How to work around audio sounding worse in Logic?

Hi Folks
We just bought Logic 8 for its MIDI, composing/scoring and loop/instrument resources. Have used Nuendo for 5 years, for audio for video, which has included some music creation.
I did some quick recording/playback audio tests and here's how I hear the results:
Voice recorded and played back in Nuendo sounds just like live. Voice recorded in Logic and played back in Logic sounds relatively flat and digital. Voice recorded in Nuendo and played back in Logic sounds relatively flat and digital. Voice recorded in Logic, exported as a file and played back in Nuendo sounds just like live voice and like it was recorded in Nuendo.
So how do you work around the crummy sounding audio in Logic? Is the problem only the audio playback within Logic? Do you compose in Logic, export as files and then mix in another app? If so, which app? Or do you know the export will sound better outside of Logic? Or what other adaptation have people come to?
Thanks for reading.

No audio problems with Logic Pro 8 my side. In fact, it is sounding somehow better than Logic Pro 7 and latency is better. 44/48/96 all sounds great! Bus, FX, output, EXS24, etc. etc. -- wonderful stuff.
Interface wise everything is at my finger tips and I didn't have to do anything to get my control surfaces to work (Mackie). Everything makes sense -- huge improvement over LP7. Really helps me explore being creative.
So far Logic Pro 8 is an amazing step forward -- good work Apple.
Thank you Apple.

Similar Messages

I no longer have access to my icloud email and don't know the answers to my security questions. Does anyone know how to work around this to reset my icloud ID without losing my info? I haven't backed up in a year because of this.

I no longer have access to my icloud email and don't know the answers to my security questions. Does anyone know how to work around this to reset my icloud ID without losing my info? I haven't backed up in a year because of this.

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(123381)

Dev 6.0: Bug in ReportBuilder (!!!) How to work around ?

Hi !
I have a problem with ReportBuilder. After Arrange->Size Objects
or Arrange->Allign Objects the child object doesn't belong to
paren frame. There is no such thing in Developer 2000. Can
anybody help me how to work around it ? It's practically
impossible to create complicated report.
Thanks in advance.
null

I don't know is it's possible to just search and replace as part of the checkout. We do it the other way around. Each user uses his own directory but for jdev all development is done in /mnt_dev/...
So you map the users development directory to /mnt_dev. this way the path information stays constant and you don't need change the environment.
Timo

How to get around audio clips' audio changes not working

Here is how I got around the annoying (and recurring) problem of audio clips not being adjustable. First, it's a good idea to add your music track as the very last thing you do. Often, when I am editing a video together, as soon as I drop in a full length music track, I'm no longer able to make changes to my audio clips. So now I drop in the music track as the very last thing I do to my project. If I want to test a music track in the file, then I drop it in, press Command G to preview my project, and when I'm done previewing the project with the music track, I immediately press Command Z to undo the addition of the music track. If, for whatever reason, I'm still having problems with audio clips no longer updating changes I make to them, I have discovered a trick that works: make the changes to the clip's audio, then copy the clip, then delete it, then paste it. The pasted version should now have the updated audio adjustments. Worked for me, anyway.

Hi,
Have you tried the very first link ? Please try it now if still no luck please use Scan now from the following link:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=5318926
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How To Work Around Set Up Issue With Time Machine?

When I attempt to set up an external drive for Time Machine I get this: You do not have appropriate access privileges to save file “.001b63b53d7a” in folder “Time Machine Backups”. I have searched for this file and cannot find it. I have deleted any and all Time Machine Backup files.

I worked through the first four on the work around and this is what the terminal screen looks like:
Last login: Sun Jan 11 20:59:31 on ttys000
Macintosh:~ Brokenarrow$ cd /Volumes
Macintosh:Volumes Brokenarrow$ ls -al
total 12
drwxrwxrwt@ 5 root admin 170 Jan 11 20:01 .
drwxrwxr-t 40 root admin 1428 Dec 28 15:42 ..
lrwxr-xr-x 1 root admin 1 Jan 10 06:29 Macintosh HD -> /
drwxrwxr-x 15 Brokenarrow Brokenarrow 1020 Jan 11 19:56 Time Machine Backups
drwx------ 1 Brokenarrow Brokenarrow 2048 Jan 11 20:10 mikesmail
Macintosh:Volumes Brokenarrow$
I tried to determine which was the back up volume name (tried Time Machine, Time Machine Backups) but no luck. Any suggestions? Thanks for your patience.

200ms delay in windows tcp ip - how to work around?

I have just found out the hard way that there is a inherent 200ms delay in sending TCP/IP messages on windows machines. Work arounds for this are:
1. Play with the registry settings for the TCP Receive Window;
2. Set the TCP_NODELAY via the wsock32.dll (or on socket establishment), or
3. Write my own TCP library in C.
My preferred option is #2 as the others defeat the purpose of LabVIEW, however the wsock32.dll functions require the SOCKET reference as an input - I am not sure what the connection ID returned by the LabVIEW TCP functions is - can someone help me??
Cheers,
Wayne

Wayne,
I am hoping that you have already heard back from Austraia support, but I will post here as well.
LabVIEW has the Nagle algorithm on by default. We have written a VI that will turn it off. Please see KnowledageBase 2ZAH5EEG: Do LabVIEW TCP Functions Use the Nagle Algorithm?. This should resolve your issue.
Randy Hoskin
Applications Engineer
National Instruments
http://www.ni.com/ask

How to work around the java runtime bug -The indentation is overridden

Hello all,
I generate xml from a servlet and stream to client as the following code. It works fine in my local machine (The xml is indented nicely) but when the war file deployed on a geronimo server 2.0.2. (It uses java 1.5.0_16). The xml streamed out without indentation
               response.setContentType("application/xml");
               response.setHeader("Content-disposition","attachment; filename="+fileName);
               // set up a transformer
               TransformerFactory transfac = TransformerFactory.newInstance();
               Transformer trans = transfac.newTransformer();
               trans.setOutputProperty(OutputKeys.METHOD, "xml");
               trans.setOutputProperty(OutputKeys.ENCODING, "UTF-8");
               trans.setOutputProperty(OutputKeys.STANDALONE, "yes");
               trans.setOutputProperty(OutputKeys.VERSION, "1.0");
               trans.setOutputProperty(OutputKeys.INDENT, "yes");
               trans.setOutputProperty("{http://xml.apache.org/xslt}indent-amount", "4");
               // create string from xml tree
               DOMSource source = new DOMSource(doc);
               ServletOutputStream os = response.getOutputStream();
               OutputStreamWriter w = new OutputStreamWriter(os, "UTF-8");
               StreamResult result = new StreamResult();
               result.setWriter(w);
               trans.transform(source, result);This is the bug: http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6337981 (The indentation is overridden)
I tried the work around suggested there by using OutputStreamWriter, it doesn't help.
(I cannot change anything on the server. I have to accept whatever in the server)
Please help
Thank you
Edited by: mycoffee on Jun 10, 2011 8:16 AM

You have to set the indent level on the factory, see bug #6296446. This only affects 1.5; 1.6 allows you to set the indent level on the transformer, as you did (and for cross-version compatibility, setting it on both doesn't hurt).
transfac.setAttribute("indent-number", Integer.valueOf(4));

How to work around audiobook limit?

The ipod doesn't handle audiobooks (m4b) that are over 13 hours properly. It plays fine, but if you try to rewind a bit after passing the 13 hours mark, it "snaps" back to 13 hours or so.
for example I was on a plane listening to an 18h long audio book, around the 16 hour mark I got distracted by a flight attendant and missed a crucial minute of the book. I rewinded a few minutes without thinking and bam! the audio book now starts playing at the 13h mark or so, wiht no way to fast forward back to 16h. The only way I know to deal with it is to re-listen to the 3 hours of audiobook before catching to where I was. Let me tell you I had a few choice words not repeated here about Apple's "quality" products.
I've seen an explanation somewhere about the technical reason for the limitation (something about the max file size?), but I also hear Audible files don;t suffer such as limitation.
I'm assuming Apple will never fix this on the Classic, since it's all about the iPhone now. What is the best way to deal with it? if I split the audiobook into two files smaller than 13 hours each, each file will appear in my audiobook list twice(since I always keep a dozen books around for those long international flights, it is a big deal to me). I will have to manually start the second part of the book, which is just dumb and detracts from the user experience.
Is there a "seamless" way to make it work?

Hi,
ok I have several suggestions:
* when adding an audiobook to itunes (so the basic files), make sure you have a file for each chapter. When copying from your audioCD this should automatically happen (pop cd in computer with itunes running and it should ask whether you want to add the files to the library). Same when buying audiobooks from itunes, or downloading from free sites like librivox. Solves the length issue.
This, of course, can result in about 60 or more files for the one book, so:
take care these files are named correctly so they are in order.
I have tons of audiobooks on my ipod at the same time (lot's of travelling) and my system is as follows: name of the book_01 name of the book_02 etc.
This should result in automatic correct sorting. If it doesn't mess around a bit with the info tab information like track/cd number to get this sorted.
Also select all your audiobook files and,(again) right click select "show info" (I'm running itunes in Dutch so might show up with a different title here), then look on the different tabs and enable the function 'skip when in shuffle mode"
As well I like to tell itunes it's dealing with an audiobook rather than music (should be same tab).
Then what I do is I make a playlist (file/add playlist) or folder with several playlists (eg for historical books vs sci fi etc). Still in itunes, and give the playlist the name of the book. Add alle the files. Check the sorting (on name) en then add this playlist to your ipod (just drag it up there or run synchronise).
On your Ipod you'd select your book like any normal playlist. Scrolling back whitin any chapter is no problem and can be achieved in the normal way.
So might sound like a lot of work, but can be done really quickly once one gets into the habit.
Good luck!

How to work around 200 device limit in AXL ?

When you send a SOAP request (SelectCmDevice) to retrieve a list of all phones, it only returns 200 devices max. My question is how do you retrieve more than 200 phones. Is there a way to loop through them. If you send multiple requests, does it know that these requests are for subsequent set of 200 phones -- as opposed to sending the same 200 devices?

No audio problems with Logic Pro 8 my side. In fact, it is sounding somehow better than Logic Pro 7 and latency is better. 44/48/96 all sounds great! Bus, FX, output, EXS24, etc. etc. -- wonderful stuff.
Interface wise everything is at my finger tips and I didn't have to do anything to get my control surfaces to work (Mackie). Everything makes sense -- huge improvement over LP7. Really helps me explore being creative.
So far Logic Pro 8 is an amazing step forward -- good work Apple.
Thank you Apple.

How to work around dataflow order in front panel simulation?

I'm on the steep part of the Labview learning curve. The attached vi is my attempt to simulate the user interface of the product I'm working on. I'm posting because every workaround I dream up to deal with Labview's dataflow architecture results in more complexity. I think I'm putting bandaids on top of bandaids!
If you run the vi you should see what I'm trying to accomplish. The 5 Mode Select buttons send the machine into one of 5 available modes, implemented with a case structure. Delay blocks within the cases simulate how the machine will react. Random number generators simulate occurrence of fault conditions. RS flip flops simulate momentary contact buttons.
Some rules:
- pushing a mode button should instantly switch the machine to the selected mode (my vi doesn't work that way).
- probe test mode should execute just once. My vi simulates this one-time operation by latching the test result - kludge!
- if a fault occurs, it can only be cleared by "power cycling" (stopping and restarting the vi)
Questions:
1) is there an simpler way to simulate momentary contact buttons?
2) is there a simpler, better way to select the cases? I'd like to automatically go from Test to Stop after a single execution of the test case.
3) what is an efficient way to initialize the mode indicators? They 'remember' their last state through a power cycle.
Thanks for any and all insight!
Jeff
Jeff
Climbing the Labview learning curve!
Sanarus Medical
Pleasanton, CA

An alternative method for the UI is to use the radio buttons control. You can customize the standard one to use the square buttons, and I believe this would give you the equivalent effect that you're doing with the lights. See attached VI along with customized control. For the customized control I took a standard radio button control, opened it for editing, and replaced the circular booleans with square buttons. The radio button control is an enumeration, with the enumeration items being the labels of the individual controls (not the text inside the buttons). The control is set so that the labels on the individual square buttons is not visible.
Attachments:
Event Structure Example2.vi ‏45 KB
Control 1.ctl ‏6 KB

How to work around absolute pathnames in .jaxrpc?

We have a .jaxrpc file describing a web service.
In the project navigator, right-click on the service and select "Regenerate web service from WSDL", works fine.
Now if I check out the source from SVN into a different directory, it won't work -- the error is "The given WSDL location <blah> is not in the current source path.". The problem item is
<value n="WS_WSDL_LOCATION" v="/opt/foo/projectname/public_html/WEB-INF/wsdl/"/>
We do want to check out to a different directory because we have some dev machines shared by more than one user, each of whom has their own home directory and checked out files.
Is there some way to use a relative pathname here, or else to do a search&replace on checkout from SVN?
Using JDEVADF_11.1.1.3.PS2_GENERIC_100408.2356.5660 on Linux.
Thanks.

I don't know is it's possible to just search and replace as part of the checkout. We do it the other way around. Each user uses his own directory but for jdev all development is done in /mnt_dev/...
So you map the users development directory to /mnt_dev. this way the path information stays constant and you don't need change the environment.
Timo

How can I make audio sound as if it's coming from AM radio?

Hi. I'm kinda new to Soundtrack. I'm looking to add some audio to my video that sounds like it is being played through an AM radio. Not an old scratchy '30s sound, but more like something from the early '70s, (classic rock soundtrack) if that makes any sense. Are there settings that would start me in the right direction?
Thanks in advance.
Craig

I found a program called Speakerphone that looks great, but the website is horrendous to navigate regarding pricing/ordering etc.They lost a potential customer because of it . . .
Speakerphone is awesome. I have it and use it all the time for post effects. The company, Audioease is German - don't know if that's the cause of the web problems, but the plug-in is da bomb.
On-line store is here
http://www.audioease.com/Pages/Store/products_usd.html

[ADF-swing] ViewObject blocks EDT, how to work around?

I'm working with JDeveloper 11.1.1.5.
I have a query-based VO that takes a long time to execute.
While the Statement runs I want to show a Waiting Dialog showing an animated GIF so that the user knows the application is working and not hung.
When I do the query directly then my WaitingDialog shows the Animation as expected. The following runs in a thread of ist own:
ViewObject viewObject = myApplicationModule.findViewObject("MyViewObjectsName");
PreparedStatement s = ((DBTransaction)_am.getTransaction()).createPreparedStatement(viewObject.getQuery(),0);
try{
s.executeQuery();
}(catch SQLException ex){
ex.printStacktrace();
when I Change this to execute the vo instead the Dialog hangs:
ViewObject viewObject = myApplicationModule.findViewObject("MyViewObjectsName");
viewObject.executeQuery();
how do I configure ADF so that it does not block EDT?
bye
TPD

An alternative method for the UI is to use the radio buttons control. You can customize the standard one to use the square buttons, and I believe this would give you the equivalent effect that you're doing with the lights. See attached VI along with customized control. For the customized control I took a standard radio button control, opened it for editing, and replaced the circular booleans with square buttons. The radio button control is an enumeration, with the enumeration items being the labels of the individual controls (not the text inside the buttons). The control is set so that the labels on the individual square buttons is not visible.
Attachments:
Event Structure Example2.vi ‏45 KB
Control 1.ctl ‏6 KB

How to balance the audio sound on my system. the keyboard sounds vibrating and echoeing,

I would like help with the settings of this system. Since I did the critical update, it is recording sounds of fingers, voice, keyboard and the speakers volume cannot be set high because of the vibration and echoeing. My system is HP Pavilion dv6 6102sa. Could anyone help me sought this out. Its just annoying hp assistance can't help.

Right speaker of my laptop, HP Pavilion g series is not working, please help
Ashraf

How to work around issues with tablet PC input service

On some systems the Tablet PC Input Service is running and it interferes with JavaScript based UI frameworks (jQuery, Kendo). Is there any solution to fixing this issue through code? The alternative would be to tell every user to check for this service to be running and turn it off....which also turns off support for Wacom tablets, smartboards and a bunch of other stuff.
Works fine in IE, but also fails in Chrome, so it is not only Firefox. And it is not only one app, there are reports of different browser based apps failing.
Any advice is greatly appreciated.

Yes, this also happens on the old version. It is tied most likely to the Tablet PC Input Service. I tried it also with a touch interface and there some stuff works now, but others does not. When using FF with a touch interface I wonder how well that works out.
I saw the other post before, but there was no solution given either. The only workaround so far that I found is to stop that Windows service, but then some hardware such as the graphics tablets won't work any longer.
One more reason why touch UIs are currently total flops....but that is a different discussion.

How to work around audio sounding worse in Logic?

Similar Messages

Maybe you are looking for