How we create workflow using sharepoint designer for first review the documnet than go for approve the document.

Hi to all
I have team site in site collection under this i have Shared Document library. Now i want to create the workflow for the shared Document library. How i will create workflow using sharepoint designer for first review the documnet than go for approve
the document.

Hi ,
According to your description, my understanding is that you want to create a workflow which contains review and approval process.
For implemening your requirement, you can create a workflow containing two steps. The first step is used to collect user information and set workflow variables, and the second step is used to verify whether the reviewer approve. If the reviewers complete
approving, a pproval workflow is started. The whole workflow is like :
More information, please refer to the links below:
http://www.documentmanagementworkflowinfo.com/sharepoint-video-tutorials/create-document-review-workflow-sharepoint-designer-2007.htm
http://office.microsoft.com/en-us/sharepoint-designer-help/watch-this-design-a-document-review-workflow-solution-HA010256417.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Similar Messages

Getting error while publishing workflow using SP designer for SharePoint 2013

Hi,
I am try to setup Workflow manager for our sharepoint applications.
WF manager set ran without any issue.
I registered the SPWorkflow service which succeeded as well. The Workflow service application shows "Workflow is connected"
I am creating a workflow using sharepoint designer using my credential (not Service account). I am able to save it but while publishing, its prompting with an error.
The error says "Errors were found while compiling the workflow.The workflow files were saved but cannot run." Clicking advanced button show
"Microsoft.SharePoint.SPException: We're sorry, we weren't able to complete the operation, please try again in a few minutes. If you see this message repeatedly, contact your administrator.
at Microsoft.SharePoint.SPScaleOutDatabaseMap.CreateSqlSession(ISPScaleOutDatabaseMapProvider mapProvider, Byte[] compositeKey, Guid forceRefreshVersion, Guid& version)
at Microsoft.SharePoint.SPScaleOutDatabaseCommandExecutor.Execute(ExecuteDelegate operation, ISPScaleOutDatabaseMapProvider mapProvide"
Any help would be highly appreciated
Thanks,

Hi,
According to your post, my understanding is that you got error while publishing workflow using SharePoint designer for SharePoint 2013.
Please check whether the Central Admin > Manage Service Application-> “App Management Service” is started.
Please check whether the “Configure service application associations”, ”App Management Service” is already associated.
Then please check whether the “Manage Services on server” and the “App Management Service” is started.
In addition, please try to re-register Workflow Service.
If the issues still exists, please follow the steps in the
Steps to Verify that Server Is Correctly Set Up. After you verified that the server is correctly set up, follow the steps in the
Steps to Troubleshoot Workflow Management Service and
Troubleshooting the Service Bus for Windows Server then retry your action related to publishing workflows
More information:
http://wp.ahcheng.com/2013/03/23/error-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run/
http://sp2013.pro/2013/04/solution-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run-cannot-set-unknown-member/
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Statemachine Workflow using sharepoint designer

Hello,
I need statemachine Workflow using sharepoint designer only.
Please provide any link or sample solution

Try below:
http://webcache.googleusercontent.com/search?q=cache:_SML6gV0Pa0J:sharepointgypsy.blogspot.com/2011/10/create-state-machine-workflow-with.html+&cd=1&hl=en&ct=clnk&gl=in&client=firefox-beta
http://webcache.googleusercontent.com/search?q=cache:qnXWgOaSTXYJ:sharepointgypsy.blogspot.com/2011/10/create-state-machine-workflow-with_26.html+&cd=2&hl=en&ct=clnk&gl=in&client=firefox-beta
http://sharepoint.stackexchange.com/questions/36969/how-to-create-a-customized-yet-still-semi-basic-state-machine-workflow-with-sh
If this helped you resolve your issue, please mark it Answered

Web part created on a subsite for a sharepoint list in another site using sharepoint designer, to show only the subsite's reports. Connection dropping off and showing all the reports

I crated web parts in the sub-sites (we have about 10 subsites) using sharepoint designer from a main list in another site. Then used web part to show only the ubsite's reports - using connection to the main list. Problem is, the connection
is dropping off and showing all the reports on the main list that are confidential. this has happened 3 time lately. Could someone explain why it happens some times? I had to fix it by adding the web part again and connecting it
Thanks, Subathy.

Hi George,
If you want to use a top level site "department" list column in all sub-sites, you can go to top level site and create a
lookup type "Site column" to look up the value from the department list, then all sub-sites can use this lookup type site column created in top level site.
Thanks
Daniel Yang
TechNet Community Support

Leave Request Workflow using SharePoint Designer

Hi Support,
Can you give me a link or specific procedure on how to make leave request using sharepoint designer connected to sharepoint foundation 2013. This is my first time to make it, s there's something doubt in my mind. Please help me as soon as possible.
Thanks
Best Regards,
Bishelp :)

Hi Bishelp,
Besides the article which cool_anurag suggested, Here is a video about Leave request Workflow please check whether it is helpful:
https://www.youtube.com/watch?v=9IYI8xHpBPE
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

How to convert document file in PDf format through workflow using sharepoint designer

Please suggest me solution it's urgent.....please.

Hi Anil,
If Word Automation Services is installed in your environment then that may be an option (Providing you are only interested in converting MS-Word documents). However SharePoint does not ship with an out-of-the-box workflow activity that makes use of this.
You may want to consider some third party software that supports formats other than MS-Word as well and comes with workflow actions for SharePoint Designer (and Nintex Workflow) out of the box. Have a look at the
Muhimbi PDF Converter for SharePoint.
Disclaimer, I worked on this product so I am obviously biased. (It works great though :-)

How to implement schedule workflow using SharePoint Designer?

Hi All,
Please let me know , How to implement the schedule workflow using Share Point Designer.
Thank You.
Regards,
~Sri

+1 to this. The closest that you'll get with list / level features is using Information Rights. You can trigger workflows based on time/date columns, which may serve your needs.
Failing that, you will indeed need a custom timer job.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

SharePoint Approval Workflow using SharePoint Designer in SharePoint Foundation 2013

I am unable to do SharePoint Designer workflow for approval process and I didnt get any Approval process in Actions in SharePoint designer Workflow also I don't find workflow features in Site collection features SharePoint 2013.
Even I am not able to do simple Out of the box Approval Workflow.
Kindly help me with this

Unfortunately, Out of the box workflows are not available in SharePoint foundation 2013, you need at least the standard version of SharePoint 2013.
You can still create .Net Workflows using the 2010 plateform.
Take a look at this great comparative between the three versions of SharePoint 2013 :
http://blog.blksthl.com/2013/01/14/sharepoint-2013-feature-comparison-chart-all-editions/

Sharepoint Forms and Custom Lists and Workflows using Sharepoint Designer

I created a Custom SharePoint List with a custom work flow. Basically the list does the following:
Group A initiates the list, fills in all the information
Group A will check a box based on a Y/N question, the driver of the work flow is if the Y/N question is answered with an Y, then Group B will get a task assigned and an email notification will go to Group B to continue the work flow.
Group B will fill out information and check Y/N question, if answer is returned Y it will go to Group C via the same method as above.
What I need is as the form goes from one group to the next how can I make sure that Group C doesn't see the responses from Group B? How do I write this into the workflow?

I think now I can add screen shots to explain what I need to do better.
I created a custom sharepoint list. Users click on Add new Item and Group A will answer generic questions until they get to Continue to Dispute to IQ (Yes/no) Checkbox. If they answer Yes, the workflow will start and create a task for Group B
(IQ Group). Group B will answer 4 questions (IQ Responses, IQ Notes, IQ Name and Date). Group B will check Yes or No to Continue Dispute to QA (Group C).
See Screen shot.
What we would like for the workflow to do is based on the Yes or No check boxes (Continue to IQ or QA). If Yes is checked then the workflow will generate a task in the task list. We don't want Group B and C to see each other's responses. I set up a workflow
using impersonate steps, but am not sure if this is correct. Can you look at the workflow steps below and let me know if this is right?

How to Create our own Custom Design for UI Elements in WebDynpro Java

Hi Experts,
As of now i am using the Standard design for the UI Elements in the WebDynpro Java Applications.
For example:
header1,header2,monospace etc are available in design for UI Elements.
Now i want to give my custom design to the UI Elements.
So how can i create this. and Is it possible to create in NWDS.
Thank You.
DS

Hi DS
Eclipse Theme Editor for NetWeaver 2004
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a026b4ce-de48-2a10-7285-fb457ee6c7ed
Eclipse Theme Editor for NetWeaver 7.0
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/136dd890-0201-0010-1b9d-bd09a0d3b1d8
Hope this will be use ful for u
Regards
sriram

How to create a pointy round object for approval seal

Hi - I'm really not great with Illustrator so I'm hoping someone can help me. See the image below:
I downloaded the deaf friendly seal as a vector image from a stock website. Now my co-workers want me to add that "sunburst" round edge and put it behind the round part of the deaf friendly one. Rather than download another vector image of the pointy round thing, I'd like to try to do it myself but I'm not good with Illustrator.
Can someone provide a tutorial or help on how to create that round object with points around it - maybe a quick and easy way to do it?
Thanks in advance.

Thanks to all of you. Appreciate all of the help. The result:

How to create a long text in VF01 before saving the document

Hi,
Im tring to create a perfama invoice with the help of delivery number and document type (F8) , by pressing the enter key im going to the second screen, once i get into the second screen im suppose to get the Header text and Item text, i.e long text for both header and item..
Can u please help me to solve this issue.
Thanks,
Reni

Hi
Generally in the Sales Flow all the Header and Item texts from sales order are copied into Delivery when it is created and when you create a Invoice using that delivery all those texts are copied into the invoice. check with functioanl consultant once and see.
We can also create/upload the texts explicitely using the fun modules
CREATE_TEXT and SAVE_TEXT .
<b>Reward points for useful Answers</b>
Regards
Anji

Workflow created using sharepoint designer 2013 is not getting started and the initiator is Anonymous.

Hi All,
I have created a Site and List Workflow using SharePoint designer 2013, its a simple list workflow with one stage init on creating an item.
When i verified the status of workflow its showing as initiator = Anonymous and Internal Status - Not started. Please a screen shot below
Looking forward for your help.
Thanks in Advance.
Sunitha

Below is the solution.
Solution:.
check
list in workflow manager server :
1. Check https://[wfms]:12290 or http://[wfms]:12291 if they are responding 2. Check
”WorkflowMgmtPool” is started 3. Following services are running
Workflow Manager Backend
Service Bus Message Broker
Service Bus Gateway
Windows Fabric Host Service (FabricHostSvc)
4. Get workflow farm information , workflow database by Start Workflow
Manager PowerShell get-WFfarm 5. Check if the Workflow Manager farm running(workflow service backend and front end should be rennin) by Start Workflow Manager
PowerShell get-WFfarmStatus
6. Check oAut in accessible by http:// [wfms]:12291/$SYSTEM/$Metadata/json/1
7. Restart the WorkflowServiceBackend service
net stop WorkflowServiceBackend
net start WorkflowServiceBackend
Reference Link
http://blogs.msdn.com/b/laleh/archive/2014/09/03/sharepoint-2013-workflow-troublehsooting.aspx
Thanks all.
Sunitha

Error while saving a workflow via sharepoint designer: Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.

While saving a workflow using SharePoint designer on a SharePoint site, I get the following error:
Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.
Steps to recreate error:
Login to the WFE server hosting IIS and workflow manager, open SharePoint Designer 2013 and login to a SharePoint site.
Access the list using SharePoint Designer 2013, in the workflow section, click new workflow.
In the new workflow dialog, enter workflow details, click save (see screenshot below).
Error message is displayed as below:
After restarting SharePoint Designer, the saved workflow is not seen in the site/workflows or list/workflow section.
Workaround
When the above steps are repeated while accessing the site via SPD from any other box besides the WFE/Workflow manager host server, the error is not encountered and its possible to save/publish workflows.
Notes
Workflow Manager 1.0 is installed.
The site has been registered with Workflow manager using Register-SPWorkflowService
cmdlet.
Any clue on why is this happening?

Hi Vivek,
Please close your SharePoint Designer application, clear/delete the cached files and folders under the following directories from your server installed SharePoint Designer, then check results again.
<user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
<user profile>\appdata\local\microsoft\websitecache\<sitename>
http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error while opening list workflow in SharePoint designer 2010

Hi,
I am trying to open list workflow in SharePoint designer 2010,its showing me the following page.
Please help me how will be able to edit the workflow.
While i click on "export to visio",its showing the error as "SharePoint designer encountered an error generating the visi workflow drawing".
Please help me to get the logic of the workflow,so that i can create new one.
Thank you

Hi Aditi,
Which type of workflow did you use?
Did you create the workflow using SharePoint 2010 Designer or built-in workflow template?
If the workflow was created using SharePoint 2010 Designer, for editing the workflow using SharePoint Designer, open the site with SharePoint 2010 Designer, then click the 'Workflows' in left panel. Then in the right panel, click the workflow that you
want to edit, then click 'edit workflow' under Customization.
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

How we create workflow using sharepoint designer for first review the documnet than go for approve the document.

Similar Messages

Maybe you are looking for