How to Watermark multiple images with different dimensions in Photoshop ?

Is there any way that I can place a watermark on the right bottom of multiple images, no matter what dimension the images are? I have tried using Photoshop Scripts > image processor, but it works only for images of same dimension. I want to put watermark on multiple images of different dimensions. This is the output i got.
For the first image the watermark got placed correctly, but for the second image watermark got distracted. As you can clearly see the dimensions are different. Please suggest me some solution.

Open an image to watermark. We must have this open before we start recording an action or else it will keep opening this image and watermarking it over and over again.
In Photoshop go to Windows >> Actions
At the bottom of the Actions Palette you will see a little folder icon, click on it and create a new folder to hold you action in.
Once you have a folder to hold your action we need to hit the Create New Action button (next to the new folder Icon we just used.)
Give our new action a name and set a function key (if required.)
If the record button is not already depressed which it should be by default, hit it now to start recording our action. (located near the folder icon again but this time to the left)
Now that our action is recording go to File >> Place
When the dialog box comes up navigate to your previously created watermark file.
Hit the Place button
Position the watermark as you would normally have it (default is dead center) and hit enter.
Go to File >> Save as,navigate to where you want your watermarked images to finish up and hit save. DO NOT CHANGE THE FILE NAME if you do when you play the batch it will name all the files it saves the same over-writing each other.
Close the image we just watermarked.
when a save dialog comes up do not save the image.
On the Actions Palette hit stop recording.
Our Action is now recorded.
To process an entire folder of images we go to File >> Automate >> Batch
Select the folder in which your images are currently
Select the folder you wish to save the watermarked copies too.
Hit OK
Photoshop is now watermarking all the Images in the selected folder for you.

Similar Messages

Batch processing images with different dimensions

Hi all!
I've been trying to do this for a while and I'm stumped, so I'd like to know if it's even possible. I'm trying to fathom out how to create an action which…
Takes a jpg
draws a shape
masks the image
adds another shape
So I can batch process a ton of images.
I managed to do something like what I'm after but the thing I'm having trouble with is that the original images will have different dimensions.
I have attached (via link) an example image which would be the original (start.jpg), one which would be the desired end result (done.jpg) and the .psd
IF there needs to be a step in the middle of the action where I need to intervene and resize the flat image slightly to fit the canvas it'll still save a load of time.
I know that opening and saving will be taken care of using the batch feature and the result only needs to be a jpg.
Any input will be welcomed!
Here are the working files - http://mikeebee.com/dl/action-test.zip
Many thanks

That's an interesting action, but I thought the expected output was different than what this action produces. First, I didn't think image cropping would have been ok (maybe the OP expects this or is ok with cropping). Secondly, I kept getting caught up in how the right edge was going to actually be skewed (as decreasing in size perspectively off into the distance). This action appears to just visually trick the eye (again which may be what the OP wanted or is ok with). Like I said, just that aspect alone is where I kept getting stuck in how this would be possible without some manual manipulation.
If you take this image http://www.shan-dysigns.com/userForums/photoshop/stripes.jpg and perform this action, you will see how the right side doesn't actually get skewed (as I thought was part of the visual effect wanted). Still, this action is quite nice.

How to backup multiple iphones with different iCloud accounts but same apple id?

I would like to back up 3 idevices each with different icloud accounts to itunes. But they use the same apple id so that itune purchases can be installed on each device (2 iphones and 1 ipad).
All I want to do is create a backup in case the phones need to be restored. I also want to back up before downloading iOS 8.
The Macbook Pro that I will back up to has one user and one itunes library.
Is this possible without mixing up address books and contacts etc? Appreciate if some one could direct me to detail step-by-step instructions if they exist or please tell me how I can do this.
Thanks.

With Family Sharing they don't need to have the same Apple ID anymore.
But backups to iTunes are kept separate among multiple devices; Apple ID and iCloud isn't involved at all. Just make sure the devices do not have the same name.

How to schedule multiple reports with different local to change static field language ?

Hi all,
we have requirement that we will place multiple schedule request on same server ,This schedule request will be different local setting with parameter value like: en-GB,en-US,Chinese...etc .We used translation Manager for this and it takes this parameter and change report language for static fields.
problem is that ,on server it is not working properly,we tested for one report .if we pass prompt value to change local setting in report the we need to log off and login again in CMC to reflect new local or on BI Launchpad we need to refresh page then it shows new language.
How we can do this with multiple scheduled report which will have different local value like en-GB,en-US,Chinese,German....?These schedule request are getting placed in server by one user .
Please help us with sample code.
Thanks
Madan

Hi,
The only approach I can think of is to create a template report which uses variables
For each column you would need to variable
v_columnAName and v_columnAValue
v_columnAName would have a if statement in it
=if([client]="clientA" or [client]="clientC";NameOf([firstName]);if([client]="clientB";NameOf([SSN]);NameOf([lastName]));
v_columnA would have a if statement in it
=if([client]="clientA" or [client]="clientC";[firstName];if([client]="clientB";[SSN],[lastName]));
This would only work when you had a small set of clients.
This might be more managable if it was done in the universe
Regards
Alan

How to get multiple copies with different decription on header line

I want to get multiple copies of print out automatically with different description on header line when i click on save or print button.

is this smartforms....?
if yes then this can be achieved using the copy windows concept of smartforms.....
Regards,
Lalit Mohan Gupta

Editing MULTIPLE images with lightroom 2 corrections in CS3

Does anyone know how to send multiple images with LR2 corrections to CS3
for further editing? If I select multiple images in LR2 and click photo/edit in/photoshop cs3 only one image opens in photoshop. If I could send more than one image at a time it would greatly speed up my workflow.
Thanks

It works for me when I highlight multiple images, right-click on one of them, choose edit in Photoshop. If this isn't working for you, is it possible that your Photoshop screen mode is such that you have to switch images using the Window option on the menu?

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

How to go about multiple inclination with different data selection in Delta

We have to copy large amount of data ( more than 42lak of recodes) selectivly from on ODS to other ODS. in delata load ( BW 3.5 enverioment)
I thought of loading data in slices through delta loading with selection condition.
step 1> Do The initialization with selection condition as for calyear =2001 ( Init without data transfer )
step 2> Take the delta load .. it will take all delta record with same selection
step 3> Now I want to do Initialization with selection condition as for calyear =2002
step 4> take the delta now it will take delta for year 2001 and 2002 both Right ?
Here what problem I am facing.. while doing 2nd time initialization it prompt me to delete the last initialization request form scheduler menu.
if i delete the last request .. will it take the delta for previous initialization selection and new initialization selection. ?
Please advice how to go about multiple inclination with different data selection in delta loading.
Looking forward your reply.

Hi,
step 1> Do The initialization with selection condition as for calyear =2001 ( Init without data transfer )
step 2> Take the delta load .. it will take all delta record with same selection
step 3> Now I want to do Initialization with selection condition as for calyear =2002
step 4> take the delta now it will take delta for year 2001 and 2002 both Right ?
You are correct with this scenario normally. The message you mentioned normally comes up when you open a infopackage and don't change the selection first or in case you have overlapping selections with an already done init.
regards
Siggi

How do I batch resize images with different aspect ratios?

How do I batch resize images with different aspect ratios?

poa66 wrote:
Landscape: I want result to be 1960 x 1103 px and 72 ppi whether the original is 300 ppi or 220 ppi and wether it is 2Mb or 10 Mb. Cropped centered top and bottom.
There will be a set of Landscapes that that have a narrower aspect ratio the 1960:1103 that would also need the top and bottom cropped like all Portraits would could be. You need to realize that center cropping Landscape image that have aspect ratios near 1960:1103 will usually produce acceptable compositions. However Cropping wide panoramas and portraits will only produce acceptable landscape 1960:1103 composition occasionally.
Here you will see what happens when image have aspect ratio the do not fit the desired aspect ratio. Where Landscape are forced to portrait and portrait forced to Landscape. Here are two Collage I populated with a mixture of image with different aspect ratios. One collage has all 3:2 Landscape places and the other 2:3 Portrait places.
I create a 1 image 1960x1103 collage 72dpi and create those too. Note the landscape boy foot is cropped off 3:2 is narrow compared to 1960:1103

How to Link two Facts with Different Time Granularity (Year, Quarter) to a Single Time Dimension

Hello All,
I have the below scenario where i have Two Facts Fact Quarterly and Fact Yearly but one Time Dimension which has Quarter grain.
So my question is how do i Establish relationship from Fact Yearly to Time Dimension??
Ex:

Hi naveej,
According to your description, you want to know how to build the relationship with time dimension and fact tables. Right?
Based on your screenshot, it's better to have only one fact table for sales and build the relationship with time dimension. To determine quarterly or yearly data only depends on how you slice the time dimension. However, I notice that the Revenue for year
is different from the aggregated Profit for quarters. If the Revenue and Profit are different measure, you need to have two fact tables. And you should build the relationship (Regular) between TimeDim and FactYearly on YYYY attribute.
Reference:
Defining a Fact Relationship
Best Regards,
Simon Hou
TechNet Community Support

How do I send docs to multiple signators with different email addresses on Echo sign ?

How do I send docs to multiple signators with different email addresses on Echo sign ?

Thanks man...the problem could be on the signators side.
Rick Schell...Realtor, ABR
www.rick-the-realtor.com
Cell 615-804-3085
Crye-Leike Realtors
Office 615-373-3513
Fax 615-373-5228
Quoting Echosign-Rob <[email protected]>:
Echosign-Rob created
the discussion
"How do I send docs to multiple signators with different email
addresses on Echo sign ?"
To view the discussion, visit:
https://forums.adobe.com/message/6395941#6395941
>

How to move multiple images in applet

Hi,how to move multiple images in applet or random images in applet .
Means moving images.gif around the applet with different starting point ,help me to create that move method ..

why don't you check the tumbling duke applet as provided free in this site? :-)

Loading images with different horizontal sizes

I would like to load images with different horizontal
resolutions (vertical resolution to be the same) dymanically into
an empty movie clip. I would like them to load with the right hand
side of the image lined up with the right hand side of my site. I
have seen many tutorials about how to accomplish the loading of the
movies, but I cannot figure out how to make them open with the
right hand side always lined up on the right.
To be more specific, let's say I have three images of the
varying pixel resolutions (1200x600, 800x600, and 400x600 for
example). I would like the horizontal size to always extend away
from the right hand side of the site with the right hand edge of
the images always lined up.
Is this possible to do by loading them into an empty movie
clip?
thanks

When you load an image file into an empty movieClip, that
clip takes on the dimensions of the loaded content. The
registration point for the clip is set to the upper left corner.
So, once the new image is loaded, just set that clip's .x to the
stage width - the width of the clip.

Wny does ACR 7.3 open a .JPG with different dimensions than PS 13.0.1 x64?

I have a .jpg file that opens in Photoshop 13.0.1 x64 as an image with dimensions of 5588 x 4627 pixels. If I set Photoshop to open it in ACR 7.3 it opens with dimensions 4453 x 4418 with the image looking squished horizontally and cropped at the top.
I captured the image on a Nikon D600. I developed the NEF with DxO Optics Pro 8.1.1 and output a TIFF. I opened the TIFF in Photoshop (without using ACR) and did my editing including some transformation to create mirrored wrap for a canvas. There are versions saved as PSDs. I resized the image for output and used PS to create a JPG. That JPG causes the strange (to me) behavior when Photoshop tries to open the file.
I used the same PSD to create multiple JPGs with differing levels of quality (varyiing from 9MB to 27MB). Photoshop exhibits the same behavior on all of them.
If I process the JPG thruough ACR, the resultant image retains the bad dimensions and distortions.
The Adobe "chat" preresentative said this was expected behavior in a 2+ hour chat. He/she said that they were able to replicate the different dimensions on their end with their images.
Does anyone know if this is normal behavior? If so, why?
Has anyone experienced something similar?
Thanks,
Joe
I am running this on Win7 x64 Home Premium with 8 GB RAM. I also have LR 4.3 installed on the computer and previously used it to process the same NEF file.

I sent the JPG to a service for a print on canvas. They reported that the image was not the proper size and shape when they opened it in Photoshop. Unfortunately I have not been able to get them to tell me what pixel size it was, just rough inches (!?!?!). So I started trying things in Photoshop and came up with this strange behavior that might explain the problem at the service.

Bridge CS4 won't output to pdf multiple images with same filename

Hiya...my googling efforts have thus far failed!
I've got CS4, and in Bridge, I created a New Smart Collection to find all filenames in a folder containing "." or ".jpg" - which in turn searched through all the subfolders like what you used to be able to do in Photoshop CS3. Very simple stuff, but all the images are jpg's, but in multiple folders (I don't want to move them out of the folders, as the files came from an external source, and there are heaps of folders, and I don't want to pdf each subfolder seperately as it will take forever).
The problem is that some of the files have the same filenames (again I'd prefer not to rename, as it happens a lot on this project, and they are all over the place). So whilst Bridge will show the thumbnail images correctly in the content tabbed screen in my New Smart Collection, but once I've done the Output to PDF thing, for example, instead of showing both different images it has pdf only the first image but repeated it twice. And this happens multiple times throughout the pdf, the more times the same filename is used, the more times the first image gets repeated.
I know that it is messy to have multiple similar filenames, but why can't bridge just place the image anyway? It allocated a space for it on the pdf and does show it in bridge, it just doesn't seem to survive the transfer to pdf well.
The only other thing that I have done is use the below link (which was posted on another adobe forum thread) to create a custom pdf output template (nothing too fancy, just number of rows / columns, size, font etc). But I've tried using the standard bridge templates and it does the same thing.
http://www.proficiografik.com/2009/08/03/save-custom-pdf-output-template-in-adobe-bridge-c s4.html
Any help would be appreciated...even if to tell me that I am being unreasonable!
UPDATE 16/11/09
Just to let you know that I seem to have resolved the bug inadvertently with one of the Adobe updates. The below is the link for the AdobeOutputModule-2.1-mul-AdobeUpdate.zip which was released on 2/19/2009 - which allows for headers & footers to be placed in the Ouput pdf. I finally installed it today, and everything seems to be working fine now (i.e. I can pdf multiple images with the same filenames and the pdf will actually show each different image rather than repeating only 1 of the images).
Must have been a fix installed in the contact sheet templates that get installed with the update - not sure why the original version was corrupted, but I've left that with the Adobe guys (I submitted a bug report - and they were able to replicate the problem but hadn't fixed it as yet).
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4228
Message was edited by: djtun71 (16/11/09)

When I click import from disc I am asked to choose a disc and then I get this message:
The following photos will not be imported because they are already present in the catalog. To see these photos in the catalog select 'Show in Library' (the import will be canceled).
This is followed by a long list of images. If I click 'Show in Library' I can see all the images with the same filename. And then they start to automatically write over those images with images from the disc. However they keep the same metadata and keywords from the previous images. If I click on Import and deselect the "don't reimport suspected duplicates" box, it imports only the images that don't share filenames and none of the images that do.
Is there a way of setting the "Don't reimport suspected duplicates" box in preferences?

How to Watermark multiple images with different dimensions in Photoshop ?

Similar Messages

Maybe you are looking for