How Unlink Master Pages from Each Other

When I create a new master page, even if it isn't based on an existing one, changes I make in the order of layers in that master page are applied to the other master pages as well. And when I change the order of layers in other master pages, the order changes in the new one. Please help me unlink these. I've found mentions that this can be done, but not specific instructions for how. Thank you!!!!

On your new master page, Shift+Command+Click on the item you want to change. You can then drag it to a new layer from within the layers pallet by dragging the colored dot next to the layer it's currently on to the layer you would like it to be on.

Similar Messages

After installing ios 6 to my iphone4 and my daughters iphone4s we now get each others text messages. How can we disconnect from each other so that I don't receive the text messages from her and her friends and she does not receive mine?

After installing IOS6 on my iphone 4 and my daughters iphone 4s we have this wonderful connection that we would like to break. We are now seeing/receiving each others text messages. I love my daughter but I don't really want to get all of her text messages from her friends and I don't really want to read every response she sends. Additionally, she can also see my text messages and there are times I really don't need for her to know everything that I am doing.
So It is time to cut the cord we need our own seperate texting. I am not sure what we did to have this happen but how do we undo it?

Get your Apple ID sort out.
Only use the same Apple ID in Settings > iTunes & App Stores to share purchases, no where else.
Here some tips, it was written for IOS 5 but it's still valid for iOS 6.
iOS 5 & iCloud Tips: Sharing an Apple ID With Your Family

How to hide different Viual Studio Projects from each other in one TFS Team Project with areas?

Hi,
at the moment I try to set up a "good" architecture for projects in TFS for our company.
As often mentioned in TFS documentation we try to reduce the number of Team projects in our company which is organized in different business units (BUs).
One great Team project shall contain a number of different Visual Studio projects, each one belonging to a separate BU.
The grouping is as follows:
Global Team project
       Business Unit A
                     Visual Studio Project A1
                     Visual Studio Project A2
       Business Unit B
                     Visual Studio Project B1
                     Visual Studio Project B2
The programmers in business unit A must not see the Visual Studio projects of Business Unit B, but both groups (A an B) use the same process model (that is the reason why we try to group them in on team project).
I try to put all the projects from both BUs in one TFS team project and separate them logically by an Area hierarchy like mentioned above.
But areas only separate work items from each other, not Visual Studio projects.
In Source Control Explorer I can only assign security issues on team project level (Global Team Project), not on business unit level.
So every developer in BU A can see the Visual Studio projects in BU B...
How can I model these dependencies?
Regards and thanks
Lothar

Hi Lothar,
Thanks for your post.
What’s the version of your TFS and VS?
In Source Control Explorer, you can right-click on Business Unit A folder and select
Advanced>>Security… to deny other group(s)’ access permissions on this folder. Then use the same way to set permissions on Business Unit B folder too.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can i design square signal which having a positive and negative values equal to each other and separated from each other by controlled time or distance

How can i design square signal which having a positive and negative values equal to each other and separated from each other by controlled time or distance, As it is shown in the figure below. and enter this signal in a daq.
Solved!
Go to Solution.

By the time you spend for the nice diadram you might have done the vi
Your DAQ like to have a waveform (array of values and dt ak 1/samplerate)
If you set the samplerate you know the array length , create a array of zeros, and set the values of both amplitudes ...
Since I don't want to wire others homework here are some pictures
And there are some drawbacks is room for improvement in my solution, just think of rounding errors ... and what might happen if the arrays get bigger ....
Spoiler (Highlight to read)
Greetings from Germany
Henrik
LV since v3.1
“ground” is a convenient fantasy
'˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'

I gave my Mom new iPad - she's forgotten her pass code. She has now been locked out and told her "iPhone is disabled". How do I help her? We are 2 provinces away from each other!

I gave my Mom an iPad. She has created an Apple ID (twice) and forgotten her pass code. She has now been locked out and told her "iPhone is disabled". How do I help her? We are 2 provinces away from each other!
She is 75 and frustrated! How do I walk her through this?
Diane

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

Replace vertical navigation in custom master page from snippet gallery

Hi.
I'm creating a new master page from seattle.master and I'm trying to implement a customized snippet from the snippet gallery into the master page code without success. The following line is straight from a seattle.master page:
<div id="sideNavBox" class="ms-dialogHidden ms-forceWrap ms-noList">
From here, I see where I think the replacement snippet should go; however, there are discrepancies between the structure of the snippet and the code I'm replacing. Also, the snippet from the gallery is calling some ASP registrations that I
don't see in the original master page code.
How can I insert my custom vertical navigation snippet into this master page?

Hi,
You want to replace the entire <div id="sideNavBox" /> found in your custom HTML Master Page. Your custom vertical navigation will need to replace the entire container and all of its child controls.
Your custom vertical navigation snippet should start similar to:
<div data-name="QuickLaunch">



<div id="sideNavBox" class="ms-dialogHidden ms-forceWrap ms-noList">
Design Manager's snippet manager adds the Register tags into the snippet so that the snippet is self-contained. Your HTML Master Page likely contains these Register tags already but you can leave them as Design Manager will handle any duplicates for you.
The structure of the snippet itself appears different because the seattle.html HTML Master Page includes modifications.
Eric Overfield - PixelMill -
ericoverfield.com -
@EricOverfield

When my husband and I try to share our libraries and import from each others libraries, we get as far as seeing the library on the screen. The next step is to look for the 'Show' menu at the bottom of the screen, but neither of us has any such thing. ?

When my husband and I try to import from each other's libraries, using Home Sharing, we are intructed to look for the "Show" menu at the bottom of the screen. Neither of us has anything like this on our screens. How and where do we locate it? We both have the latest itunes running.

Hey fantail163,
If you are not seeing the button to show menu, try out the troubleshooting steps for Home Sharing.
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Copy single master page from one document to another?

The answer to a previously posted question seems to involve creating a document differently (than I had). A lot of work went into the creation of the master pages in the original document which I will now need to recreate in the new document. Is there a way I can copy one master page from one document to another?
Many thanks,
Theresa

There are a number of ways to do this.
Create a copy of the document you want to copy the Master page from. Delete all pages except for the one you want (but you have to leave Right and Left alone as FM must always have these two pages available).
Open the new document and the one that you want to import the master pages from.
In the new document:
Import from Document: (select the document with the Master Page that you want)
then
File > Import > Formats
and select Page Layouts only.
Note that Right/Left always come along for the ride.
Alternative and probably best way to get a single Master Page:
In new document, add a new Master Page and select "Empty".
In the old document, on the desired Master Page, Select All on page (ctrl+A) and then copy (ctrl+v).
In the new document on the new master page, paste (ctrl+v) to add the layout. Note: you may need to rotate the page first if it isn't in the same orientation as in the old document.

Can I copy a Master Page from one document to another?

Hi - this might be a basic question, but I haven't figured out the answer yet. I have one .muse site with a Master Page that I used... I want to use that same Master Page on another .muse site that I'm working on. Is there a way I can copy the Master Page from the finished site into the other one that I'm working on?? Any help is appreciated.
Thanks,
Blair

Hi Blair,
You should be able to do this by simply selecting (Ctrl+A) and copying (Ctrl+C) all content of the Master page of Site1 and Paste in Place (Ctrl+Alt+Shift+V) in the Master page of Site2.
Thanks,
Vinayak

Exclude Master Pages From RH8 Search

Is there a way to exclude master pages from RH8 searches? There is no option in the Master Page properties as with topics.
What I did: I created a Master Page to add a "Download PDF version" link to the PDF version of the Help, in the same way that RJ Jacquez did in his "Web 2.0 Documentation using Adobe AIR and RoboHelp 8 OnDemand Recording" tutorial. The difference is that Jacquez's sample used an image as the link, while I used text.
Problem: "Download PDF version" is prepended to all search results (in the context line).
The obvious workaround is to replace the text with an image representation instead. But I thought I would ask the question about master pages and searches anyway.

Hi Jason
I think you misunderstood me. Note that Master Pages may be used in different ways.
They may be used as a starting off point for a topic. You create the topic, and much like a Word template, the Master Page partially builds the topic by having certain elements already in place. From there forward, you customize the topic to your needs. Subsequent changes to the Master Page have zero effect on any topics created from them.
They may also be used to configure a Header and a Footer. You then associate the Master Page with the Header, Footer or both to several or all topics to give the associated topics the Header or Footer information from the Master Page. In this case, subsequent changes to the Header or Footer in the Master Page DO actually appear in all associated topics.
I was talking about the latter option. I wasn't suggesting you move things into the HTML Head area of the topic.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Isolating guest VMs from each other (not just the host)

Hello Everyone,
I've been playing around with visualization for a long time, but largely for testing and educational purposes.
For the first time I'm thinking of actually running some production systems in virtual machines instead of on physical hardware which which raises some new concerns for me that weren't really relevant previously, namely, security. In particular, I've been thinking about how to isolate the guest VM processes from each other.
It's decades-old best practice to isolate different server services to different machines to help prevent, say, security problems with your web server also comprising your mysql server. When you start virtualizing your infrastructure, you lose this benefit to a degree, if someone manages to compromise one of your VM servers and manages to exploit a vulnerability in your hypervisor to gain access to the host, it's no big leap to assume that they may be able to get access to your other virtual machines running on that host.
It seems to me, that if you want to improve your resilience to this kind-of exploit that you want to increase the isolation of your VM processes from each other. You could, say, run them as different users. If you're careful about permissions, then you gain back some of the security of running your servers on seperate physical hardware. An attacker could still exploit a local privilege escalation bug, but it at least provides another line of defense.
This sort of thing seems to be possible with qemu virtual machines, though it does require some work to get anything besides user mode networking working.
On the other hand, this sort of thing seems to be largely impossible with libvirt. It's possible to run as qemu vms as different users using 'qemu://session' but the documentation seems to suggest that this limits you to using the qemu user mode networking, which isn't practical for running publicly accessible servers. Since, as far as I can tell, all of the visualization management products around are based off of libvirt, this surprises me. It seems to me that someone would have wanted to try and do something like this before, but nobody has (as far as I can tell).
Indeed, there seems to be very little documentation out there about using qemu with tun/tap networking when running as non-root user. There is some documentation out there about using VDE (mostly via the deprecated vdeq wrapper), but alot of qemu write-ups skip over it. There's enough out there to suggest it's possible, it just doesn't seem to be written up anywhere (yet, maybe I'll write it up myself someday).
So, this makes me wonder, 'why not?'. Are there other things people are doing to isolate guest VMs from each other?
What are people running production services in VMs doing?

I suppose this is also something to think about, but I don't think I'd be that worried about it for my use-case. The majority of systems I plan to run could run completely headless and the physical security for the host computers should be pretty good. I'm more concerned remote code exploits in one particular VM allowing an attacker to execute on the host or in other guest VMs.

Can the 12 Ports of the PCI 6508 set independent from each other to I and O?

Hello,
can the 12 Ports of the PCI 6508 set independent from each other to I and O?
Or are they configured in groups like A, B and C ports?
Thanks,
BFutzi

The attached example demonstrates how to write a digital pattern to multiple ports with a single write call, overcoming the 32-line limitation of the DIO Port Write VI.
Attachments:
Write_to_Multiple_Ports_(6507-6508).vi ‏49 KB

I have 2 different MacBooks (owned by 2 people) connected to my Time Capsule. I want to use the Time Capsule to back up both MacBooks separately from each other. Can one person access the hard drive of the other person, on the same Time Capsule?

I have 2 different MacBooks (owned by 2 people) connected to the same Time Capsule over a wifi network. I want to use the Time Capsule to back up both MacBooks separately from each other. Can one person access the hard drive of the other person, on the same Time Capsule? Is there a way to ensure that the files on the 2 laptops are kept private from each other? Thanks!

If someone really wants to do something, it won't take them long to find out how to do it.
http://pondini.org/TM/17.html
Security on a Time Capsule is a bit like installing a lock on a tent. It will keep the honest folks out, but probably not the others.

We have 2 email accounts on our Ipad and want to password protect them from each other?

We have 2 email accounts on our Ipad and want ro password protect them from each other.I cannot see how tomdo this.

The only way to get around this would be if you could access each of those e-mail accounts via web mail. You can put a shortcut on the screen and then enter the login info for each one. Everything would be viewed on a web basis and nothing should be downloaded to the ipad itself. (beyond being in safari's history)

How would 2 people call each other using facetime if both were in a foreign country but staying at different locations within that country?

How would 2 people call each other using facetime if both were in a foreign country but staying at different locations within that country?

It's tied to the Apple ID also - I believe it would use that to find the right person/device.
Perhaps this article would help: http://support.apple.com/kb/HT4319. It looks like you may want to go in through your contacts and make the call.
If you're concerned about data charges, put your phone in Airplane mode before trying to Facetime. That will prevent it from trying to make a call over your cellular data.
~Lyssa

How Unlink Master Pages from Each Other

Similar Messages

Maybe you are looking for