How to view what are all programs maped with the event....

I am new to this events concept - could you please say
in SM64 we can give Event....
<b>How to view what are all programs maped with the event..</b>
Thanks in advance.

Hi Sam,
See these links:
How-to trigger a process chain using ABAP?
Re: scheduling process chain 3 specific times a day
NOTE: If you want to trigger the process chain from R/3, there are many examples in this forum. However, since the search function is not working now, I suggest you look at OSS Note 135637. This will show you how to do it also.
Hope this helps.
concerning to sm64 ..
Triggering events manually ...
Events let you start background jobs when particular changes in the R/3 System take place. When an event occurs, the background processing system starts all jobs that were scheduled to wait for that event.
example : JOB_OPEN to create a background job..
When scheduling a background job, you can specify it to start "after event".
If you do so, you'll have to create an event in SM62.
If a job is scheduled after event event and you trigger the event with SM64, the job will start.
Events can be raised by external systems in SAP by sending a command to a SAP application server. You can also raise event in any program using function mosule BP_EVENT_RAISE.
Reward if helpful.
Regards,
Harini.S

Similar Messages

  • How to identify what are all the events are created in background jobs?

    Hi all,
    how to identify what are all the events are created for  background jobs. And what events gets triggered for a particular job.
    thanxs
    haritha

    Hi Haritha,
    JOB is a program which starts to a determined point of time and executes some standard programs in the system. JOBs can be planed to a determined point of time on the regular basis (every night, for example) or to some discret time moments. So, the JOB can be planed and then will be started automatically without the manual start.
    Realtime programs are understood in the most cases as actual program execution which is started by somebody to the actual moment of time.
    Typically per JOBs some special processes will be started that should be executed automatically and regularly: for example, IDOC application, some correction reports, statistic updates etc.
    Standard jobs are those background jobs that should be run regularly in a production SAP System These jobs are usually jobs that clean up parts of the system, such as by deleting old spool requests.
    Use
    As of Release 4.6C, the Job Definition transaction ( sm36 ) provides a list of important standard jobs, which you can schedule, monitor, and edit.
    Standard jobs are those background jobs that should be run regularly in a production SAP System. These jobs are usually jobs that clean up parts of the system, such as by deleting old spool requests.
    for more information you can go thru the following thread:
    http://help.sap.com/saphelp_nw70/helpdata/en/24/b884388b81ea55e10000009b38f842/frameset.htm
    About Events:
    Events have meaning only in the background processing system. You can use events only to start background jobs.
    Triggering an event notifies the background processing system that a named condition has been reached. The background processing system reacts by starting any jobs that were waiting for the event.
    Types of Events:
    There are two types of events:
    1.)System events are defined by SAP. These events are triggered automatically when such system changes as the activation of a new operation mode take place.
    2.)User events are events that you define yourself. You must trigger these events yourself from ABAP or from external programs. You could, for example, signal the arrival of external data to be read into the SAP system by using an external program to trigger a background processing event.The event scheduler processes an event if the event is defined in the system.
    For example, if a system (System 1) receives an event from another system (System 2), the event scheduler of System 1 processes the event only if it is defined in System 1. That event does not need to be defined in System 2 (the sending system).
    You define an event by assigning a name (EVENTID) to it. When defining an event, you do not define the event arguments.
    for more information you can go thru the following thread:
    http://help.sap.com/saphelp_nw04s/helpdata/en/fa/096e2a543b11d1898e0000e8322d00/frameset.htm
    When you schedule the process chain or infopackages the jobs associated with it run in the background mode. In case you want to create a job for a specific activity you can do so in SM36. You would be creating jobs that would get executed in any one of the options:
    1. Immediate
    2. Date & Time
    3. After event.
    4. After job.
    5. At Operation mode.
    In case you want to view the job logs go to sm37.
    Also Pls check DB02 for database performance and ST03 for workload .
    Analyse u will have an idea ,
    *pls assign points,if info is useful**
    Regards
    CSM reddy
    null

  • How to find what are all the rules and events are monitoring for specific server in SCOM 2007

    how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
    I need to know what are all the events, services, and rules are monitored for the specific server.
    Kindly help me friends.

    how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
    I need to know what are all the events, services, and rules are monitored for the specific server.
    Kindly help me friends.
    Thanks for the question Sandoss. This is something that we all come across at sometime.
    Thanks & regards, Sumit Agrawal
    The lack of this feature is an inexcusable oversight for an enterprise management product.  They have some serious lightweights making design decisions on the SCOM team. 5 thumbs down. 
    BTW the answer is probably LOTS of stuff. Literally 100's of workflows are running on any server. 
    The following OpsMgr DB query will list all running monitors on a server. Change the name of @srv. I think this works pretty well.  I'd like some feedback if something is missing.
    DECLARE @srv varchar(30)
    SET @srv = 'your name here'
    SELECT mon.displayName as monitor, bme.FullName,bme.DisplayName as object,
    case
        when s.HealthState = 1 then 'healthy'
        when s.HealthState = 2 then 'Warning'
        when s.HealthState = 3 then 'Critical'
        else 'N/A'
    end as Health
    FROM state AS s WITH (NOLOCK)
    left join BaseManagedEntity as bme WITH (NOLOCK) on s.basemanagedentityid = bme.basemanagedentityid
    left join dbo.MonitorView Mon WITH (NOLOCK) on Mon.ID = s.monitorid
    where
    bme.FullName like '%' + @srv + '%'
    and s.HealthState <> 0
    and mon.IsInternalRollupMonitor = 0
    and mon.IsExternalRollupMonitor = 0
    order by bme.DisplayName, mon.displayName

  • How to fetch what are all the tables used in this TR no and Package name of

    Hi Friends,
    I have input of Transport Request no (E070-TRKORR).
    How to fetch what are all the tables used in this TR no and Package name of this Table.

    HI,
    FYI
    SELECT E071OBJECT_NAME, E070MDEVCLASS
    FROM E071, E070M
    WHERE TRKORR = YOU REQUEST NO.

  • I am totally frustrated by the fact that now i have gone to iCloud and after a few synchs, my contacts are all mixed up with the wrong information.  For instance, my email and phone number comes up under someone else's name (a thousand contacts)

    I am totally frustrated by the fact that now i have gone to iCloud and after a few synchs, my contacts are all mixed up with the wrong information.  For instance, my email and phone number comes up under someone else's name (a thousand contacts).  I dont know how to repair this.  what a nightmare

    An icloud account is designed to be used by just one user.  If you have given your ID or set up your account on someone else's device, then their data will be mingled with your or worse.

  • My iPad, Macbook and Apple TV are all set up with the same iCloud email address.  I bought the iPhone 6 and accidentally set the iCloud up with a different email.  My phone will not let me change the email address to be the same as my other devices,

    My iPad, Macbook and Apple TV are all set up with the same iCloud email address.  I bought the iPhone 6 and accidentally set the iCloud up with a different email.  My phone will not let me change the email address to be the same as my other devices, it tells me that email is already being used. How do I delete the iPhones iCloud account and reinstall it to match my other devices.

    Yes it will, just sign out, then sign back in with the correct address.
    Settings>iCloud>Sign Out.

  • How to identify what are all the errors appears in process chain,

    Hi all,
    i have a process chain running, but i want to find out what are all the errors that the process chain has thrown
    thanks
    pooja

    Hi Pooja,
    Errors in monitoring:
    SID error
    Reason: If the corresponding master data is missing for the particular transaction data.
             1. Check for the load timing for the respective master data, if it less than an hour  then make the request red and repeat the ip.
             2. If the data is loaded to PSA then you have to delete the request from target and manually push the data to from PSA.
             3. If we are required for selective update then note down the info source from header and find it in RSA1,select the one with ‘Single as postfix’.
             4. Goto ‘data selection’ tab and change the range.
    Tip: change the last 4 digits for from to ‘0000’and the last 4 digit for to     ‘9999’.
            5. Repeat the ip.
             6. In case only of failure in one target goto RSA1 find the PSA, put he request no. and reschedule it.
    Note: IF PSA is present never make the request red rather delete it.
    Replication error
    Reason: Data source replication Failed.
             1. In order to handle this error you should be known to IP, info source and source system.
             2. Goto RSA1, find the data source in the source sys tab.
             3. Right click on the data source and replicate it.
             4. Since all the transformation rules pertaining to this data source need to be reactivated so go to SE38 and execute rs_transtru_activat_all, data source and sys name.
             5. Delete the ‘red’ request from the target.
    Update R not supported
    Reason: The corresponding initialization flag for the ip is lost.
             1. Goto header click on the ip and goto schedule tab and click initialize in the source system, whatever screen appears delete the only request present(the initialization flag).
             2. Goto RSA1, find the ip in the info source (one with the Adhoc initialize flag).
             3. Goto update tab and select ‘Initialize delta process’ try going for ‘with data transfer’.
             4. Reschedule the IP.
    Duplicate Record Error
    Reason: Duplicate error records for the loaded master data.
             1. Goto info package via header or via RSA1.
             2. Goto ‘processing tab’ and change the ip setting, selecting only PSA and ignore duplicate records and re run the ip.
             3. Do remember to change the ip settings back to the original once after the second step.
    ODS activation failure
    Reason: Prerequisites for ODs activation not satisfied i.e. unique key.
             1. Goto ‘maintain variant’.
             2. Check for the ‘QM’ status of the requests in the target they should be green.
             3. Then click the ODS activation tab.
             4. In the screen which appears put the requests for which ODS activation failed.
             5. Activate these and keep on refreshing them until status reverts from green,
    Remember to refresh these requests one at a time.
             6. If requests are red then delete them from target.
             7. Reschedule the IP.
    Note: Never Try activating ODS manually if it is Y1.
    Aggregate Rollup error
    Reason: No aggregate found for the respective rollup.
             1. Click on the variant in which the error occurred.
             2. Goto chain tab and copy the variant and instance.
             3. Run the nestle provided program YBW05.
             4. Put in info in there and put the status as g – ‘green’.
             5. Execute and refresh the status.
    Lock issue
    Reason: The same ip is been locked by other user or may be used by other process chain.
             1. We can see the locked entries and in the transaction SM12.
             2. Wait for the other process to get complete once the ip loads to target in that process then there is no need for running it for the process.
             3. In other case make the request red, when PSA is present then goto environment tab ->schedule->initiate update.
             4. In the box appears select update in the background.
             5. And the manually update the failed IP’s by selecting manual update in the context menu.
    Alfa confirming value error, Time conversion error, Chain didn’t start, Delay due to long running job, Poor system performance,Heirarchy node exist in duplicate.
    Reasons:
      Alfa confirming error: Data format mismatch.
      Time conversion error: Date, time format mismatch.
      Chain didn’t start: A scheduled chain didn’t triggered at the prescribed timing.
    -For all the above error we have to raise a ticket.
    Idoc or TRFC error
    Reason: An Idoc is been stuck somewhere.
             1. Reload the Master Data manually again from Info-package at RSA1.
             2. Release the Idoc.
             3. In the source system level got environment->transaction->Transaction RFC or Data ware housing level.
             4. In the Screen if the status is ‘Transaction Recorded’ it means its stuck goto edit and click Execute LUW or press F6.
             5. If status is ‘Transaction executing’ then it means its fine wait.
             6. Or raise ticket.
    Error Due to short Dump
    Reason: Error due to Short dump could be due to many reasons i.e. memory, table space, lock, error record, page allocation, failed change run.
    Process terminated in the Source system.
               Reason: Sometimes we face that a load has failed due to job Termination at Source System.             
          This happens due to unavailability of the source system or some connectivity problem between source and target systems.
    1.      Make the request red.
    2.      Delete the request from the data target.
    3.      Reschedule the ip.
    4.      If still the job fails raise the ticket.
    And also check in following links:
    Process Chain Errors
    /people/mona.kapur/blog/2008/01/14/process-chain-errors
    Common Process chain errors
    For Data Load Errors check this blog:
    /people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
    Pls assign points if it helps u,
    Thanks & Regards,
    Madhu

  • How to know what are all the Webservices available in P6V7

    Hi All,
    How to know what are the webservices available for integration in P6V7?
    Thanks,
    RR

    Information on Web Services for P6 are available in the Reference Manual that get installed along with P6 Web Service software. you will find the complete list there.
    Sachin

  • I was trying to do a favor for my gf, and I uninstalled bonjour. What are my next steps with the cloud and ios5

    I was trying to do a favor for my gf, and I accidentily on purpose uninstalled bonjour. It has seemed to really screw up iTunes for me.  What are my next steps to get this back to normal? I have downloaded and using the icloud and ios5. I have two iPhones 3gs and our iPad2. And our computer is windows xp(yes it is time for an upgrade)

    Try the troubleshooting help here.  http://www.apple.com/support/iphone/assistant/phone/
    You may need to restore your iPhone.
    If it won't restore, try here. http://support.apple.com/kb/ht1808
    If nothing helps, you need to contact Verizon for information for an exchange or refund. This is a user to user forum, not Apple.
    Apple's policy for a refund or exchange is within 14 days of purchase. Verizon's policy may be different.
    Definitely try restoring .. hopefully you won't have to go through the hassle of an exchange.

  • How to find what are all web services depolyed?

    Hi all,
    I am taraka working as BA. I have theoretical knowledge on how web services work. I asked to test web services using SOAP UI.
    I have a URL and soap message. But some time I am getting webservice names and not complete urls.
    I would like to find out list of web services exposed at given url.
    Is there any way to find it?
    Please let me know.
    Thank you in advance..
    Regards,
    Taraka

    Usually you would get the webservice urls from the developers?
    Some appservers can give you a list e.g on jboss you can check hostName:port/jbossws

  • What are good compatible Docs with the Ipod touch 5th generation

    I'm searching throughout the net right now and can only find Docs that match older models.

    Hey tcweh, do you wish to charge and play music? Have just great sound? Is the idea to be portable or just a shelf or table top unit? More info would be helpful. Me personally, I like BOSE and Klipsch. Lower cost-- JBL isn't bad, but BOSE is tough to beat. Others may have different opinions. Just make sure it has lighting and you should be OK. Hope this helps, Jem.

  • Sub:ztable fields are used by what are all transactions

    Hi Experts,
    I am having 2 table fields. These two fields are used in 2 different Ztables. Just i want to modify these two Zfields. But i want to tell our endusers, If i am making changes on these two fields means What are all the Transaction codes will affect? I can take what are all programs used by these 2 different fields through where-used-list option. But user dont need to know the program names know? They are familiar with only transaction codes.
    So anyother option is there to find out the transaction codes?
    Thanks,
    Sankar M

    hi
    good
    your query is bit confusing,if you r going to change anything in the zfields than there must be a requirement for that from your end user,apart from that if you r doing any changes than you must know what r the reports going to affect after that,than you need to change them accordingly,i dont think there is any table which ll give you idea that what r the tcoded going to affect after that,bcz its a table that would have been used in different reports in different scenarios,and you have to chage all those reports accordingly.
    thanks
    mrutyun^

  • How can we identify what are all user exits are there for sales orders,deli

    Dear All,
    How can we identify what are all user exits are there for sales orders,deliverys and invoices
    thanks
    nitchel v

    Hi Nitchel
    There are many ways to find out the user exits..
    For example for VA01.
    Goto Transaction ie VA01:
    goto System-- Status
    doubleclick on the program name ie SAPMV45A
    SE38 -> Enter the program name and in the program( SAPMV45A) goto -- attributes
    get the package name from here ie VA
    note the package(VA) and get back to main screen
    goto SMOD tcode  and click on find button in the package spec giv the package name ie VA and execute it
    you will find list of exits available
    check out the exit that suits ur requirement
    goto cmod and create a new project and implement in that user exit.
    You will get the following exits in SMOD..
    SDTRM001  Reschedule schedule lines without a new ATP check
    V45A0001  Determine alternative materials for product selection
    V45A0002  Predefine sold-to party in sales document
    V45A0003  Collector for customer function modulpool MV45A
    V45A0004  Copy packing proposal
    V45E0001  Update the purchase order from the sales order
    V45E0002  Data transfer in procurement elements (PRreq., assembly
    V45L0001  SD component supplier processing (customer enhancements
    V45P0001  SD customer function for cross-company code sales
    V45S0001  Update sales document from configuration
    V45S0003  MRP-relevance for incomplete configuration
    V45S0004  Effectivity type in sales order
    V45W0001  SD Service Management: Forward Contract Data to Item
    V46H0001  SD Customer functions for resource-related billing
    V60F0001  SD Billing plan (customer enhancement) diff. to billing
    For Delivery you will get .. here the package name will be VL.
    V02V0001  Sales area determination for stock transport order
    V02V0002  User exit for storage location determination
    V02V0003  User exit for gate + matl staging area determination (h
    V02V0004  User Exit for Staging Area Determination (Item)
    V50PSTAT  Delivery: Item Status Calculation
    V50Q0001  Delivery Monitor: User Exits for Filling Display Fields
    V50R0001  Collective processing for delivery creation
    V50R0002  Collective processing for delivery creation
    V50R0004  Calculation of Stock for POs for Shipping Due Date List
    V50S0001  User Exits for Delivery Processing
    V53C0001  Rough workload calculation in time per item
    V53C0002  W&S: RWE enhancement - shipping material type/time slot
    V53W0001  User exits for creating picking waves
    VMDE0001  Shipping Interface: Error Handling - Inbound IDoc
    VMDE0002  Shipping Interface: Message PICKSD (Picking, Outbound)
    VMDE0003  Shipping Interface: Message SDPICK (Picking, Inbound)
    VMDE0004  Shipping Interface: Message SDPACK (Packing, Inbound)
    For Billing VF01..Package is VF..
    SDVFX007  User exit: Billing plan during transfer to Accounting
    SDVFX008  User exit: Processing of transfer structures SD-FI
    SDVFX009  Billing doc. processing KIDONO (payment reference numbe
    SDVFX010  User exit item table for the customer lines
    SDVFX011  Userexit for the komkcv- and kompcv-structures
    V05I0001  User exits for billing index
    V05N0001  User Exits for Printing Billing Docs. using POR Procedu
    V60A0001  Customer functions in the billing document
    V60P0001  Data provision for additional fields for display in lis
    V61A0001  Customer enhancement: Pricing
    Or another way is ..
    - Get the program name for that T-Code
    - Go to that program
    - In that program, search for word 'EXIT' or 'CUSTOMER-FUNCTION' by using where-used list which will give u the list of user exits for that program
    And also you can check in the tables in SE16 for user exits..
    MODSAP - Stores SAP Enhancements
    MODSAPT - Stores SAP Enhancements - Short Texts
    MODACT - Stores Modifications
    And there are other ways as well , pls check the forum for this ,
    Regards,
    Vvieks
    Note : If you have any specific requirement then pls let us know , we will guide you

  • How do we know what are all the fields  updated in a screen?

    Hi all,
             If i am making modifications in row details of sales order screen .for eg, <b>i am changing the quantity or price for a row</b> 
             I want to write log file for the updated fields for that particular sales order.
             <b> How do we know what are all the fields are updated ?</b>     
             If we can use SBOTransaction_Notification procedure.How to write code inside that.
             Please provide code example for that.I have downloaded the sample.But i donot know how to use 'Add code to here ' part.
             Please help me to solve this.Hope  your  reply soon
    Regards,
    V.Rangarajan

    Hi, V.Rangarajan!
    When the field in the matrix is filled with some value and the user moves to another field, the et_LOST_FOCUS event occurs. So, i think you can try to handle ItemEvents and use such code (for example):
    if (pVal.EventType == SAPbouiCOM.BoEventTypes.et_LOST_FOCUS && pVal.ItemUID == "38" && pVal.BeforeAction == false && pVal.FormType == 139)
    string ChangedColumnID = pVal.ColUID;
    int ChangedRowNumber = pVal.Row;
    and write the values to your log.
    "38" - is the matrix ID in the Orders form
    "139" - is the Orders form
    Also you can access to the value, that user had put into the field.
    Hope this helps!

  • How to find out what are all the change pointers assoicated for an idoc ??

    Hi ,
    How to find out what are all the change pointers activated for an idoc ??
    Thanks,
    Varma

    Verma,
    You can check what are the active Change Pointers for the message type in tcode <b>BD50</b>
    Use tcode <b>BD61</b> to check whether change pointers are active or not??
    Hope this helps..

Maybe you are looking for

  • Use of NVL, Is it correct or wrong

    Hi, I've doubt regarding the use of NVL in SQL query, Eg. for query : SELECT * FROM NBS_POLICY_MST WHERE ORG_POLICY_ID = NVL(:p1,ORG_POLICY_ID); PLAN_TABLE_OUTPUT | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| | 0 | SELECT STATEMENT | | 2084 |

  • Time machine backup restoring problem

    i recently restored my mac. i saved everything through time machine on a hd. i want to restore some notes from the inbuilt notes app from mac. i know the folder is hidden and sandboxed and all and i followed the procedure, but MY PROBLEM IS that i do

  • Problem with adding cells in dynamic  table

    I have a very simple table set up for listing prices. Only two columns. One is the description and the other is the cost. I've used a previous posted Java script but Adobe will not let me put in prices. This is the script: ar jpt = xfa.form.form1.Pag

  • Descrition of comm channel error in alerts

    I have triggered alerts for adapter and integration engine .. however I would like to have the descrition of the error that we get in Communication channel monitoring inot the alert.. ne idea?

  • Set X,Y Position for loaded SWF file

    I'm sure this question has been asked before, but I have been reading the forum and get seem to find the answer. (Yes I looked at the AS2 dictionary before I posted.) I'm trying to load an external SWF into my stage. I have entered X,Y, coordinates,