How update Fund Center and Commitment Item after posting

hi Experts,
Funds management was activated during the year and hence there are few open items saved without capturing Fund Center and Commitment Item. When i tried to clear these open item i get the following error
Line in document xxx xxxxxxxxxxxx does not contain any commitment items
Is there any program which i can use to update derivation to the already posted line item
Thanks in Advance

Hi,
Solutions proposed by Alexey are good if FM document was created for the FI documents in question. If, however, no FM document was created, reassignment process won't help. You can try FMN0 transaction after creating a derivation rule in FMDERIVE for these documents, but I cannot confirm that it would be sucessful as FMN0 transaction is not perfect.
The solution could be updating FI tables (BSEG/BSIS/BSAS) with FM assignment (fund centre/commitment item) and only then running FMN0 transaction. In this case, FM document will be created and you'll be able to process the items.
Regards,
Eli

Similar Messages

MM-FM integration. How to stop update of Fund Center and Commitment Item

Hello!
Anyone please help. MM-FM integration.
Our problem is after automatic creation of PR and PO from work orders, and the fund center and commitment item in the PR and PO has been changed/updated by the user, and then we change something in the work order and save it, the fund center and commitment item of the PR and PO goes back to default value (based on FMderive). Is there a way to stop this?
Thanks in advance for your help.
Regards,
Rona

It seems like you have selected "Do not overwrite target values" option in both Funds Enter and Commitment Item in the derivation rule defined.
Go through SAP Note 666322, make sure the Trace feature in On and then choose the option "Overwrite Target Values" in both Funds Enter and Commitment Item in your derivation rule. After that, see the Difference before and after values in the trace log created after performing the derivation rule.
I am sure this will help.
Regards,
Amar Lal

Fund Center and Commitment Item

Hi All ,
What is the Fund Center and Commitment Item also the use of it.
regards
sunil

The fund center is the budget which is issued by the managemnet for the specific area (cost center) . The same will be released in each periodical wise as per decision taken.
Example Maintenance team has one fund center. So all the times for his expenses the fund will be deducted from provision. Basically it is linking with cost center.
The commitmenet item comes under the fund center. It menas that you may have repair& services, Labour charges, spares etc. each commitment item has own budget value under your fund center. exaplme if you are taking the spares your spares budget will deduct.
I think u got something, but for explation here is not possible since its big subject.

Static Fund Center and Commitment Item

Dear All,
We have recently implemented Funds Management in our organisation and there are a few issues due to corrections in the account assignment derivation data by the user.
We have a derivation strategy that gets the Funds Center and Commitment Item values from the GL/Cost Center combination.
Now, the user frequently changes the cost center as there is little clarity with regards to which cost center should the assigned costs go to.
Now when the user enters the Cost Center and the GL the first time, the FC and CI get populated in the PR - fine till now...But when before saving the PR, he changes the cost center, the new assignment does not get picked up. The budget consumption too happens in the old fund center and commitment item corresponding to the first entered cost center / gl combination.
We ran a trace and we found that the trace has the new cost center in it, but the old funds center and commitment item, with the explanation that "None of the target fields are to be derived."
We have given account assignment as changeable in the cost center (K) account assignment. And the FC and CI are in the optional mode with the account assignment.
Is there any way by which the FC and CI value gets picked based on the latest changes and not on the last held data ? Or any user exit that might get the values from the FMDERIVE each time the data is entered and the return key hit ?
Thanks and Regards,
Wy.

Hi Aleksey,
Thanks for the note !
Looks like the note was implemented already for a previous storage location-based development.
We have now made a change to the existing path - the existing FC/CI values are deleted first and the new values picked from FMDERIVE everytime we hit 'ENTER' or 'SAVE'.
This way, every change to the PR has the FMDERIVE check, and the values are indirectly refreshed this way.
Not sure if this is the right path, but could not find a better alternative to account for the innumerable corrections to the purchasing documents that take place at our organisation.
Regards,
Wy.

Fund center and commitment item not updated

Hi!
We are using Funds Management together with SRM. When we change the value of e.g. cost center and not the account assignment itself we do not get an update on fund center. When changing account we do not get an update on commitment item either. This is standard SAP and we have been asked to use BBP_DOC_CHANGE_BADI. Have anyone else had this problem?
I would really appreciate if anyone have some code for this BADI or any other badi e.g. BBP_ECS_PO_OUT_BADI. It is only important that changes in PO when replicated to back end results in the correct update of commitment item and fund center.
Sincerely
Andres

Solved through BBP_DOC_CHANGE_BADI

Funds center and commetment item

Good evening!
We are HCM consultants. We were asked by our FI department to conduct a
post run for two personnel numbers in development system.
After the post run, the documents consider errors which say, for
example, that "in position 00001 21 993-05 commitment item was not
determined". 21 is a company code, 993-05 is a G/L account. This error
occurs for numerous accounts. Our FI says that they have customized
everything for 21 company code and have put commitment items for every
G/L account. They ask whether it is possible to customize fields for
funds center and commitment item in HCM, IT0015 where we determine
account assignment.
In the SAP course IPS910 they found a passage about HCM and FI
integration where is said that "Funds center and Fund can be determined
for org. unit/position/personnel. In addition to funds center and fund
there can be determind also a commitment item for info-types
considering account assignmet (0014,0015,2001-2005,2010)".
We in HCM guess that there is something wrong with FI customizing, 'cos
in HCM it's impossible to activate those fields, or even if it
possible - it's wrong.
The question is - is it possible to add fields for funds center in HCM
(IT0015) or it's not worth doing?
Best regards,
Eldar
Steps for Reconstruction
1. In HCM all the entris are standard. We made entries in IT0015,
started payroll and posting.
2. FI made their customizing for 21 company code.

Hello Eldar,
I will provide you some hints below.
1) To have the integration between PSM-FM and HCM, in PSM side you should check:
SPRO (IMG)
Public Sector Management
Funds Management Government
Actual and Commitment Update/Integration
Integration
Integration with Human Resources (HR)
Please check all the sub-menus there and the documentation available in from of each link. It is very good and provides some links for all the customizings that needs to be done.
2) Check also the configuration as it is described in the enclosed note 766613. It is related to view V_T588N.
3) If Funds Management and Controlling are updated in an integrated way such that the cost center is always the leading account assignment and the fund center is derived, the HR must not (and does not) support the maintenance of derived information (such as fund center). Thus there are the following three possible scenarios:
- Funds Management (FM) is not active.   -> HR doesn't show Fund Center
- FM is active but without CO-Integration-> HR shows Fund Center
- FM is active with CO Integration       -> HR doesn't show Fund Center
With CO Integration turned on, the derivation functionality is utilized to determine the Fund Center in HR. However, if you are looking for manual input in the FC field (and subsequent saving of this value on
the database), all I can provide would be a modification to inform HR that the FC field is active.
To perform that, you would need to make the following coding change to give HR the indication that the field should be displayed and edited:
FUNCTION FM_DC_GET_ACTIVE_DIMENSIONS:
    if ( CO-FM-Integration is on )
       IF ( l_f_fm01-co_integration = con_on ).         <   Delete
       IF ( l_f_fm01-co_integration = con_on AND     <   Insert
         NOT l_f_fm01-co_int_start_hr IS INITIAL ).     <   Insert
       IF ( l_f_fm01-co_integration = con_on AND
You will need to perform the necessary testing in HR to ensure that it is functioning as intended as I am unsure of the differences in the HR functionality between 46C and ECC 600.
These scenarios can be maintained with time dependence (active from-dates): There can be a period for the first, a second time interval for the second and a third time interval for the last scenario.
4) Please check if you have implemented note 918775. It should be present in your system
5) Please check if you have implemented note 755796. It should be present in your system
6) Please check also the note 701933.
I hope I could help you
Let me know your comments if I am going in the wrong direction.
Best Regards,
Vanessa.

Fund managment exceeding the budgeted and committed items

Dear All,
In my client place we implement the fund management. we create the department wise fund center and related committed items.
For example for the Fund center Administration Expenses- Committed item is Advertising expenses. When ever i made the payment to that particular expenses if i exceed the budgeted amount it will though error .
Like this i am getting for the some of the fund center and commitment items. I am having department wise fund center and commitment items list of 50 under that for 25 fund center whenever i exceed the budget it shows the error message for the some of the fund centers it not showing any warning message. and also allowing to make entries so my fund center report is showing negative values. so please guide to solve this issue.
Regards
girija

Dear Alex,
in my client in Availability control limit
they send for
MSL MSL001 pb selected proceed ++ Action 1 usage % 90
Msl Ms002 Action 3 usage % 100
it is correct or not pl guide to solve this issue for half of the fund center and commitment item when exceed the budget it is through error but for the remaining fund center is is accepting.
Regards,
girija
Edited by: k.r.girija devi devi on Nov 13, 2009 5:14 AM

Append variable and array items after a record array search

I would like to update a variable and array item after a record array search, and wanted to know what would be the best way of carrying it out in Javascript.
In this case, if a match is found between the variable and area item, then the postcode item should be appended to the variable.
The same needs to be done for the array items, but I reckon that a for loop would work best in this scenario, as each individual item would need to be accessed somehow.
Btw due to the nature of my program, there will always be a match. Furthermore, I need to be able to distinguish between the singleAddress and multipleAddresses variables.
Hopefully this code explains things better:
// before search
var singleAddress = "Mount Farm";
var multipleAddresses = ["Elfield Park", "Far Bletchley", "Medbourne", "Brickfields"];
// this is the record which the search needs to be run against
plot = [{
postcode: "MK1",
area: "Denbigh, Mount Farm",
postcode: "MK2",
area: "Brickfields, Central Bletchley, Fenny Stratford, Water Eaton"
postcode: "MK3",
area: "Church Green, Far Bletchley, Old Bletchley, West Bletchley",
postcode: "MK4",
area: "Emerson Valley, Furzton, Kingsmead, Shenley Brook End, Snelshall West, Tattenhoe, Tattenhoe Park, Westcroft, Whaddon, Woodhill",
postcode: "MK5",
area: "Crownhill, Elfield Park, Grange Farm, Oakhill, Knowlhill, Loughton, Medbourne, Shenley Brook End, Shenley Church End, Shenley Lodge, Shenley Wood",
// after search is run then:
// var singleAddress = "Mount Farm, MK1"
// var multipleAddresses = ["Elfield Park, MK5", "Far Bletchley, MK3", "Medbourne, MK5", "Brickfields, MK2"]
Fiddle here

I would like to update a variable and array item after a record array search, and wanted to know what would be the best way of carrying it out in Javascript.
In this case, if a match is found between the variable and area item, then the postcode item should be appended to the variable.
The same needs to be done for the array items, but I reckon that a for loop would work best in this scenario, as each individual item would need to be accessed somehow.
Btw due to the nature of my program, there will always be a match. Furthermore, I need to be able to distinguish between the singleAddress and multipleAddresses variables.
Hopefully this code explains things better:
// before search
var singleAddress = "Mount Farm";
var multipleAddresses = ["Elfield Park", "Far Bletchley", "Medbourne", "Brickfields"];
// this is the record which the search needs to be run against
plot = [{
postcode: "MK1",
area: "Denbigh, Mount Farm",
postcode: "MK2",
area: "Brickfields, Central Bletchley, Fenny Stratford, Water Eaton"
postcode: "MK3",
area: "Church Green, Far Bletchley, Old Bletchley, West Bletchley",
postcode: "MK4",
area: "Emerson Valley, Furzton, Kingsmead, Shenley Brook End, Snelshall West, Tattenhoe, Tattenhoe Park, Westcroft, Whaddon, Woodhill",
postcode: "MK5",
area: "Crownhill, Elfield Park, Grange Farm, Oakhill, Knowlhill, Loughton, Medbourne, Shenley Brook End, Shenley Church End, Shenley Lodge, Shenley Wood",
// after search is run then:
// var singleAddress = "Mount Farm, MK1"
// var multipleAddresses = ["Elfield Park, MK5", "Far Bletchley, MK3", "Medbourne, MK5", "Brickfields, MK2"]
Fiddle here

Tables related to PM order for actual and commitment items

Hello Experts,
I need help in finding the tables related to PM order for actual and commitment items.
I need develop a report which can show the actual and commitment items for each order and Operation/component under that each ITEM wise and its related documents.
For the component we can find the table RESB.
But i am getting the difficult to find the data related to Operation (services)
In my client we can able to see PM orders with activity types and SKF
How can build the logic to find the values for each operation item and its commitments (PO, PR) and actual that is FI documents
Please guide me the TABLES and fields or else give me the hints, how can find the tables
Thanks and Regards,
Narendra

Hi,
The tables are COEP (actuals) and COOI (commitments); that is if you mean the financial figures.
Regards,
Eli

GL Account and Commitment Items Integration

Hi Consultants,
Please explain the GL account and commitment items relationship. I know i can assign a commitment item to N number of GL accounts.
But can i assign many commitment items to one GL account?
Thank you.
Ekemini

Dear FM Expert,
I 'm new in the forum. I have some problem related to fmderive too. I have to do as your scenario that is to derive stat committment item to depreciation expense account. I use fmderive with user exit EXIT_SAPLFMDT_001 and include ZXFMDTU01
Coding to check AFAB tcode to derive the committment item. It's not work
if sy-tcode+0(4) = 'AFAB'.
    if I_FMDERIVE_SOURCE-account_number = 'xxx'.
      e_fmderive_target-commit_item = 'xxx'.
    endif.
ENDIF.
When I set trace , It seems work when test run for AFAB but when I do production run that need run in background. It does not work. Is there anything wrong with my code or Does fmderive work with Background job
Is there any suggesttion , please ?
Thank you very much,
one

How to start CRS and other services after rebooting nodes.

Hi,
i have created two node cluster database.how to start CRS and other service after rebooting nodes?
Thanks,

use crsctl command start...
$ORA_CRS_HOME/bin/crsctl start crsOr check status about CLusterware...
$ORA_CRS_HOME/bin/crsctl check crs
CSS appears healthy
CRS appears healthy
EVM appears healthyIf not OK... check log at $ORA_CRS_HOME/log/hostname/*
and check status database , service and etc...
use crs_stat
$ORA_CRS_HOME/bin/crs_stat -t
$ORA_CRS_HOME/bin/crs_stat if you find some service or instance ... not online...
use srvctl command, help to start
Get Help...
$ORA_CRS_HOME/bin/srvctl -h

How can i download and install lightroom after having formatted the hard disk?

How can I download and install lightroom after having formatted the hard disk?
I have the number of the order.

Lightroom - all versions
Windows
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
Mac
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

Financial transaction and commitment item category

Hello,
Can any one suggest what financial transaction and commitment item category can be used when creating the following commitment items:
u2022     Value added tax (VAT)
u2022     tax on profits
u2022     before-tax income
u2022     nett income
u2022     net financial result
And moreover, should such a commitment items be created?
Thanks
Irina

Hi Irina,
As I said, the real question is whether you are going to use these commitment items for budget management. If not, it does not really matter if it will be defined 50/2 or 50/3 - in any case, the AVC will not be applied to these lines. It's not even necessary to define a separate commitment item for these G/Ls; it's possible to define one dummy commitment item for all transactions which are not relevant for budget activities.
Regards,
Eli

G/L Accoutn and Commitment Item Relation

Hi Experts,
I have a question about relation of G/L Account and Commitment Item.
Is it possible that one G/L account have relation with several Commitment Item? (1:N relation)
If I don't use derivaiton rule or G/L master data, Can I input the Commitment item manually?
Please clarify !
Rgds
KyungIn

Hi,
1. No. The opposite is possible, i.e. one commitment item is derived from several G/Ls. If you want to derive different commitment items from one G/L, obviously, additional condition should be put in place.
2. Yes, if you don't provide any rule for the derivation of commitment item, you'll be able to enter it manually, but be aware that for some postings 'behind the curtains' you won't have the option to provide this data.
Regards,
Eli

How to set a fields: commitment item/funds center in migo

i am looking for this fields in migo but i can't find

Hello,
Please kindly check your customizing in the following menu path:
SPRO - Materials Management - Inventory Management and Physical Inventory - Settings for Enjoy Transactions - Settings for Goods Movements (MIGO)
Then you can choose for MIGO or per mvt type. If you have doubts, check the documentation available there.
In addition, please check the note that explains the integration between PSM-FM and MM related to commitment item.
1267998 - FI311 - Common issues related to this error message
I hope it resolves your problem
Best Regards,
Vanessa.

How update Fund Center and Commitment Item after posting

Similar Messages

Maybe you are looking for