How to view and access files on my iBook G3 from another iMac

**Hello, everybody on this excelent forum. I need to know how to use my Firewire conection, to view and access files in my iBook G3, from another iMac G3, both are OK in working good condition. I put this question because some days ago a Mac expert fix to me the access in my recent SwapMeet second hand aqcired iMac G3, without the original last owner password.
this person are egoistic, and DoNot show me how he use the Firewire do this job.
Thank You: Eduardo from NorthWest Mexico.

Hello, Niel, Thank You very Much for your fast and kindly responce.
the next monday I'll buy a new FireWire cable to test the metod you tell me.
Again thanks and best regards from NW-Mexico.
Eduardo

Similar Messages

Unable to view and access files

Since updating to Yosemite on my MacBook Pro (early 2011), I have been unable to view and access files on my time capsule. I can still access my backups through Time Machine, but not able to view or access the files that I saved onto the device (by method of copy and paste from my laptop hard drive to the TM). Before the "upgrade" to Yosemite I used to open Time Machine, close it, and then the icon of the TM (just like a typical external hard drive) would show up on the desktop. I would double click and open the TM icon and be able to view all the files that I saved onto the hard drive of the TM, as well as a folder that said "Time Machine Backups." Now, all I see now is my MacBrook Pro Icon and a folder named "File Server." and when I double click on either icon there is nothing to view. Please help!

Try this..
Reset the TC to factory and redo the setup.. I strongly recommend the following setup.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only. If you use ethernet also do it for ethernet.. this is important.
You can see the summary of the same thing from apple here.
OS X Yosemite: Connect to shared computers and file servers on a network
I have given somewhat more specific instructions which I believe are important.
With the TC manually mounted can you access the files??
If not please tell me and I will continue to think how to change permissions.
But please if you can at least open a directory and tell me what the permissions are currently set to.
eg. This is a directory on my TC.

How to view and use files on macbook

I want to access and work on files from my macbook pro on my i-mac, how do i do this?

http://lifehacker.com/5808814/how-to-share-a-folder-over-your-network-for-beginn ers
http://www.dummies.com/how-to/content/sharing-a-folder-in-mac-os-x-lion.html
more
mac setup shared folder

How to view and download files on the icloud drive

I have a class I'm taking and have to download files but there are too many to put on my ipad so I bought extra space on icloud to download them, now I need to access those files.

Go t icloud.com then log in with your apple id then click icloud drive then clikc your file then clikc the downlaod icon as in my image

How to View and Access Full Code of Completion Popup

This is wierd. I have an entity bean which generates a value object. There are about 30 parameters in this object. When I try to initialize the object constructor in my entity bean code I get errors since the constructor I created does not have the right parameters or in the right order as generated by weblogic in its value object.
When I try to view the weblogic generated constructor using code completion I get to see only a partial subset of parameters since the workshop editor window is very small and does display all the 30 parameters in the code completion popup.
I need to see the weblogic generated value object so I can use it in my code appropriately.
Is ther a way to see the weblogic generated value object or to get full view of the code completion or have the code completion display entered in the code?
I am stumped. Can someone please help.
Thanks

Thanks for your reply.
I have done exactly what you suggested, but it’s not working. Can you please clarify:
1. Why you set the value to null?
2. Why in jspx backing file and not in usersRolesImpl.java file ?

Using iPhoto 09, 8.1.2 How do I re-route saving pictures to the hard drive? Currently am saving to files on 'my' partition, and would like to change to save to a shared file so both partitions can view and access.

Using iPhoto 09, 8.1.2 How do I re-route saving pictures to the hard drive? Currently am saving to files on 'my' partition, and would like to change to save to a shared file so both partitions can view and access.

Drag the Library from the Pictures folder to the Users/Shared folder. I would point out that folks doing this on 10.6 and later frequently meet permissions issues. You might do better moving it to an appropriately formatted External Disk.

How to view and manage hidden files in folders.

Hi all, my question is: How to view and manage hidden files in folders?. I see hidden files in other computer but no in my Mac.
Some of you can help me?
Thanks..

Most hidden files are hidden for a reason. Tampering with them can seriously affect the stability of the system.
The software Tinkertool can
http://www.bresink.com/osx/TinkerTool.html
Can manage the invisibility, which I would only do after backing up your system.

How to view and print pdf files

how to view and print pdf files

Download and install Adobe Reader: Adobe Reader Install for all versions
Open the PDF file using it. If security restrictions don't prevent it you could also print it.

How to view and edit .md file (text file) via Documents To Go app

Could some one please let me know how to view a text file with .md as the file extension using Documents To Go app? If this is impossible, which app do you recommend.
.md is a markdown file

Hi,
I believe I have my answer now, or at least a good thread on the subject going hear:
http://forums.java.net/jive/thread.jspa?threadID=45148
Thanks,
Mark

Server.log and access file previous record are overwrite

Hi,
I am having problem that my server.log and access file in all instance have been overwrite by latest record. Suppose all the system.out.print will append to the server.log. However, my problem is the log which has been written to server.log in earlier time (mayb morning till afternoon) is replaced. From the server.log, I am only able to view the log which start from 11 pm. The same case happen to access file as well. This incident is not happen everyday but sometimes.
I am wondering what is happen and how i can solve the problem.
Any help/guidance is highly appreaciate.
Thanks.

Hi,
Did anyone know the solution for this issues..
Thanks.

Office 2010 & 2007 - Excel and Access File Locking Out On the Network With Multiple Users

This is also posted in the Office 2010 - IT Pro General Discussions, but was suggested to repost here, since a definitive answer was not found.
Hi,
An issue that's happening is that Excel and Access files are locking on the network. We're currently using Office 2007 and 2010.
Here are some different scenarios that are happening:
When opening the file it is locked out by “User X” which is the person that has the file locked out and no one else can open the file.
When opening the file it is locked out by “User Y” which is NOT the actual person, but is locked out by “User X” and no one else can access the file.
When opening the file it is locked out by “…another user” which is generic and no one else can access the file.
The two more common events are incident 1 and 2 with 3 happening the less common.
This message will continue until the sessions are closed through computer management on the file server.
The file server is running Windows Server 2003.
This does happen on both Windows XP and Windows 7 clients.
This does happen for users using Office 2007 and Office 2010.
There are two sets of Office 2010 Users when it comes to patches. Everyone has the most current patches with Office 2010 SP2 while anyone that has Microsoft Project 2010 is using all the current update before Office 2010 SP2.
All users that are using Office 2007 have all the current patches and service packs.
Another variable is that we have users that will leave a file open on the network for 3+ days and after a while it will lock the file out.
Also we have Shadow Copy that runs daily on the system which I'm not for sure if that impacts anything if a file is opening during that time.
Any ideas on how to mitigate the lock out issues would be appreciated.
Thanks,
Binary Process
Edit November 12, 2013: This issue can occur if and if not another person actually has the file open. If the person doesn't have the file open then there is a hung connection which needs to be disconnected by going to the Computer Management of the File
server.

Hi Binary,
I know that the description of the hotfix does not relate to the issue. The purpose is to install it for upgrading SMB related file.
A similar issue I encountered before:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/b7fcc59b-52d9-4a02-863a-1a529bcb8cb1/temp-doc-etc-files-dont-close-after-a-file-closes-this-causes-locked-files?forum=winserverfiles
It is resolved by upgrading SMB files so maybe it will help on your case.
Another hotfix which may related:
http://support.microsoft.com/kb/983458
If you have any feedback on our support, please send to [email protected]

How to view a PDF file

Hey, i was wondering if anyone knew how to view a PDF file in Java? I'm trying to make a button that will open a PDF file. Is there any other way without downloading an extension?

Kandyman wrote:
The thing with downloading extensions is that they are not free. Some are trial version. iText and Jasper are probably free and stable to a great extent. Plus they allow you to play with PDFs, Excel, Bar charts, Pie charts, CSV etc etc without the hassles of the heavyweight Swing.
- Vaibhav Beohar

Code Execution in Cover Flow View and .mov Files

There is a code inside QuickTime movies that gets executed in Cover Flow view in Leopard!!!!!!!!.
I was helping a friend installing Leopard on his machine, and after restarting, I was showing him the new options in the Finder, when a found a bunch of videos (searched on his computer with Spotlight) and switched to 'Cover Flow View', and then Safari started opening web pages from the internet (Mostly adult sites).
After doing some tests I've noticed that the pages load the moment the Finder 'refines' the view of the videos. You know when the Finder first generates a blocky image of the video (some times called proxy image) and then generates a higher or cleaner resolution of that same video.
Not only that, if I resize the window or the preview pane, the code executed again and Safari opened the pages again!!!!
The Finder also executed the code in icon view with the 'Show Icon Preview' option selected in 'View Options' (Command-J).
Opening the videos in QuickTime Player did not trigger the code. But I've noticed that the videos start playing the moment they open. The Inspector (Command-I) didn't show anything unusual. But the Properties window (Command-J in QuickTime Pro) show a "Sprite Track" of Format 'Sprite' but again the different tabs (Annotations, Resources, Visual Settings or Other Settings) didn't show anything unusual.
*CORRECTION: The code also gets executed at the middle of the video when played in QuickTime. So this problem is related to QuickTime.!!!!!!*
The only solution to stop the code execution is to delete the 'Sprite Track'!!!!.
I also opened the movies in TextEdit and found the following text almost at the end of all the weird symbols:
(I'm sorry but the code disappears when I publish this post).
That's one of the pages that Safari was opening.
I don't know where my friend downloaded those videos, but the potential security risk is imminent.
I had the same results even after updating to QuickTime 7.3
I can upload the videos somewhere (at least the 'clean' ones) so you can make you own tests.
Any thoughts or comments?????
Is this a known issue in QuickTime?????
P.S. Once again please excuse my English (my main language is Spanish).

If I'm understanding correctly the "Sprite" is a part of how QuickTime works. In older versions you USED to be able to attach JavaScript to a sprite and do all kinds of useful and fun things. However, some websites used JavaScript to alter themselves, so a well crafted QuickTime movie could be used to deploy code that would alter websites. As a result, a LOT of this functionality was curtailed in later versions and many cool QuickTime functions no longer work.
The few that DO still work are when they are basic hyperlinks that take you to another web page, (Like at the end of this movie, BUT you have to click the link to go
http://www.makentosh.com/tipsfromtheiceberg/Blog/Entries/2006/3/7Somebody_ToldMe....html
) and others no longer work within the browser (they only work when using the QuickTime player). Give this a try. Use Safari to "Open File..." and open the .mov file. After it's open, see if it generates any other windows from there. If it doesn't, then I'd THINK it's operating as intended BUT it wouldn't hurt to send your feedback here for Apple to look into and/or fix it if necessary.
http://www.apple.com/quicktime/feedback/
Message was edited by: Kyn Drake

HT2506 How to view a .tif file in a MAC

How to view a .tif file in a MAC.
I cand find an MDi convertor for a MAC Pro. Please advise.

Problem solved. I went to cnet.com and searched for "postscript viewer." The top item in the search results was "Postscript Viewer" from a company called Rampant Logic. It works great, and is free.
Sam Cohen
Executive VP and CEO, Pro-Gun New Hampshire --> www.PGNH.org
.....RKBA!..... (the exclamation point means "Shall Not Be Infringed!")

How to view and use an xsl page in apache tomcat

how to view and use an xsl page in apache tomcat do i need to configure
certain files if yes what are they?
thanks

actually how do i embed xsl code into jsp and display it at localhost
do i need to do any configuration before i can view the page

How to view and access files on my iBook G3 from another iMac

Similar Messages

Maybe you are looking for