from Keystore manager in Netweaver Administration tool in SAP Netweaver Portal 7.4
We are aware that we dont use verify.pse and verify.der files anymore while configuring SSO between SAP and Non-SAP systems.
We would like to ask is there any possible way to get verify.pse file SAP Netweaver Portal 7.4 as we need this for Lotus Notes 8.5
Have refered below SAP Help page Keystore Administration - Configuring the Portal for Initial Use - SAP Library but not sure how to obtain .pse file from here. All we get is .crt or .cert certificate files while exporting.
Appreciate if someone can help on this.
Thanks,
TSBHi Tsb,
The reason for this change is that transferring pse files is not supported and any more and you ideally need to use SAPSSOEXT:
Single Sign-On to Non-SAP Systems and Applications - User Authentication and Single Sign-On - SAP Library
Also, make sure that you are on the latest SAPSSOEXT as mentioned in
note 1929803. SAPSSOEXT contains example coding, as well as example data
- please first verify your solution with the sample data provided with
SAPSSOEXT.
Let me know how you get along with this; else I will help you download the pse file.
Thank you!
Kind Regards,
Hemanth
SAP AGS -
How to verify the user information pass by the form with a stored procedure?
Hi,
I would like to know how to verify user information pass by the form with a stored procedure.
I want make a portal which accepts to new user registration, but I want verify the new user's informations (like the name don't contain a number etc).
Thanks for your help
regards
jlaHi Samson,
You can use the UI API to do this. You can catch the form_ADD event and then validate the input from the users. You can even block the event from completing (and stop the document from being added) if your code finds some incorrect data using the bubbleEvent functionality.
I don't have one specific example to show you, but if you look at some of the SDK samples (for example C:\Program Files\SAP\SAP Business One SDK\Samples\COM UI\VB.NET\02.CatchingEvents) to see how to work with events, you can then create your own validation to ensure the users data is valid.
Regards,
Niall -
How to verify PKCS#7 signature and timestamp present in PDF
Hi,
I have certified the PDF and embedded the digital signature with timestamp using iText and Bouncy Castle API's. Can anybody tells me that how to verify the PKCS#7 digital signature, certificate chain and timestamp present in the PDF?
thanks
Gurpreet SinghI think you're pretty much on your own for this. You can probably eliminate
some files based on exstension. For the rest you might want to read the
first 1K and check whether it's all ASCII and whether the first line looks like
a mail header line (e.g., starts with an alpha character and contains a colon). -
How to verify a certification?
A server wants to verify a client's certification to see if it has the right to access the server. Can anybody give me a brief introdution about how to do it?
Now I have a trusted certificate in the keystore of the server. How can I verify a client's certificate with it? I use SSLsocket.
-
How to verify ... variable input
To whom it may concern,
I am referring to this SAP document which suggest that we can verify
the variable entry with a message pop up.
1- How To ... Verify Variable Input.pdf SAP Document
Another BW Expert Online document talks about the same solution
2 - "Add Pop-Up Messages to BEx Queries for Simple Validation and Feedback "
I have tried to implement these solutions, but they do not seem to work as they were printed. I have been in communication with SAP and they have indicated the same.
I have found a number of items not to work:
1) The RAISE again statement gives an error when the project is
activated
2) The variable. Should this not be Customer Exit. IN the picture it
is indicated as user entry.
3) This does not seem to work in the web. Only in the BEx Analyzer.
Do you have any solutions that work in the web.
Basically, what I am trying to implement a solution that checks the variable input
entry before executing the query via the web.
Thank you.
Simon Haddad
[email protected]
PS For anyone who is interested in the code that i have used:
I have looked at the Online help , (the second one)
when i put as mentioned RAISE no_processing, then this is the error that comes up:
"NO_PROCESSING" is not defined as an exception in the function module.
Here is my Code:
Custom message variables for Value Type ** ZM_VTYP# Message User Exit Variable with Value Type from ZS_VTYP# ** ** BW Expert Solution ** Add Pop-Up Messages to BEx Queries for Simple Validation & Feedback ** WBHADS - 15/11/2006 *************************************************************************
WHEN 'ZM_VTYP1' OR
'ZM_VTYP2' OR
'ZM_VTYP3'.
IF i_step = 2.
CLEAR l_s_range.
CLEAR loc_var_range.
CLEAR loc_var_range2.
CONCATENATE 'ZS_VTYP' i_vnam+7(1) INTO var_name.
CONCATENATE 'ZS_VTYP' '1' INTO var_name.
LOOP AT i_t_var_range INTO loc_var_range
WHERE vnam EQ var_name.
Pop-up messages can include warning (W) and error (E) messages as well* as success (S) and information (I) messages.
if loc_var_range-low eq 20 or loc_var_range-low eq 60.
CONCATENATE 'ZS_VERC' i_vnam+7(1) INTO var_name.
CONCATENATE 'ZS_VERC' '1' INTO var_name.
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE2
WHERE VNAM = var_name.
ENDLOOP.
CONCATENATE 'Please Input Version for Value Type'
i_vnam+7(1) INTO l_message SEPARATED BY ' '.
CONCATENATE 'Please Input Version for Value Type' '1'
INTO l_message SEPARATED BY ' '.
IF LOC_VAR_RANGE2-LOW EQ ''.
CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
EXPORTING
I_class = 'RSBBS'
I_type = 'I'
I_number = '000'
i_msgv1 = l_message
i_msgv2 = l_msgv2 change
i_msgv3 = l_msgv3
EXCEPTIONS
Dummy = 0.
OTHERS = 0.
CALL FUNCTION 'RRMS_MESSAGES_SHOW'.
CALL FUNCTION 'RRMS_MESSAGES_DELETE'.
If you want to terminate the processing of the query after the pop-up
message appears, you must include the RAISE again. This stops the
processing of the query so you can return to the selection screen and
enter a valid value
RAISE AGAIN.
RAISE no_processing.
Endif.
ENDIF.
ENDLOOP.
CLEAR l_s_range.
CLEAR loc_var_range.
CLEAR loc_var_range2.
CONCATENATE 'ZS_VTYP' '2' INTO var_name.
LOOP AT i_t_var_range INTO loc_var_range
WHERE vnam EQ var_name.
Pop-up messages can include warning (W) and error (E) messages as well* as success (S) and information (I) messages.
if loc_var_range-low eq 20 or loc_var_range-low eq 60.
CONCATENATE 'ZS_VERC' '2' INTO var_name.
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE2
WHERE VNAM = var_name.
ENDLOOP.
CONCATENATE 'Please Input Version for Value Type' '2'
INTO l_message SEPARATED BY ' '.
IF LOC_VAR_RANGE2-LOW EQ ''.
CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
EXPORTING
I_class = 'RSBBS'
I_type = 'I'
I_number = '000'
i_msgv1 = l_message
i_msgv2 = l_msgv2 change
i_msgv3 = l_msgv3
EXCEPTIONS
Dummy = 0.
OTHERS = 0.
CALL FUNCTION 'RRMS_MESSAGES_SHOW'.
CALL FUNCTION 'RRMS_MESSAGES_DELETE'.
If you want to terminate the processing of the query after the pop-up
message appears, you must include the RAISE again. This stops the
processing of the query so you can return to the selection screen and
enter a valid value
RAISE AGAIN.
Endif.
ENDIF.
ENDLOOP.
CLEAR l_s_range.
CLEAR loc_var_range.
CLEAR loc_var_range2.
CONCATENATE 'ZS_VTYP' '3' INTO var_name.
LOOP AT i_t_var_range INTO loc_var_range
WHERE vnam EQ var_name.
Pop-up messages can include warning (W) and error (E) messages as well* as success (S) and information (I) messages.
if loc_var_range-low eq 20 or loc_var_range-low eq 60.
CONCATENATE 'ZS_VERC' '3' INTO var_name.
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE2
WHERE VNAM = var_name.
ENDLOOP.
CONCATENATE 'Please Input Version for Value Type' '3'
INTO l_message SEPARATED BY ' '.
IF LOC_VAR_RANGE2-LOW EQ ''.
CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
EXPORTING
I_class = 'RSBBS'
I_type = 'I'
I_number = '000'
i_msgv1 = l_message
i_msgv2 = l_msgv2 change
i_msgv3 = l_msgv3
EXCEPTIONS
Dummy = 0.
OTHERS = 0.
CALL FUNCTION 'RRMS_MESSAGES_SHOW'.
CALL FUNCTION 'RRMS_MESSAGES_DELETE'.
If you want to terminate the processing of the query after the pop-up
message appears, you must include the RAISE again. This stops the
processing of the query so you can return to the selection screen and
enter a valid value
RAISE AGAIN.
Endif.
CALL FUNCTION 'RRMS_MESSAGES_SHOW'.
CALL FUNCTION 'RRMS_MESSAGES_DELETE'.
ENDIF.
ENDLOOP.
l_s_range-low = loc_var_range-low.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
ENDIF.Hi San!
Are you able to send me a working copy of one of your bits of code.
Thank you for you analysis. Still some issues however, and there are some debugging issues:
If you can further assist, here is the design of our query:
- i have the following user entry variables ZS_VTYP1, ZS_VTYP2 and ZS_VTYP3 for the characteristice 0VTYPE - Value Type.
- i have the following user entry variables ZS_VTYP1, ZS_VTYP2 and ZS_VTYP3 for the characteristic 0VERSION - Version.
If you put value type 60 (Forecast) in any or all of the value type user entry variables, then you must put a corresponding version identifier, eg. F1
Hence this is where the message that is required.
Otherwise, if Value type 10, or 20 Actual or Plan is entered, then it is fine.
I have put tabs in the code you sent me, but it seems to debug
with these 2 messages:
WHEN is only allowed after case
="... " Expected after RAISE
I have tried to interperet your logic here:
WHEN is only allowed after case
="... " Expected after RAISE
Custom message variables for Value Type *
ZM_VTYP# Message User Exit Variable with Value Type from ZS_VTYP# *
BW Expert Solution *
Add Pop-Up Messages to BEx Queries for Simple Validation & Feedback *
WBHADS - 15/11/2006 *
Userid: San! Message: How to verify ... variable input *
Posted: Dec 15, 2006 3:46 AM *
www.sdn.com - 18/12/2006 *
1) Verification of input variable is done in I_STEP = 3.
2) I_STEP =2 is called for all variable(Customer exit type).
3) i_STEP =3 is called only once for all variable.
1) The RAISE again statement gives an error when the project is
activated---Your Activate..that is not problem..go ahead with that.
2) Variable can be Customer exit..i have done this...
3) It work in Web also..
ZS_VTYP3 is a user-entry varibale and ZS_VERC3 is customer exit
variable.
CASE I_VNAM.
WHEN 'ZM_VTYP1' OR
'ZM_VTYP2' OR
'ZM_VTYP3'.
IF I_STEP = 2.
WHEN 'ZS_VERC3'
CLEAR l_s_range.
CLEAR loc_var_range.
CLEAR loc_var_range2.
CONCATENATE 'ZS_VTYP' '3' INTO var_name.
LOOP AT i_t_var_range INTO loc_var_range
WHERE vnam EQ var_name.
ENDLOOP.
l_s_range-low = loc_var_range-low.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
ENDIF.
ENDCASE.
IF i_step = 3.
CLEAR l_s_range.
CLEAR loc_var_range.
CLEAR loc_var_range2.
CONCATENATE 'ZS_VTYP' i_vnam+7(1) INTO var_name.
CONCATENATE 'ZS_VTYP' '1' INTO var_name.
LOOP AT i_t_var_range INTO loc_var_range
WHERE vnam EQ var_name.
if loc_var_range-low eq 20 or loc_var_range-low eq 60.
CONCATENATE 'ZS_VERC' i_vnam+7(1) INTO var_name.
CONCATENATE 'ZS_VERC' '1' INTO var_name.
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE2
WHERE VNAM = var_name.
ENDLOOP.
CONCATENATE 'Please Input Version for Value Type'
* i_vnam+7(1) INTO l_message SEPARATED BY ' '.
CONCATENATE 'Please Input Version for Value Type' '1'
INTO l_message SEPARATED BY ' '.
IF LOC_VAR_RANGE2-LOW EQ ''.
CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
EXPORTING
I_class = 'RSBBS'
I_type = 'I'
I_number = '000'
i_msgv1 = l_message
i_msgv2 = l_msgv2 change
i_msgv3 = l_msgv3
RAISE no_replacement.
Endif.
ENDIF.
ENDLOOP.
CLEAR l_s_range.
CLEAR loc_var_range.
CLEAR loc_var_range2.
CONCATENATE 'ZS_VTYP' '2' INTO var_name.
LOOP AT i_t_var_range INTO loc_var_range
WHERE vnam EQ var_name.
if loc_var_range-low eq 20 or loc_var_range-low eq 60.
CONCATENATE 'ZS_VERC' '2' INTO var_name.
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE2
WHERE VNAM = var_name.
ENDLOOP.
CONCATENATE 'Please Input Version for Value Type' '2'
INTO l_message SEPARATED BY ' '.
IF LOC_VAR_RANGE2-LOW EQ ''.
CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
EXPORTING
I_class = 'RSBBS'
I_type = 'I'
I_number = '000'
i_msgv1 = l_message
i_msgv2 = l_msgv2 change
i_msgv3 = l_msgv3
RAISE no_replacement.
Endif.
ENDIF.
ENDLOOP.
CLEAR l_s_range.
CLEAR loc_var_range.
CLEAR loc_var_range2.
CONCATENATE 'ZS_VTYP' '3' INTO var_name.
LOOP AT i_t_var_range INTO loc_var_range
WHERE vnam EQ var_name.
if loc_var_range-low eq 20 or loc_var_range-low eq 60.
CONCATENATE 'ZS_VERC' '3' INTO var_name.
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE2
WHERE VNAM = var_name.
ENDLOOP.
CONCATENATE 'Please Input Version for Value Type' '3'
INTO l_message SEPARATED BY ' '.
IF LOC_VAR_RANGE2-LOW EQ ''.
CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
EXPORTING
I_class = 'RSBBS'
I_type = 'I'
I_number = '000'
i_msgv1 = l_message
i_msgv2 = l_msgv2 change
i_msgv3 = l_msgv3
RAISE no_replacement.
Endif.
ENDIF.
ENDLOOP.
ENDIF. -
Verify a X.509 Certificate with Bouncy Castle and Java ME
Hi,
Can anybody point me to an example of verifying a X.509 certificate with Bouncy Castle under Java ME?
I can see how to easily do it in Java SE code with java.security.cert.Certificate.verify(), but I could not find an equivalent method in the lightweight API.
Any help is much appreciated.
Best regards,
iobytrapThat's a shame. I'm afraid I don't have any solutions, but I'm am interested if you find one. If you solve your problem, please post back here. In the mean time I'll keep looking around. Have you considered non-free software? IAIK has some fairly complete Java libraries for $$$, though I'm not sure what they have for JME.
EDIT:
Yes, they have a library for JME and it has an X509Certificate class. Here are the javadocs .
Edited by: ghstark on Apr 17, 2010 2:14 PM -
How to verify receiver jms scenarios with content conversion
Hi All,
I m doing a Content Conversion at receiver JMS Side.
The jms queue is installed in a Mainframe System. i heard that messagesa will be showed only in hexadecimal mode in mainframe system.
So how to verify my scenario?
Is there any way i can check the content cnversion part?Hi,
Hope these links will help
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70ffd890-0201-0010-708f-d5dad2dfcf3a
fine tuning
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/412290ec-0201-0010-0790-dfd946efc5f4
FCC @ receiver
File Receiver with Content Conversion
FCC @ sender
Content Conversion (Pattern/Random content in input file)
regards,
Prashant -
How to renewal SSO public key certificate ??
hiiiiii
How to renewal SSO public key certificate....Hello,
You should replace the existing certificate before it expires as per the link provided below.
http://help.sap.com/saphelp_nw04s/helpdata/en/5c/b7d53ae8ab9248e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/59/6b653a0c52425fe10000000a114084/frameset.htm
Thanks,
Siva Kumar -
How to use a self-signed certificate
Hello,
I am having some troubles understanding how to use a self-signed certificate. I have created one using Keychain Access -> Create Certificate but it never asked me for the private key and it never told me where the certificate is stored. How am I supposed to use it?
Typically I would like to do two things:
1) use the certificate to for example sign an email or other document so that the recipient can verify that it was really me. I understand the concept that they have to have my public key and use it to somehow decrypt something that I have encrypted with my private key. But where is my private key? As mentioned, the certificate creation process never at any point asked me to provide a private key. An example using this process to sign an email would be really appreciated.
2) I want to be able to decrypt a message that someone sends to me after encrypting it with my public key. Again, I need my private key, where is it? I was never asked to choose one!
Please note that i am familiar with the whole process using openSSL ssh via command line, I just need to understand how to achieve the same thing using the certificate creation procedure provided via Keychain Access.
In short, now thta I have created my certificate, how do I use it? Examples for dummies would be really appreciated
Thanks in advance
/AndreaCan you import the CA cert under “Your Certificates.”, delete the CA cert, switched to “Authorities”, re-imported the CA cert, and restarted Firefox.
-
Coded UI: How to verify watermark displayed in the fields and Data grid?
Hi,
I've an requirement to verify watermark in the fields say username field displays "Username" water mark when no data is available in the field and water mark in data grid saying "No data available".
Please observe the water mark displayed in screenshot below:
So how to verify watermark?
Thanks & Regards,
Sunil
Best Regards, Sunil Email: [email protected]Hello,
Depending on what form technology you are using, you can try posting to one of the following forums:
Windows Forms General
Windows Presentation Foundation (WPF)
ASP.Net forums
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})
Maybe you are looking for
-
I have a Iphone 3g,every now and then some of my music will disappear then reappear.I've tried to sync the music from my library on my laptop,nothing happens.How do I get my music back,without having to wait for it to reappear?
-
Where to compare Current and previous messages.
i had requirment where i had to insert the text data from FTP to MSSQL Database (R/3) File -> Xi -> JDBC. but the condition is -> In case the SQL server is down for any time (1 Jan to 4 Jan), and when SQL Server is UP on 5 jan, All the data in R/3
-
PAN No as madatory field in Vendor Master CIN Details
Hi, I want to make PAN No as madatory field in Vendor Master CIN Details. Can anyone help. Regards, Anurag Khanna
-
Error message 'insertion of infotype 1001 (return code 3)'
Hello, I have an IDoc containing many object like 'CP' and 'S' with their IT1001 relationships in UPDATE mode. While posting the IDoc, it's going into 51 status with error message 'Error: insertion of infotype 1001 (return code 3)'. Could you help me
-
I have recently loaded Icloud and received the following message "You can't use ICloud when multiple versions of Outlook are installed. To use ICloud with outlook uninstall one version" As far as I am aware I only have one version. Is there anyone wh