How we create custom infotype and how to configure with its subtypes.

hai abap-hr gurus,
how to create custom infotype and how to configure with its subtypes. when i am creating infotypes i am not getting how to configure subtypes.
plz help me for this with an example code.
thanks..
kiran kumar

Hi Kiran,
    Please fallow the below steps to create the custom infotype. If you have any quires let me know.
For Creation of Infotype first Go to Transaction PM01, Enter the custom Infotype number which you want to create, it should be a 4 digit number and have to start with 9xxx.
then select the `Employee Infotype' radio button
after that select the `PS Structure Infotype'
then click on Create… A separate table maintenance window appears
then Create a PS structure with all the fields you want on the infotype
Save and Activate the PS structure
now Go back to the initial screen of PM01
Click on `All' push button. It takes a few moments
Click on `Technical Characteristics’. Infotype list screen appears
Click on `Change'(pencil) button
Now select your Infotype and click on `Detail' (magnifying glass) button
Give `T591A' as subtype table & also Give `T591S' as subtype txt tab
Give your subtype field as subtype field & Save and come back to PM01 initial screen
Click on `Infotype Characteristics' … Infotype list screen appears
Click on `Change' (pencil) button & on New Entries
and then Enter your Infotype number and short text Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference
to fill yours). Now save ur entries
Now the Infotype is created and ready to use.
If you want to change the layout of the Infotype as per your
requirement…
In the PM01 initial screen…Select `Screen' radio button and give
2000 as the screen name, then click on edit.
In the next screen.. Select `Layout Editor' and click `Change'.
Screen default layout appears…here you can design/modify the
screen..change the attributes of the fields..etc.
Save and activate. (Don't forget to `Activate at every level)
Regards,
Ramakrishna kotha.

Similar Messages

  • Material on how to create custom idoc and how to distribute it

    hi friends,
    can anyone suggest me some good material on custom idoc and how to trigger them.
    please let me know.
    regards,
    roberts.k

    Please check this link.
    http://help.sap.com/saphelp_46c/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    Cheers,
    Ramki.

  • How to create custom infotype for training and event management

    hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
    PS No – PA0000-> PERNR
    Name   - PA0001 -> ENAME
    IS PS.No. – PA0001-> PS no. of Immediate Superior
    IS name PA0001 -> ENAME
    thanx in advance
    afzal

    Hi,
    Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
    If you wish to create a PD infotype, use transaction PPCI to create the infotype.
    But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
    If you wish to create a PA infotype, use transaction PM01 to create the infotype.
    But before that you may be required to create a strcuture PSnnnn  (where nnnn is the infotype number) with all the fields relevant for the infotype.
    Regards,
    Srini

  • Can any 1 tell me how to create budget journal and how to enter journal ?

    hi all+
    Can any one tell me how to create budget journal and how to enter journal against that budget ?+
    Regards+
    Yasir+

    http://download.oracle.com/docs/cd/A60725_05/html/comnls/us/gl/budjrnl.htm#index-Budget-journals-Entering--0
    Enter budget journals to maintain an audit trail for your budget balances. You can use budget rules to calculate budget journal amounts automatically.
    When you post budget journals, the journal amounts update existing budget balances. You can review and change your budget journals before posting them.
    Attention: When you use budget rules in Journal Mode, General Ledger calculates the appropriate debit or credit needed to achieve the balance you enter for the account type.
    Prerequisites
    1. Define a budget
    2.Open one or more years for your budget
    3.Define a budget organization
    4. Assign the "Entered" budget entry type to the accounts for which you want to enter budget journals
    To enter budget journals for a single account:
    1. Navigate to the Enter Budget Journals window.
    2. Specify the Budget Organization for the account to which you want to budget. If the budget organization is password-protected, you must enter the password before you can enter budget journals.
    3. Enter the Budget you want to update. You cannot use a budget that is frozen.
    4. Enter the range of Accounting Periods to which you want to budget.
    5. Enter the Currency of the budget amounts you are entering. The accounts must be assigned to the budget organization for this currency.
    6. Choose Journal Mode from the region poplist to enter budget amounts in a journal format.
    You can also use Single Row Mode or Worksheet Mode to enter budget journal amounts. However, you can only generate budget journals from these entry modes when you use the Enter Budget Journals window.
    Additional Information: When you use Journal Mode, Balance Type is a display-only field. It displays Budget when you are entering budget journals. In the Enter Journals window, this field displays Actual when you are entering actual journals.
    7. Enter or query the Account to which you want to budget. You can also switch to Worksheet Mode to easily query accounts, then return to Journal Mode to enter budget journals.
    8. Enter a Debit or Credit amount for each period. Do not enter journal amounts if you want to use budget rules to calculate and distribute budget amounts.
    9. Choose Create Journals to create a budget journal batch. If you are using budgetary control, you specify a funds action when you create the batch.

  • How to create process chains,and how to use process like and or xor

    Hi,
    How to create process chains,and how to use process like and or xor.
    can any one please give me a example in each.
    Thanks,
    cheta.

    Hi Cheta,
    Here is step by step procedure to create process chains
    Process chain is nothing but executing a process ..(or) loading the data any process we can do in background.. that means.. automatically we can execute our process based on Time or any event..
    Creating Process Chains
    Prerequisites
    If you want to include a load process in the process chain, you need to have already created an InfoPackage.
    You cannot load flat file data from a client workstation in the background. For this reason, you have stored your data on an application server.
    Creating Process Chains
    You have the option of creating a process chain in the process chain maintenance screen directly or by using a maintenance dialog for a process:
    Creating a Process Chain Directly in the Process Chain Maintenance Screen
    You are in the BW Administrator Workbench.
    1. Click on the Process Chain Maintenance icon in the AWB toolbar.
    The Process Chain Selection dialog window appears.
    2. Choose Create.
    3. Enter the technical name and a description of the chain, and confirm your entry.
    The Add Start Process dialog window appears.
    4. Create a variant for a start process.
    1. a. On the Maintain Start Process screen, choose whether you want to schedule the chain directly or whether you want to start it using a metachain.
    2. b. If you choose to schedule the chain directly, enter the start date value for the chain under Change Selections and save your entries.
    The Maintain Start Process screen appears again.
    3. c. Save your entries, return to the previous screen and confirm your entries in the Add Start Process dialog window.
    You are taken to the Plan View of the process chain maintenance screen.
    In the left-hand area of the screen, a navigation area is displayed. In the right-hand area of the screen, the process chain is displayed.
    5. Use the drag-and-drop function to add the relevant processes into your process chain.
    You use the Process Types function to select the processes. This sorts the process types according to different categories. You can also call up InfoPackages and processes for the data target from the separate InfoSources and Data Targets navigation trees.
    Hope this helps
    Regards
    Karthik

  • Create Custom Infotype and handle Modification/Updation

    Hi All,
    I need to create a custom infotype and handle few checks while creating/updating the existing one.
    I have gone through the existing threads and have figured out the creation part.
    Could anyone tell me where i need to code the checks while creating/updating.
    I tried editing the PBO/PAI of the Module pool program, but as its standard, is asking for access key. Do we need to code this in any userexit or implement BADI.
    For example,
    a) i need to check that only one instance of the infotype should be valid for an  
        employee at a time
    b) This infotype should be created for only Employees and not contingent workers.
    c) Few fields on the body section needs to be updated/modified.
    Thanks and Regards
    Manish.

    You can use the IN_UPDATE or AFTER_INPUT Methods of the BAdI HRPAD00INFTY to perform your validations.
    Arya

  • How to create new user and How can i assign end user roles

    Hi,
    I am new to SAP, please explain how to create end users and their roles
    Thanks
    ravi

    Hi,
    Roles are decided by IT managers. Suppose if Persons who are working in shopfloor or production side
    give authorization to Production order create , change and Confirm like that etc
    1. In role maintenance (transaction PFCG), choose the Authorizations tab page.
    2. To change the authorization data for the transactions assigned to the role, choose Change Authorization Data or Expert Mode for Profile Generation. Otherwise, a dialog box appears in expert mode (see Regenerating an Authorization Profile After Changes).
    Please take telp from Basis person also refer this link,
    http://help.sap.com/saphelp_46c/helpdata/EN/52/6714a9439b11d1896f0000e8322d00/frameset.htm
    Thanks

  • How to define custom event and how to trigger the defined event

    hi,guys
    hurry issue....................hope get help.
    I am using oracle weblogic 10gr3 portal.and we choiced java portlet.as of now,we got some question about custom Event.hope you can give some idea....
    thank you so much.
    question detail:
    1.for java portlet ,how to define custom event.
    2.how to trigger this event.
    3 about the data,may be sometime need to transit Biz data.
    auctully,I just want to implements between two portlets communicate.
    for example:
    existing portletA,portletB.
    portletA is a list,like:
    A AA <button>
    after I click this buttom,then portletB will be effect,it means they are interact with each other.
    does anybody hit this issue before,if you solved pls share me .
    thank you for you help....

    Hello,
    Please note that everything below applies to JSR168 portlets ONLY- JSR286 portlets and other portlet types handle events a little differently.
    From inside your JSR168 portlet you can send an event during processAction or when receiving another event by using the PortletBackingContext object, such as:
    import javax.portlet.ActionResponse;
    import javax.portlet.ActionRequest;
    import javax.servlet.http.HttpServletRequest;
    import com.bea.netuix.servlets.controls.portlet.backing.PortletBackingContext;
    public void processAction(ActionRequest actionRequest, ActionResponse actionResponse)
    HttpServletRequest httpRequest = (HttpServletRequest) actionRequest.getAttribute("javax.servlet.request");
    PortletBackingContext portletBackingContext = PortletBackingContext.getPortletBackingContext(httpRequest);
    portletBackingContext.fireCustomEvent("customEvent", "This is a custom event");
    To receive an event, in your .portlet file you just need to put in a "handleCustomEvent" tag specifying which method to call when the event is received, such as:
    <?xml version="1.0" encoding="UTF-8"?>
    <portal:root xmlns:netuix="http://www.bea.com/servers/netuix/xsd/controls/netuix/1.0.0"
    xmlns:portal="http://www.bea.com/servers/netuix/xsd/portal/support/1.0.0"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://www.bea.com/servers/netuix/xsd/portal/support/1.0.0 portal-support-1_0_0.xsd">
    <netuix:javaPortlet title="Listening Portlet" definitionLabel="yourPortletName">
    <netuix:handleCustomEvent event="customEvent" eventLabel="customEvent" filterable="true" description="custom event handler">
    <netuix:invokeJavaPortletMethod method="processCustomEvent"/>
    </netuix:handleCustomEvent>
    </netuix:javaPortlet>
    </portal:root>
    Then, in your receiving portlet the method "processCustomEvent" would receive the event, such as:
    public void processCustomEvent(ActionRequest actionRequest, ActionResponse actionResponse, Event event)
    The event payload can be any Serializable object you want, but for forward-compatibility with JSR286 it would be ideal if it had a valid JAXB binding.
    Kevin

  • How to create signed applet and make it work with browser

    i hav an applet that needs to write a file to onto local system resource. i came to know that the applet needs to be signed. so i searched some guides to create a signed applet but most of them specify how to use it with applet viewer and not on a browser. plz help me with how to sign an applet and and allow it to write a file from within a browser.

    On linux, something like this:
    keytool -genkey -alias signSocket -keystore socketstore -keypass abc123 -dname "cn=your name" -storepass abc123
    jar cvf Socket.jar *.class
    jarsigner -keystore socketstore -storepass abc123 -keypass abc123 -signedjar SSocket.jar Socket.jar signSocket
    And in html:
    CODE = "YourClass.class"
    ARCHIVE = "SSocket.jar"
    ...

  • How To create custom login and create user pages

    Where can I find documentation that discusses how I can create a custom login page and create new user page?
    Also, I cannot find how to get away from the default login page.
    I am using 9iAS/Portal R2.
    Bill G...

    Well - I did find some docs;
    Chapter 8 of the Oracle9 iAS Single Sign-On.pdf file titled "Customizing the Single Sign-On Interface" has some good info but I'm wondering about the "create new user part".
    Bill G...

  • How to create a variable, and how to use the same across all the reports?

    Hi,
    Is there any possibility of creating a variable at once and making use of that across in all the Crystal Reports?
    Thanks In advance for your time and solution.

    MohanMRK,
    can you describe how you get the value for this variable?
    is it calculated on one report and then you want to pass it to a 2nd report? if that's the case, what you can do is have the reports linked via an opendocument link and pass the value to the 2nd report as a parameter. the value / parameter is only shared when you press the opendocument hyperlink.
    please see the sdk library [here |http://www.sdn.sap.com/irj/boc/sdklibrary]and scroll down to the opendocument section near the bottom.
    if you are just trying to find a way to share a calculation across reports look into creating a Custom Function which can be added to your repository. please note that this will not pass a calculated value across 2 or more reports, but will just have a shared method of making the calculation.
    as Abhilash mentioned before, there's no way to use an actual Variable across 2 separate reports without them being a main report and subreport(s). in that case you'll want to look into Shared Variables.
    cheers,
    jamie

  • How to create a Ticker and How to populate value in it ??

    Hi Team,
    Can any one help me out to create a simple ticker ..
    Can you take me through the steps .... I tried some which are not working ..
    I have added a form where I have a submit button with a ticker and other fields, and the output is a table with two fields ... where both the fields has only  one value ..
    I want these values to be displayed in Ticker box ... How can I do it ??
    Regards,
    chan

    Hi Prachi,
    Thanx for your reply.
    Let me explain my scenario. It is very simple .. I have a BW Query where the put put is Netsales till yesterday. The output is a 1 row 1 column value which should be displayed in a ticker with respective date (date single value ie till yesterday).
    Query is very simple. As you said It can be used only in a form.
    In a form I have added a ticker. In style -> condition -> @Net_Sales==true where <b>@Net_sales</b> is the NetSales value string. It is not gining any error but, output is not displayed where as If I use a text box to display the same value is displayed.
    I know that I m missing some settings, can u guide me to do that properly.
    Regards,
    Chan

  • How to create database connection and how to call it using Java

    Hi,
    Good day! I'd like to know how I can create a db connection in JDev, then use this connection to retrieve data using a Java Class? I've seen using New Gallery > Database Connection. But I'm not sure how I can access this connection using Java and display some output from the retrieved records.
    Any steps/tutorial link is appreciated.
    Thanks in advance,
    Rian

    Hi,
    If you need to access the connection in the entity object then refer http://download.oracle.com/docs/cd/E15523_01/web.1111/b31974/bcadvgen.htm#BABEIFAI i.e in MODEL.
    But if you want to access connection in ViewController part of application then you need to do it manually.For this i am giving you my code for reference.------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
    import java.sql.Connection;
    import java.sql.ResultSet;
    import java.sql.SQLException;
    import java.sql.Statement;
    import javax.faces.context.FacesContext;
    import oracle.jdbc.pool.OracleDataSource;
    public class DataHandler {
    String jdbcUrl = null;
    String userid = null;
    String password = null;
    Connection conn;
    public static final String CONNECTION_STRING =
    FacesContext.getCurrentInstance().getExternalContext().getInitParameter("connectionString");
    public static final String USER_NAME =
    FacesContext.getCurrentInstance().getExternalContext().getInitParameter("userName");
    public static final String PASSWORD =
    FacesContext.getCurrentInstance().getExternalContext().getInitParameter("password");
    public DataHandler(String jdbcUrl, String userid, String password,
    boolean shouldConnect) throws SQLException {
    this.jdbcUrl = jdbcUrl;
    this.userid = userid;
    this.password = password;
    if (shouldConnect) {
    connect();
    public void connect() throws SQLException {
    OracleDataSource ds;
    ds = new OracleDataSource();
    ds.setURL(jdbcUrl);
    conn = ds.getConnection(userid, password);
    public Connection getConnection() {
    return conn;
    public ResultSet executeQuery(String sql) throws SQLException {
    Statement s = conn.createStatement();
    return s.executeQuery(sql);
    public void closeConnection() throws SQLException {
    if (!conn.isClosed()) {
    conn.close();
    ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  • How to create own SplitPaneDivider and how to use it

    Hi,
    I'm trying to create my own SplitPaneDivider and set it for one of my SplitPanes by doing:
    JSplitPane splitterPanel = new JSplitPane(JSplitPane.HORIZONTAL_SPLIT, true,listTablePanel, editorPanel);
    splitterPanel.setOneTouchExpandable(true);
    splitterPanel.setUI(new MySplitPaneUI());
    splitterPanel.updateUI();
    splitterPanel.setBorder(BorderFactory.createEmptyBorder());
    splitterPanel.setDividerSize(8);
    When I do this, I see no difference when I change it to MetalSplitPaneUI
    Can anyone tell me what I'm doing wrong.
    Thanks in advance
    Hugo

    Let me know if any clarification is needed
    Kudos are always welcome if you got solution to some extent.
    I need my difficulties because they are necessary to enjoy my success.
    --Ranjeet
    Attachments:
    VI.vi ‏13 KB

  • How to create an excel and how to export data to that excel ALBPM

    Hi,
    anyone can u please give me some idea to create and export the data to excel.i have creatde COM Bridge as external resource.

    I would suggest something like:
    DBAdapter --> Bpel Process --> File Adapter --> write file to location (you can write in csv which can be imported into xls)
    Read Location --> FileAdapter --> Bpel Process --> Email Activity
    Regards,
    Anshul

Maybe you are looking for

  • Test Engineer (electro-optical) full-time position in Los Angeles

    I'm a recruiter working with OSI Optoelectronics and we are looking for a Test Engineer to design, build, modify, repair, troubleshoot and debug optoelectronic test systems. This is a full-time position located in Hawthorne CA. Must be US Citizen or

  • How do i create a recessed box

    i know how to make a box with rounded corners appear to be on top of the background by putting a shadow on it.  but how do i make the box with rounded corners look like it's on the bottom/recessed with the backgroun being on top...

  • Lumia 520's camera is not working

    My nokia lumia 520 camera key does not work ? Moderator's note: The post was edited. Better subject was provided.

  • Document/Literal SOAP format generation using jdeveloper 10.1.2.0.0

    Hi, Can anyone tell me please how to create Document/Literal SOAP format using jdeveloper 10.1.2.0.0 ?? Thanks in advance, Khalil

  • Submission of jobs in  OEM

    Hi, I had config oem on win NT and server running on true64 Unix. Iam not able to config.. nodes properly. I had config manuly, and using dbastudio. I can't submit export or Import Jobs.Pl. let me know is there any config.. iam missing. Pl. help me o