How to write 3 AVI files from 3 different cameras connected to 3 PCI 1411's?

I have a multiple camera acquisition vi and a AVI read/write vi, but I want to acquire from 3 cameras and write 3 AVI files simultaneously. The multiple camera vi uses buffers but the AVI read/write vi does not(I think). How can I accomplish my goal?

Your best bet is to use the new IMAQ Vision 7, which was released last Tuesday, I believe. It now has native support for writing compressed AVI movie files. These VIs are used the same way the Write BMP.vi and other file I/O VIs are used in IMAQ Vision 6.1.
Writing 3 files simulateously should be fairly straightforward. If you can get it to work with one camera (img0), then just copy and past the code two more times for img1 and img2. Also write to three different AVI files. That's all you should have to change! Bandwidth to the harddisk may be another matter all together...
Kyle V

Similar Messages

TS4256 How to open .RAF files from Fuji camera?

How to open .RAF files from Fuji camera in Aperture 3?

Only these Fuji cameras are currently supported: http://www.apple.com/aperture/specs/raw.html
Fujifilm
FinePix S2 Pro
FinePix S3 Pro
FinePix S5 Pro
FinePix X100**
X-Pro1***
X-A1***
X-E1***
X-E2***
X-M1***
X-T1***
X20***
X100S***
If you have a different camera, use the software that came with your camera to develope the RAW files and convert them to a different lossless format, that Aperture recognizes.

How to include header files from different directories?

Hi,
Sorry for the newb question, but I can't figure this out. I'm trying to compile a simple piece of code (C++) that uses header files in a directory different from the Project directory; header files are in /opt/csw/postgresql/include/pqxx. I've tried a few different things, adding that directory to the include directives under Resource Files, add existing files from a folder, etc etc. Whenever I try to build, dmake bails with status -1. I can't seem to get this working, can someone explain how to use header files from different directories?
Thanks,
SlowToady

Header files are usually specified relative to a base directory. If the base directory is not a system directory -- /usr/include or the compiler installation directory -- add a command-line directive
-I path/to/base/dirfor each such directory.
The path can be absolute, such as
-i /opt/csw/postgresql/includeor relative, such as
-I ../../my/includeIn your source code, specify the header file relative to the base directory, and be sure to use quotes, not angle brackets. Example:
#include "header.h" // right
#include <header.h> // wrongThe angle brackets are used for system headers, like <iostream> or <stdlib.h>.
The rules above are common to all compilers on Unix and Linux, and generally to all C and C++ compilers.
For more details, read about the -I option in the C++ Users Guide. You can find the guide by pointing your browser to the "docs" directory in the compiler installation, or go here:
http://docs.sun.com/app/docs/doc/819-5267
All command-line options are described in Appendix A.

How to access Excel files from different locations?

Hello,
I have successfully tested the Excel sample on WLS 7, and trying to run it on
the WLS 8.1.
Anyways, the common question for both is, how to access an excel files from different
locations (e.g. c:\path\1.xls, \\domain1\finance\fin.xls, \\domain1\marketing\customer.xls,
\\domain2\accounts\vouchers.xls)?
From example i can see that it picks from a specific path under repository.
Thanks
Ashok Gupta

The custom function sets the MS-Excel default directory to System.getProperty("user.dir")+"/excel"
(the domain directory), then opens the filename passed as a parameter. I assume
that if you pass in the fully specified path for the excel file ( like d:\MyDir\data\test.xls),
that it would open that file.
- Mike
"Ashok Gupta" <[email protected]> wrote:
>
Hello,
I have successfully tested the Excel sample on WLS 7, and trying to run
it on
the WLS 8.1.
Anyways, the common question for both is, how to access an excel files
from different
locations (e.g. c:\path\1.xls, \\domain1\finance\fin.xls, \\domain1\marketing\customer.xls,
\\domain2\accounts\vouchers.xls)?
From example i can see that it picks from a specific path under repository.
Thanks
Ashok Gupta

How to call java files from different directories

hi, how do i call java files from a different directory??
let say i got partA.java, and i need to include functions from partB.java which is in a different folder. how can i do that?

Chicon wrote:
Hi nuttynibbles,
Before the class declaration in partA.java, you must have an import statement like :
import someDirectory.partB;
public class partA {
... and before you ask... you'll probably want to read through this http://java.sun.com/docs/books/tutorial/java/package/index.html

Can't Import large .avi file from digital camera into iPhoto 08

I have a digital camera with a 4GB SD card. I was shooting video and have several small .avi files on the card and one large .avi file (2.67 GB) on the same card. I did not have a problem importing the small files. iPhoto hung while trying to import the large file. I read in this forum that I should use Image Capture, which I tried. When I used Image Capture on the smaller files (just to see how it worked), my camera would flash while it was transferring. When I tried Image Capture on the large file, the camera did not flash and after about 20 minutes, there didn't seem to be anything going on with the transfer. I also tried an old card reader through Image Capture, and that didn't work either. Should Image Capture be able to handle this size file? Do you know of any way to break up the large file into smaller files on the SD card? What am I missing? Thanks!

Canon's cameras do not mount on the Desktop. It's a 'feature' of the brand.
There are several possibilities for Image Capture - including minor directory damage on the card etc. The only solution is get the card to mount, and that means a recent Card Reader.
Regards
TD

Client Supplied AVI files from Flip Camera--Can't Edit in Premiere CS3

A client handed me a DVD-ROM disc with video footage he shot on a Flip camera.
The footage appears to import with no errors, but when I drag it to the timeline, I am presented with the "no" icon (O with a slash through it).
Apparently CS3 only sees the file as audio and I can drag it there.
VLC Media Player will play both the video AND audio portion, so I know the files are complete. It is just Premiere that can't deal with them.
Before I tell the client I can't take the job, is there anything I overlooked that would make these Flip camera AVI files editable in Premiere CS3?

Here is one of the ARTICLES that Harm mentions, from the PrE Tips & Tricks sub-forum.
There is also a very recent post to this forum on using the Flip material. I think that I, Jeff and probably Harm commented in that one. You can filter your Seach by People and use any one of us. I'd start with Jeff Bellune and look for the more recent dates.
Good luck,
Hunt

How do you combine videos from different cameras

Hi there,
I would like to be able to combine video clips taken of the same event with different cameras in such a way that they all share the same audio.
I have recorded my daughter's entire theater play with a camera in the back of the hall connected directly to the theater's audio equipment. Thus, I have the entire audio in high quality in one huge clip. Then I and a couple of other parents have recorded the play with a number of additional cameras. I would now like to put together a project with video clips from the other cameras using the audio of the first. Obviously, the timing is critical here.
How can I replace part of just the video of a clip with the video of another clip without affecting the audio and making sure that the part that I replace is of the exact same length as the part I insert? How can I then finetune the location of the replacing part so that it fits to the audio?
Thank you very much for any help you can provide.
Best regards,
Marcus

Hi AppleMan,
this is also a very helpful hint, thanks!
This has been quite an experience and wasn't as easy as I had hoped. May I add two additional hints in the hopes that someone else will find them useful:
* When taping an event with several cameras make sure that all cameras are set to the same time. This makes iMovie sort them in roughly the right order and makes it much easier to find the clips you want.
* When trying to overlay one short clip over another longer one (using the audio of the longer clip) it is helpful to have several extra frames on the left and right of the clip. With the "Trim" menu item one can then more precisely determine exactly which part of the clip to insert. With the Shift-Arrow Keys one can then easily shift the entire clip by individual frames without changing the length of the clip.
Best regards,
Marcus

No Audio with AVI Files from Digital Camera

Hey, everyone. I'm having A LOT of trouble playing videos (AVI) from my Samsung L730 digital camera. Other AVI's on my computer work just fine. However, the ones from my camera will show only video.....but NO audio in Quicktime. It is the same problem in VLC as well. I've tried the "GarageBand trick", as well as the Audio MIDI setup adjustment.
I've searched other discussions for solutions...and have had no success. I have the following codecs in my /library/quicktime folder:
AC3Codec.component
AC3MovieImport.component
AppleHDVCodec.component
AppleIntermediateCodec.component
AppleMPEG2Codec.component
AppleProRes422.component
DesktopVideoOut.component
DivX Decoder.component
DivX Encoder.component
DVCPROHDCodec.component
DVCPROHDMuxer.component
DVCPROHDVideoDigitizer.component
DVCPROHDVideoOutput.component
DVCPROHDVideoOutputClock.component
DVCPROHDVideoOutputCodec.component
FCP Uncompressed 422.component
Flip4Mac WMV Advanced.component
Flip4Mac WMV Export.component
Flip4Mac WMV Import.component
FLV.component
IMXCodec.component
LiveType.component
Perian.component
XVIDDelegate
I'm running Leopard and Quicktime 7.4.5. Have tried looking for codecs provided by Samsung, but have found nothing. Please help me...I'm about to pull my hair out. Haha.

I'll add the suggestion to try any, or all, of these that might help to play them properly:
VLC
Perian
Streamclip

How to import 4K files from new camera JVC GY-HMQ10E in Adobe Premiere Pro CS5 ?

Importing in RED format or other ?

I have used a MacMini to download the 4K content (only short clips were willing to download sofar), and then transferred to a PC I was able to get it to play in RED schemes in Adobe Premiere Pro CS5.
I am just not sure if this is the right way of doing it.
My current concern for anyone with experience with this camcorder:
How can we download/combine from the 4 SD cards the longer clips too on Windows?
I saw a utility but had some extra requirements that I couldn't figure out yet.
On my MacMini only the short clips were willing to download.

How to Write a file from hex format to another format

hi I am trying to create a file (IBM AFP-printer format) from the hex file which i have created after reading that IBM afp file. Now i have to do some changes in that hex file data and store it back to the same format.
I have tryed storing it using:
Writer out = new OutputStreamWriter(outputStream,"Cp1252");
but it is taking hex format only.
I have checked encoding of afp file by this code
File inputFile = new File( "C:\\ACode\\new2.afp" ) ;
FileInputStream inputStream = new FileInputStream(inputFile );
InputStreamReader in = new InputStreamReader(inputStream);
System.out.println(in.getEncoding());
it is showing Cp1252 only.
But i am unable to store it back to same format
Thanks

I don't really know what the IBM APF stream format is, but I suspect that your approach is not right. If you really want to read and write raw hex bytes, then do not use readers and writers; instead use pure streams. The reason is that readers and writers are designed to deal with character-oriented data, and will automatically perform translations on input and output.
On the other hand, if you could find the correct encoding/decoding software for the IBM format in question, well then readers/writers would be fine, and you could do all of your "internal" work in unicode.

PSE10: how to download Raw files from Canon camera? [was:HELP]

How do I download RAW images from a connon camera on photoshop Elements 10??

is your issue resolved now?
~Surendra
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

How to write into file from xml dom Object

Hello,
I try to transform my xml DOM document object into
file. I try the following:
try {
          // Prepare the DOM document for writing
          DOMSource source = new DOMSource(newDoc);
          // Prepare the output file
          File file = new File(myHomeRep + "btLom.xml");
          StreamResult result = new StreamResult(file);
          // Write the DOM document to the file
          Transformer xformer = TransformerFactory.newInstance().newTransformer();
          xformer.transform(source, result);
          } catch (TransformerConfigurationException e) {
          } catch (TransformerException e) {
But my file is empty.
I do it with some wel formed xml tree document, thus I am certain
that the xml tree exists.
Could you explane me please what I am doeing wrong,
or is there are some possibility to make from my xml dom object
a file.
In advance much thanks,
Julia

Here's one thing you are doing wrong:} catch (TransformerConfigurationException e) {
} catch (TransformerException e) {
}With this code, if an exception occurs then you are guaranteed to know nothing about it. At the minimum do this:} catch (TransformerConfigurationException e) {
e.printStackTrace();
} catch (TransformerException e) {
e.printStackTrace();
}

How to generate trace file from different session?

I have a cron job which starts several Oracle stored proc (Oracle 9.2). I want to generate a trace file when the job is running. I know I can use this alter session command before I start this job. But this is my session not the job session. So this command won't generate trace file for job's session.
ALTER SESSION SET EVENTS '10046 TRACE NAME CONTEXT FOREVER, LEVEL 8';
Appreciate any ideas.
Thanks.
S.

Easiest way is to use database control/grid control - click trace session button!
The 'old fashioned way is'
begin
DBMS_SYSTEM.SET_SQL_TRACE_IN_SESSION(SID,serial#,TRUE);
end;
find sid and serial# in a select from v$session
There are other ways too but this is probably the easiest.
You'll need appropriate privileges to run this .
Cheers,
Harry

How do I back up AVI files from my iPhoto library to a CD or DVD? I

I am using iPhoto 8 , exporting album, save as jpegs named sequentially. I did not think about the avi files from my camera, that are now on the cd or dvd as jpegs. I'm doing this as I want the original files, not just the iPhoto library and plan to reinstall on a new Mac.

Create a smart album with either of one of these criteria: Kind is Movie or File Name conatins .avi. Then select all of the movies and export them to a folder(s) on the desktop via File ➙ Export ➙ File Export with Formate = Original. This will get the movie files into folders ready to be burned to disk.
OT

How to write 3 AVI files from 3 different cameras connected to 3 PCI 1411's?

Similar Messages

Maybe you are looking for