How to write text vertically in an table cell?

Is it possible to make a table cell where the
text would be written along a vertical base line?
I found how to make a text box and rotate it
vertically.
How may I place such a text box in a table cell?
dan    

Hello daniel,
if the table will not be resized or repositioned a lot, the best way to display what you want to have is to create a textbox with the styles and adjustments you need, rotate it and place it over the table cell. Be sure to make the cell big enough to pretend the text of the textbox would be inside of it. The textbox has to be a fix positioned object in the top layer.
It's only a work-around, but the best you can achieve.
Frank.

Similar Messages

  • How do I make text vertical in a table

    How do I make text vertical within a table using pages '09?

    You need to type the text in a Textbox, turn off text wrap, rotate that 90° using the Metric Inspector then position it over the cells you want the text vertical.
    Peter

  • How to display TEXT vertically in SMART FORM

    Hai,
    I need to display the column name of a table vertically (readable from bottom to top) in smart form.
    Could any one please tell me how to do this?
    Thanks & Best Regards,
    Maniyam Bhaskar.

    Hi,
    Go through these threads for the discussions happened on similar issue... hope it helps you..
    how to print text vertically in smart forms
    vertical and horizontal printing in same page with smartforms or sapscript
    Good luck
    Narin

  • How to print text vertically in smart forms

    hi,
    Can any one tell how to print text vertically in smartforms
    ADVANCE THANKS
    GUHAPRIYAN

    HI,
    Chk out  this thread.Maybe it proves helpful.
    Re: vertical writing in smartforms
    Regards,
    Gayathri

  • How to draw text vertically, or in an angle

    please help me how to draw text vertically, or in an angle

    I robbed the framework from Dr Las or 74phillip (don't remember which) ...
    import java.awt.*;
    import java.awt.geom.*;
    import javax.swing.*;
    import javax.swing.event.*;
    public class AngleText extends JPanel {
      private int      degrees = 16;
      private JSpinner degreesSpinner;
      public AngleText () {
        setBackground ( Color.WHITE );
      }  // AngleText constructor
      protected void paintComponent ( Graphics _g ) {
        super.paintComponent ( _g );
        Graphics2D g = (Graphics2D)_g;
        g.setRenderingHint ( RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_ON );
        AffineTransform at = AffineTransform.getRotateInstance ( Math.toRadians ( degrees ) );
        Font f =  g.getFont();
        g.setFont ( f.deriveFont ( at ) );
        g.drawString ( "Rotating Text!", getWidth()/2, getHeight()/2 );
        g.setRenderingHint ( RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_OFF );
      }  // paintComponent
      public JPanel getUIPanel () {
        SpinnerModel degreesModel = new SpinnerNumberModel (
                                      degrees  // initial
                                     ,0        // min
                                     ,360      // max
                                     ,2        // step
        degreesSpinner = new JSpinner ( degreesModel );
        degreesSpinner.addChangeListener ( new DegreesTracker() );
        JPanel panel = new JPanel();
        panel.add ( degreesSpinner );
        return panel;
      }  // getUIPanel
      //  DegreesTracker
      private class DegreesTracker implements ChangeListener {
        public void stateChanged ( ChangeEvent e ) {
          Integer i = (Integer)((JSpinner)e.getSource()).getValue();
          degrees   = i.intValue ();
          repaint();
      }  // DegreesTracker
      //  main
      public static void main ( String[] args ) {
        JFrame f = new JFrame ( "AngleText" );
        f.setDefaultCloseOperation ( JFrame.EXIT_ON_CLOSE );
        AngleText app = new AngleText();
        f.getContentPane().add ( app );
        f.getContentPane().add ( app.getUIPanel(), BorderLayout.SOUTH );
        f.setSize ( 200, 200 );
        f.setVisible ( true );
      }  // main
    }  // AngleText

  • How to write text file in Shockwave?

    Does anybody know how to write text file in Shockwave to
    user's disk?
    Thanks in advance.

    Those Xtras can wreak to much havoc when used with the wrong
    intent.
    What you can do is write with setpref and store a list of
    saves and the
    saves itself seperatly. Then you'd have to build your own
    save/open
    dialog to let the user:
    * pick a previously saved file to load or overwrite
    * have the user type the name of a new file to save.
    Only thing that remains is that the user cannot decide where
    the files
    are saved.
    Manno
    SiuLinda wrote:
    > Thanks a lot for your reply.
    > Yes, cookies is good but I have to write a program to
    save the text file in
    > where the user wants, user can open these files later if
    they like, like using
    > Filextra and Fileio, but I found all of these xtras seem
    to be not supported in
    > shockwave.
    >
    Manno Bult
    [email protected]

  • How is it possible to split the table cells in Pages, Version 5.1

    How is it possible to split the table cells in Pages, Version 5.1?

    This is a feature removed in the change from Pages 09 to Pages 5.0.1.
    If you need this facility, revert to Pages 09.  If you upgraded to 5.0.1, then the earlier version is still in your Applications folder in a folder called iWork.

  • How to load text data into internal table

    I have a text file to load txt data into internal table. So how to read text data with validation and to load all text data into the internal table?
    Say this is the text file:
    IO_NAME, IO_TYPE, IO_SHTXT, IO_LONGTEXT, DATATYPE, DATA LENGTH
    ZIO_TEST1, CHA,      IO TEST1,      IO TEST 1,        CHAR,         20
    ZIO_TEST2, CHA,      IO TEST2,      IO TEST 2,        CHAR,         20
    Regards,
    Mau

    Hi,
    U can use GUI_UPLOAD for this...
    Declare an internal table like
    data: begin of itab occurs 0,
    string(1200),
    end of itab.
    check the sample code:
    cange as you need
    DATA: DATEI_PC TYPE STRING VALUE 'C:\MATNR.TXT'.
    DATA: BEGIN OF ITAB occurs 0,
    TXT(1024),
    END OF ITAB.
    CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_UPLOAD
    EXPORTING
    FILENAME = DATEI_PC
    FILETYPE = 'ASC'
    CHANGING
    DATA_TAB = ITAB[]
    EXCEPTIONS
    FILE_OPEN_ERROR = 1
    FILE_READ_ERROR = 2
    NO_BATCH = 3
    GUI_REFUSE_FILETRANSFER = 4
    INVALID_TYPE = 5
    NO_AUTHORITY = 6
    UNKNOWN_ERROR = 7
    BAD_DATA_FORMAT = 8
    HEADER_NOT_ALLOWED = 9
    SEPARATOR_NOT_ALLOWED = 10
    HEADER_TOO_LONG = 11
    UNKNOWN_DP_ERROR = 12
    ACCESS_DENIED = 13
    DP_OUT_OF_MEMORY = 14
    DISK_FULL = 15
    DP_TIMEOUT = 16
    NOT_SUPPORTED_BY_GUI = 17
    ERROR_NO_GUI = 18
    OTHERS = 19.
    IF SY-SUBRC NE 0. WRITE: / 'Error in Uploading'. STOP. ENDIF.
    WRITE: / 'UPLOAD:'.
    LOOP AT ITAB. WRITE: / ITAB-TXT. ENDLOOP.

  • How to justify text vertically in multi-column frame

    How do I justify text vertically in a multi-column frame but within the baseline grid?
    Working at a very busy publication, fitting text evenly in multi-column text boxes are crucial to be done quickly! I understand that it can be done manually by adjusting the tracking in order to force the text to end evenly on bottom. However I'm looking to achieve that result automatically, pretty much like the "Justify Vertically" feature except by doing so it spreads the last column lines out, but I need to keep the text on the grid.

    You can ask over in scripting: InDesign Scripting

  • How to align text vertically?

    This seems like it should be really easy: On a simple text slide, how do I align multiple lines of text vertically? Do I have to eyeball it, or is there a way to fix it exactly in the center, top to bottom?

    Hi -
    There is no automatic way, but there is a way to make it slightly easier.
    After you enter your text, grab the clip of type and move it to a portion of the timeline where there are no other clips.
    In the Canvas click on the button on the top right and select Checkerboard:
    !http:/www.spotsbeforeyoureyes.com/CanvasCheckerboardBG.jpg!
    This will make the background a checkerboard so you can count the squares to verify the top and bottom line are equidistant from the TV Safe Guidelines:
    !http://www.spotsbeforeyoureyes.com/CanvasCheckerBoardExample.jpg!
    When you are done positioning the type, grab the clip and place it above the clip you originally wanted it to appear over.
    You can either leave the Canvas set to display a checkerboard when there is no video present, or switch it back to Black.
    Hope this helps.

  • How to add text vertically into a Word margin with C# (using namespace: Microsoft.Office.Interop.Word)

    I need to add text vertically in a word document outside the margins.  How can I do this with Microsoft.Office.Interop.Word and C#?
    Leonard Swarczinski Software Developer Postal Center International

    Hi Leonard,
    According to your description, do you want to add text vertically into Page Header/Footer? I wrote a sample  for you.
    using Microsoft.Office.Core;
    using Microsoft.Office.Interop.Word;
    using System;
    using System.Collections.Generic;
    using System.Linq;
    using System.Text;
    using System.Threading.Tasks;
    namespace AddTextToWord
    class Program
    static void Main(string[] args)
    CreateNewDocument();
    Console.ReadLine();
    private static void CreateNewDocument()
    Object oMissing = System.Reflection.Missing.Value;
    Microsoft.Office.Interop.Word.Application oWord;
    Microsoft.Office.Interop.Word.Document oDoc;
    oWord = new Microsoft.Office.Interop.Word.Application();
    oWord.Visible = true;
    oDoc = oWord.Documents.Add(ref oMissing, ref oMissing, ref oMissing, ref oMissing);
    String HeaderText = "Hello everyone!";
    WdParagraphAlignment wdAlign = WdParagraphAlignment.wdAlignParagraphCenter;
    AddHeader1(oWord, HeaderText, wdAlign);
    private static void AddHeader1(Application WordApp, string HeaderText, WdParagraphAlignment wdAlign)
    Object oMissing = System.Reflection.Missing.Value;
    WordApp.ActiveWindow.View.Type = WdViewType.wdOutlineView;
    WordApp.ActiveWindow.View.SeekView = WdSeekView.wdSeekPrimaryHeader;
    Microsoft.Office.Interop.Word.Shape textBox = WordApp.ActiveDocument.Shapes.AddTextbox(MsoTextOrientation.msoTextOrientationVertical, 150, 10, 40, 40);
    textBox.TextFrame.TextRange.Text = HeaderText;
    WordApp.ActiveWindow.View.SeekView = WdSeekView.wdSeekMainDocument;
    If I misunderstood or anything wrong, please let me know and you can get more information from below articles.
    Office development in Visual Studio
    http://msdn.microsoft.com/en-us/office/hh133430.aspx
    Abhout: AddTextbox Method
    http://msdn.microsoft.com/en-us/library/office/aa171543(v=office.11).aspx
    How to: Programmatically Insert Text into Word Documents
    http://msdn.microsoft.com/en-us/library/vstudio/6b9478cs.aspx

  • How to write two triggers on same table how it works?

    Hello sir..
    I have to write two triggers on same table for auditing different columns of different pages (may be different modules).
    I will have an audit table in which i will insert data such as (user_id,module_id,column_name,old_col_val,new_col_ val,timestamp)
    Now different users from different pages will update the data on same table may be same columns!
    If we write directly, we will not be able to know which column is updated from different pages.
    My question is how can we control the triggers to raise based on the pages

    A trigger is executed whenever the table is inserted / updated / deleted (depend on trigger definition). It won't know what 'page' caused the operation. You can prepare a trigger for one page.
    In order to fulfill your need, you need some way to tell the trigger where you are. There are many ways to accomplish this. Some possible methods are (please check the documents for detail)
    DBMS_SESSION.SET_IDENTIFIER
    DBMS_APPLICATION_INFO.SET_MODULEFor example, you can call DBMS_SESSION.SET_IDENTIFIER to set an ID from your page, and then call sys_context to read the ID back:
    In Page:
    exec dbms_session.set_identifier('Page1');
    ...In Trigger
    pageid  := sys_context('USERENV', 'CLIENT_IDENTIFIER') ;
    ...Note that if you use a connection pool, you may need to properly reset the session information before return, in order to avoid messing up the session information when the connection is used next time.

  • How to pass Text Lines to z-table..?

    Hi All..
    I have a custome screen, where user inputs text of length 250 Char.
    How to pass this value to Z-table, where i have created a Field with CHAR type and 250 Length..???
    Pavan

    Hi,
          Use below logic.
          data itab like ztable occurs 0 with header line.
          itab-text = screen-text.
            append itab. 
          insert ztable from table itab.
    Regards,
    Amole          
    Regards
    Amole

  • Hi how to write text file continuosly

    hi i know how to write a text file but if i write something and close the
    whole program, then when i open the program and do the samething,
    i wanna write something contiguosly, write the next line of the very last saved line..
    but..i tried couple of times,but the written sentence just overlapped,,,and
    can't write continuously,,,
    how to solve it............

    Are you saying you want to create a file the first time you run a program, and append to the file the second time? If so, check the constructors for the class you are using to write the file. There should be one that takes a boolean flag telling it you want to append instead of overwrite. Set the flag to true.
    For example:
    http://java.sun.com/j2se/1.5.0/docs/api/java/io/FileWriter.html#FileWriter(java.lang.String, boolean)FileWriter(String fileName, boolean append)
    Constructs a FileWriter object given a file name with a boolean indicating whether or not to append the data written.

  • How to insert text data into temp tables....

    Dear All,
    I have one notepad with three columns, first column is segment1, second column is segment2 & third column is price list....
    and there is no delimiter and exact spaces..(i.e, zizak fomat)
    Ex:-
    xx yy 00009999
    kk mmmm 00009333
    Data is available like above example...So, I need to insert this data into one table.(2LAKSHS OF RECORDS AVAILABLE IN THAT NOTEPAD)
    So, Any can one help me, how to insert this kind of text data into temparory table...
    Regards
    Krishna
    Edited by: user12070109 on May 29, 2010 9:48 PM
    Edited by: user12070109 on May 29, 2010 9:49 PM

    Hello,
    What manu suggested this can be done through oracle forms.
    If as i read your last post you are using that in database it will not work in db. Try to use the same process in oracle forms will work by making some changes.
    And if you don't want to use forms then there is one way using SQL LOADER. It required control file to execute for uploading data.
    See the below link.
    http://www.orafaq.com/wiki/SQL*Loader_FAQ
    In this example its showing filename.csv you can use your file name like yourfilename.txt.
    So your control file will look like this...
    load data
    infile 'file_path\file_name.txt'
    into table table_name  -- use actual table name where you want to upload data
    fields terminated by " "  -- Here using spaces as you mentioned           
    (column1, column2, column3)  -- Here use the three column names of tableAnd after creating control file with the above code. You can call it in command prompt like this
    sqlldr username/password control=control_file_path\control_file_name.ctl log=log_file_path\log_file_name.log
    or
    sqlldr username/password@dbconnection control=control_file_path\control_file_name.ctl log=log_file_path\log_file_name.log
    Before doing this practice make sure SQLLDR.exe availabe in the machine where you have to execute. Otherwise you will have to install db client for using sqlldr.exe
    -Ammad

Maybe you are looking for

  • BSP screen in edit mode

    Will i be able to create a BSP screen in edit mode?Or can i be able to create a material(MM01) from BSP screen.

  • Parameter in Crystal Report 8.8

    Dear Experts, I'm creating a stored procedures with few parameters. When I preview the report using Crystal Report 8.8, i can set parameters to NULL and the stored procedures will know to capture all information without any filtering. But when i Prev

  • Help! making a simulation of a Roulette game

    First, the user is prompted for how many spins of the wheel that will be bet on. The application should use the Math.random method as the basis for computing the number that would be spun on the wheel. It should then compare this number to the variou

  • Wish new backlight option

    I mainly use my iPod (4th gen 20Go) in my car with the Dension car adapter. It would be very helpful to have an other option for activating the backlight. I would like to have the backlight turned on everytime a new song start. This way, I would be a

  • Where can I find the driver for PCI-GPIB drivers for Windows XP

    We have PCI-GPIB cards work well under Win2k Pro and WinME, but when we try to mount the card to a WinXP machine and install the same driver as used under Win2k, and whenever I try scan instruments in Measurement & Automation, the system crashes and